C++ (Cpp) disable_port Beispiele

Beispiel #1

Datei: cpm-serial.c Projekt: 0-T-0/ps4-linux

static int cpm_serial_open(void)
{
	disable_port();

	out_8(&param->rfcr, 0x10);
	out_8(&param->tfcr, 0x10);
	out_be16(&param->mrblr, 1);
	out_be16(&param->maxidl, 0);
	out_be16(&param->brkec, 0);
	out_be16(&param->brkln, 0);
	out_be16(&param->brkcr, 0);

	rbdf = cbd_addr;
	rbdf->addr = (u8 *)rbdf - 1;
	rbdf->sc = 0xa000;
	rbdf->len = 1;

	tbdf = rbdf + 1;
	tbdf->addr = (u8 *)rbdf - 2;
	tbdf->sc = 0x2000;
	tbdf->len = 1;

	sync();
	out_be16(&param->rbase, cbd_offset);
	out_be16(&param->tbase, cbd_offset + sizeof(struct cpm_bd));

	do_cmd(CPM_CMD_INIT_RX_TX);

	enable_port();
	return 0;
}

Beispiel #2

Datei: cpm-serial.c Projekt: 0-T-0/ps4-linux

int cpm_console_init(void *devp, struct serial_console_data *scdp)
{
	void *vreg[2];
	u32 reg[2];
	int is_smc = 0, is_cpm2 = 0;
	void *parent, *muram;
	void *muram_addr;
	unsigned long muram_offset, muram_size;

	if (dt_is_compatible(devp, "fsl,cpm1-smc-uart")) {
		is_smc = 1;
	} else if (dt_is_compatible(devp, "fsl,cpm2-scc-uart")) {
		is_cpm2 = 1;
	} else if (dt_is_compatible(devp, "fsl,cpm2-smc-uart")) {
		is_cpm2 = 1;
		is_smc = 1;
	}

	if (is_smc) {
		enable_port = smc_enable_port;
		disable_port = smc_disable_port;
	} else {
		enable_port = scc_enable_port;
		disable_port = scc_disable_port;
	}

	if (is_cpm2)
		do_cmd = cpm2_cmd;
	else
		do_cmd = cpm1_cmd;

	if (getprop(devp, "fsl,cpm-command", &cpm_cmd, 4) < 4)
		return -1;

	if (dt_get_virtual_reg(devp, vreg, 2) < 2)
		return -1;

	if (is_smc)
		smc = vreg[0];
	else
		scc = vreg[0];

	param = vreg[1];

	parent = get_parent(devp);
	if (!parent)
		return -1;

	if (dt_get_virtual_reg(parent, &cpcr, 1) < 1)
		return -1;

	muram = finddevice("/soc/cpm/muram/data");
	if (!muram)
		return -1;

	/* For bootwrapper-compatible device trees, we assume that the first
	 * entry has at least 128 bytes, and that #address-cells/#data-cells
	 * is one for both parent and child.
	 */

	if (dt_get_virtual_reg(muram, &muram_addr, 1) < 1)
		return -1;

	if (getprop(muram, "reg", reg, 8) < 8)
		return -1;

	muram_offset = reg[0];
	muram_size = reg[1];

	/* Store the buffer descriptors at the end of the first muram chunk.
	 * For SMC ports on CPM2-based platforms, relocate the parameter RAM
	 * just before the buffer descriptors.
	 */

	cbd_offset = muram_offset + muram_size - 2 * sizeof(struct cpm_bd);

	if (is_cpm2 && is_smc) {
		u16 *smc_base = (u16 *)param;
		u16 pram_offset;

		pram_offset = cbd_offset - 64;
		pram_offset = _ALIGN_DOWN(pram_offset, 64);

		disable_port();
		out_be16(smc_base, pram_offset);
		param = muram_addr - muram_offset + pram_offset;
	}

	cbd_addr = muram_addr - muram_offset + cbd_offset;

	scdp->open = cpm_serial_open;
	scdp->putc = cpm_serial_putc;
	scdp->getc = cpm_serial_getc;
	scdp->tstc = cpm_serial_tstc;

	return 0;
}

Beispiel #3

Datei: lac.c Projekt: sevennothing/lros

/*---------------------------------------------------------------------------*/
extern void lac_disable_port(Lac_system *system, Port_no port_no)
{
    Lac_port *p;
    if (find_port(system, port_no, &p)) disable_port(p);
}