void init_scheduler(void)
{
int rtc_ticks_per_sec;
/* get handle to the system realtime clock */
rtclock = cyg_real_time_clock ();
rtc_resolution = cyg_clock_get_resolution ( rtclock );
rtc_ticks_per_sec = rtc_resolution.divisor;
cyg_clock_to_counter ( rtclock, &rtc_counter );
// Real time clock frequency must be changed in eCos configuration, as there is another
// macro that depends on its value.
//fprintf ( stderr, "cyg_realtime_clock() resolution: dividend=%d, \t divisor=%d\n", rtc_resolution.dividend, rtc_resolution.divisor );
// Create alarms
cyg_alarm_create ( rtc_counter, alarm_handlerfn_daq,0,&alarm_hdl[0],&alarm_obj[0] );
cyg_alarm_create ( rtc_counter, alarm_handlerfn_actuators,0,&alarm_hdl[1],&alarm_obj[1] );
cyg_alarm_create ( rtc_counter, alarm_handlerfn_thread1,0,&alarm_hdl[2],&alarm_obj[2] );
// Initialize conditional variables
pthread_cond_init (&trigger_daq, NULL);
pthread_cond_init (&trigger_actuators, NULL);
pthread_cond_init (&trigger_thread1, NULL);
// Start alarms
// DAQ, executes at t0 + 0.0000
cyg_alarm_initialize ( alarm_hdl[0], DAQ_OFFSET*rtc_ticks_per_sec, rtc_ticks_per_sec/BASE_HZ );
// ACTUATORS, executes at t0 + 0.014
cyg_alarm_initialize ( alarm_hdl[1], ACTUATORS_OFFSET*rtc_ticks_per_sec, rtc_ticks_per_sec/BASE_HZ);
// Thread1, executes at t0 + 0.0130
cyg_alarm_initialize ( alarm_hdl[2], THREAD1_OFFSET*rtc_ticks_per_sec, rtc_ticks_per_sec/THREAD1_HZ );
}
void alarmfn2(cyg_handle_t alarmh, cyg_addrword_t data)
{
db_printf("%s: %d\n",__PRETTY_FUNCTION__,cyg_counter_current_value( counter ));
alarmfn_called[2]++;
// Reschedule alarm[0] to run every 2 ticks until alarm[1] next runs.
cyg_alarm_initialize( alarm[0], cyg_counter_current_value( counter )+1, 2 );
// Reschedule alarm[1] to run every 3 ticks starting in 6 ticks time.
cyg_alarm_initialize( alarm[1], cyg_counter_current_value( counter )+6, 3 );
}
void fptest_main( void )
{
CYG_TEST_INIT();
if( cyg_test_is_simulator )
{
run_ticks = RUN_TICKS_SIM;
}
CYG_TEST_INFO("Run fptest in cyg_start");
do_test( fpt3_values, FP3_COUNT, 1000, 0, "start" );
CYG_TEST_INFO( "cyg_start run done");
cyg_thread_create( BASE_PRI-1,
fptest1,
0,
"fptest1",
&stacks[0][0],
STACK_SIZE,
&thread[0],
&thread_struct[0]);
cyg_thread_resume( thread[0] );
cyg_thread_create( BASE_PRI,
fptest2,
1,
"fptest2",
&stacks[1][0],
STACK_SIZE,
&thread[1],
&thread_struct[1]);
cyg_thread_resume( thread[1] );
cyg_thread_create( BASE_PRI,
fptest3,
2,
"fptest3",
&stacks[2][0],
STACK_SIZE,
&thread[2],
&thread_struct[2]);
cyg_thread_resume( thread[2] );
cyg_alarm_create( cyg_real_time_clock(),
alarm_fn,
0,
&alarm,
&alarm_struct );
cyg_alarm_initialize( alarm, cyg_current_time()+1, 1 );
cyg_scheduler_start();
}
void alarmfn1(cyg_handle_t alarmh, cyg_addrword_t data)
{
db_printf("%s: %d\n",__PRETTY_FUNCTION__,cyg_counter_current_value( counter ));
alarmfn_called[1]++;
// Reschedule alarm[0] to run every tick until alarm[2] next runs.
cyg_alarm_initialize( alarm[0], cyg_counter_current_value( counter )+1, 1 );
}
static void sco_sock_set_timer(struct sock *sk, long timeout)
{
BT_DBG("sock %p state %d timeout %ld", sk, sk->state, timeout);
// if (!mod_timer(&sk->timer, jiffies + timeout))
// sock_hold(sk);
cyg_alarm_disable(sk->timeout_alarm_handle);
cyg_alarm_initialize(sk->timeout_alarm_handle, cyg_current_time()+timeout, 0);
cyg_alarm_enable(sk->timeout_alarm_handle);
sock_hold(sk);
}
// ------------------------------------------------------------------------
// CALLBACK FUNCTION
// Called from the thread, this runs the alarm callbacks.
// Locking is already in place when this is called.
static void
do_timeout(void)
{
int i;
cyg_int32 min_delta;
timeout_entry *e;
CYG_ASSERT( 0 < last_delta, "last_delta underflow" );
min_delta = last_delta; // local copy
last_delta = -1; // flag recursive call underway
for (e = timeouts, i = 0; i < NTIMEOUTS; i++, e++) {
if (e->delta) {
CYG_ASSERT( e->delta >= min_delta, "e->delta underflow" );
e->delta -= min_delta;
if (e->delta <= 0) { // Defensive
// Time for this item to 'fire'
timeout_fun *fun = e->fun;
void *arg = e->arg;
// Call it *after* cleansing the record
e->fun = 0;
e->delta = 0;
(*fun)(arg);
}
}
}
// Now scan for a new timeout *after* running all the callbacks
// (because they can add timeouts themselves)
min_delta = 0x7FFFFFFF; // Maxint
for (e = timeouts, i = 0; i < NTIMEOUTS; i++, e++)
if (e->delta)
if (e->delta < min_delta)
min_delta = e->delta;
CYG_ASSERT( 0 < min_delta, "min_delta underflow" );
if (min_delta != 0x7FFFFFFF) {
// Still something to do, schedule it
last_set_time = cyg_current_time();
cyg_alarm_initialize(timeout_alarm_handle, last_set_time+min_delta, 0);
last_delta = min_delta;
} else {
last_delta = 0; // flag no activity
}
}
void alarm0_main(void)
{
int i;
CYG_TEST_INIT();
// Create the counter
cyg_counter_create( &counter, &counter_obj );
// Create the alarms
cyg_alarm_create( counter,
alarmfn0,
0,
&alarm[0],
&alarm_obj[0]);
cyg_alarm_create( counter,
alarmfn1,
1,
&alarm[1],
&alarm_obj[1]);
cyg_alarm_create( counter,
alarmfn2,
2,
&alarm[2],
&alarm_obj[2]);
// Kick it all off by starting alarm[2]
cyg_alarm_initialize( alarm[2], 0, 10 );
// Run the whole thing for 10000 ticks
for( i = 0; i < 10000; i++ )
cyg_counter_tick( counter );
db_printf("alarmfn_called: %d %d %d\n",
alarmfn_called[0],alarmfn_called[1],alarmfn_called[2]);
CYG_TEST_CHECK( alarmfn_called[0]==5000, "alarmfn0 not called 5000 times\n");
CYG_TEST_CHECK( alarmfn_called[1]==2000, "alarmfn1 not called 2000 times\n");
CYG_TEST_CHECK( alarmfn_called[2]==1001, "alarmfn2 not called 1001 times\n");
CYG_TEST_PASS_FINISH("KAlarm0");
}
void tcp_hole()
{
int interval = 30000;
TCP_HOLE_FLAG = 1;
/* Attach the timer to the CloseTcpHole clock */
CloseTcpHole_SysClk = cyg_real_time_clock();
cyg_clock_to_counter(CloseTcpHole_SysClk, &CloseTcpHole_Counter);
cyg_alarm_create(CloseTcpHole_Counter, (cyg_alarm_t *)CloseTcpHole,
0,
&CloseTcpHole_Alarm, &CloseTcpHole_timerAlarm);
/* This creates a periodic timer */
cyg_alarm_initialize(CloseTcpHole_Alarm, cyg_current_time() + interval, 0); //only trigger once after 5 minutes
}
void linklocal_alarm(void){
/* 10 sec, Follow Link Local IP Stard. If we got ip conflict twice
within 10 seconds, we have to change our link local ip.
<<<Ron 12/13/04 >>> */
int interval = 10; //10 sec
/* Attach the timer to the real-time clock */
hSysClk = cyg_real_time_clock();
cyg_clock_to_counter(hSysClk, &hCounter);
// cyg_alarm_create(hCounter, (cyg_alarm_t *)linklocal_msg_post,
cyg_alarm_create(hCounter, (cyg_alarm_t *)linklocal_msg_timer,
(cyg_addrword_t) &alarmData,
&hAlarm, &timerAlarm);
/* This creates a periodic timer */
cyg_alarm_initialize(hAlarm, cyg_current_time() + interval, 10);
}
void CECOSTimerHandler::enableHandler(void){
cyg_alarm_initialize(m_stAlarmHandle, cyg_current_time() + 1, 1);
}
// ------------------------------------------------------------------------
// EXPORTED API: SET A TIMEOUT
// This can be called from anywhere, including recursively from the timeout
// functions themselves.
cyg_uint32
timeout(timeout_fun *fun, void *arg, cyg_int32 delta)
{
int i;
timeout_entry *e;
cyg_uint32 stamp;
// this needs to be atomic - recursive calls from the alarm
// handler thread itself are allowed:
int spl = cyg_splinternal();
CYG_ASSERT( 0 < delta, "delta is right now, or even sooner!" );
// Renormalize delta wrt the existing set alarm, if there is one
if ( last_delta > 0 )
delta += (cyg_int32)(cyg_current_time() - last_set_time);
// So recorded_delta is set to either:
// alarm is active: delta + NOW - THEN
// alarm is inactive: delta
stamp = 0; // Assume no slots available
for (e = timeouts, i = 0; i < NTIMEOUTS; i++, e++) {
if ((e->delta == 0) && (e->fun == 0)) {
// Free entry
e->delta = delta;
e->fun = fun;
e->arg = arg;
stamp = (cyg_uint32)e;
break;
}
}
if ( stamp && // we did add a record AND
(0 == last_delta || // alarm was inactive OR
delta < last_delta) ) { // alarm was active but later than we need
// (if last_delta is -1, this call is recursive from the handler so
// also do nothing in that case)
// Here, we know the new item added is sooner than that which was
// most recently set, if any, so we can just go and set it up.
if ( 0 == last_delta )
last_set_time = cyg_current_time();
// So we use, to set the alarm either:
// alarm is active: (delta + NOW - THEN) + THEN
// alarm is inactive: delta + NOW
// and in either case it is true that
// (recorded_delta + last_set_time) == (delta + NOW)
cyg_alarm_initialize(timeout_alarm_handle, last_set_time+delta, 0);
last_delta = delta;
}
// Otherwise, the alarm is active, AND it is set to fire sooner than we
// require, so when it does, that will sort out calling the item we
// just added. Or we didn't actually add a record, so nothing has
// changed.
#ifdef CYGPKG_INFRA_DEBUG
// Do some more checking akin to that in the alarm handler:
if ( last_delta != -1 ) { // not a recursive call
cyg_tick_count_t now = cyg_current_time();
CYG_ASSERT( last_delta >= 0, "Bad last delta" );
delta = 0x7fffffff;
for (e = timeouts, i = 0; i < NTIMEOUTS; i++, e++) {
if (e->delta) {
CYG_ASSERT( e->delta >= last_delta, "e->delta underflow" );
CYG_ASSERT( last_set_time + e->delta + 1000 > now,
"Recorded alarm not in the future!" );
if ( e->delta < delta )
delta = e->delta;
} else {
CYG_ASSERT( 0 == e->fun, "Function recorded for 0 delta" );
}
}
CYG_ASSERT( delta == last_delta, "We didn't pick the smallest delta!" );
}
#endif
cyg_splx(spl);
return stamp;
}
// ------------------------------------------------------------------------
// CALLBACK FUNCTION
// Called from the thread, this runs the alarm callbacks.
// Locking is already in place when this is called.
static void
do_timeout(void)
{
cyg_int32 min_delta;
timeout_entry *e, *e_next;
CYG_ASSERT( 0 < last_delta, "last_delta underflow" );
min_delta = last_delta; // local copy
last_delta = -1; // flag recursive call underway
e = timeouts;
while (e) {
e_next = e->next; // Because this can change during processing
if (e->delta) {
#ifdef TIMEOUT_DEBUG
if ( !(e->delta >= min_delta)) {
diag_printf("Bad delta in timeout: %p, delta: %d, min: %d, last: %ld\n", e, e->delta, min_delta, last_set_time);
_show_timeouts();
}
#endif
// Note: this _can_ happen if timeouts are scheduled before the clock starts!
// CYG_ASSERT( e->delta >= min_delta, "e->delta underflow" );
e->delta -= min_delta;
if (e->delta <= 0) { // Defensive
// Time for this item to 'fire'
timeout_fun *fun = e->fun;
void *arg = e->arg;
// Call it *after* cleansing the record
// diag_printf("%s(%p, %p, %p)\n", __FUNCTION__, e, e->fun, e->arg);
e->flags &= ~CALLOUT_PENDING;
e->delta = 0;
if (e->next) {
e->next->prev = e->prev;
}
if (e->prev) {
e->prev->next = e->next;
} else {
timeouts = e->next;
}
(*fun)(arg);
}
}
e = e_next;
}
// Now scan for a new timeout *after* running all the callbacks
// (because they can add timeouts themselves)
min_delta = 0x7FFFFFFF; // Maxint
for (e = timeouts; e; e = e->next )
if (e->delta)
if (e->delta < min_delta)
min_delta = e->delta;
CYG_ASSERT( 0 < min_delta, "min_delta underflow" );
if (min_delta != 0x7FFFFFFF) {
// Still something to do, schedule it
last_set_time = cyg_current_time();
cyg_alarm_initialize(timeout_alarm_handle, last_set_time+min_delta, 0);
last_delta = min_delta;
} else {
last_delta = 0; // flag no activity
}
#ifdef TIMEOUT_DEBUG
diag_printf("Timeout list after %s\n", __FUNCTION__);
_show_timeouts();
#endif
}
void
callout_reset(struct callout *c, int delta, timeout_fun *f, void *p)
{
int spl = cyg_splinternal();
CYG_ASSERT( 0 < delta, "delta is right now, or even sooner!" );
// Renormalize delta wrt the existing set alarm, if there is one
if (last_delta > 0) {
#ifdef TIMEOUT_DEBUG
int _delta = delta;
int _time = cyg_current_time();
#endif // TIMEOUT_DEBUG
// There is an active alarm
if (last_set_time != 0) {
// Adjust the delta to be absolute, relative to the alarm
delta += (cyg_int32)(cyg_current_time() - last_set_time);
} else {
// We don't know exactly when the alarm will fire, so just
// schedule this event for the first time, or sometime after
; // Leaving the value alone won't be "too wrong"
}
#ifdef TIMEOUT_DEBUG
diag_printf("delta changed from %d to %d, now: %d, then: %d, last_delta: %d\n",
_delta, delta, _time, (int)last_set_time, last_delta);
_show_timeouts();
#endif
}
// So recorded_delta is set to either:
// alarm is active: delta + NOW - THEN
// alarm is inactive: delta
// Add this callout/timeout to the list of things to do
if (c->flags & CALLOUT_PENDING) {
callout_stop(c);
}
c->prev = (timeout_entry *)NULL;
c->next = timeouts;
if (c->next != (timeout_entry *)NULL) {
c->next->prev = c;
}
timeouts = c;
c->flags |= CALLOUT_PENDING | CALLOUT_ACTIVE;
c->fun = f;
c->arg = p;
c->delta = delta;
#ifdef TIMEOUT_DEBUG
diag_printf("%s(%p, %d, %p, %p)\n", __FUNCTION__, c, delta, f, p);
_show_timeouts();
#endif
if ((0 == last_delta || // alarm was inactive OR
delta < last_delta) ) { // alarm was active but later than we need
// (if last_delta is -1, this call is recursive from the handler so
// also do nothing in that case)
// Here, we know the new item added is sooner than that which was
// most recently set, if any, so we can just go and set it up.
if ( 0 == last_delta )
last_set_time = cyg_current_time();
// So we use, to set the alarm either:
// alarm is active: (delta + NOW - THEN) + THEN
// alarm is inactive: delta + NOW
// and in either case it is true that
// (recorded_delta + last_set_time) == (delta + NOW)
cyg_alarm_initialize(timeout_alarm_handle, last_set_time+delta, 0);
#ifdef TIMEOUT_DEBUG
if ((int)last_set_time == 0) {
diag_printf("delta: %d, time: %ld, last_delta: %d\n", delta, last_set_time, last_delta);
}
#endif
last_delta = delta;
}
// Otherwise, the alarm is active, AND it is set to fire sooner than we
// require, so when it does, that will sort out calling the item we
// just added.
#ifdef CYGPKG_INFRA_DEBUG
// Do some more checking akin to that in the alarm handler:
if ( last_delta != -1 ) { // not a recursive call
cyg_tick_count_t now = cyg_current_time();
timeout_entry *e;
CYG_ASSERT( last_delta >= 0, "Bad last delta" );
delta = 0x7fffffff;
for (e = timeouts; e; e = e->next) {
if (e->delta) {
CYG_ASSERT( e->delta >= last_delta, "e->delta underflow" );
// the following triggers if the "next" timeout has not just
// passed, but passed by 1000 ticks - which with the normal
// 1 tick = 10ms means 10 seconds - a long time.
CYG_ASSERT( last_set_time + e->delta + 1000 > now,
"Recorded alarm not in the future! Starved network thread?" );
if ( e->delta < delta )
delta = e->delta;
} else {
CYG_ASSERT( 0 == e->fun, "Function recorded for 0 delta" );
}
}
if (delta < last_delta) {
diag_printf("Failed to pick smallest delta - picked: %d, last: %d\n", delta, last_delta);
for (e = timeouts; e; e = e->next) {
diag_printf(" timeout: %p at %d\n", e->fun, e->delta);
}
}
CYG_ASSERT( delta >= last_delta, "We didn't pick the smallest delta!" );
}
#endif
cyg_splx(spl);
}
void kclock0_main(void)
{
CYG_TEST_INIT();
CHECK(flash());
CHECK(flash());
cyg_counter_create( &counter0, &counter0o);
CHECK( 0 == cyg_counter_current_value( counter0 ) );
cyg_counter_tick(counter0);
CHECK( 1 == cyg_counter_current_value(counter0) );
cyg_counter_tick(counter0);
CHECK( 2 == cyg_counter_current_value(counter0) );
cyg_counter_set_value( counter0, 0xffffffff );
CHECK( 0xffffffff == cyg_counter_current_value(counter0) );
cyg_counter_tick(counter0); // Overflows 32 bits
CHECK( 0x100000000ULL == cyg_counter_current_value(counter0) );
cyg_counter_set_value(counter0, 11);
CHECK( 11 == cyg_counter_current_value(counter0) );
/* the call_me functions cause the "called" bits to toggle
// checking the value of called checks the parity of # of calls
// made by each alarm.
*/
cyg_alarm_create(counter0,
call_me, (cyg_addrword_t)0x1, &alarm0, &alarmo[0]);
cyg_alarm_create(counter0,
call_me, (cyg_addrword_t)0x2, &alarm1, &alarmo[1]);
cyg_alarm_create(counter0,
call_me2, (cyg_addrword_t)0x4, &alarm2, &alarmo[2]);
CHECK( 0x00 == called );
cyg_alarm_initialize(alarm0, 12,3);
cyg_alarm_initialize(alarm2, 21,2);
CHECK( 0x00 == called );
cyg_counter_tick(counter0); /* 12 a0 */
CHECK( 0x01 == called );
cyg_alarm_initialize(alarm1, 13,0);
cyg_counter_tick(counter0); /* 13 a1 */
CHECK( 0x03 == called );
cyg_alarm_initialize(alarm1, 17,0);
cyg_counter_tick(counter0); /* 14 */
CHECK( 0x03 == called );
cyg_counter_tick(counter0); /* 15 a0 */
CHECK( 0x02 == called );
cyg_counter_tick(counter0); /* 16 */
cyg_counter_tick(counter0); /* 17 a1 */
CHECK( 0x00 == called );
cyg_counter_tick(counter0); /* 18 a0 */
CHECK( 0x01 == called );
cyg_counter_tick(counter0); /* 19 */
cyg_counter_tick(counter0); /* 20 */
cyg_counter_tick(counter0); /* 21 a0 a2 */
CHECK( 0x14 == called );
cyg_counter_tick(counter0); /* 22 */
cyg_counter_tick(counter0); /* 23 a2 */
CHECK( 0x00 == called );
cyg_alarm_disable(alarm2);
cyg_counter_tick(counter0); /* 24 a0 */
cyg_counter_tick(counter0); /* 25 */
CHECK( 0x01 == called );
cyg_alarm_enable(alarm2); /* a2 (enabled at 25) */
CHECK( 0x15 == called );
cyg_counter_tick(counter0); /* 26 */
CHECK( 0x15 == called );
cyg_counter_tick(counter0); /* 27 a0 a2 */
cyg_counter_tick(counter0); /* 28 */
CHECK( 0x00 == called );
cyg_counter_tick(counter0); /* 29 a2 */
cyg_counter_tick(counter0); /* 30 a0 */
cyg_counter_tick(counter0); /* 31 a2 */
CHECK( 0x01 == called );
res0.dividend = 100;
res0.divisor = 3;
cyg_clock_create( res0, &clock0, &clock0o );
res1 = cyg_clock_get_resolution(clock0);
CHECK( res0.dividend == res1.dividend );
CHECK( res0.divisor == res1.divisor );
res1.dividend = 12;
res1.divisor = 25;
cyg_clock_set_resolution(clock0, res1);
res0 = cyg_clock_get_resolution(clock0);
CHECK( res0.dividend == res1.dividend );
CHECK( res0.divisor == res1.divisor );
cyg_clock_to_counter(clock0, &counter1);
CHECK( 0 == cyg_counter_current_value( counter1 ) );
CHECK( 0 == cyg_current_time() );
cyg_counter_tick(counter1);
CHECK( 1 == cyg_counter_current_value(counter1) );
res0 = cyg_clock_get_resolution(cyg_real_time_clock());
/* Current time should be 0 as interrupts will still be disabled */
CHECK( 0 == cyg_current_time() );
CYG_TEST_PASS_FINISH("Kernel C API Clock 0 OK");
}
void cyg_user_start(void){
// Initialize framebuffer in graphic mode
ezs_fb_init();
// Initialize soundblaster
ezs_sb16_init(&sb16,
0x220 /* io address */,
5 /* interrupt */,
1 /* 8 bit DMA */,
5 /* 16 bit DMA */);
// Initialize HPET counter
ezs_counter_init();
// Initialize Tracer
int res = ezs_trace_init();
printf("init res: %d\r\n" , res);
// Create keyboard interrupt, attach to handler table and umask
cyg_interrupt_create(CYGNUM_HAL_INTERRUPT_KEYBOARD, 1, (cyg_addrword_t) &keyhandle, keyb_isr_handler, keyb_dsr_handler, &handle, &intr) ;
cyg_interrupt_attach(handle);
cyg_interrupt_unmask(CYGNUM_HAL_INTERRUPT_KEYBOARD);
// Create test thread
cyg_thread_create(17, &thread, 0, "Abtastung1", my_stack, STACKSIZE,
&threadhndl1, &threaddata);
// Create keyboard thread
cyg_thread_create(1, &keythread, 0, "Keyboard", keystack, STACKSIZE,
&keyhandle, &keydata);
// Create other threads
cyg_thread_create(1, abtastung1, 0, "thread_abtastung1", my_stack_abt1, STACKSIZE,
&(threadhndl_abt1), &(threaddata_abt1));
cyg_thread_create(5, abtastung2, 0, "thread_abtastung2", my_stack_abt2, STACKSIZE,
&(threadhndl_abt2), &(threaddata_abt2));
cyg_thread_create(10, analyse, 0, "thread_analyse", my_stack_anal, STACKSIZE,
&(threadhndl_anal), &(threaddata_anal));
cyg_thread_create(15, darstellung, 0, "thread_darstellung", my_stack_darst, STACKSIZE,
&(threadhndl_darst), &(threaddata_darst));
cyg_handle_t counter;
cyg_clock_to_counter(cyg_real_time_clock(), &counter);
/*
cyg_alarm_create(counter, alarm_handler, (cyg_addrword_t) &threadhndl1 , &alarmhnd1, &alarm1);
cyg_alarm_initialize(alarmhnd1, 0, 10);
cyg_alarm_enable(alarmhnd1);
*/
cyg_alarm_create(counter, alarm_handler, (cyg_addrword_t) &threadhndl_abt1 , &alarmhnd_abt1, &alarm_abt1);
cyg_alarm_initialize(alarmhnd_abt1, cyg_counter_current_value(counter) + 10, 10);
cyg_alarm_create(counter, alarm_handler, (cyg_addrword_t) &threadhndl_abt2 , &alarmhnd_abt2, &alarm_abt2);
cyg_alarm_initialize(alarmhnd_abt2, cyg_counter_current_value(counter) + 12, 20);
cyg_alarm_create(counter, alarm_handler, (cyg_addrword_t) &threadhndl_anal , &alarmhnd_anal, &alarm_anal);
cyg_alarm_initialize(alarmhnd_anal, cyg_counter_current_value(counter) + 14, 20);
cyg_alarm_create(counter, alarm_handler, (cyg_addrword_t) &threadhndl_darst , &alarmhnd_darst, &alarm_darst);
cyg_alarm_initialize(alarmhnd_darst, cyg_counter_current_value(counter) + 22, 100);
}
