Beispiel #1
0
void dashboardShowFixedPage(pageId_e pageId)
{
    dashboardSetPage(pageId);
    dashboardDisablePageCycling();
}
Beispiel #2
0
void processRcStickPositions(throttleStatus_e throttleStatus)
{
    static uint8_t rcDelayCommand;      // this indicates the number of time (multiple of RC measurement at 50Hz) the sticks must be maintained to run or switch off motors
    static uint8_t rcSticks;            // this hold sticks position for command combos
    static uint8_t rcDisarmTicks;       // this is an extra guard for disarming through switch to prevent that one frame can disarm it
    uint8_t stTmp = 0;
    int i;

    // ------------------ STICKS COMMAND HANDLER --------------------
    // checking sticks positions
    for (i = 0; i < 4; i++) {
        stTmp >>= 2;
        if (rcData[i] > rxConfig()->mincheck)
            stTmp |= 0x80;  // check for MIN
        if (rcData[i] < rxConfig()->maxcheck)
            stTmp |= 0x40;  // check for MAX
    }
    if (stTmp == rcSticks) {
        if (rcDelayCommand < 250)
            rcDelayCommand++;
    } else
        rcDelayCommand = 0;
    rcSticks = stTmp;

    // perform actions
    if (!isUsingSticksToArm) {

        if (IS_RC_MODE_ACTIVE(BOXARM)) {
            rcDisarmTicks = 0;
            // Arming via ARM BOX
            tryArm();
        } else {
            // Disarming via ARM BOX
            resetArmingDisabled();

            if (ARMING_FLAG(ARMED) && rxIsReceivingSignal() && !failsafeIsActive()  ) {
                rcDisarmTicks++;
                if (rcDisarmTicks > 3) {
                    if (armingConfig()->disarm_kill_switch) {
                        disarm();
                    } else if (throttleStatus == THROTTLE_LOW) {
                        disarm();
                    }
                }
            }
        }
    }

    if (rcDelayCommand != 20) {
        return;
    }

    if (isUsingSticksToArm) {
        // Disarm on throttle down + yaw
        if (rcSticks == THR_LO + YAW_LO + PIT_CE + ROL_CE) {
            if (ARMING_FLAG(ARMED))
                disarm();
            else {
                beeper(BEEPER_DISARM_REPEAT);    // sound tone while stick held
                rcDelayCommand = 0;              // reset so disarm tone will repeat
            }
        }
    }

    if (ARMING_FLAG(ARMED)) {
        // actions during armed
        return;
    }

    // actions during not armed
    i = 0;

    if (rcSticks == THR_LO + YAW_LO + PIT_LO + ROL_CE) {
        // GYRO calibration
        gyroStartCalibration(false);

#ifdef GPS
        if (feature(FEATURE_GPS)) {
            GPS_reset_home_position();
        }
#endif

#ifdef BARO
        if (sensors(SENSOR_BARO))
            baroSetCalibrationCycles(10); // calibrate baro to new ground level (10 * 25 ms = ~250 ms non blocking)
#endif

        return;
    }

    if (feature(FEATURE_INFLIGHT_ACC_CAL) && (rcSticks == THR_LO + YAW_LO + PIT_HI + ROL_HI)) {
        // Inflight ACC Calibration
        handleInflightCalibrationStickPosition();
        return;
    }

    // Multiple configuration profiles
    if (rcSticks == THR_LO + YAW_LO + PIT_CE + ROL_LO)          // ROLL left  -> Profile 1
        i = 1;
    else if (rcSticks == THR_LO + YAW_LO + PIT_HI + ROL_CE)     // PITCH up   -> Profile 2
        i = 2;
    else if (rcSticks == THR_LO + YAW_LO + PIT_CE + ROL_HI)     // ROLL right -> Profile 3
        i = 3;
    if (i) {
        changePidProfile(i - 1);
        return;
    }

    if (rcSticks == THR_LO + YAW_LO + PIT_LO + ROL_HI) {
        saveConfigAndNotify();
    }

    if (isUsingSticksToArm) {

        if (rcSticks == THR_LO + YAW_HI + PIT_CE + ROL_CE) {
            // Arm via YAW
            tryArm();

            return;
        } else {
            resetArmingDisabled();
        }
    }

    if (rcSticks == THR_HI + YAW_LO + PIT_LO + ROL_CE) {
        // Calibrating Acc
        accSetCalibrationCycles(CALIBRATING_ACC_CYCLES);
        return;
    }


    if (rcSticks == THR_HI + YAW_HI + PIT_LO + ROL_CE) {
        // Calibrating Mag
        ENABLE_STATE(CALIBRATE_MAG);
        return;
    }


    // Accelerometer Trim

    rollAndPitchTrims_t accelerometerTrimsDelta;
    memset(&accelerometerTrimsDelta, 0, sizeof(accelerometerTrimsDelta));

    bool shouldApplyRollAndPitchTrimDelta = false;
    if (rcSticks == THR_HI + YAW_CE + PIT_HI + ROL_CE) {
        accelerometerTrimsDelta.values.pitch = 2;
        shouldApplyRollAndPitchTrimDelta = true;
    } else if (rcSticks == THR_HI + YAW_CE + PIT_LO + ROL_CE) {
        accelerometerTrimsDelta.values.pitch = -2;
        shouldApplyRollAndPitchTrimDelta = true;
    } else if (rcSticks == THR_HI + YAW_CE + PIT_CE + ROL_HI) {
        accelerometerTrimsDelta.values.roll = 2;
        shouldApplyRollAndPitchTrimDelta = true;
    } else if (rcSticks == THR_HI + YAW_CE + PIT_CE + ROL_LO) {
        accelerometerTrimsDelta.values.roll = -2;
        shouldApplyRollAndPitchTrimDelta = true;
    }
    if (shouldApplyRollAndPitchTrimDelta) {
        applyAndSaveAccelerometerTrimsDelta(&accelerometerTrimsDelta);
        rcDelayCommand = 0; // allow autorepetition
        return;
    }

#ifdef USE_DASHBOARD
    if (rcSticks == THR_LO + YAW_CE + PIT_HI + ROL_LO) {
        dashboardDisablePageCycling();
    }

    if (rcSticks == THR_LO + YAW_CE + PIT_HI + ROL_HI) {
        dashboardEnablePageCycling();
    }
#endif

#ifdef VTX_CONTROL
    if (rcSticks ==  THR_HI + YAW_LO + PIT_CE + ROL_HI) {
        vtxIncrementBand();
    }
    if (rcSticks ==  THR_HI + YAW_LO + PIT_CE + ROL_LO) {
        vtxDecrementBand();
    }
    if (rcSticks ==  THR_HI + YAW_HI + PIT_CE + ROL_HI) {
        vtxIncrementChannel();
    }
    if (rcSticks ==  THR_HI + YAW_HI + PIT_CE + ROL_LO) {
        vtxDecrementChannel();
    }
#endif

}
Beispiel #3
0
void processRcStickPositions(throttleStatus_e throttleStatus)
{
    // time the sticks are maintained
    static int16_t rcDelayMs;
    // hold sticks position for command combos
    static uint8_t rcSticks;
    // an extra guard for disarming through switch to prevent that one frame can disarm it
    static uint8_t rcDisarmTicks;
    static bool doNotRepeat;

#ifdef USE_CMS
    if (cmsInMenu) {
        return;
    }
#endif

    // checking sticks positions
    uint8_t stTmp = 0;
    for (int i = 0; i < 4; i++) {
        stTmp >>= 2;
        if (rcData[i] > rxConfig()->mincheck) {
            stTmp |= 0x80;  // check for MIN
        }
        if (rcData[i] < rxConfig()->maxcheck) {
            stTmp |= 0x40;  // check for MAX
        }
    }
    if (stTmp == rcSticks) {
        if (rcDelayMs <= INT16_MAX - (getTaskDeltaTime(TASK_SELF) / 1000)) {
            rcDelayMs += getTaskDeltaTime(TASK_SELF) / 1000;
        }
    } else {
        rcDelayMs = 0;
        doNotRepeat = false;
    }
    rcSticks = stTmp;

    // perform actions
    if (!isUsingSticksToArm) {
        if (IS_RC_MODE_ACTIVE(BOXARM)) {
            rcDisarmTicks = 0;
            // Arming via ARM BOX
            tryArm();
        } else {
            // Disarming via ARM BOX
            resetArmingDisabled();
            if (ARMING_FLAG(ARMED) && rxIsReceivingSignal() && !failsafeIsActive()  ) {
                rcDisarmTicks++;
                if (rcDisarmTicks > 3) {
                    if (armingConfig()->disarm_kill_switch) {
                        disarm();
                    } else if (throttleStatus == THROTTLE_LOW) {
                        disarm();
                    }
                }
            }
        }
    } else if (rcSticks == THR_LO + YAW_LO + PIT_CE + ROL_CE) {
        if (rcDelayMs >= ARM_DELAY_MS && !doNotRepeat) {
            doNotRepeat = true;
            // Disarm on throttle down + yaw
            if (ARMING_FLAG(ARMED))
                disarm();
            else {
                beeper(BEEPER_DISARM_REPEAT);     // sound tone while stick held
                repeatAfter(STICK_AUTOREPEAT_MS); // disarm tone will repeat
            }
        }
        return;
    } else if (rcSticks == THR_LO + YAW_HI + PIT_CE + ROL_CE) {
        if (rcDelayMs >= ARM_DELAY_MS && !doNotRepeat) {
            doNotRepeat = true;
            if (!ARMING_FLAG(ARMED)) {
                // Arm via YAW
                tryArm();
            } else {
                resetArmingDisabled();
            }
        }
        return;
    }

    if (ARMING_FLAG(ARMED) || doNotRepeat || rcDelayMs <= STICK_DELAY_MS) {
        return;
    }
    doNotRepeat = true;

    // actions during not armed

    if (rcSticks == THR_LO + YAW_LO + PIT_LO + ROL_CE) {
        // GYRO calibration
        gyroStartCalibration(false);

#ifdef USE_GPS
        if (feature(FEATURE_GPS)) {
            GPS_reset_home_position();
        }
#endif

#ifdef USE_BARO
        if (sensors(SENSOR_BARO))
            baroSetCalibrationCycles(10); // calibrate baro to new ground level (10 * 25 ms = ~250 ms non blocking)
#endif

        return;
    }

    if (feature(FEATURE_INFLIGHT_ACC_CAL) && (rcSticks == THR_LO + YAW_LO + PIT_HI + ROL_HI)) {
        // Inflight ACC Calibration
        handleInflightCalibrationStickPosition();
        return;
    }

    // Change PID profile
    int newPidProfile = 0;
    if (rcSticks == THR_LO + YAW_LO + PIT_CE + ROL_LO) {        // ROLL left  -> PID profile 1
        newPidProfile = 1;
    } else if (rcSticks == THR_LO + YAW_LO + PIT_HI + ROL_CE) { // PITCH up   -> PID profile 2
        newPidProfile = 2;
    } else if (rcSticks == THR_LO + YAW_LO + PIT_CE + ROL_HI) { // ROLL right -> PID profile 3
        newPidProfile = 3;
    }
    if (newPidProfile) {
        changePidProfile(newPidProfile - 1);
        return;
    }

    if (rcSticks == THR_LO + YAW_LO + PIT_LO + ROL_HI) {
        saveConfigAndNotify();
    }

    if (rcSticks == THR_HI + YAW_LO + PIT_LO + ROL_CE) {
        // Calibrating Acc
        accSetCalibrationCycles(CALIBRATING_ACC_CYCLES);
        return;
    }


    if (rcSticks == THR_HI + YAW_HI + PIT_LO + ROL_CE) {
        // Calibrating Mag
        ENABLE_STATE(CALIBRATE_MAG);
        return;
    }


    if (FLIGHT_MODE(ANGLE_MODE|HORIZON_MODE)) {
        // in ANGLE or HORIZON mode, so use sticks to apply accelerometer trims
        rollAndPitchTrims_t accelerometerTrimsDelta;
        memset(&accelerometerTrimsDelta, 0, sizeof(accelerometerTrimsDelta));

        bool shouldApplyRollAndPitchTrimDelta = false;
        if (rcSticks == THR_HI + YAW_CE + PIT_HI + ROL_CE) {
            accelerometerTrimsDelta.values.pitch = 2;
            shouldApplyRollAndPitchTrimDelta = true;
        } else if (rcSticks == THR_HI + YAW_CE + PIT_LO + ROL_CE) {
            accelerometerTrimsDelta.values.pitch = -2;
            shouldApplyRollAndPitchTrimDelta = true;
        } else if (rcSticks == THR_HI + YAW_CE + PIT_CE + ROL_HI) {
            accelerometerTrimsDelta.values.roll = 2;
            shouldApplyRollAndPitchTrimDelta = true;
        } else if (rcSticks == THR_HI + YAW_CE + PIT_CE + ROL_LO) {
            accelerometerTrimsDelta.values.roll = -2;
            shouldApplyRollAndPitchTrimDelta = true;
        }
        if (shouldApplyRollAndPitchTrimDelta) {
            applyAndSaveAccelerometerTrimsDelta(&accelerometerTrimsDelta);
            repeatAfter(STICK_AUTOREPEAT_MS);
            return;
        }
    } else {
        // in ACRO mode, so use sticks to change RATE profile
        switch (rcSticks) {
        case THR_HI + YAW_CE + PIT_HI + ROL_CE:
            changeControlRateProfile(0);
            return;
        case THR_HI + YAW_CE + PIT_LO + ROL_CE:
            changeControlRateProfile(1);
            return;
        case THR_HI + YAW_CE + PIT_CE + ROL_HI:
            changeControlRateProfile(2);
            return;
        case THR_HI + YAW_CE + PIT_CE + ROL_LO:
            changeControlRateProfile(3);
            return;
        }
    }

#ifdef USE_DASHBOARD
    if (rcSticks == THR_LO + YAW_CE + PIT_HI + ROL_LO) {
        dashboardDisablePageCycling();
    }

    if (rcSticks == THR_LO + YAW_CE + PIT_HI + ROL_HI) {
        dashboardEnablePageCycling();
    }
#endif

#ifdef USE_VTX_CONTROL
    if (rcSticks ==  THR_HI + YAW_LO + PIT_CE + ROL_HI) {
        vtxIncrementBand();
    }
    if (rcSticks ==  THR_HI + YAW_LO + PIT_CE + ROL_LO) {
        vtxDecrementBand();
    }
    if (rcSticks ==  THR_HI + YAW_HI + PIT_CE + ROL_HI) {
        vtxIncrementChannel();
    }
    if (rcSticks ==  THR_HI + YAW_HI + PIT_CE + ROL_LO) {
        vtxDecrementChannel();
    }
#endif

#ifdef USE_CAMERA_CONTROL
    if (rcSticks == THR_CE + YAW_HI + PIT_CE + ROL_CE) {
        cameraControlKeyPress(CAMERA_CONTROL_KEY_ENTER, 0);
        repeatAfter(3 * STICK_DELAY_MS);
    } else if (rcSticks == THR_CE + YAW_CE + PIT_CE + ROL_LO) {
        cameraControlKeyPress(CAMERA_CONTROL_KEY_LEFT, 0);
        repeatAfter(3 * STICK_DELAY_MS);
    } else if (rcSticks == THR_CE + YAW_CE + PIT_HI + ROL_CE) {
        cameraControlKeyPress(CAMERA_CONTROL_KEY_UP, 0);
        repeatAfter(3 * STICK_DELAY_MS);
    } else if (rcSticks == THR_CE + YAW_CE + PIT_CE + ROL_HI) {
        cameraControlKeyPress(CAMERA_CONTROL_KEY_RIGHT, 0);
        repeatAfter(3 * STICK_DELAY_MS);
    } else if (rcSticks == THR_CE + YAW_CE + PIT_LO + ROL_CE) {
        cameraControlKeyPress(CAMERA_CONTROL_KEY_DOWN, 0);
        repeatAfter(3 * STICK_DELAY_MS);
    } else if (rcSticks == THR_LO + YAW_CE + PIT_HI + ROL_CE) {
        cameraControlKeyPress(CAMERA_CONTROL_KEY_UP, 2000);
    }
#endif
}