static switch_status_t channel_on_routing(switch_core_session_t *session)
{
switch_channel_t *channel = NULL;
private_t *tech_pvt = NULL;
const char *app, *arg;
channel = switch_core_session_get_channel(session);
assert(channel != NULL);
tech_pvt = switch_core_session_get_private(session);
assert(tech_pvt != NULL);
do_reset(tech_pvt);
switch_log_printf(SWITCH_CHANNEL_SESSION_LOG(session), SWITCH_LOG_DEBUG, "%s CHANNEL ROUTING\n", switch_channel_get_name(channel));
if (!switch_test_flag(tech_pvt, TFLAG_OUTBOUND) && (app = switch_channel_get_variable(channel, "loopback_app"))) {
switch_caller_extension_t *extension = NULL;
arg = switch_channel_get_variable(channel, "loopback_app_arg");
extension = switch_caller_extension_new(session, app, app);
switch_caller_extension_add_application(session, extension, "pre_answer", NULL);
switch_caller_extension_add_application(session, extension, app, arg);
switch_channel_set_caller_extension(channel, extension);
switch_channel_set_state(channel, CS_EXECUTE);
return SWITCH_STATUS_FALSE;
}
return SWITCH_STATUS_SUCCESS;
}
/*
* pseudo signature:
*
* int API_reset(void)
*/
static int API_reset(va_list ap)
{
do_reset(NULL, 0, 0, NULL);
/* NOT REACHED */
return 0;
}
static void compl_do_reset(struct usb_ep *ep, struct usb_request *req)
{
struct f_rockusb *f_rkusb = get_rkusb();
rkusb_set_reboot_flag(f_rkusb->reboot_flag);
do_reset(NULL, 0, 0, NULL);
}
int ee_do_command( u8 *Tx, int Tx_len, u8 *Rx, int Rx_len, int Send_skip ){
/* Execute this command string, including
giving reset and setting to idle after command
if Rx_len is set, we read out data from EEPROM */
int i;
E_DEBUG("Command, Tx_len %d, Rx_len %d\n", Tx_len, Rx_len );
if(do_reset()){
/* Failed! */
return(-EIO);
}
if(Send_skip)
/* Always send SKIP_ROM first to tell chip we are sending a command,
except when we read out rom data for chip */
write_byte(SKIP_ROM);
/* Always have Tx data */
for(i=0;i<Tx_len;i++){
write_byte(Tx[i]);
}
if(Rx_len){
for(i=0;i<Rx_len;i++){
Rx[i]=read_byte();
}
}
set_idle();
E_DEBUG("Command done\n");
return(0);
}
int fun_handler_cam2_back(void)
{
printf("Soft reset !!!!! \n");
set_to_peripheral_boot_mode();
do_reset(NULL, 0, 0, NULL);
return 1;
}
static ERL_NIF_TERM
evaluate_command(esqlite_command *cmd, esqlite_connection *conn)
{
switch(cmd->type) {
case cmd_open:
return do_open(cmd->env, conn, cmd->arg);
case cmd_exec:
return do_exec(cmd->env, conn, cmd->arg);
case cmd_changes:
return do_changes(cmd->env, conn, cmd->arg);
case cmd_prepare:
return do_prepare(cmd->env, conn, cmd->arg);
case cmd_step:
return do_step(cmd->env, conn->db, cmd->stmt);
case cmd_reset:
return do_reset(cmd->env, conn->db, cmd->stmt);
case cmd_bind:
return do_bind(cmd->env, conn->db, cmd->stmt, cmd->arg);
case cmd_column_names:
return do_column_names(cmd->env, cmd->stmt);
case cmd_close:
return do_close(cmd->env, conn, cmd->arg);
case cmd_insert:
return do_insert(cmd->env, conn, cmd->arg);
default:
return make_error_tuple(cmd->env, "invalid_command");
}
}
/**
* Set the boot bank to the alternate bank
*/
void cpld_set_altbank(u8 banksel)
{
struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
u8 reg11;
reg11 = in_8(&cpld_data->flhcsr);
switch (banksel) {
case 1:
out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
| CPLD_BANKSEL_EN | CPLD_SELECT_BANK1);
break;
case 2:
out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
| CPLD_BANKSEL_EN | CPLD_SELECT_BANK2);
break;
case 3:
out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
| CPLD_BANKSEL_EN | CPLD_SELECT_BANK3);
break;
case 4:
out_8(&cpld_data->flhcsr, (reg11 & CPLD_BANKSEL_MASK)
| CPLD_BANKSEL_EN | CPLD_SELECT_BANK4);
break;
default:
printf("Invalid value! [1-4]\n");
return;
}
udelay(100);
do_reset(NULL, 0, 0, NULL);
}
void hts_engine_impl::reset()
{
if(input->lbegin()!=input->lend())
do_reset();
output=0;
input=0;
rate=1.0;
}
void kernel_reset()
{
if(current_task->uid)
return;
kernel_shutdown();
kprintf("Rebooting system...\n");
do_reset();
}
void do_resetdialog()
{
changeFullScreen(0);
save_undo();
if (okcancel("Are you sure you want to reset?\nAny unsaved changes will be lost."))
{
resetfilename();
do_reset();
}
}
int do_tftpd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
const int press_times = 1;
int i = 0;
asus_gpio_init();
if (DETECT()) /* Reset button */
{
printf(" \n## Enter Rescue Mode ##\n");
printf(" \n3: System Boot system code via TFTP.\n");
setenv("autostart", "no");
/* Wait forever for an image */
if (NetLoop(TFTPD) < 0)
return 1;
}
else if (DETECT_WPS()) /* WPS button */
{
/* Make sure WPS button is pressed at least press_times * 0.01s. */
while (DETECT_WPS() && i++ < press_times) {
udelay(10000);
}
if (i >= press_times) {
while (DETECT_WPS()) {
udelay(90000);
i++;
if (i & 1)
LEDON();
else
LEDOFF();
}
LEDOFF();
asus_gpio_uninit();
reset_to_default();
do_reset (NULL, 0, 0, NULL);
}
}
else
{
if(check_trx(argc, argv))
{
printf(" \nEnter Recuse Mode for trx error\n");
printf(" \n3: System Boot system code via TFTP.\n");
if (NetLoop(TFTPD) < 0)
return 1;
}
printf(" \n3: System Boot system code via Flash.\n");
do_bootm(cmdtp, 0, argc, argv);
}
return 0;
}
static switch_status_t channel_on_reset(switch_core_session_t *session)
{
private_t *tech_pvt = (private_t *) switch_core_session_get_private(session);
switch_assert(tech_pvt != NULL);
do_reset(tech_pvt);
switch_log_printf(SWITCH_CHANNEL_SESSION_LOG(session), SWITCH_LOG_DEBUG, "%s RESET\n",
switch_channel_get_name(switch_core_session_get_channel(session)));
return SWITCH_STATUS_SUCCESS;
}
static void do_bootm_on_complete(struct usb_ep *ep, struct usb_request *req)
{
req->complete = NULL;
fastboot_shutdown();
printf("Booting kernel..\n");
//do_bootm(NULL, 0, 2, bootm_args);
/* This only happens if image is somehow faulty so we start over */
do_reset(NULL, 0, 0, NULL);
}
// FIXME: if rules_reset fails, exit
static int MAIL(void)
{
const response* resp;
msg2("MAIL ", arg.s);
do_reset();
if ((resp = parse_addr_arg()) == 0) {
if ((resp = handle_sender(&addr, ¶ms)) == 0)
resp = &resp_accepted_sender;
if (number_ok(resp)) {
saw_mail = 1;
}
}
return respond(resp);
}
void dr_inter::try_loading( const char* rFile, const char* aFile )
{
// full reset
do_reset();
if ( base_object.full_read( rFile, aFile ) )
{
rFileName = rFile;
aFileName = aFile;
fLoaded = true; // just indicate that file has been loaded
}
else fLoaded = false; // just indicate thate file has been loaded
}
int board_late_init(void)
{
pci_dev_t bdf;
ulong bootcount;
/*
* Check if the PEX switch is detected (somtimes its not available
* on the PCIe bus). In this case, try to recover by issuing a
* soft-reset or even a power-cycle, depending on the bootcounter
* value.
*/
bdf = pci_find_device(PCI_VENDOR_ID_PLX, 0x8619, 0);
if (bdf == -1) {
u8 i2c_buf[8];
int ret;
/* PEX switch not found! */
bootcount = bootcount_load();
printf("Failed to find PLX PEX-switch (bootcount=%ld)\n",
bootcount);
if (bootcount > PEX_SWITCH_NOT_FOUNT_LIMIT) {
printf("Issuing power-switch via uC!\n");
printf("Issuing power-switch via uC!\n");
i2c_set_bus_num(STM_I2C_BUS);
i2c_buf[0] = STM_I2C_ADDR << 1;
i2c_buf[1] = 0xc5; /* cmd */
i2c_buf[2] = 0x01; /* enable */
/* Delay before reboot */
i2c_buf[3] = REBOOT_DELAY & 0x00ff;
i2c_buf[4] = (REBOOT_DELAY & 0xff00) >> 8;
/* Delay before shutdown */
i2c_buf[5] = 0x00;
i2c_buf[6] = 0x00;
i2c_buf[7] = crc8(0x72, &i2c_buf[0], 7);
ret = i2c_write(STM_I2C_ADDR, 0, 0, &i2c_buf[1], 7);
if (ret) {
printf("I2C write error (ret=%d)\n", ret);
printf("Issuing soft-reset...\n");
/* default handling: SOFT reset */
do_reset(NULL, 0, 0, NULL);
}
/* Wait for power-cycle to occur... */
printf("Waiting for power-cycle via uC...\n");
while (1)
;
} else {
static int do_bootz(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
bootm_headers_t images;
if (bootz_start(cmdtp, flag, argc, argv, &images))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/* Stop the ethernet stack if NetConsole could have left it up */
eth_halt();
#endif
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
#ifdef CONFIG_SBOOT
bootm_sboot();
#endif
#ifdef CONFIG_SILENT_CONSOLE
fixup_silent_linux();
#endif
arch_preboot_os();
do_bootm_linux(0, argc, argv, &images);
#ifdef DEBUG
puts("\n## Control returned to monitor - resetting...\n");
#endif
do_reset(cmdtp, flag, argc, argv);
return 1;
}
static void erase_environment(void)
{
struct spi_flash *flash;
printf("Erasing environment..\n");
flash = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
if (!flash) {
printf("Erasing flash failed\n");
return;
}
spi_flash_erase(flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE);
spi_flash_free(flash);
do_reset(NULL, 0, 0, NULL);
}
void do_redo()
{
if (!gRedoStack.empty())
{
do_cancel();
File * state = new MemoryFile();
do_savebinary(state);
gUndoStack.push_back(state);
do_reset();
state = gRedoStack.back();
state->seek(0);
do_loadbinary(state);
gRedoStack.pop_back();
delete state;
}
}
/*
* Dump crash to file (typically FAT file on SD/MMC).
*/
static int do_checkcrash(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int rc = 0;
#if defined(ENG_VERSION)
Elf32_Ehdr *elfhdr_addr;
char *crash_env_val;
crash_env_val = getenv("crash_dump");
if ((crash_env_val != NULL) && strcmp(crash_env_val, "yes") == 0) {
rc = -1;
elfhdr_addr = get_elfhdr_addr();
if (elfhdr_addr != NULL)
rc = check_elfhdr(elfhdr_addr);
if (rc == 0) {
printf("crash dump elf header found."
" Dumping to card...\n");
rc = crashdump(elfhdr_addr);
if (rc != 0)
printf("checkcrash: "
"error writing dump from %x to %s\n",
(u32) elfhdr_addr, crash_filename);
}
else {
printf("crash dump elf header not found. Will try to create one"
" Dumping to card...\n");
rc = dump_regions_from_environment();
}
}
stop_mpcore_wdt();
/*
* For some reason we can't reboot into the linux kernel when coming
* from there using kexec. On the other hand, we can't reset through the
* PRCMU when we are here because of a watchdog reset.
* For now let's
* 1) Reset through PRCMU when coming from kexec
* 2) Continue booting when coming from a watchdog reset
*/
if (!reboot_at_crash())
setenv("bootdelay", "-1");
else
#endif
if (restarted())
do_reset();
return rc;
}
void cli_simple_loop(void)
{
static char lastcommand[CONFIG_SYS_CBSIZE] = { 0, };
int len;
int flag;
int rc = 1;
for (;;) {
if (rc >= 0) {
/* Saw enough of a valid command to
* restart the timeout.
*/
bootretry_reset_cmd_timeout();
}
len = cli_readline(CONFIG_SYS_PROMPT);
flag = 0; /* assume no special flags for now */
if (len > 0)
strcpy(lastcommand, console_buffer);
else if (len == 0)
flag |= CMD_FLAG_REPEAT;
#ifdef CONFIG_BOOT_RETRY_TIME
else if (len == -2) {
/* -2 means timed out, retry autoboot
*/
puts("\nTimed out waiting for command\n");
# ifdef CONFIG_RESET_TO_RETRY
/* Reinit board to run initialization code again */
do_reset(NULL, 0, 0, NULL);
# else
return; /* retry autoboot */
# endif
}
#endif
if (len == -1)
puts("<INTERRUPT>\n");
else
rc = run_command_repeatable(lastcommand, flag);
if (rc <= 0) {
/* invalid command or not repeatable, forget it */
lastcommand[0] = 0;
}
}
}
void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[],
bootm_headers_t *images)
{
/* First parameter is mapped to $r5 for kernel boot args */
void (*theKernel) (char *);
char *commandline = getenv ("bootargs");
ulong ep = 0;
/* find kernel entry point */
if (images->legacy_hdr_valid) {
ep = image_get_ep (images->legacy_hdr_os);
#if defined(CONFIG_FIT)
} else if (images->fit_uname_os) {
int ret = fit_image_get_entry (images->fit_hdr_os,
images->fit_noffset_os, &ep);
if (ret) {
puts ("Can't get entry point property!\n");
goto error;
}
#endif
} else {
puts ("Could not find kernel entry point!\n");
goto error;
}
theKernel = (void (*)(char *))ep;
show_boot_progress (15);
#ifdef DEBUG
printf ("## Transferring control to Linux (at address %08lx) ...\n",
(ulong) theKernel);
#endif
if (!images->autostart)
return ;
theKernel (commandline);
/* does not return */
return;
error:
if (images->autostart)
do_reset (cmdtp, flag, argc, argv);
return;
}
static int DATA(void)
{
const response* resp;
if (!saw_mail) return respond(&resp_no_mail);
if (!saw_rcpt) return respond(&resp_no_rcpt);
if (!response_ok(resp = handle_data_start()))
return respond(resp);
if (!respond(&resp_data_ok)) return 0;
if (!copy_body()) {
do_reset();
return 0;
}
if ((resp = handle_message_end()) == 0)
resp = &resp_accepted_message;
return respond(resp);
}
static void EFIAPI efi_reset_system(enum efi_reset_type reset_type,
efi_status_t reset_status,
unsigned long data_size, void *reset_data)
{
EFI_ENTRY("%d %lx %lx %p", reset_type, reset_status, data_size,
reset_data);
switch (reset_type) {
case EFI_RESET_COLD:
case EFI_RESET_WARM:
do_reset(NULL, 0, 0, NULL);
break;
case EFI_RESET_SHUTDOWN:
/* We don't have anything to map this to */
break;
}
EFI_EXIT(EFI_SUCCESS);
}
/**
*** Analyse the processor(s) specified. This is not actually used at
*** present, but I may have to put it in again at a later stage.
*** Currently it is just a copy of driver_Reset().
**/
static void driver_Analyse(NetworkDCB *device, DriverRequest *request)
{ RmHardwareFacility *hardware;
int i;
int state;
RmProcessor Processor;
hardware = device->HardwareFacility;
request->FnRc = do_reset(device);
if (request->FnRc eq Err_Null)
for (i = 0; i < hardware->NumberProcessors; i++)
{ Processor = hardware->Processors[i];
if ((Processor eq (RmProcessor) device->RootProcessor) ||
(Processor eq (RmProcessor) device->ControlProc))
continue;
state = RmGetProcessorState(Processor);
state |= RmS_Reset;
(void) RmSetProcessorState(Processor, state);
}
}
void show_boot_progress (int status)
{
int i,j;
if(status > 0) {
last_boot_progress = status;
} else {
/*
* If a specific failure code is given, flash this code
* else just use the last success code we've seen
*/
if(status < -1)
last_boot_progress = -status;
/*
* Flash this code 5 times
*/
for(j=0; j<5; j++) {
/*
* Houston, we have a problem.
* Blink the last OK status which indicates where things failed.
*/
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
flash_code(last_boot_progress, 5, 3);
/*
* Delay 5 seconds between repetitions,
* with the fault LED blinking
*/
for(i=0; i<5; i++) {
status_led_set(STATUS_LED_RED, STATUS_LED_OFF);
udelay(500000);
status_led_set(STATUS_LED_RED, STATUS_LED_ON);
udelay(500000);
}
}
/*
* Reset the board to retry initialization.
*/
do_reset (NULL, 0, 0, NULL);
}
}
static ERL_NIF_TERM
evaluate_command(esqlite_command *cmd, esqlite_connection *conn)
{
esqlite_statement *stmt = NULL;
if(cmd->stmt) {
if(!enif_get_resource(cmd->env, cmd->stmt, esqlite_statement_type, (void **) &stmt)) {
return make_error_tuple(cmd->env, "invalid_statement");
}
}
switch(cmd->type) {
case cmd_open:
return do_open(cmd->env, conn, cmd->arg);
case cmd_update_hook_set:
return do_set_update_hook(cmd->env, conn, cmd->arg);
case cmd_exec:
return do_exec(cmd->env, conn, cmd->arg);
case cmd_changes:
return do_changes(cmd->env, conn, cmd->arg);
case cmd_prepare:
return do_prepare(cmd->env, conn, cmd->arg);
case cmd_multi_step:
return do_multi_step(cmd->env, conn->db, stmt->statement, cmd->arg);
case cmd_reset:
return do_reset(cmd->env, conn->db, stmt->statement);
case cmd_bind:
return do_bind(cmd->env, conn->db, stmt->statement, cmd->arg);
case cmd_column_names:
return do_column_names(cmd->env, stmt->statement);
case cmd_column_types:
return do_column_types(cmd->env, stmt->statement);
case cmd_close:
return do_close(cmd->env, conn, cmd->arg);
case cmd_insert:
return do_insert(cmd->env, conn, cmd->arg);
case cmd_get_autocommit:
return do_get_autocommit(cmd->env, conn);
default:
return make_error_tuple(cmd->env, "invalid_command");
}
}
static void
notify_parent(void)
{
pid_t ppid;
union sigval signal_value;
memset(&signal_value, 0, sizeof(signal_value));
ppid = getppid();
if (ppid == 1) {
/* Our parent died unexpectedly. Triggering
* self-fence. */
cl_log(LOG_WARNING, "Our parent is dead.");
do_reset();
}
switch (pcmk_healthy) {
case pcmk_health_pending:
case pcmk_health_shutdown:
case pcmk_health_transient:
DBGLOG(LOG_INFO, "Not notifying parent: state transient (%d)", pcmk_healthy);
break;
case pcmk_health_unknown:
case pcmk_health_unclean:
case pcmk_health_noquorum:
DBGLOG(LOG_WARNING, "Notifying parent: UNHEALTHY (%d)", pcmk_healthy);
sigqueue(ppid, SIG_PCMK_UNHEALTHY, signal_value);
break;
case pcmk_health_online:
DBGLOG(LOG_INFO, "Notifying parent: healthy");
sigqueue(ppid, SIG_LIVENESS, signal_value);
break;
default:
DBGLOG(LOG_WARNING, "Notifying parent: UNHEALTHY %d", pcmk_healthy);
sigqueue(ppid, SIG_PCMK_UNHEALTHY, signal_value);
break;
}
}
static int do_boot_mode(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[])
{
const struct boot_mode *p;
int reset_requested = 1;
if (argc < 2)
return CMD_RET_USAGE;
p = search_modes(argv[1]);
if (!p)
return CMD_RET_USAGE;
if (argc == 3) {
if (strcmp(argv[2], "noreset"))
return CMD_RET_USAGE;
reset_requested = 0;
}
boot_mode_apply(p->cfg_val);
if (reset_requested && p->cfg_val)
do_reset(NULL, 0, 0, NULL);
return 0;
}
void do_bootm_linux(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[],
bootm_headers_t *images)
{
ulong ep = 0;
/* find kernel entry point */
if (images->legacy_hdr_valid) {
ep = image_get_ep (images->legacy_hdr_os);
#if defined(CONFIG_FIT)
} else if (images->fit_uname_os) {
int ret = fit_image_get_entry (images->fit_hdr_os,
images->fit_noffset_os, &ep);
if (ret) {
puts ("Can't get entry point property!\n");
goto error;
}
#endif
} else {
puts ("Could not find kernel entry point!\n");
goto error;
}
void (*kernel)(void) = (void (*)(void))ep;
if (!images->autostart)
return ;
/* For now we assume the Microtronix linux ... which only
* needs to be called ;-)
*/
kernel ();
/* does not return */
return;
error:
if (images->autostart)
do_reset (cmdtp, flag, argc, argv);
return;
}
