static void cy_wq_function(struct work_struct *work)
{
int status;
int is_inserted;
int ret;
int retry_count;
down(&cy_as_device_controller->thread_sleep_sem);
down(&cy_as_device_controller->wq_sema);
cy_as_device_controller->cy_work->f_isrunning = 1;
up(&cy_as_device_controller->wq_sema);
status = cy_as_device_controller->cy_work->f_status;
g_SD_flag = is_inserted = cy_as_hal_detect_SD();
if (cy_as_device_controller->cy_work->f_reload == 1) {
cy_as_device_controller->cy_work->f_reload = 0;
cy_as_hal_enable_power(cy_as_device_controller->hal_tag, 1);
}
#ifdef __USE_CYAS_AUTO_SUSPEND__
cyasdevice_disable_thread();
#endif
if (!is_inserted) { /* removed SD card. */
cy_as_hal_print_message(KERN_ERR
"[cyasdevice.c] %s: SD card is removed.\n", __func__) ;
if (status) {
cy_as_hal_print_message(KERN_ERR
"[cyasdevice.c] %s: cyasblkdev_blk_exit\n", __func__) ;
down(&cy_as_device_controller->wq_sema);
cyasdevice_leave_standby();
cy_as_device_controller->cy_work->f_status = 0x0;
up(&cy_as_device_controller->wq_sema);
cyasblkdev_blk_exit();
retry_count = 0;
while (!cy_as_device_init_done) {
if (++retry_count == 5) {
cyasdevice_reload_firmware(0);
break;
}
msleep(10);
}
}
down(&cy_as_device_controller->wq_sema);
cyasdevice_enter_standby();
up(&cy_as_device_controller->wq_sema);
msleep(10);
} else { /* insterted SD card. */
cy_as_hal_print_message(KERN_ERR"[cyasdevice.c] %s:\
leave standby\n", __func__) ;
down(&cy_as_device_controller->wq_sema);
cyasdevice_leave_standby();
up(&cy_as_device_controller->wq_sema);
retry_count = 0;
while (!cy_as_device_init_done) {
if (++retry_count == 5) {
cyasdevice_reload_firmware(0);
break;
}
msleep(10);
}
cy_as_hal_print_message(KERN_ERR
"++++++++++++ [cyasdevice.c] %s: SD card is inserted.\n",
__func__) ;
if (cy_as_device_controller->cy_work->f_reload == 2) {
cy_as_device_controller->cy_work->f_reload = 0;
ret = cyasblkdev_check_sdcard();
if (ret == 1) {
cy_as_hal_print_message(
"[cyasdevice.c] %s: cyasblkdev_blk_exit\n",
__func__) ;
cyasblkdev_blk_exit();
status =
cy_as_device_controller->cy_work->f_status = 0x0;
} else if (ret < 0) {
cyasblkdev_blk_exit();
cy_as_hal_print_message(
"[cyasdevice.c] %s: reload firmware\n", __func__) ;
status = cy_as_device_controller->cy_work->f_status = 0x0;
} else {
#ifdef __USE_CYAS_AUTO_SUSPEND__
cyasdevice_enable_thread();
#endif
}
}
if (status == 0) {
cy_as_hal_print_message(KERN_ERR
"[cyasdevice.c] %s: cyasblkdev_blk_init\n", __func__) ;
cy_as_device_controller->cy_work->f_status = 0x1;
retry_count = 2;
while (retry_count--) {
ret = cyasblkdev_blk_init(0, 0);
if (ret) {
cyasblkdev_blk_exit();
msleep(10);
cyasdevice_reload_firmware(-1);
msleep(10);
} else
break;
}
if (ret) {
down(&cy_as_device_controller->wq_sema);
cyasdevice_enter_standby();
up(&cy_as_device_controller->wq_sema);
msleep(10);
cy_as_device_controller->cy_work->f_isrunning = 0;
up(&cy_as_device_controller->thread_sleep_sem);
return;
}
}
#ifdef __USE_CYAS_AUTO_SUSPEND__
/* cyasdevice_enable_thread(); */
#endif
}
cy_as_device_controller->cy_work->f_isrunning = 0;
up(&cy_as_device_controller->thread_sleep_sem);
return;
}
int cy_as_diagnostics(cy_as_diag_cmd_type mode, char *result)
{
uint32_t retVal = 0;
#ifdef __CYAS_SYSFS_FOR_DIAGNOSTICS__
cy_as_device_handle cyas_hd = cyasdevice_getdevhandle();
switch( mode )
{
case CY_AS_DIAG_GET_VERSION:
{
cy_as_get_firmware_version_data ver_data = {0};
const char *str = "" ;
cyasdevice_leave_standby();
retVal = cy_as_misc_get_firmware_version(cyas_hd, &ver_data, 0, 0) ;
if (retVal != CY_AS_ERROR_SUCCESS) {
cy_as_hal_print_message("cy_as_diagnostics: cannot get firmware version. reason code: %d\n", retVal) ;
sprintf( result, "fail - %d", retVal );
return retVal;
}
if ((ver_data.media_type & 0x01) && (ver_data.media_type & 0x06))
str = "nand and SD/MMC." ;
else if ((ver_data.media_type & 0x01) && (ver_data.media_type & 0x08))
str = "nand and CEATA." ;
else if (ver_data.media_type & 0x01)
str = "nand." ;
else if (ver_data.media_type & 0x08)
str = "CEATA." ;
else
str = "SD/MMC." ;
cyasdevice_enter_standby();
cy_as_hal_print_message("<1> cy_as_device:_firmware version: %s "
"major=%d minor=%d build=%d,\n_media types supported:%s\n",
((ver_data.is_debug_mode) ? "debug" : "release"),
ver_data.major, ver_data.minor, ver_data.build, str) ;
sprintf( result, "%d.%d.%d", ver_data.major, ver_data.minor, ver_data.build );
}
break;
case CY_AS_DIAG_DISABLE_MSM_SDIO:
break;
case CY_AS_DIAG_ENABLE_MSM_SDIO:
break;
case CY_AS_DIAG_ENTER_STANDBY:
cyasdevice_enter_standby();
break;
case CY_AS_DIAG_LEAVE_STANDBY:
cyasdevice_leave_standby();
break;
case CY_AS_DIAG_CREATE_BLKDEV:
retVal = cyasblkdev_blk_init(0, 0);
break;
case CY_AS_DIAG_DESTROY_BLKDEV:
cyasblkdev_blk_exit();
break;
case CY_AS_DIAG_SD_MOUNT:
{
int i;
uint32_t count = 0 ;
int bus = 1 ;
cy_as_storage_query_device_data dev_data ;
cy_as_storage_query_unit_data unit_data = {0} ;
cyasdevice_leave_standby();
actdata = (uint8_t *)cy_as_hal_alloc(CYASSTORAGE_MAX_XFER_SIZE);
expdata = (uint8_t *)cy_as_hal_alloc(CYASSTORAGE_MAX_XFER_SIZE);
cy_as_hal_mem_set(actdata, 0, CYASSTORAGE_MAX_XFER_SIZE);
cy_as_hal_mem_set(expdata, 0, CYASSTORAGE_MAX_XFER_SIZE);
retVal = cy_as_storage_device_control(cyas_hd, bus, 0, cy_true, cy_false, cy_as_storage_detect_SDAT_3, 0, 0) ;
if (retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR"ERROR: Cannot set Device control - Reason code %d\n", retVal) ;
return retVal;
}
// Start the storage API and get a handle to the device we are interested in.
retVal = cy_as_storage_start(cyas_hd,0,0) ;
if (retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR"ERROR: Cannot start storage stack - Reason code %d\n", retVal) ;
return retVal;
}
retVal = cy_as_storage_query_media(cyas_hd, cy_as_media_sd_flash, &count, 0, 0) ;
if (retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR"ERROR: Cannot query SD device count - Reason code %d\n", retVal) ;
return retVal;
}
if (!count)
{
cy_as_hal_print_message(KERN_ERR"ERROR: SD storage media was not found\n") ;
return retVal;
}
else
{
cy_as_hal_print_message(KERN_ERR"SUCCESS: %d SD device(s) found. SD_CLK, SD_CMD, and SD_D0 connected\n", count) ;
dev_data.bus = 1 ;
dev_data.device = 0 ;
retVal = cy_as_storage_query_device(cyas_hd, &dev_data, 0, 0 );
if(retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR"ERROR: Cannot query SD device count - Reason code %d\n", retVal) ;
return retVal;
}
else
{
#if 1 //skkm
retVal = cy_as_storage_change_sd_frequency(cyas_hd, bus, 0x11, 24, 0, 0);
if(retVal != CY_AS_ERROR_SUCCESS) {
cy_as_hal_print_message("%s: Cannot control cy_as_storage_change_sd_frequency - reason [%d]\n", __func__, retVal) ;
}
#endif
cy_as_hal_print_message(KERN_ERR"Checking for SD_WP Connectivity:\n");
if(dev_data.desc_p.writeable)
{
cy_as_hal_print_message(KERN_ERR" SD media is not write protected \n") ;
}
else
{
cy_as_hal_print_message(KERN_ERR" SD media is write protected %d\n", retVal) ;
}
unit_data.device = 0 ;
unit_data.unit = 0 ;
unit_data.bus = bus;
retVal = cy_as_storage_query_unit(cyas_hd,&unit_data, 0, 0) ;
if (retVal != CY_AS_ERROR_SUCCESS) {
#ifndef WESTBRIDGE_NDEBUG
cy_as_hal_print_message(KERN_INFO"%s: cannot query %d device unit - reason code %d\n",
__func__, unit_data.bus, retVal) ;
#endif
return retVal;
}
}
}
cy_as_hal_set_ep_dma_mode(4, false);
cy_as_hal_set_ep_dma_mode(8, false);
start_unit = unit_data.desc_p.unit_size - MAX_DRQ_LOOPS_IN_ISR*2;
for ( i = 0 ; i < CYASSTORAGE_MAX_XFER_SIZE ; i++ )
{
expdata[i] = i;
}
}
break;
case CY_AS_DIAG_SD_READ:
{
int i;
int bus = 1 ;
struct timespec mStartTime, mEndTime;
long second,nano;
long mDelta;
mStartTime = CURRENT_TIME;
retVal = cy_as_storage_read(cyas_hd, bus, 0, 0, start_unit, actdata, MAX_DRQ_LOOPS_IN_ISR) ;
if (retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR "ERROR: cannot read from block device - code %d\n", retVal) ;
break;
}
mEndTime = CURRENT_TIME;
second = mEndTime.tv_sec - mStartTime.tv_sec;
nano = mEndTime.tv_nsec - mStartTime.tv_nsec;
mDelta = (second*1000000) + nano/1000;
cy_as_hal_print_message("<1>%s: reading speed = %d KByte/s\n", __func__, (int)((CYASSTORAGE_MAX_XFER_SIZE*1000)/mDelta) ) ;
if ( memcmp(expdata, actdata, 2048) != 0 )
{
int errCnt = 0 ;
cy_as_hal_print_message(KERN_ERR "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n") ;
for ( i = 0 ; i < 2048 ; i++ )
{
if ( expdata[i] != actdata[i] )
{
cy_as_hal_print_message(KERN_ERR "EXP[%d]: 0x%02x\n",i, expdata[i]);
cy_as_hal_print_message(KERN_ERR "ACT[%d]: 0x%02x\n",i, actdata[i]);
errCnt++ ;
if ( errCnt > 10 )
{
break;
}
}
}
cy_as_hal_print_message(KERN_ERR "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n") ;
retVal = CY_AS_ERROR_INVALID_RESPONSE;
break;
}
else
{
cy_as_hal_print_message(KERN_ERR "success : storage test\n") ;
}
}
break;
case CY_AS_DIAG_SD_WRITE:
{
int i;
int bus = 1 ;
struct timespec mStartTime, mEndTime;
long second,nano;
long mDelta;
for ( i = 0 ; i < CYASSTORAGE_MAX_XFER_SIZE ; i++ )
{
expdata[i] = i;
}
mStartTime = CURRENT_TIME;
retVal = cy_as_storage_write(cyas_hd, bus, 0, 0, start_unit, expdata, MAX_DRQ_LOOPS_IN_ISR) ;
if (retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR "ERROR: cannot write to block device - code %d\n", retVal) ;
break;
}
mEndTime = CURRENT_TIME;
second = mEndTime.tv_sec - mStartTime.tv_sec;
nano = mEndTime.tv_nsec - mStartTime.tv_nsec;
mDelta = (second*1000000) + nano/1000;
cy_as_hal_print_message("<1>%s: writing speed = %d KByte/s\n", __func__, (int)((CYASSTORAGE_MAX_XFER_SIZE*1000)/mDelta) ) ;
}
break;
case CY_AS_DIAG_SD_UNMOUNT:
cy_as_hal_set_ep_dma_mode(4, true);
cy_as_hal_set_ep_dma_mode(8, true);
// Start the storage API and get a handle to the device we are interested in.
retVal = cy_as_storage_stop(cyas_hd,0,0) ;
if (retVal != CY_AS_ERROR_SUCCESS)
{
cy_as_hal_print_message(KERN_ERR"ERROR: Cannot stop storage stack - Reason code %d\n", retVal) ;
return retVal;
}
cy_as_hal_free(actdata);
cy_as_hal_free(expdata);
cyasdevice_enter_standby();
break;
#if 0
case CY_AS_DIAG_CONNECT_UMS:
cyasdevice_leave_standby();
//cyasblkdev_blk_exit();
cyasdevice_reload_firmware(0);
//CyAsHalSelUSBSwitch(1);
retVal = CyAsAPIUsbInit();
if (retVal)
{
cy_as_hal_print_message("%s: USB test failed.\n", __func__) ;
return 0;
}
else
{
msleep(1000);
cy_as_hal_print_message("%s: USB connected.\n", __func__) ;
}
cy_as_hal_print_message("%s: UMS MODE init done\n", __func__) ;
break;
case CY_AS_DIAG_DISCONNECT_UMS:
CyAsAPIUsbExit();
//CyAsHalSelUSBSwitch(0);
cy_as_hal_print_message("%s: UMS mode - close done\n", __func__) ;
cyasdevice_reload_firmware(1);
//cyasblkdev_blk_init(0, 0);
cyasdevice_enter_standby();
cy_as_hal_print_message("%s: reload F/W - close done\n", __func__) ;
break;
case CY_AS_DIAG_CONNECT_MTP:
cyasdevice_leave_standby();
//CyAsHalSelUSBSwitch(1);
cyasblkdev_blk_init(0, 0);
retVal = cy_as_gadget_init(1);
if (retVal)
{
cy_as_hal_print_message("%s: cy_as_gadget_init failed.\n", __func__) ;
}
else
{
cy_as_hal_print_message("%s: cy_as_gadget_init success\n", __func__) ;
}
cy_as_hal_print_message("%s: Start cy_as_gadget driver - init done\n", __func__) ;
break;
case CY_AS_DIAG_DISCONNECT_MTP:
cyasblkdev_blk_exit();
cy_as_gadget_cleanup();
//CyAsHalSelUSBSwitch(0);
cyasdevice_enter_standby();
cy_as_hal_print_message("%s: cy_as_gadget driver - close done\n", __func__) ;
break;
#endif
case CY_AS_DIAG_TEST_RESET_LOW:
//cy_as_hal_set_reset_pin(0);
cy_as_hal_print_message("%s: cy_as_hal_set_reset_pin - set LOW\n", __func__) ;
break;
case CY_AS_DIAG_TEST_RESET_HIGH:
//cy_as_hal_set_reset_pin(1);
cy_as_hal_print_message("%s: cy_as_hal_set_reset_pin - set HIGH\n", __func__) ;
break;
default:
cy_as_hal_print_message("%s: unkown mode \n", __func__) ;
break;
}
#endif
return retVal;
}
