void
rce::gui::RImageMarkerScene::
deleteObject(quint32 id)
{
deletePolygon(id);
deletePolyline(id);
deletePoint(id);
}
void
rce::gui::RImageMarkerScene::
addPolygonObject(const QPolygonF &polygon,
const QBrush &brush,
const QPen &pen,
quint32 id)
{
// remove old if exists
deletePolygon(id);
// create new
QPolygonF closedPolygon = polygon;
closePolygon(closedPolygon);
QGraphicsPolygonItem *newItem = addPolygon(closedPolygon, pen, brush);
newItem->setData(RCE_ITEM_TYPE_DATA_INDEX, PolygonType);
newItem->setData(RCE_ITEM_ID_DATA_INDEX, id);
newItem->setZValue(1);
polygonItems_[id] = newItem;
}
//-----------------------------------------------------------------------
void ConvexBody::mergePolygons( void )
{
// Merge all polygons that lay in the same plane as one big polygon.
// A convex body does not have two separate regions (separated by polygons
// with different normals) where the same normal occurs, so we can simply
// search all similar normals of a polygon. Two different options are
// possible when the normals fit:
// - the two polygons are neighbors
// - the two polygons aren't neighbors (but a third, fourth,.. polygon lays
// in between)
// Signals if the body holds polygons which aren't neighbors but have the same
// normal. That means another step has to be processed.
bool bDirty = false;
for ( size_t iPolyA = 0; iPolyA < getPolygonCount(); ++iPolyA )
{
// ??
OgreAssert( iPolyA >= 0, "strange..." );
for ( size_t iPolyB = iPolyA+1; iPolyB < getPolygonCount(); ++iPolyB )
{
const Vector3& n1 = getNormal( iPolyA );
const Vector3& n2 = getNormal( iPolyB );
// if the normals point into the same direction
if ( n1.directionEquals( n2, Radian( Degree( 0.00001 ) ) ) )
{
// indicates if a neighbor has been found and joined
bool bFound = false;
// search the two fitting vertices (if there are any) for the common edge
const size_t numVerticesA = getVertexCount( iPolyA );
for ( size_t iVertexA = 0; iVertexA < numVerticesA; ++iVertexA )
{
const size_t numVerticesB = getVertexCount( iPolyB );
for ( size_t iVertexB = 0; iVertexB < numVerticesB; ++iVertexB )
{
const Vector3& aCurrent = getVertex( iPolyA, iVertexA );
const Vector3& aNext = getVertex( iPolyA, (iVertexA + 1) % getVertexCount( iPolyA ) );
const Vector3& bCurrent = getVertex( iPolyB, iVertexB );
const Vector3& bNext = getVertex( iPolyB, (iVertexB + 1) % getVertexCount( iPolyB ) );
// if the edge is the same the current vertex of A has to be equal to the next of B and the other
// way round
if ( aCurrent.positionEquals(bNext) &&
bCurrent.positionEquals(aNext))
{
// polygons are neighbors, assemble new one
Polygon *pNew = allocatePolygon();
// insert all vertices of A up to the join (including the common vertex, ignoring
// whether the first vertex of A may be a shared vertex)
for ( size_t i = 0; i <= iVertexA; ++i )
{
pNew->insertVertex( getVertex( iPolyA, i%numVerticesA ) );
}
// insert all vertices of B _after_ the join to the end
for ( size_t i = iVertexB + 2; i < numVerticesB; ++i )
{
pNew->insertVertex( getVertex( iPolyB, i ) );
}
// insert all vertices of B from the beginning up to the join (including the common vertex
// and excluding the first vertex if the first is part of the shared edge)
for ( size_t i = 0; i <= iVertexB; ++i )
{
pNew->insertVertex( getVertex( iPolyB, i%numVerticesB ) );
}
// insert all vertices of A _after_ the join to the end
for ( size_t i = iVertexA + 2; i < numVerticesA; ++i )
{
pNew->insertVertex( getVertex( iPolyA, i ) );
}
// in case there are double vertices (in special cases), remove them
for ( size_t i = 0; i < pNew->getVertexCount(); ++i )
{
const Vector3& a = pNew->getVertex( i );
const Vector3& b = pNew->getVertex( (i + 1) % pNew->getVertexCount() );
// if the two vertices are the same...
if (a.positionEquals(b))
{
// remove a
pNew->deleteVertex( i );
// decrement counter
--i;
}
}
// delete the two old ones
OgreAssert( iPolyA != iPolyB, "PolyA and polyB are the same!" );
// polyB is always higher than polyA, so delete polyB first
deletePolygon( iPolyB );
deletePolygon( iPolyA );
// continue with next (current is deleted, so don't jump to the next after the next)
--iPolyA;
--iPolyB;
// insert new polygon
insertPolygon( pNew );
bFound = true;
break;
}
}
if ( bFound )
{
break;
}
}
if ( bFound == false )
{
// there are two polygons available with the same normal direction, but they
// could not be merged into one single because of no shared edge
bDirty = true;
break;
}
}
}
}
// recursion to merge the previous non-neighbors
if ( bDirty )
{
mergePolygons();
}
}
//-----------------------------------------------------------------------
void ConvexBody::extend(const Vector3& pt)
{
// Erase all polygons facing towards the point. For all edges that
// are not removed twice (once in AB and once BA direction) build a
// convex polygon (triangle) with the point.
Polygon::EdgeMap edgeMap;
for ( size_t i = 0; i < getPolygonCount(); ++i )
{
const Vector3& normal = getNormal( i );
// direction of the point in regard to the polygon
// the polygon is planar so we can take an arbitrary vertex
Vector3 ptDir = pt - getVertex( i, 0 );
ptDir.normalise();
// remove polygon if dot product is greater or equals null.
if ( normal.dotProduct( ptDir ) >= 0 )
{
// store edges (copy them because if the polygon is deleted
// its vertices are also deleted)
storeEdgesOfPolygon( i, &edgeMap );
// remove polygon
deletePolygon( i );
// decrement iterator because of deleted polygon
--i;
}
}
// point is already a part of the hull (point lies inside)
if ( edgeMap.empty() )
return;
// remove the edges that are twice in the list (once from each side: AB,BA)
Polygon::EdgeMap::iterator it;
// iterate from first to the element before the last one
for (Polygon::EdgeMap::iterator itStart = edgeMap.begin();
itStart != edgeMap.end(); )
{
// compare with iterator + 1 to end
// don't need to skip last entry in itStart since omitted in inner loop
it = itStart;
++it;
bool erased = false;
// iterate from itStart+1 to the element before the last one
for ( ; it != edgeMap.end(); ++it )
{
if (itStart->first.positionEquals(it->second) &&
itStart->second.positionEquals(it->first))
{
edgeMap.erase(it);
// increment itStart before deletion (iterator invalidation)
Polygon::EdgeMap::iterator delistart = itStart++;
edgeMap.erase(delistart);
erased = true;
break; // found and erased
}
}
// increment itStart if we didn't do it when erasing
if (!erased)
++itStart;
}
// use the remaining edges to build triangles with the point
// the vertices of the edges are in ccw order (edgePtA-edgePtB-point
// to form a ccw polygon)
while ( !edgeMap.empty() )
{
Polygon::EdgeMap::iterator mapIt = edgeMap.begin();
// build polygon it.first, it.second, point
Polygon *p = allocatePolygon();
p->insertVertex(mapIt->first);
p->insertVertex(mapIt->second);
p->insertVertex( pt );
// attach polygon to body
insertPolygon( p );
// erase the vertices from the list
// pointers are now held by the polygon
edgeMap.erase( mapIt );
}
}
