int main(void)
{
for (u32 i = 0; i < 600000; i++)
__asm__("nop");
led_setup();
rcc_clock_setup_hse_3v3(&hse_16_368MHz_in_65_472MHz_out_3v3);
debug_setup();
printf("\n\nFirmware info - git: " GIT_VERSION ", built: " __DATE__ " " __TIME__ "\n");
printf("--- DEBUG TEST ---\n");
debug_register_callback(0x22, &foo_callback, &foo_callback_node);
debug_register_callback(0x42, &led_callback, &led_callback_node);
while(1)
{
debug_process_messages();
for (u32 i = 0; i < 600000; i++)
__asm__("nop");
}
while (1);
return 0;
}
void m25_setup(void) {
// Assumes spi_setup already called
static msg_callbacks_node_t flash_write_node, flash_read_node, flash_erase_node;
debug_register_callback(MSG_FLASH_WRITE, &flash_write_callback, &flash_write_node);
debug_register_callback(MSG_FLASH_READ, &flash_read_callback, &flash_read_node);
debug_register_callback(MSG_FLASH_ERASE, &flash_erase_callback, &flash_erase_node);
/*
u32 m25_id = m25_read_id();
printf("SPI flash capacity = %02X, type = %02X, manufacturer = %02X\n", (char) (m25_id & 0xFF), (char)((m25_id >> 8) & 0xFF), (char)((m25_id >> 16) & 0xFF));
*/
}
int main(void)
{
for (u32 i = 0; i < 600000; i++)
__asm__("nop");
led_setup();
rcc_clock_setup_hse_3v3(&hse_16_368MHz_in_65_472MHz_out_3v3);
debug_setup();
timer_setup();
// Debug pins (CC1111 TX/RX)
RCC_AHB1ENR |= RCC_AHB1ENR_IOPCEN;
gpio_mode_setup(GPIOC, GPIO_MODE_OUTPUT, GPIO_PUPD_NONE, GPIO10|GPIO11);
gpio_clear(GPIOC, GPIO10|GPIO11);
printf("\n\nFirmware info - git: " GIT_VERSION ", built: " __DATE__ " " __TIME__ "\n");
printf("--- DEBUG RX STRESS TEST ---\n");
static msg_callbacks_node_t callback_node;
debug_register_callback(0x22, &callback, &callback_node);
for (u8 i=0; i<30; i++) {
guard_below[i] = 0;
guard_above[i] = 0;
}
while(1) {
/* Check the guards for buffer over/underrun. */
for (u8 i=0; i<30; i++) {
if (guard_below[i] != 0)
screaming_death();
if (guard_above[i] != 0)
screaming_death();
}
debug_process_messages();
//for (u32 i = 0; i < 1000; i++)
// __asm__("nop");
}
while (1);
return 0;
}
int realmain(int argc, char **argv)
{
wzMain(argc, argv);
debug_init();
debug_register_callback(debug_callback_stderr, NULL, NULL, NULL);
pie_SetVideoBufferWidth(800);
pie_SetVideoBufferHeight(600);
if (!wzMainScreenSetup(0, false, true))
{
fprintf(stderr, "Failed to initialize graphics\n");
return EXIT_FAILURE;
}
frameInitialise();
screenInitialise();
wzMainEventLoop(); // enter main loop
frameShutDown();
screenShutDown();
wzShutdown();
return EXIT_SUCCESS;
}
int realmain(int argc, char *argv[])
{
// The libcrypto startup stuff... May or may not actually be needed for anything at all.
ERR_load_crypto_strings(); // This is needed for descriptive error messages.
OpenSSL_add_all_algorithms(); // Don't actually use the EVP functions, so probably not needed.
OPENSSL_config(nullptr); // What does this actually do?
#ifdef WZ_OS_WIN
RAND_screen(); // Uses a screenshot as a random seed, on systems lacking /dev/random.
#endif
wzMain(argc, argv);
int utfargc = argc;
const char** utfargv = (const char**)argv;
#ifdef WZ_OS_MAC
cocoaInit();
#endif
debug_init();
debug_register_callback( debug_callback_stderr, NULL, NULL, NULL );
#if defined(WZ_OS_WIN) && defined(DEBUG_INSANE)
debug_register_callback( debug_callback_win32debug, NULL, NULL, NULL );
#endif // WZ_OS_WIN && DEBUG_INSANE
// *****
// NOTE: Try *NOT* to use debug() output routines without some other method of informing the user. All this output is sent to /dev/nul at this point on some platforms!
// *****
if (!getUTF8CmdLine(&utfargc, &utfargv))
{
return EXIT_FAILURE;
}
QTextCodec::setCodecForCStrings(QTextCodec::codecForName("UTF-8")); // make Qt treat all C strings in Warzone as UTF-8
setupExceptionHandler(utfargc, utfargv, version_getFormattedVersionString());
/*** Initialize PhysicsFS ***/
initialize_PhysicsFS(utfargv[0]);
/*** Initialize translations ***/
initI18n();
// find early boot info
if (!ParseCommandLineEarly(utfargc, utfargv))
{
return EXIT_FAILURE;
}
/* Initialize the write/config directory for PhysicsFS.
* This needs to be done __after__ the early commandline parsing,
* because the user might tell us to use an alternative configuration
* directory.
*/
initialize_ConfigDir();
/*** Initialize directory structure ***/
make_dir(ScreenDumpPath, "screenshots", NULL);
make_dir(SaveGamePath, "savegames", NULL);
PHYSFS_mkdir("savegames/campaign");
PHYSFS_mkdir("savegames/skirmish");
make_dir(MultiCustomMapsPath, "maps", NULL); // MUST have this to prevent crashes when getting map
PHYSFS_mkdir("music");
PHYSFS_mkdir("logs"); // a place to hold our netplay, mingw crash reports & WZ logs
PHYSFS_mkdir("userdata"); // a place to store per-mod data user generated data
memset(rulesettag, 0, sizeof(rulesettag)); // tag to add to userdata to find user generated stuff
make_dir(MultiPlayersPath, "multiplay", NULL);
make_dir(MultiPlayersPath, "multiplay", "players");
if (!customDebugfile)
{
// there was no custom debug file specified (--debug-file=blah)
// so we use our write directory to store our logs.
time_t aclock;
struct tm *newtime;
char buf[PATH_MAX];
time( &aclock ); // Get time in seconds
newtime = localtime( &aclock ); // Convert time to struct
// Note: We are using fopen(), and not physfs routines to open the file
// log name is logs/(or \)WZlog-MMDD_HHMMSS.txt
snprintf(buf, sizeof(buf), "%slogs%sWZlog-%02d%02d_%02d%02d%02d.txt", PHYSFS_getWriteDir(), PHYSFS_getDirSeparator(),
newtime->tm_mon + 1, newtime->tm_mday, newtime->tm_hour, newtime->tm_min, newtime->tm_sec );
debug_register_callback( debug_callback_file, debug_callback_file_init, debug_callback_file_exit, buf );
// FIXME: Change this to LOG_WZ on next release
debug(LOG_INFO, "Using %s debug file", buf);
}
// NOTE: it is now safe to use debug() calls to make sure output gets captured.
check_Physfs();
debug(LOG_WZ, "Warzone 2100 - %s", version_getFormattedVersionString());
debug(LOG_WZ, "Using language: %s", getLanguage());
debug(LOG_WZ, "Backend: %s", BACKEND);
debug(LOG_MEMORY, "sizeof: SIMPLE_OBJECT=%ld, BASE_OBJECT=%ld, DROID=%ld, STRUCTURE=%ld, FEATURE=%ld, PROJECTILE=%ld",
(long)sizeof(SIMPLE_OBJECT), (long)sizeof(BASE_OBJECT), (long)sizeof(DROID), (long)sizeof(STRUCTURE), (long)sizeof(FEATURE), (long)sizeof(PROJECTILE));
/* Put in the writedir root */
sstrcpy(KeyMapPath, "keymap.map");
// initialise all the command line states
war_SetDefaultStates();
debug(LOG_MAIN, "initializing");
PhysicsEngineHandler engine; // register abstract physfs filesystem
loadConfig();
// parse the command line
if (!ParseCommandLine(utfargc, utfargv))
{
return EXIT_FAILURE;
}
// Save new (commandline) settings
saveConfig();
// Find out where to find the data
scanDataDirs();
// Now we check the mods to see if they exist or not (specified on the command line)
// They are all capped at 100 mods max(see clparse.c)
// FIX ME: I know this is a bit hackish, but better than nothing for now?
{
char *modname;
char modtocheck[256];
int i = 0;
int result = 0;
// check global mods
for(i=0; i < 100; i++)
{
modname = global_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/global/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The (global) mod (%s) you have specified doesn't exist!", modname);
}
else
{
info("(global) mod (%s) is enabled", modname);
}
}
// check campaign mods
for(i=0; i < 100; i++)
{
modname = campaign_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/campaign/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The mod_ca (%s) you have specified doesn't exist!", modname);
}
else
{
info("mod_ca (%s) is enabled", modname);
}
}
// check multiplay mods
for(i=0; i < 100; i++)
{
modname = multiplay_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/multiplay/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The mod_mp (%s) you have specified doesn't exist!", modname);
}
else
{
info("mod_mp (%s) is enabled", modname);
}
}
}
if (!wzMain2(war_getFSAA(), war_getFullscreen(), war_GetVsync()))
{
return EXIT_FAILURE;
}
int w = pie_GetVideoBufferWidth();
int h = pie_GetVideoBufferHeight();
char buf[256];
ssprintf(buf, "Video Mode %d x %d (%s)", w, h, war_getFullscreen() ? "fullscreen" : "window");
addDumpInfo(buf);
debug(LOG_MAIN, "Final initialization");
if (!frameInitialise())
{
return EXIT_FAILURE;
}
if (!screenInitialise())
{
return EXIT_FAILURE;
}
if (!pie_LoadShaders())
{
return EXIT_FAILURE;
}
war_SetWidth(pie_GetVideoBufferWidth());
war_SetHeight(pie_GetVideoBufferHeight());
pie_SetFogStatus(false);
pie_ScreenFlip(CLEAR_BLACK);
pal_Init();
pie_LoadBackDrop(SCREEN_RANDOMBDROP);
pie_SetFogStatus(false);
pie_ScreenFlip(CLEAR_BLACK);
if (!systemInitialise())
{
return EXIT_FAILURE;
}
//set all the pause states to false
setAllPauseStates(false);
// Copy this info to be used by the crash handler for the dump file
ssprintf(buf,"Using Backend: %s", BACKEND);
addDumpInfo(buf);
ssprintf(buf,"Using language: %s", getLanguageName());
addDumpInfo(buf);
// Do the game mode specific initialisation.
switch(GetGameMode())
{
case GS_TITLE_SCREEN:
startTitleLoop();
break;
case GS_SAVEGAMELOAD:
initSaveGameLoad();
break;
case GS_NORMAL:
startGameLoop();
break;
default:
debug(LOG_ERROR, "Weirdy game status, I'm afraid!!");
break;
}
#if defined(WZ_CC_MSVC) && defined(DEBUG)
debug_MEMSTATS();
#endif
debug(LOG_MAIN, "Entering main loop");
wzMain3();
saveConfig();
systemShutdown();
#ifdef WZ_OS_WIN // clean up the memory allocated for the command line conversion
for (int i=0; i<argc; i++)
{
const char*** const utfargvF = &utfargv;
free((void *)(*utfargvF)[i]);
}
free(utfargv);
#endif
wzShutdown();
debug(LOG_MAIN, "Completed shutting down Warzone 2100");
return EXIT_SUCCESS;
}
/**
* First half of the command line parsing. Also see ParseCommandLine()
* below. The parameters here are needed early in the boot process,
* while the ones in ParseCommandLine can benefit from debugging being
* set up first.
* \param argc number of arguments given
* \param argv string array of the arguments
* \return Returns true on success, false on error */
bool ParseCommandLineEarly(int argc, const char **argv)
{
poptContext poptCon = poptGetContext(NULL, argc, argv, getOptionsTable(), 0);
int iOption;
#if defined(WZ_OS_MAC) && defined(DEBUG)
debug_enable_switch("all");
#endif /* WZ_OS_MAC && DEBUG */
/* loop through command line */
while ((iOption = poptGetNextOpt(poptCon)) > 0 || iOption == POPT_ERROR_BADOPT)
{
CLI_OPTIONS option = (CLI_OPTIONS)iOption;
const char *token;
if (iOption == POPT_ERROR_BADOPT)
{
qFatal("Unrecognized option: %s", poptBadOption(poptCon, 0));
}
switch (option)
{
case CLI_DEBUG:
// retrieve the debug section name
token = poptGetOptArg(poptCon);
if (token == NULL)
{
qFatal("Usage: --debug=<flag>");
}
// Attempt to enable the given debug section
if (!debug_enable_switch(token))
{
qFatal("Debug flag \"%s\" not found!", token);
}
break;
case CLI_DEBUGFILE:
// find the file name
token = poptGetOptArg(poptCon);
if (token == NULL)
{
qFatal("Missing debugfile filename?");
}
debug_register_callback(debug_callback_file, debug_callback_file_init, debug_callback_file_exit, (void *)token);
customDebugfile = true;
break;
case CLI_FLUSHDEBUGSTDERR:
// Tell the debug stderr output callback to always flush its output
debugFlushStderr();
break;
case CLI_CONFIGDIR:
// retrieve the configuration directory
token = poptGetOptArg(poptCon);
if (token == NULL)
{
qFatal("Unrecognised configuration directory");
}
sstrcpy(configdir, token);
break;
case CLI_HELP:
poptPrintHelp(poptCon, stdout, 0);
return false;
case CLI_VERSION:
printf("Warzone 2100 - %s\n", version_getFormattedVersionString());
return false;
default:
break;
};
}
return true;
}
int main(int argc, char *argv[])
{
QApplication app(argc, argv);
int utfargc = argc;
const char** utfargv = (const char**)argv;
#ifdef WZ_OS_MAC
cocoaInit();
#endif
debug_init();
debug_register_callback( debug_callback_stderr, NULL, NULL, NULL );
#if defined(WZ_OS_WIN) && defined(DEBUG_INSANE)
debug_register_callback( debug_callback_win32debug, NULL, NULL, NULL );
#endif // WZ_OS_WIN && DEBUG_INSANE
// *****
// NOTE: Try *NOT* to use debug() output routines without some other method of informing the user. All this output is sent to /dev/nul at this point on some platforms!
// *****
if (!getUTF8CmdLine(&utfargc, &utfargv))
{
return EXIT_FAILURE;
}
QTextCodec::setCodecForCStrings(QTextCodec::codecForName("UTF-8")); // make Qt treat all C strings in Warzone as UTF-8
setupExceptionHandler(utfargc, utfargv, version_getFormattedVersionString());
/*** Initialize PhysicsFS ***/
initialize_PhysicsFS(utfargv[0]);
/*** Initialize translations ***/
initI18n();
// find early boot info
if (!ParseCommandLineEarly(utfargc, utfargv))
{
return EXIT_FAILURE;
}
/* Initialize the write/config directory for PhysicsFS.
* This needs to be done __after__ the early commandline parsing,
* because the user might tell us to use an alternative configuration
* directory.
*/
initialize_ConfigDir();
/*** Initialize directory structure ***/
make_dir(ScreenDumpPath, "screenshots", NULL);
make_dir(SaveGamePath, "savegames", NULL);
make_dir(MultiCustomMapsPath, "maps", NULL); // MUST have this to prevent crashes when getting map
PHYSFS_mkdir("music");
PHYSFS_mkdir("logs"); // a place to hold our netplay, mingw crash reports & WZ logs
make_dir(MultiPlayersPath, "multiplay", NULL);
make_dir(MultiPlayersPath, "multiplay", "players");
if (!customDebugfile)
{
// there was no custom debug file specified (--debug-file=blah)
// so we use our write directory to store our logs.
time_t aclock;
struct tm *newtime;
char buf[PATH_MAX];
time( &aclock ); // Get time in seconds
newtime = localtime( &aclock ); // Convert time to struct
// Note: We are using fopen(), and not physfs routines to open the file
// log name is logs/(or \)WZlog-MMDD_HHMMSS.txt
snprintf(buf, sizeof(buf), "%slogs%sWZlog-%02d%02d_%02d%02d%02d.txt", PHYSFS_getWriteDir(), PHYSFS_getDirSeparator(),
newtime->tm_mon, newtime->tm_mday, newtime->tm_hour, newtime->tm_min, newtime->tm_sec );
debug_register_callback( debug_callback_file, debug_callback_file_init, debug_callback_file_exit, buf );
}
// NOTE: it is now safe to use debug() calls to make sure output gets captured.
check_Physfs();
debug(LOG_WZ, "Warzone 2100 - %s", version_getFormattedVersionString());
debug(LOG_WZ, "Using language: %s", getLanguage());
debug(LOG_MEMORY, "sizeof: SIMPLE_OBJECT=%ld, BASE_OBJECT=%ld, DROID=%ld, STRUCTURE=%ld, FEATURE=%ld, PROJECTILE=%ld",
(long)sizeof(SIMPLE_OBJECT), (long)sizeof(BASE_OBJECT), (long)sizeof(DROID), (long)sizeof(STRUCTURE), (long)sizeof(FEATURE), (long)sizeof(PROJECTILE));
/* Put in the writedir root */
sstrcpy(KeyMapPath, "keymap.map");
// initialise all the command line states
war_SetDefaultStates();
debug(LOG_MAIN, "initializing");
PhysicsEngineHandler engine; // register abstract physfs filesystem
loadConfig();
// parse the command line
if (!ParseCommandLine(utfargc, utfargv))
{
return EXIT_FAILURE;
}
// Save new (commandline) settings
saveConfig();
// Find out where to find the data
scanDataDirs();
// This needs to be done after "scanDataDirs"
// for the root cert from cacert.
NETinit(true);
// Must be run before OpenGL driver is properly initialized due to
// strange conflicts - Per
if (selfTest)
{
memset(enabled_debug, 0, sizeof(*enabled_debug) * LOG_LAST);
fprintf(stdout, "Carrying out self-test:\n");
playListTest();
audioTest();
soundTest();
}
// Now we check the mods to see if they exist or not (specified on the command line)
// They are all capped at 100 mods max(see clparse.c)
// FIX ME: I know this is a bit hackish, but better than nothing for now?
{
char *modname;
char modtocheck[256];
int i = 0;
int result = 0;
// check global mods
for(i=0; i < 100; i++)
{
modname = global_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/global/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The (global) mod (%s) you have specified doesn't exist!", modname);
}
else
{
info("(global) mod (%s) is enabled", modname);
}
}
// check campaign mods
for(i=0; i < 100; i++)
{
modname = campaign_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/campaign/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The mod_ca (%s) you have specified doesn't exist!", modname);
}
else
{
info("mod_ca (%s) is enabled", modname);
}
}
// check multiplay mods
for(i=0; i < 100; i++)
{
modname = multiplay_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/multiplay/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The mod_mp (%s) you have specified doesn't exist!", modname);
}
else
{
info("mod_mp (%s) is enabled", modname);
}
}
}
debug(LOG_MAIN, "Qt initialization");
QGL::setPreferredPaintEngine(QPaintEngine::OpenGL); // Workaround for incorrect text rendering on nany platforms.
// Setting up OpenGL
QGLFormat format;
format.setDoubleBuffer(true);
format.setAlpha(true);
int w = pie_GetVideoBufferWidth();
int h = pie_GetVideoBufferHeight();
if (war_getFSAA())
{
format.setSampleBuffers(true);
format.setSamples(war_getFSAA());
}
WzMainWindow mainwindow(QSize(w, h), format);
mainwindow.setMinimumResolution(QSize(800, 600));
if (!mainwindow.context()->isValid())
{
QMessageBox::critical(NULL, "Oops!", "Warzone2100 failed to create an OpenGL context. This probably means that your graphics drivers are out of date. Try updating them!");
return EXIT_FAILURE;
}
screenWidth = w;
screenHeight = h;
if (war_getFullscreen())
{
mainwindow.resize(w,h);
mainwindow.showFullScreen();
if(w>mainwindow.width()) {
w = mainwindow.width();
}
if(h>mainwindow.height()) {
h = mainwindow.height();
}
pie_SetVideoBufferWidth(w);
pie_SetVideoBufferHeight(h);
}
else
{
mainwindow.show();
mainwindow.setMinimumSize(w, h);
mainwindow.setMaximumSize(w, h);
}
mainwindow.setSwapInterval(war_GetVsync());
war_SetVsync(mainwindow.swapInterval() > 0);
mainwindow.setReadyToPaint();
char buf[256];
ssprintf(buf, "Video Mode %d x %d (%s)", w, h, war_getFullscreen() ? "fullscreen" : "window");
addDumpInfo(buf);
debug(LOG_MAIN, "Final initialization");
if (!frameInitialise())
{
return EXIT_FAILURE;
}
war_SetWidth(pie_GetVideoBufferWidth());
war_SetHeight(pie_GetVideoBufferHeight());
pie_SetFogStatus(false);
pie_ScreenFlip(CLEAR_BLACK);
pal_Init();
pie_LoadBackDrop(SCREEN_RANDOMBDROP);
pie_SetFogStatus(false);
pie_ScreenFlip(CLEAR_BLACK);
if (!systemInitialise())
{
return EXIT_FAILURE;
}
//set all the pause states to false
setAllPauseStates(false);
/* Runtime unit testing */
if (selfTest)
{
parseTest();
levTest();
mapTest();
fprintf(stdout, "All tests PASSED!\n");
exit(0);
}
// Copy this info to be used by the crash handler for the dump file
ssprintf(buf,"Using language: %s", getLanguageName());
addDumpInfo(buf);
// Do the game mode specific initialisation.
switch(GetGameMode())
{
case GS_TITLE_SCREEN:
startTitleLoop();
break;
case GS_SAVEGAMELOAD:
initSaveGameLoad();
break;
case GS_NORMAL:
startGameLoop();
break;
default:
debug(LOG_ERROR, "Weirdy game status, I'm afraid!!");
break;
}
#if defined(WZ_CC_MSVC) && defined(DEBUG)
debug_MEMSTATS();
#endif
debug(LOG_MAIN, "Entering main loop");
app.exec();
saveConfig();
systemShutdown();
debug(LOG_MAIN, "Completed shutting down Warzone 2100");
return EXIT_SUCCESS;
}
int main(int argc, char *argv[])
{
int utfargc = argc;
const char** utfargv = (const char**)argv;
#ifdef WZ_OS_MAC
cocoaInit();
#endif
debug_init();
debug_register_callback( debug_callback_stderr, NULL, NULL, NULL );
#if defined(WZ_OS_WIN) && defined(DEBUG_INSANE)
debug_register_callback( debug_callback_win32debug, NULL, NULL, NULL );
#endif // WZ_OS_WIN && DEBUG_INSANE
if (!getUTF8CmdLine(&utfargc, &utfargv))
{
return -1;
}
setupExceptionHandler(utfargc, utfargv);
/*** Initialize PhysicsFS ***/
initialize_PhysicsFS(utfargv[0]);
/*** Initialize translations ***/
initI18n();
// find early boot info
if ( !ParseCommandLineEarly(utfargc, utfargv) ) {
return -1;
}
debug(LOG_WZ, "Using language: %s", getLanguage());
debug(LOG_MEMORY, "sizeof: SIMPLE_OBJECT=%ld, BASE_OBJECT=%ld, DROID=%ld, STRUCTURE=%ld, FEATURE=%ld, PROJECTILE=%ld",
(long)sizeof(SIMPLE_OBJECT), (long)sizeof(BASE_OBJECT), (long)sizeof(DROID), (long)sizeof(STRUCTURE), (long)sizeof(FEATURE), (long)sizeof(PROJECTILE));
/* Initialize the write/config directory for PhysicsFS.
* This needs to be done __after__ the early commandline parsing,
* because the user might tell us to use an alternative configuration
* directory.
*/
initialize_ConfigDir();
/*** Initialize directory structure ***/
make_dir(ScreenDumpPath, "screenshots", NULL);
make_dir(SaveGamePath, "savegame", NULL);
make_dir(MultiCustomMapsPath, "maps", NULL); // MUST have this to prevent crashes when getting map
PHYSFS_mkdir("music");
PHYSFS_mkdir("logs"); // a place to hold our netplay, mingw crash reports & WZ logs
make_dir(MultiPlayersPath, "multiplay", NULL);
make_dir(MultiPlayersPath, "multiplay", "players");
if (!customDebugfile)
{
// there was no custom debug file specified (--debug-file=blah)
// so we use our write directory to store our logs.
time_t aclock;
struct tm *newtime;
char buf[PATH_MAX];
time( &aclock ); // Get time in seconds
newtime = localtime( &aclock ); // Convert time to struct
// Note: We are using fopen(), and not physfs routines to open the file
// log name is logs/(or \)WZlog-MMDD_HHMMSS.txt
snprintf(buf, sizeof(buf), "%slogs%sWZlog-%02d%02d_%02d%02d%02d.txt", PHYSFS_getWriteDir(), PHYSFS_getDirSeparator(),
newtime->tm_mon, newtime->tm_mday, newtime->tm_hour, newtime->tm_min, newtime->tm_sec );
debug_register_callback( debug_callback_file, debug_callback_file_init, debug_callback_file_exit, buf );
}
debug(LOG_WZ, "Warzone 2100 - %s", version_getFormattedVersionString());
/* Put these files in the writedir root */
setRegistryFilePath("config");
sstrcpy(KeyMapPath, "keymap.map");
// initialise all the command line states
war_SetDefaultStates();
debug(LOG_MAIN, "initializing");
loadConfig();
NETinit(true);
// parse the command line
if (!ParseCommandLine(utfargc, utfargv)) {
return -1;
}
// Save new (commandline) settings
saveConfig();
// Find out where to find the data
scanDataDirs();
// Must be run before OpenGL driver is properly initialized due to
// strange conflicts - Per
if (selfTest)
{
memset(enabled_debug, 0, sizeof(*enabled_debug) * LOG_LAST);
fprintf(stdout, "Carrying out self-test:\n");
playListTest();
audioTest();
soundTest();
}
// Now we check the mods to see if they exsist or not (specified on the command line)
// They are all capped at 100 mods max(see clparse.c)
// FIX ME: I know this is a bit hackish, but better than nothing for now?
{
char *modname;
char modtocheck[256];
int i = 0;
int result = 0;
// check global mods
for(i=0; i < 100; i++)
{
modname = global_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/global/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The (global) mod (%s) you have specified doesn't exist!", modname);
}
else
{
info("(global) mod (%s) is enabled", modname);
}
}
// check campaign mods
for(i=0; i < 100; i++)
{
modname = campaign_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/campaign/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The mod_ca (%s) you have specified doesn't exist!", modname);
}
else
{
info("mod_ca (%s) is enabled", modname);
}
}
// check multiplay mods
for(i=0; i < 100; i++)
{
modname = multiplay_mods[i];
if (modname == NULL)
{
break;
}
ssprintf(modtocheck, "mods/multiplay/%s", modname);
result = PHYSFS_exists(modtocheck);
result |= PHYSFS_isDirectory(modtocheck);
if (!result)
{
debug(LOG_ERROR, "The mod_mp (%s) you have specified doesn't exist!", modname);
}
else
{
info("mod_mp (%s) is enabled", modname);
}
}
}
if (!frameInitialise( "Warzone 2100", pie_GetVideoBufferWidth(), pie_GetVideoBufferHeight(), pie_GetVideoBufferDepth(), war_getFSAA(), war_getFullscreen(), war_GetVsync()))
{
return -1;
}
war_SetWidth(pie_GetVideoBufferWidth());
war_SetHeight(pie_GetVideoBufferHeight());
pie_SetFogStatus(false);
pie_ScreenFlip(CLEAR_BLACK);
pal_Init();
pie_LoadBackDrop(SCREEN_RANDOMBDROP);
pie_SetFogStatus(false);
pie_ScreenFlip(CLEAR_BLACK);
if (!systemInitialise())
{
return -1;
}
//set all the pause states to false
setAllPauseStates(false);
/* Runtime unit testing */
if (selfTest)
{
tagTest();
parseTest();
levTest();
mapTest();
fprintf(stdout, "All tests PASSED!\n");
exit(0);
}
{
// Copy this info to be used by the crash handler for the dump file
char buf[256];
ssprintf(buf,"Using language: %s", getLanguageName());
addDumpInfo(buf);
}
// Do the game mode specific initialisation.
switch(GetGameMode())
{
case GS_TITLE_SCREEN:
startTitleLoop();
break;
case GS_SAVEGAMELOAD:
initSaveGameLoad();
break;
case GS_NORMAL:
startGameLoop();
break;
default:
debug(LOG_ERROR, "Weirdy game status, I'm afraid!!");
break;
}
debug(LOG_MAIN, "Entering main loop");
// Enter the mainloop
mainLoop();
debug(LOG_MAIN, "Shutting down Warzone 2100");
#if defined(WZ_CC_MSVC) && defined(DEBUG)
debug_MEMSTATS();
#endif
atexit(systemShutdown);
return EXIT_SUCCESS;
}
