static int sdhci_acpi_add_own_cd(struct device *dev, struct mmc_host *mmc)
{
struct gpio_desc *desc;
unsigned long flags;
int err, irq;
desc = devm_gpiod_get_index(dev, "sd_cd", 0);
if (IS_ERR(desc)) {
err = PTR_ERR(desc);
goto out;
}
err = gpiod_direction_input(desc);
if (err)
goto out_free;
irq = gpiod_to_irq(desc);
if (irq < 0) {
err = irq;
goto out_free;
}
flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;
err = devm_request_irq(dev, irq, sdhci_acpi_sd_cd, flags, "sd_cd", mmc);
if (err)
goto out_free;
return 0;
out_free:
devm_gpiod_put(dev, desc);
out:
dev_warn(dev, "failed to setup card detect wake up\n");
return err;
}
/**
* mmc_gpiod_request_cd - request a gpio descriptor for card-detection
* @host: mmc host
* @con_id: function within the GPIO consumer
* @idx: index of the GPIO to obtain in the consumer
* @override_active_level: ignore %GPIO_ACTIVE_LOW flag
* @debounce: debounce time in microseconds
* @gpio_invert: will return whether the GPIO line is inverted or not, set
* to NULL to ignore
*
* Use this function in place of mmc_gpio_request_cd() to use the GPIO
* descriptor API. Note that it is paired with mmc_gpiod_free_cd() not
* mmc_gpio_free_cd(). Note also that it must be called prior to mmc_add_host()
* otherwise the caller must also call mmc_gpiod_request_cd_irq().
*
* Returns zero on success, else an error.
*/
int mmc_gpiod_request_cd(struct mmc_host *host, const char *con_id,
unsigned int idx, bool override_active_level,
unsigned int debounce, bool *gpio_invert)
{
struct mmc_gpio *ctx;
struct gpio_desc *desc;
int ret;
ret = mmc_gpio_alloc(host);
if (ret < 0)
return ret;
ctx = host->slot.handler_priv;
if (!con_id)
con_id = ctx->cd_label;
desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
if (IS_ERR(desc))
return PTR_ERR(desc);
if (debounce) {
ret = gpiod_set_debounce(desc, debounce);
if (ret < 0)
return ret;
}
if (gpio_invert)
*gpio_invert = !gpiod_is_active_low(desc);
ctx->override_cd_active_level = override_active_level;
ctx->cd_gpio = desc;
return 0;
}
/**
* mmc_gpiod_request_ro - request a gpio descriptor for write protection
* @host: mmc host
* @con_id: function within the GPIO consumer
* @idx: index of the GPIO to obtain in the consumer
* @debounce: debounce time in microseconds
* @gpio_invert: will return whether the GPIO line is inverted or not,
* set to NULL to ignore
*
* Returns zero on success, else an error.
*/
int mmc_gpiod_request_ro(struct mmc_host *host, const char *con_id,
unsigned int idx,
unsigned int debounce, bool *gpio_invert)
{
struct mmc_gpio *ctx = host->slot.handler_priv;
struct gpio_desc *desc;
int ret;
desc = devm_gpiod_get_index(host->parent, con_id, idx, GPIOD_IN);
if (IS_ERR(desc))
return PTR_ERR(desc);
if (debounce) {
ret = gpiod_set_debounce(desc, debounce);
if (ret < 0)
return ret;
}
if (gpio_invert)
*gpio_invert = !gpiod_is_active_low(desc);
ctx->ro_gpio = desc;
return 0;
}
static int st_nci_i2c_acpi_request_resources(struct i2c_client *client)
{
struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
struct gpio_desc *gpiod_reset;
struct device *dev = &client->dev;
u8 tmp;
/* Get RESET GPIO from ACPI */
gpiod_reset = devm_gpiod_get_index(dev, ST_NCI_GPIO_NAME_RESET, 1,
GPIOD_OUT_HIGH);
if (IS_ERR(gpiod_reset)) {
nfc_err(dev, "Unable to get RESET GPIO\n");
return -ENODEV;
}
phy->gpio_reset = desc_to_gpio(gpiod_reset);
phy->irq_polarity = irq_get_trigger_type(client->irq);
phy->se_status.is_ese_present = false;
phy->se_status.is_uicc_present = false;
if (device_property_present(dev, "ese-present")) {
device_property_read_u8(dev, "ese-present", &tmp);
phy->se_status.is_ese_present = tmp;
}
if (device_property_present(dev, "uicc-present")) {
device_property_read_u8(dev, "uicc-present", &tmp);
phy->se_status.is_uicc_present = tmp;
}
return 0;
}
static int nokia_modem_gpio_probe(struct device *dev)
{
struct device_node *np = dev->of_node;
struct nokia_modem_device *modem = dev_get_drvdata(dev);
int gpio_count, gpio_name_count, i, err;
gpio_count = of_gpio_count(np);
if (gpio_count < 0) {
dev_err(dev, "missing gpios: %d\n", gpio_count);
return gpio_count;
}
gpio_name_count = of_property_count_strings(np, "gpio-names");
if (gpio_count != gpio_name_count) {
dev_err(dev, "number of gpios does not equal number of gpio names\n");
return -EINVAL;
}
modem->gpios = devm_kzalloc(dev, gpio_count *
sizeof(struct nokia_modem_gpio), GFP_KERNEL);
if (!modem->gpios) {
dev_err(dev, "Could not allocate memory for gpios\n");
return -ENOMEM;
}
modem->gpio_amount = gpio_count;
for (i = 0; i < gpio_count; i++) {
modem->gpios[i].gpio = devm_gpiod_get_index(dev, NULL, i);
if (IS_ERR(modem->gpios[i].gpio)) {
dev_err(dev, "Could not get gpio %d\n", i);
return PTR_ERR(modem->gpios[i].gpio);
}
err = of_property_read_string_index(np, "gpio-names", i,
&(modem->gpios[i].name));
if (err) {
dev_err(dev, "Could not get gpio name %d\n", i);
return err;
}
err = gpiod_direction_output(modem->gpios[i].gpio, 0);
if (err)
return err;
err = gpiod_export(modem->gpios[i].gpio, 0);
if (err)
return err;
err = gpiod_export_link(dev, modem->gpios[i].name,
modem->gpios[i].gpio);
if (err)
return err;
}
return 0;
}
static int mdio_gpio_get_data(struct device *dev,
struct mdio_gpio_info *bitbang)
{
bitbang->mdc = devm_gpiod_get_index(dev, NULL, MDIO_GPIO_MDC,
GPIOD_OUT_LOW);
if (IS_ERR(bitbang->mdc))
return PTR_ERR(bitbang->mdc);
bitbang->mdio = devm_gpiod_get_index(dev, NULL, MDIO_GPIO_MDIO,
GPIOD_IN);
if (IS_ERR(bitbang->mdio))
return PTR_ERR(bitbang->mdio);
bitbang->mdo = devm_gpiod_get_index_optional(dev, NULL, MDIO_GPIO_MDO,
GPIOD_OUT_LOW);
return PTR_ERR_OR_ZERO(bitbang->mdo);
}
static int nxp_nci_i2c_acpi_config(struct nxp_nci_i2c_phy *phy)
{
struct i2c_client *client = phy->i2c_dev;
struct gpio_desc *gpiod_en, *gpiod_fw;
gpiod_en = devm_gpiod_get_index(&client->dev, NULL, 2, GPIOD_OUT_LOW);
gpiod_fw = devm_gpiod_get_index(&client->dev, NULL, 1, GPIOD_OUT_LOW);
if (IS_ERR(gpiod_en) || IS_ERR(gpiod_fw)) {
nfc_err(&client->dev, "No GPIOs\n");
return -EINVAL;
}
phy->gpio_en = desc_to_gpio(gpiod_en);
phy->gpio_fw = desc_to_gpio(gpiod_fw);
return 0;
}
static int bdw_rt5677_init(struct snd_soc_pcm_runtime *rtd)
{
struct bdw_rt5677_priv *bdw_rt5677 =
snd_soc_card_get_drvdata(rtd->card);
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
/* Enable codec ASRC function for Stereo DAC/Stereo1 ADC/DMIC/I2S1.
* The ASRC clock source is clk_i2s1_asrc.
*/
rt5677_sel_asrc_clk_src(codec, RT5677_DA_STEREO_FILTER |
RT5677_AD_STEREO1_FILTER | RT5677_I2S1_SOURCE,
RT5677_CLK_SEL_I2S1_ASRC);
/* Request rt5677 GPIO for headphone amp control */
bdw_rt5677->gpio_hp_en = devm_gpiod_get_index(codec->dev,
"RT5677_GPIO_HP_AMP_SHDN_L", RT5677_GPIO_HP_AMP_SHDN_L, GPIOD_ASIS);
if (IS_ERR(bdw_rt5677->gpio_hp_en)) {
dev_err(codec->dev, "Can't find HP_AMP_SHDN_L gpio\n");
return PTR_ERR(bdw_rt5677->gpio_hp_en);
}
gpiod_direction_output(bdw_rt5677->gpio_hp_en, 0);
/* Create and initialize headphone jack */
if (!snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
&headphone_jack)) {
if (snd_soc_jack_add_pins(&headphone_jack, 1,
&headphone_jack_pin))
dev_err(codec->dev, "Can't add headphone jack pin\n");
headphone_jack_gpio.gpiod_dev = codec->dev;
if (snd_soc_jack_add_gpios(&headphone_jack, 1,
&headphone_jack_gpio))
dev_err(codec->dev, "Can't add headphone jack gpio\n");
} else {
dev_err(codec->dev, "Can't create headphone jack\n");
}
/* Create and initialize mic jack */
if (!snd_soc_jack_new(codec, "Mic Jack", SND_JACK_MICROPHONE,
&mic_jack)) {
if (snd_soc_jack_add_pins(&mic_jack, 1, &mic_jack_pin))
dev_err(codec->dev, "Can't add mic jack pin\n");
mic_jack_gpio.gpiod_dev = codec->dev;
if (snd_soc_jack_add_gpios(&mic_jack, 1, &mic_jack_gpio))
dev_err(codec->dev, "Can't add mic jack gpio\n");
} else {
dev_err(codec->dev, "Can't create mic jack\n");
}
bdw_rt5677->codec = codec;
snd_soc_dapm_force_enable_pin(dapm, "MICBIAS1");
return 0;
}
/**
* devm_gpiod_get_index_optional - Resource-managed gpiod_get_index_optional()
* @dev: GPIO consumer
* @con_id: function within the GPIO consumer
* @index: index of the GPIO to obtain in the consumer
* @flags: optional GPIO initialization flags
*
* Managed gpiod_get_index_optional(). GPIO descriptors returned from this
* function are automatically disposed on driver detach. See
* gpiod_get_index_optional() for detailed information about behavior and
* return values.
*/
struct gpio_desc *__must_check __devm_gpiod_get_index_optional(struct device *dev,
const char *con_id,
unsigned int index,
enum gpiod_flags flags)
{
struct gpio_desc *desc;
desc = devm_gpiod_get_index(dev, con_id, index, flags);
if (IS_ERR(desc)) {
if (PTR_ERR(desc) == -ENOENT)
return NULL;
}
return desc;
}
static int gsl_ts_probe(struct i2c_client *client, const struct i2c_device_id *id)
{
struct gsl_ts_data *ts;
const struct firmware *fw = NULL;
unsigned long irqflags;
int error;
bool acpipower;
dev_warn(&client->dev, "%s: got a device named %s at address 0x%x, IRQ %d, flags 0x%x\n", __func__, client->name, client->addr, client->irq, client->flags);
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
dev_err(&client->dev, "%s: i2c check functionality error\n", __func__);
error = -ENXIO;
goto release;
}
if (client->irq <= 0) {
dev_err(&client->dev, "%s: missing IRQ configuration\n", __func__);
error = -ENODEV;
goto release;
}
ts = devm_kzalloc(&client->dev, sizeof(struct gsl_ts_data), GFP_KERNEL);
if (!ts) {
error = -ENOMEM;
goto release;
}
ts->client = client;
i2c_set_clientdata(client, ts);
if (gsl_fw_name != NULL) {
strncpy(ts->fw_name, gsl_fw_name, sizeof(ts->fw_name));
} else {
strncpy(ts->fw_name, GSL_FW_NAME_DEFAULT, sizeof(ts->fw_name));
}
error = request_firmware(&fw, ts->fw_name, &ts->client->dev);
if (error < 0) {
dev_err(&client->dev, "%s: failed to load firmware: %d\n", __func__, error);
goto release;
}
error = gsl_ts_init(ts, fw);
if (error < 0) {
dev_err(&client->dev, "%s: failed to initialize: %d\n", __func__, error);
goto release;
}
ts->input = devm_input_allocate_device(&client->dev);
if (!ts->input) {
dev_err(&client->dev, "%s: failed to allocate input device\n", __func__);
error = -ENOMEM;
goto release;
}
ts->input->name = "Silead GSLx680 Touchscreen";
ts->input->id.bustype = BUS_I2C;
ts->input->phys = "input/ts";
input_set_capability(ts->input, EV_ABS, ABS_X);
input_set_capability(ts->input, EV_ABS, ABS_Y);
input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, ts->jitter, ts->deadzone);
input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, ts->jitter, ts->deadzone);
input_mt_init_slots(ts->input, ts->multi_touches, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK);
input_set_drvdata(ts->input, ts);
error = input_register_device(ts->input);
if (error) {
dev_err(&client->dev, "%s: unable to register input device: %d\n", __func__, error);
goto release;
}
/* Try to use ACPI power methods first */
acpipower = false;
#ifdef CONFIG_ACPI
if (ACPI_COMPANION(&client->dev)) {
/* Wake the device up with a power on reset */
if (acpi_bus_set_power(ACPI_HANDLE(&client->dev), ACPI_STATE_D3)) {
dev_warn(&client->dev, "%s: failed to wake up device through ACPI: %d, using GPIO controls instead\n", __func__, error);
} else {
acpipower = true;
}
}
#endif
/* Not available, use GPIO settings from DSDT/DT instead */
if (!acpipower) {
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 17, 0)
ts->gpio = devm_gpiod_get_index(&client->dev, GSL_PWR_GPIO, 0);
#else
ts->gpio = devm_gpiod_get_index(&client->dev, GSL_PWR_GPIO, 0, GPIOD_OUT_LOW);
#endif
if (IS_ERR(ts->gpio)) {
dev_err(&client->dev, "%s: error obtaining power pin GPIO resource\n", __func__);
error = PTR_ERR(ts->gpio);
goto release;
}
#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 17, 0)
error = gpiod_direction_output(ts->gpio, 0);
if (error < 0) {
dev_err(&client->dev, "%s: error setting GPIO pin direction\n", __func__);
goto release;
}
#endif
} else {
ts->gpio = NULL;
}
/* Enable power */
gsl_ts_power(client, false);
/* Execute the controller startup sequence */
error = gsl_ts_reset_chip(client);
if (error < 0) {
dev_err(&client->dev, "%s: chip reset failed\n", __func__);
goto release;
}
error = gsl_ts_write_fw(ts, fw);
if (error < 0) {
dev_err(&client->dev, "%s: firmware transfer failed\n", __func__);
goto release;
}
error = gsl_ts_startup_chip(client);
if (error < 0) {
dev_err(&client->dev, "%s: chip startup failed\n", __func__);
goto release;
}
/*
* Systems using device tree should set up interrupt via DTS,
* the rest will use the default falling edge interrupts.
*/
irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING;
/* Set up interrupt handler - do we still need to account for shared interrupts? */
error = devm_request_threaded_irq(
&client->dev,
client->irq,
NULL,
gsl_ts_irq,
irqflags | IRQF_ONESHOT,
client->name,
ts
);
if (error) {
dev_err(&client->dev, "%s: failed to register interrupt\n", __func__);
goto release;
}
/*
* Systems using device tree should set up wakeup via DTS,
* the rest will configure device as wakeup source by default.
*/
if (!client->dev.of_node) {
device_init_wakeup(&client->dev, true);
}
ts->state = GSL_TS_GREEN;
release:
if (fw) {
release_firmware(fw);
}
if (error < 0) {
return error;
}
return 0;
}
/**
* devm_gpiod_get - Resource-managed gpiod_get()
* @dev: GPIO consumer
* @con_id: function within the GPIO consumer
* @flags: optional GPIO initialization flags
*
* Managed gpiod_get(). GPIO descriptors returned from this function are
* automatically disposed on driver detach. See gpiod_get() for detailed
* information about behavior and return values.
*/
struct gpio_desc *__must_check __devm_gpiod_get(struct device *dev,
const char *con_id,
enum gpiod_flags flags)
{
return devm_gpiod_get_index(dev, con_id, 0, flags);
}
static int tpd_probe(struct platform_device *pdev)
{
struct omap_dss_device *in, *dssdev;
struct panel_drv_data *ddata;
int r;
struct gpio_desc *gpio;
ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
if (!ddata)
return -ENOMEM;
platform_set_drvdata(pdev, ddata);
if (!pdev->dev.of_node)
return -ENODEV;
r = tpd_probe_of(pdev);
if (r)
return r;
gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 0,
GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
r = PTR_ERR(gpio);
goto err_gpio;
}
ddata->ct_cp_hpd_gpio = gpio;
gpio = devm_gpiod_get_index_optional(&pdev->dev, NULL, 1,
GPIOD_OUT_LOW);
if (IS_ERR(gpio)) {
r = PTR_ERR(gpio);
goto err_gpio;
}
ddata->ls_oe_gpio = gpio;
gpio = devm_gpiod_get_index(&pdev->dev, NULL, 2,
GPIOD_IN);
if (IS_ERR(gpio)) {
r = PTR_ERR(gpio);
goto err_gpio;
}
ddata->hpd_gpio = gpio;
dssdev = &ddata->dssdev;
dssdev->ops.hdmi = &tpd_hdmi_ops;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_HDMI;
dssdev->output_type = OMAP_DISPLAY_TYPE_HDMI;
dssdev->owner = THIS_MODULE;
dssdev->port_num = 1;
in = ddata->in;
r = omapdss_register_output(dssdev);
if (r) {
dev_err(&pdev->dev, "Failed to register output\n");
goto err_reg;
}
return 0;
err_reg:
err_gpio:
omap_dss_put_device(ddata->in);
return r;
}