Beispiel #1
0
int diagfwd_disconnect(void)
{

	DIAGFWD_INFO("%s\n", __func__);
	driver->in_busy_1 = 1;
	driver->in_busy_2 = 1;
	driver->in_busy_qdsp_1 = 1;
	driver->in_busy_qdsp_2 = 1;
	driver->debug_flag = 1;
	if (driver->usb_connected)
		usb_diag_free_req(driver->legacy_ch);

#if defined(CONFIG_MACH_MECHA)
	driver->in_busy_mdm_1 = 1;
	driver->in_busy_mdm_2 = 1;
#endif
#if defined(CONFIG_ARCH_MSM8X60_LTE)
	if (diag_ch_sdio) {
		if (driver->legacy_ch && !IS_ERR(driver->legacy_ch))
			diagfwd_disconnect_sdio();
	} else {
		if (driver->usb_connected && driver->mdm_ch && !IS_ERR(driver->mdm_ch))
			diagfwd_disconnect_sdio();
	}
#endif
	driver->usb_connected = 0;
	/* TBD - notify and flow control SMD */
	return 0;
}
Beispiel #2
0
int diagfwd_disconnect(void)
{
	printk(KERN_DEBUG "diag: USB disconnected\n");
	driver->usb_connected = 0;
	driver->in_busy_1 = 1;
	driver->in_busy_2 = 1;
	driver->in_busy_qdsp_1 = 1;
	driver->in_busy_qdsp_2 = 1;
	driver->debug_flag = 1;
	usb_diag_free_req(driver->legacy_ch);
#ifdef CONFIG_DIAG_SDIO_PIPE
	if (machine_is_msm8x60_charm_surf() || machine_is_msm8x60_charm_ffa())
		if (driver->mdm_ch && !IS_ERR(driver->mdm_ch))
			diagfwd_disconnect_sdio();
#endif
	/* TBD - notify and flow control SMD */
	return 0;
}
int diagfwd_disconnect(void)
{
	printk(KERN_DEBUG "diag: USB disconnected\n");
	driver->usb_connected = 0;
	driver->debug_flag = 1;
	usb_diag_free_req(driver->legacy_ch);
	if (driver->logging_mode == USB_MODE) {
		driver->in_busy_1 = 1;
		driver->in_busy_2 = 1;
		driver->in_busy_qdsp_1 = 1;
		driver->in_busy_qdsp_2 = 1;
		driver->in_busy_wcnss = 1;
	}
#ifdef CONFIG_DIAG_SDIO_PIPE
	if (diag_support_mdm9k)
		if (driver->mdm_ch && !IS_ERR(driver->mdm_ch))
			diagfwd_disconnect_sdio();
#endif
	/* TBD - notify and flow control SMD */
	return 0;
}
Beispiel #4
0
int diagfwd_disconnect(void)
{
	int i;

	printk(KERN_DEBUG "diag: USB disconnected\n");
	driver->usb_connected = 0;
	driver->debug_flag = 1;
	usb_diag_free_req(driver->legacy_ch);
	if (driver->logging_mode == USB_MODE) {
		for (i = 0; i < NUM_SMD_DATA_CHANNELS; i++) {
			driver->smd_data[i].in_busy_1 = 1;
			driver->smd_data[i].in_busy_2 = 1;
		}
	}
#ifdef CONFIG_DIAG_SDIO_PIPE
	if (machine_is_msm8x60_fusion() || machine_is_msm8x60_fusn_ffa())
		if (driver->mdm_ch && !IS_ERR(driver->mdm_ch))
			diagfwd_disconnect_sdio();
#endif
	/* TBD - notify and flow control SMD */
	return 0;
}