void
vintr(int i)
{
(void)i;
signal(SIGINT, vintr);
if (vcatch)
onintr(0);
ungetkey(ATTN);
draino();
}
/*
* Stop -nl mode.
*/
void
pstop(void)
{
if (inopen)
return;
phadnl = 0;
linp = linb;
draino();
normal(normf);
pfast &= ~1;
}
/*
* An interrupt occurred. Drain any output which
* is still in the output buffering pipeline.
* Catch interrupts again. Unless we are in visual
* reset the output state (out of -nl mode, e.g).
* Then like a normal error (with the \n before Interrupt
* suppressed in visual mode).
*/
void
onintr(int i)
{
char *s = "\nInterrupt";
(void)i;
#ifdef V6
signal(SIGINT, onintr);
#else
signal(SIGINT, inopen ? vintr : onintr);
#endif
draino();
if (!inopen) {
pstop();
setlastchar('\n');
#ifndef V6
}
#else
} else
/*
* Main procedure. Process arguments and then
* transfer control to the main command processing loop
* in the routine commands. We are entered as either "ex", "edit" or "vi"
* and the distinction is made here. Actually, we are "vi" if
* there is a 'v' in our name, and "edit" if there is a 'd' in our
* name. For edit we just diddle options; for vi we actually
* force an early visual command, setting the external initev so
* the q command in visual doesn't give command mode.
*/
int
main(int ac, char **av)
{
#if 0
char *erpath = EXSTRINGS;
#endif
register char *cp;
register int c;
bool recov = 0;
bool ivis = any('v', av[0]);
bool itag = 0;
bool fast = 0;
#ifdef TRACE
register char *tracef;
#endif
/*
* Immediately grab the tty modes so that we wont
* get messed up if an interrupt comes in quickly.
*/
gTTY(1);
normf = tty;
#if 0
/*
* For debugging take files out of . if name is a.out.
* If a 'd' in our name, then set options for edit.
*/
if (av[0][0] == 'a')
erpath += 9;
#endif
if (ivis) {
options[MAGIC].odefault = value(MAGIC) = 0;
options[BEAUTIFY].odefault = value(BEAUTIFY) = 1;
} else if (any('d', av[0])) {
value(OPEN) = 0;
value(REPORT) = 1;
value(MAGIC) = 0;
}
/*
* Open the error message file.
*/
draino();
#if 0
erfile = open(erpath, 0);
if (erfile < 0) {
flush();
exit(1);
}
#endif
pstop();
/*
* Initialize interrupt handling.
*/
oldhup = signal(SIGHUP, SIG_IGN);
if (oldhup == SIG_DFL)
signal(SIGHUP, onhup);
oldquit = signal(SIGQUIT, SIG_IGN);
ruptible = signal(SIGINT, SIG_IGN) == SIG_DFL;
if (signal(SIGTERM, SIG_IGN) == SIG_DFL)
signal(SIGTERM, onhup);
/*
* Initialize end of core pointers.
* Normally we avoid breaking back to fendcore after each
* file since this can be expensive (much core-core copying).
* If your system can scatter load processes you could do
* this as ed does, saving a little core, but it will probably
* not often make much difference.
*/
#ifdef UNIX_SBRK
fendcore = (line *) sbrk(0);
endcore = fendcore - 2;
#else
# define LINELIMIT 0x8000
fendcore = malloc(LINELIMIT * sizeof(line *));
endcore = fendcore + LINELIMIT - 1;
#endif
/*
* Process flag arguments.
*/
ac--, av++;
while (ac && av[0][0] == '-') {
c = av[0][1];
if (c == 0) {
hush = 1;
value(AUTOPRINT) = 0;
fast++;
} else switch (c) {
#ifdef TRACE
case 'T':
if (av[0][2] == 0)
tracef = "trace";
else {
tracef = tttrace;
tracef[8] = av[0][2];
if (tracef[8])
tracef[9] = av[0][3];
else
tracef[9] = 0;
}
trace = fopen(tracef, "w");
if (trace == NULL)
ex_printf("Trace create error\n");
setbuf(trace, tracbuf);
break;
#endif
#ifdef LISP
case 'l':
value(LISP) = 1;
value(SHOWMATCH) = 1;
break;
#endif
case 'r':
recov++;
break;
case 't':
if (ac > 1 && av[1][0] != '-') {
ac--, av++;
itag = 1;
/* BUG: should check for too long tag. */
CP(lasttag, av[0]);
}
break;
case 'v':
globp = "";
ivis = 1;
break;
default:
smerror("Unknown option %s\n", av[0]);
break;
}
ac--, av++;
}
if (ac && av[0][0] == '+') {
firstln = getn(av[0] + 1);
if (firstln == 0)
firstln = 20000;
ac--, av++;
}
/*
* If we are doing a recover and no filename
* was given, then execute an exrecover command with
* the -r option to type out the list of saved file names.
* Otherwise set the remembered file name to the first argument
* file name so the "recover" initial command will find it.
*/
if (recov) {
if (ac == 0) {
die++;
setrupt();
execl(EXRECOVER, "exrecover", "-r", NULL);
filioerr(EXRECOVER);
exit(1);
}
CP(savedfile, *av);
av++, ac--;
}
/*
* Initialize the argument list.
*/
argv0 = av;
argc0 = ac;
args0 = av[0];
erewind();
/*
* Initialize a temporary file (buffer) and
* set up terminal environment. Read user startup commands.
*/
init();
if (setexit() == 0) {
setrupt();
intty = isatty(0);
if (fast || !intty)
setterm("dumb");
else {
gettmode();
if ((cp = getenv("TERM")) != 0)
setterm(cp);
if ((cp = getenv("HOME")) != 0)
source(strcat(strcpy(genbuf, cp), "/.exrc"), 1);
}
}
/*
* Initial processing. Handle tag, recover, and file argument
* implied next commands. If going in as 'vi', then don't do
* anything, just set initev so we will do it later (from within
* visual).
*/
if (setexit() == 0) {
if (recov)
globp = "recover";
else if (itag)
globp = ivis ? "tag" : "tag|p";
else if (argc)
globp = "next";
if (ivis)
initev = globp;
else if (globp) {
inglobal = 1;
commands(1, 1);
inglobal = 0;
}
}
/*
* Vi command... go into visual.
* Strange... everything in vi usually happens
* before we ever "start".
*/
if (ivis) {
/*
* Don't have to be upward compatible with stupidity
* of starting editing at line $.
*/
if (dol > zero)
dot = one;
globp = "visual";
if (setexit() == 0)
commands(1, 1);
}
/*
* Clear out trash in state accumulated by startup,
* and then do the main command loop for a normal edit.
* If you quit out of a 'vi' command by doing Q or ^\,
* you also fall through to here.
*/
ungetchar(0);
globp = 0;
initev = 0;
setlastchar('\n');
setexit();
commands(0, 0);
cleanup(1);
return 0;
}
/*
* Main procedure. Process arguments and then
* transfer control to the main command processing loop
* in the routine commands. We are entered as either "ex", "edit", "vi"
* or "view" and the distinction is made here. Actually, we are "vi" if
* there is a 'v' in our name, "view" is there is a 'w', and "edit" if
* there is a 'd' in our name. For edit we just diddle options;
* for vi we actually force an early visual command.
*/
int
main(int ac, char **av)
{
#ifndef VMUNIX
char *erpath = EXSTRINGS;
#endif
register char *cp;
register int c;
bool recov = 0;
bool ivis;
bool itag = 0;
bool fast = 0;
#ifdef TRACE
register char *tracef;
#endif
/*
* Immediately grab the tty modes so that we wont
* get messed up if an interrupt comes in quickly.
*/
gTTY(1);
#ifndef USG3TTY
normf = tty.sg_flags;
#else
normf = tty;
#endif
ppid = getpid();
/*
* Defend against d's, v's, w's, and a's in directories of
* path leading to our true name.
*/
av[0] = tailpath(av[0]);
/*
* Figure out how we were invoked: ex, edit, vi, view.
*/
ivis = any('v', av[0]); /* "vi" */
if (any('w', av[0])) /* "view" */
value(READONLY) = 1;
if (any('d', av[0])) { /* "edit" */
value(OPEN) = 0;
value(REPORT) = 1;
value(MAGIC) = 0;
}
#ifndef VMUNIX
/*
* For debugging take files out of . if name is a.out.
*/
if (av[0][0] == 'a')
erpath = tailpath(erpath);
#endif
/*
* Open the error message file.
*/
draino();
#ifndef VMUNIX
erfile = open(erpath+4, O_RDONLY);
if (erfile < 0) {
erfile = open(erpath, O_RDONLY);
}
#endif
pstop();
/*
* Initialize interrupt handling.
*/
oldhup = signal(SIGHUP, SIG_IGN);
if (oldhup == SIG_DFL)
signal(SIGHUP, onhup);
oldquit = signal(SIGQUIT, SIG_IGN);
ruptible = signal(SIGINT, SIG_IGN) == SIG_DFL;
if (signal(SIGTERM, SIG_IGN) == SIG_DFL)
signal(SIGTERM, onhup);
#ifdef SIGEMT
if (signal(SIGEMT, SIG_IGN) == SIG_DFL)
signal(SIGEMT, onemt);
#endif
/*
* Initialize end of core pointers.
* Normally we avoid breaking back to fendcore after each
* file since this can be expensive (much core-core copying).
* If your system can scatter load processes you could do
* this as ed does, saving a little core, but it will probably
* not often make much difference.
*/
#ifdef UNIX_SBRK
fendcore = (line *) sbrk(0);
endcore = fendcore - 2;
#else
# define LINELIMIT 0x8000
fendcore = malloc(LINELIMIT * sizeof(line *));
endcore = fendcore + LINELIMIT - 1;
#endif
/*
* Process flag arguments.
*/
ac--, av++;
while (ac && av[0][0] == '-') {
c = av[0][1];
if (c == 0) {
hush = 1;
value(AUTOPRINT) = 0;
fast++;
} else switch (c) {
case 'R':
value(READONLY) = 1;
break;
#ifdef TRACE
case 'T':
if (av[0][2] == 0)
tracef = "trace";
else {
tracef = tttrace;
tracef[8] = av[0][2];
if (tracef[8])
tracef[9] = av[0][3];
else
tracef[9] = 0;
}
trace = fopen(tracef, "w");
if (trace == NULL)
ex_printf("Trace create error\n");
setbuf(trace, tracbuf);
break;
#endif
#ifdef LISPCODE
case 'l':
value(LISP) = 1;
value(SHOWMATCH) = 1;
break;
#endif
case 'r':
recov++;
break;
case 't':
if (ac > 1 && av[1][0] != '-') {
ac--, av++;
itag = 1;
/* BUG: should check for too long tag. */
CP(lasttag, av[0]);
}
break;
case 'v':
ivis = 1;
break;
case 'w':
defwind = 0;
if (av[0][2] == 0) defwind = 3;
else for (cp = &av[0][2]; isdigit((int)*cp); cp++)
defwind = 10*defwind + *cp - '0';
break;
#ifdef CRYPT
case 'x':
/* -x: encrypted mode */
xflag = 1;
break;
#endif
default:
smerror("Unknown option %s\n", av[0]);
break;
}
ac--, av++;
}
#ifdef SIGTSTP
if (!hush && signal(SIGTSTP, SIG_IGN) == SIG_DFL)
signal(SIGTSTP, onsusp), dosusp++;
#endif
if (ac && av[0][0] == '+') {
firstpat = &av[0][1];
ac--, av++;
}
#ifdef CRYPT
if(xflag){
key = getpass(KEYPROMPT);
kflag = crinit(key, perm);
}
#endif
/*
* If we are doing a recover and no filename
* was given, then execute an exrecover command with
* the -r option to type out the list of saved file names.
* Otherwise set the remembered file name to the first argument
* file name so the "recover" initial command will find it.
*/
if (recov) {
if (ac == 0) {
ppid = 0;
setrupt();
execl(EXRECOVER, "exrecover", "-r", NULL);
filioerr(EXRECOVER);
ex_exit(1);
}
CP(savedfile, *av);
av++, ac--;
}
/*
* Initialize the argument list.
*/
argv0 = av;
argc0 = ac;
args0 = av[0];
erewind();
/*
* Initialize a temporary file (buffer) and
* set up terminal environment. Read user startup commands.
*/
if (setexit() == 0) {
setrupt();
intty = isatty(0);
value(PROMPT) = intty;
if ((cp = getenv("SHELL")))
CP(shell, cp);
if (fast || !intty)
setterm("dumb");
else {
gettmode();
if ((cp = getenv("TERM")) != 0 && *cp)
setterm(cp);
}
}
if (setexit() == 0 && !fast && intty) {
if ((globp = getenv("EXINIT")) && *globp)
commands(1,1);
else {
globp = 0;
if ((cp = getenv("HOME")) != 0 && *cp)
source(strcat(strcpy(genbuf, cp), "/.exrc"), 1);
}
}
init(); /* moved after prev 2 chunks to fix directory option */
/*
* Initial processing. Handle tag, recover, and file argument
* implied next commands. If going in as 'vi', then don't do
* anything, just set initev so we will do it later (from within
* visual).
*/
if (setexit() == 0) {
if (recov)
globp = "recover";
else if (itag)
globp = ivis ? "tag" : "tag|p";
else if (argc)
globp = "next";
if (ivis)
initev = globp;
else if (globp) {
inglobal = 1;
commands(1, 1);
inglobal = 0;
}
}
/*
* Vi command... go into visual.
* Strange... everything in vi usually happens
* before we ever "start".
*/
if (ivis) {
/*
* Don't have to be upward compatible with stupidity
* of starting editing at line $.
*/
if (dol > zero)
dot = one;
globp = "visual";
if (setexit() == 0)
commands(1, 1);
}
/*
* Clear out trash in state accumulated by startup,
* and then do the main command loop for a normal edit.
* If you quit out of a 'vi' command by doing Q or ^\,
* you also fall through to here.
*/
seenprompt = 1;
ungetchar(0);
globp = 0;
initev = 0;
setlastchar('\n');
setexit();
commands(0, 0);
cleanup(1);
return 0;
}
