/**
* This function completes the ep0 control transfer.
*/
static int32_t ep0_complete_request( pcd_struct_t * pcd)
{
deptsiz0_data_t deptsiz;
int is_last = 0;
dwc_ep_t* ep = &g_dwc_eps[0];
DBG("ep0_complete_request()\n");
if (pcd->ep0state == EP0_STATUS)
{
is_last = 1;
}
else if (ep->xfer_len == 0)
{
ep->xfer_len = 0;
ep->xfer_count = 0;
ep->sent_zlp = 1;
dwc_otg_ep_start_transfer( ep );
return 1;
}
else if (ep->is_in)
{
deptsiz.d32 = dwc_read_reg32(DWC_REG_IN_EP_TSIZE(0) );
if (deptsiz.b.xfersize == 0) {
/* Is a Zero Len Packet needed? */
do_setup_out_status_phase(pcd);
}
}
else {
/* ep0-OUT */
do_setup_in_status_phase(pcd);
}
/* Complete the request */
if (is_last) {
ep->start_xfer_buff = 0;
ep->xfer_buff = 0;
ep->xfer_len = 0;
return 1;
}
return 0;
}
/**
* This function starts the Zero-Length Packet for the IN status phase
* of a 2 stage control transfer.
*/
static void do_setup_in_status_phase( pcd_struct_t *_pcd)
{
dwc_ep_t *ep0 = &g_dwc_eps[0];
if (_pcd->ep0state == EP0_STALL){
return;
}
_pcd->ep0state = EP0_STATUS;
DBG( "EP0 IN ZLP\n");
ep0->xfer_len = 0;
ep0->xfer_count = 0;
ep0->is_in = 1;
dwc_otg_ep_start_transfer( ep0 );
/* Prepare for more SETUP Packets */
ep0_out_start();
}
/**
* This function is used to submit an I/O Request to an EP.
*
* - When the request completes the request's completion callback
* is called to return the request to the driver.
* - An EP, except control EPs, may have multiple requests
* pending.
* - Once submitted the request cannot be examined or modified.
* - Each request is turned into one or more packets.
* - A BULK EP can queue any amount of data; the transfer is
* packetized.
* - Zero length Packets are specified with the request 'zero'
* flag.
*/
static int dwc_otg_pcd_ep_queue(struct usb_ep *_ep,
struct usb_request *_req, int _gfp_flags)
{
int prevented = 0;
dwc_otg_pcd_request_t *req;
dwc_otg_pcd_ep_t *ep;
dwc_otg_pcd_t *pcd;
unsigned long flags = 0;
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
__func__, _ep, _req, _gfp_flags);
req = container_of(_req, dwc_otg_pcd_request_t, req);
if (!_req || !_req->complete || !_req->buf ||
!list_empty(&req->queue))
{
if( !_req ) printk("bad _req\n");
if( !_req->complete ) printk("bad _req->complete\n");
if( !_req->buf ) printk("bad _req->buf\n");
if( !list_empty(&req->queue) ) printk("bad list_empty\n");
DWC_WARN("%s, bad params\n", __func__);
return -EINVAL;
}
ep = container_of(_ep, dwc_otg_pcd_ep_t, ep);
if (!_ep || (!ep->desc && ep->dwc_ep.num != 0))
{
DWC_WARN("%s, bad ep\n", __func__);
return -EINVAL;
}
pcd = ep->pcd;
//cathy, if suspended, drop request
if ( (GET_CORE_IF(pcd)->dev_if->suspended == 1) && (ep->dwc_ep.num != 0) )
{
DWC_DEBUGPL(DBG_PCDV,"%s, epnum = %d, drop request\n", __func__, ep->dwc_ep.num);
return -ESHUTDOWN;
}
if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN)
{
DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
DWC_WARN("%s, bogus device state\n", __func__);
return -ESHUTDOWN;
}
DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
_ep->name, _req, _req->length, _req->buf);
if (!GET_CORE_IF(pcd)->core_params->opt)
{
if (ep->dwc_ep.num != 0)
{
DWC_ERROR("%s queue req %p, len %d buf %p\n",
_ep->name, _req, _req->length, _req->buf);
}
}
SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
#if defined(DEBUG) & defined(VERBOSE)
dump_msg(_req->buf, _req->length);
#endif
_req->status = -EINPROGRESS;
_req->actual = 0;
/*
* For EP0 IN without premature status, zlp is required?
*/
if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in)
{
DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", _ep->name);
//_req->zero = 1;
}
/* Start the transfer */
if (list_empty(&ep->queue) && !ep->stopped)
{
/* EP0 Transfer? */
if (ep->dwc_ep.num == 0)
{
switch (pcd->ep0state)
{
case EP0_IN_DATA_PHASE:
DWC_DEBUGPL(DBG_PCD,
"%s ep0: EP0_IN_DATA_PHASE\n",
__func__);
break;
case EP0_OUT_DATA_PHASE:
DWC_DEBUGPL(DBG_PCD,
"%s ep0: EP0_OUT_DATA_PHASE\n",
__func__);
if (pcd->request_config)
{
/* Complete STATUS PHASE */
ep->dwc_ep.is_in = 1;
pcd->ep0state = EP0_STATUS;
}
break;
default:
DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
pcd->ep0state);
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
return -EL2HLT;
}
ep->dwc_ep.dma_addr = (u32)_req->buf & ~Uncache_Mask; //_req->dma; //cathy
ep->dwc_ep.start_xfer_buff = _req->buf;
ep->dwc_ep.xfer_buff = _req->buf;
ep->dwc_ep.xfer_len = _req->length;
ep->dwc_ep.xfer_count = 0;
ep->dwc_ep.sent_zlp = 0;
ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
dwc_otg_ep0_start_transfer( GET_CORE_IF(pcd),
&ep->dwc_ep );
}
else
{
/* Setup and start the Transfer */
ep->dwc_ep.dma_addr = (u32)_req->buf & ~Uncache_Mask; //_req->dma; //cathy
//ep->dwc_ep.dma_addr = _req->dma;
ep->dwc_ep.start_xfer_buff = _req->buf;
ep->dwc_ep.xfer_buff = _req->buf;
ep->dwc_ep.xfer_len = _req->length;
ep->dwc_ep.xfer_count = 0;
ep->dwc_ep.sent_zlp = 0;
ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
dwc_otg_ep_start_transfer( GET_CORE_IF(pcd),
&ep->dwc_ep );
}
}
if ((req != 0) || prevented)
{
++pcd->request_pending;
list_add_tail(&req->queue, &ep->queue);
//cathy
#if 0
if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable))
{
/** @todo NGS Create a function for this. */
diepmsk_data_t diepmsk = { .d32 = 0};
diepmsk.b.intktxfemp = 1;
dwc_modify_reg32( &GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32 );
}
#endif
}
