static inline void estimate_period_skew(void) {
// Estimate clock skew over a period only if the reference time has been updated.
if (GLOSSY_IS_SYNCED()) {
// Estimate clock skew based on previous reference time and the Glossy period.
period_skew = get_t_ref_l() - (t_ref_l_old + (rtimer_clock_t)GLOSSY_PERIOD);
// Update old reference time with the newer one.
t_ref_l_old = get_t_ref_l();
// If Glossy is still bootstrapping, count the number of consecutive updates of the reference time.
if (GLOSSY_IS_BOOTSTRAPPING()) {
// Increment number of consecutive updates of the reference time.
skew_estimated++;
// Check if Glossy has exited from bootstrapping.
if (!GLOSSY_IS_BOOTSTRAPPING()) {
// Glossy has exited from bootstrapping.
leds_off(LEDS_RED);
// Initialize Energest values.
energest_init();
#if GLOSSY_DEBUG
high_T_irq = 0;
bad_crc = 0;
bad_length = 0;
bad_header = 0;
#endif /* GLOSSY_DEBUG */
}
}
}
}
void SimluateRun(CuTest* tc)
{
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
window_init(0xff);
autostart_start(autostart_processes);
process_start(&event_process, NULL);
while(run) {
int r;
do {
/* Reset watchdog. */
r = process_run();
} while(r > 0);
#if 0
int n = etimer_next_expiration_time();
if (n > 0)
{
int p = n - clock_time();
if (p > 0)
nanosleep(p);
}
else
{
nanosleep(1000);
}
#endif
etimer_request_poll();
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initialize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
// Led initialization
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s\r\n",boardDescription->name);
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
/* rtimer and ctimer should be initialized before radio duty cycling layers*/
rtimer_init();
/* etimer_process should be initialized before ctimer */
process_start(&etimer_process, NULL);
ctimer_init();
rtimer_init();
netstack_init();
set_rime_addr();
printf("%s %s, channel check rate %lu Hz\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()));
printf("802.15.4 PAN ID 0x%x, EUI-%d:",
IEEE802154_CONF_PANID, UIP_CONF_LL_802154?64:16);
uip_debug_lladdr_print(&rimeaddr_node_addr);
printf(", radio channel %u\n", RF_CHANNEL);
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
while(1){
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
//watchdog_stop();
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE,0);
/* We are awake. */
//watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
#endif /* WITH_UIP */
leds_on(LEDS_GREEN);
ds2411_init();
/* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
cannot be odd. */
ds2411_id[2] &= 0xfe;
leds_on(LEDS_BLUE);
xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_restore();
random_init(ds2411_id[0] + node_id);
leds_off(LEDS_BLUE);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
/*
* Initialize light and humidity/temp sensors.
*/
sensors_light_init();
battery_sensor.activate();
sht11_init();
ctimer_init();
cc2420_init();
cc2420_set_pan_addr(IEEE802154_PANID, 0 /*XXX*/, ds2411_id);
cc2420_set_channel(RF_CHANNEL);
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
set_rime_addr();
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);
#if WITH_UIP6
memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr));
sicslowpan_init(sicslowmac_init(&cc2420_driver));
process_start(&tcpip_process, NULL);
printf(" %s channel %u\n", sicslowmac_driver.name, RF_CHANNEL);
#if UIP_CONF_ROUTER
rime_init(rime_udp_init(NULL));
uip_router_register(&rimeroute);
#endif /* UIP_CONF_ROUTER */
#else /* WITH_UIP6 */
rime_init(MAC_DRIVER.init(&cc2420_driver));
printf(" %s channel %u\n", rime_mac->name, RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP && !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#if PROFILE_CONF_ON
profile_init();
#endif /* PROFILE_CONF_ON */
leds_off(LEDS_GREEN);
#if WITH_FTSP
ftsp_init();
#endif /* WITH_FTSP */
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172,16,
rimeaddr_node_addr.u8[0],rimeaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
printf("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* WITH_UIP */
button_sensor.activate();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
print_processes(autostart_processes);
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
watchdog_start();
/* watchdog_stop();*/
while(1) {
int r;
#if PROFILE_CONF_ON
profile_episode_start();
#endif /* PROFILE_CONF_ON */
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
#if PROFILE_CONF_ON
profile_episode_end();
#endif /* PROFILE_CONF_ON */
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if (timer_expired(&mgt_timer)) {
timer_reset(&mgt_timer);
msp430_sync_dco();
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
return 0;
}
int
main(int argc, char *argv[])
{
node_id_restore();
/* init system: clocks, board etc */
system_init();
sio2host_init();
leds_init();
leds_on(LEDS_ALL);
system_interrupt_enable_global();
flash_init();
delay_init();
/* Initialize Contiki and our processes. */
#ifdef LOW_POWER_MODE
configure_tc3();
#else
clock_init();
#endif
process_init();
ctimer_init();
rtimer_init();
process_start(&etimer_process, NULL);
/* Set MAC address and node ID */
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
node_id_burn(node_id);
#endif /* BURN_NODEID */
#else/* NODE_ID */
#endif /* NODE_ID */
printf("\r\n\n\n\n Starting the SmartConnect-6LoWPAN \r\n Platform : Atmel IoT device \r\n");
print_reset_causes();
netstack_init();
#if BOARD == SAMR21_XPLAINED_PRO
eui64 = edbg_eui_read_eui64();
SetIEEEAddr(eui64);
#else
SetIEEEAddr(node_mac);
#endif
set_link_addr();
rf_set_channel(RF_CHANNEL);
printf("\r\n Configured RF channel: %d\r\n", rf_get_channel());
leds_off(LEDS_ALL);
process_start(&sensors_process, NULL);
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
if(node_id > 0) {
printf(" Node id %u.\r\n", node_id);
} else {
printf(" Node id not set.\r\n");
}
/* Setup nullmac-like MAC for 802.15.4 */
#if SAMD
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
#else
memcpy(&uip_lladdr.addr, eui64, sizeof(uip_lladdr.addr));
#endif
queuebuf_init();
printf(" %s %lu %d\r\n",
NETSTACK_RDC.name,
(uint32_t) (CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval())),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf(" IPv6 Address: ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\r\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
{
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\r\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
print_processes(autostart_processes);
/* set up AES key */
#if ((THSQ_CONF_NETSTACK) & THSQ_CONF_AES)
#ifndef NETSTACK_AES_KEY
#error Please define NETSTACK_AES_KEY!
#endif /* NETSTACK_AES_KEY */
{
const uint8_t key[] = NETSTACK_AES_KEY;
netstack_aes_set_key(key);
}
printf("AES encryption is enabled\n");
#else /* ((THSQ_CONF_NETSTACK) & THSQ_CONF_AES) */
printf("\r\n Warning: AES encryption is disabled\n");
#endif /* ((THSQ_CONF_NETSTACK) & THSQ_CONF_AES) */
#ifdef ENABLE_LEDCTRL
ledctrl_init();
#endif
autostart_start(autostart_processes);
while(1){
int r = 0;
serial_data_handler();
do {
r = process_run();
} while(r > 0);
}
}
/*--------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
leds_on(LEDS_GREEN);
/* xmem_init(); */
rtimer_init();
lcd_init();
watchdog_init();
PRINTF(CONTIKI_VERSION_STRING "\n");
/* PRINTF("Compiled at %s, %s\n", __TIME__, __DATE__);*/
/*
* Hardware initialization done!
*/
leds_on(LEDS_RED);
/* Restore node id if such has been stored in external mem */
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
node_id_burn(node_id);
node_id_restore(); /* also configures node_mac[] */
#endif /* BURN_NODEID */
#else
node_id_restore(); /* also configures node_mac[] */
#endif /* NODE_ID */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef MAC_1
{
uint8_t ieee[] = { MAC_1, MAC_2, MAC_3, MAC_4, MAC_5, MAC_6, MAC_7, MAC_8 };
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
}
#endif
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
random_init(node_id);
NETSTACK_RADIO.init();
#if CC11xx_CC1101 || CC11xx_CC1120
printf("Starting up cc11xx radio at channel %d\n", RF_CHANNEL);
cc11xx_channel_set(RF_CHANNEL);
#endif /* CC11xx_CC1101 || CC11xx_CC1120 */
#if CONFIGURE_CC2420 || CONFIGURE_CC2520
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (rimeaddr_node_addr.u8[0] << 8) + rimeaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n", longaddr[0],
longaddr[1], longaddr[2], longaddr[3], longaddr[4], longaddr[5],
longaddr[6], longaddr[7]);
#if CONFIGURE_CC2420
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
#endif /* CONFIGURE_CC2420 */
#if CONFIGURE_CC2520
cc2520_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
#endif /* CONFIGURE_CC2520 */
}
#if CONFIGURE_CC2420
cc2420_set_channel(RF_CHANNEL);
#endif /* CONFIGURE_CC2420 */
#if CONFIGURE_CC2520
cc2520_set_channel(RF_CHANNEL);
#endif /* CONFIGURE_CC2520 */
#endif /* CONFIGURE_CC2420 || CONFIGURE_CC2520 */
NETSTACK_RADIO.on();
leds_off(LEDS_ALL);
if(node_id > 0) {
PRINTF("Node id %u.\n", node_id);
} else {
PRINTF("Node id not set.\n");
}
#if WITH_UIP6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
queuebuf_init();
netstack_init();
printf("%s/%s %lu %u\n",
NETSTACK_RDC.name,
NETSTACK_MAC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("IPv6 ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(1) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* WITH_UIP6 */
netstack_init();
printf("%s %lu %u\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#ifdef NETSTACK_AES_H
#ifndef NETSTACK_AES_KEY
#error Please define NETSTACK_AES_KEY!
#endif /* NETSTACK_AES_KEY */
{
const uint8_t key[] = NETSTACK_AES_KEY;
netstack_aes_set_key(key);
}
/*printf("AES encryption is enabled: '%s'\n", NETSTACK_AES_KEY);*/
printf("AES encryption is enabled\n");
#else /* NETSTACK_AES_H */
printf("Warning: AES encryption is disabled\n");
#endif /* NETSTACK_AES_H */
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
#if CC11xx_CC1101 || CC11xx_CC1120
printf("cc11xx radio at channel %d\n", RF_CHANNEL);
cc11xx_channel_set(RF_CHANNEL);
#endif /* CC11xx_CC1101 || CC11xx_CC1120 */
#if CONFIGURE_CC2420
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (rimeaddr_node_addr.u8[0] << 8) +
rimeaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
cc2420_set_channel(RF_CHANNEL);
#endif /* CONFIGURE_CC2420 */
NETSTACK_RADIO.on();
/* process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);*/
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
simple_rpl_init();
watchdog_start();
print_processes(autostart_processes);
autostart_start(autostart_processes);
duty_cycle_scroller_start(CLOCK_SECOND * 2);
#if IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP && WITH_SLIP
/* Start the SLIP */
printf("Initiating SLIP: my IP is 172.16.0.2...\n");
slip_arch_init(0);
{
uip_ip4addr_t ipv4addr, netmask;
uip_ipaddr(&ipv4addr, 172, 16, 0, 2);
uip_ipaddr(&netmask, 255, 255, 255, 0);
ip64_set_ipv4_address(&ipv4addr, &netmask);
}
uart1_set_input(slip_input_byte);
#endif /* IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP */
/*
* This is the scheduler loop.
*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
/*--------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(BAUD2UBR(115200));
#endif /* NETSTACK_CONF_WITH_IPV4 */
leds_on(LEDS_GREEN);
/* xmem_init(); */
rtimer_init();
lcd_init();
PRINTF(CONTIKI_VERSION_STRING "\n");
/*
* Hardware initialization done!
*/
leds_on(LEDS_RED);
/* Restore node id if such has been stored in external mem */
// node_id_restore();
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
flash_setup();
flash_clear(0x1800);
flash_write(0x1800, node_id);
flash_done();
#endif /* BURN_NODEID */
#endif /* NODE_ID */
if(node_id == 0) {
node_id = *((unsigned short *)0x1800);
}
memset(node_mac, 0, sizeof(node_mac));
node_mac[6] = node_id >> 8;
node_mac[7] = node_id & 0xff;
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef MAC_1
{
uint8_t ieee[] = { MAC_1, MAC_2, MAC_3, MAC_4, MAC_5, MAC_6, MAC_7, MAC_8 };
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
}
#endif
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
cc2420_init();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
leds_off(LEDS_ALL);
if(node_id > 0) {
PRINTF("Node id %u.\n", node_id);
} else {
PRINTF("Node id not set.\n");
}
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %lu %u\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("IPv6 ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* NETSTACK_CONF_WITH_IPV6 */
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %lu %u\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#if !NETSTACK_CONF_WITH_IPV6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(linkaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
/* process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);*/
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
print_processes(autostart_processes);
autostart_start(autostart_processes);
duty_cycle_scroller_start(CLOCK_SECOND * 2);
/*
* This is the scheduler loop.
*/
watchdog_start();
watchdog_stop(); /* Stop the wdt... */
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
}
int
main(void)
{
#if WITH_SD
int r;
#endif /* WITH_SD */
msp430_cpu_init();
watchdog_stop();
/* Platform-specific initialization. */
msb_ports_init();
adc_init();
clock_init();
rtimer_init();
sht11_init();
leds_init();
leds_on(LEDS_ALL);
irq_init();
process_init();
/* serial interface */
rs232_set_input(serial_line_input_byte);
rs232_init();
serial_line_init();
uart_lock(UART_MODE_RS232);
uart_unlock(UART_MODE_RS232);
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200));
#endif
#if WITH_SD
r = sd_initialize();
if(r < 0) {
printf("Failed to initialize the SD driver: %s\n", sd_error_string(r));
} else {
sd_offset_t capacity;
printf("The SD driver was successfully initialized\n");
capacity = sd_get_capacity();
if(capacity < 0) {
printf("Failed to get the SD card capacity: %s\n", sd_error_string(r));
} else {
printf("SD card capacity: %u MB\n",
(unsigned)(capacity / (1024UL * 1024)));
}
}
#endif
/* System services */
process_start(&etimer_process, NULL);
ctimer_init();
node_id_restore();
init_net();
energest_init();
#if PROFILE_CONF_ON
profile_init();
#endif /* PROFILE_CONF_ON */
leds_off(LEDS_ALL);
printf(CONTIKI_VERSION_STRING " started. Node id %u, using %s.\n",
node_id, rime_mac->name);
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
ENERGEST_ON(ENERGEST_TYPE_CPU);
while (1) {
int r;
#if PROFILE_CONF_ON
profile_episode_start();
#endif /* PROFILE_CONF_ON */
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
#if PROFILE_CONF_ON
profile_episode_end();
#endif /* PROFILE_CONF_ON */
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
if (process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/*
* We only want to measure the processing done in IRQs when we
* are asleep, so we discard the processing time done when we
* were awake.
*/
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
if (uart_edge) {
_BIC_SR(LPM1_bits + GIE);
} else {
_BIS_SR(LPM1_bits + GIE);
}
/*
* We get the current processing time for interrupts that was
* done during the LPM and store it for next time around.
*/
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
#if PROFILE_CONF_ON
profile_clear_timestamps();
#endif /* PROFILE_CONF_ON */
}
}
return 0;
}
/*----------------------------------------------------------------------------
MAIN function
*----------------------------------------------------------------------------*/
int main (void) { /* Main Program */
//************************************************************************************************************
/* this is contiki-code */
watchdog_init();
/* Initialize hardware. */
clock_init();
/* UART4 Initialization */
// uart4_init(115200);
USBD_Init(&USB_OTG_dev, USB_OTG_FS_CORE_ID, &USR_desc, &USBD_CDC_cb, &USR_cb);
// Led initialization
leds_init();
leds_on(LEDS_BLUE);
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s \r\n", PLATFORM_NAME);
#ifdef __USE_LCD
GLCD_Init(); /* Initialize graphical LCD display */
GLCD_Clear(White); /* Clear graphical LCD display */
GLCD_SetBackColor(DarkGreen);
GLCD_SetTextColor(White);
GLCD_DisplayString(0, 0, __FI, " KUSZ - TU Dortmund ");
GLCD_DisplayString(1, 0, __FI, " contiki ");
GLCD_DisplayString(2, 0, __FI, " www.tu-dortmund.de ");
GLCD_SetBackColor(White);
GLCD_SetTextColor(Blue);
watchdog_periodic();
#endif // __USE_LCD
/*
* Initialize Contiki and our processes.
*/
#ifdef WITH_SERIAL_LINE_INPUT
// uart1_set_input(serial_line_input_byte);
// serial_line_init();
#endif
/* rtimer and ctimer should be initialized before radio duty cycling layers*/
rtimer_init();
process_init();
process_start(&sensors_process, NULL);
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* makes use of cpu-specific RNG peripheral - no seed needed */
random_init(0);
/* Set addresses BEFORE starting tcpip process */
addr.u8[0] = 0x02;
addr.u8[1] = *((uint8_t*)0x1FFF7A10);
addr.u8[2] = *((uint8_t*)0x1FFF7A10+1);
addr.u8[3] = 0xFF;
addr.u8[4] = 0xFE;
addr.u8[5] = *((uint8_t*)0x1FFF7A10+2);
addr.u8[6] = *((uint8_t*)0x1FFF7A10+3);
addr.u8[7] = *((uint8_t*)0x1FFF7A10+4);
memcpy(&uip_lladdr.addr, &addr.u8, sizeof(rimeaddr_t));
rimeaddr_set_node_addr(&addr);
rf230_set_pan_addr(0xabcd,0xbabe,(uint8_t *)&addr.u8);
rf230_set_channel(CHANNEL_802_15_4);
rf230_set_txpower(0); /* max */
PRINTF("EUI-64 MAC: %x-%x-%x-%x-%x-%x-%x-%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#define ANNOUNCE_BOOT 1
#if ANNOUNCE_BOOT
PRINTF("%s %s, channel %u , check rate %u Hz tx power %u\n",NETSTACK_MAC.name, NETSTACK_RDC.name, rf230_get_channel(),
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:NETSTACK_RDC.channel_check_interval()),
rf230_get_txpower());
#if UIP_CONF_IPV6_RPL
PRINTF("RPL Enabled\n");
#endif
#if UIP_CONF_ROUTER
PRINTF("Routing Enabled\n");
#endif
#endif /* ANNOUNCE_BOOT */
process_start(&tcpip_process, NULL);
/* Autostart other processes */
autostart_start(autostart_processes);
#if ANNOUNCE_BOOT
PRINTF("Online\n");
#endif /* ANNOUNCE_BOOT */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
watchdog_start();
while (1) { /* Loop forever */
watchdog_periodic();
process_run();
}
}
/**
* \brief Main routine for the cc2538dk platform
*/
int
main(void)
{
nvic_init();
sys_ctrl_init();
clock_init();
dint();
/*Init Watchdog*/
watchdog_init();//Need to check the watchdog on 123gxl
rtimer_init();
lpm_init();
gpio_init();
ioc_init();
leds_init();
fade(LEDS_YELLOW);
button_sensor_init();
/*
* Character I/O Initialisation.
* When the UART receives a character it will call serial_line_input_byte to
* notify the core. The same applies for the USB driver.
*
* If slip-arch is also linked in afterwards (e.g. if we are a border router)
* it will overwrite one of the two peripheral input callbacks. Characters
* received over the relevant peripheral will be handled by
* slip_input_byte instead
*/
#if UART_CONF_ENABLE
uart_init(0);
uart_init(1);
uart_set_input(SERIAL_LINE_CONF_UART, serial_line_input_byte);
#endif
#if USB_SERIAL_CONF_ENABLE
usb_serial_init();
usb_serial_set_input(serial_line_input_byte);
#endif
serial_line_init();
/*Enable EA*/
eint();
INTERRUPTS_ENABLE();
fade(LEDS_GREEN);
PRINTF("=================================\r\n");
PUTS(CONTIKI_VERSION_STRING);
PRINTF("======================\r\n");
PRINTF("\r\n");
PUTS(BOARD_STRING);
PRINTF("\r\n");
#ifdef NODEID
node_id = NODEID;
#ifdef BURN_NODEID
node_id_burn(node_id);
node_id_restore(); /* also configures node_mac[] */
#endif /* BURN_NODEID */
#else
node_id_restore(); /* also configures node_mac[] */
#endif /* NODE_ID */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef MAC_1
{
uint8_t ieee[] = { MAC_1, MAC_2, MAC_3, MAC_4, MAC_5, MAC_6, MAC_7, MAC_8 };
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
}
#endif
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&sensors_process, NULL);
button_sensor_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
printf("finish addr seting\r\n");
/* Initialise the H/W RNG engine. */
random_init(0);
udma_init();
if(node_id > 0) {
printf("Node id %u.\r\n", node_id);
} else {
printf("Node id not set.\r\n");
}
#if WITH_UIP6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
queuebuf_init();
netstack_init();
PRINTF("CC2538 IEEE802154 PANID %d\r\n", IEEE802154_PANID);
cc2538_rf_set_addr(IEEE802154_PANID);
printf("%s/%s %lu %u\r\n",
NETSTACK_RDC.name,
NETSTACK_MAC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("IPv6 ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\r\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(1) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xfc00, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\r\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* WITH_UIP6 */
netstack_init();
PRINTF("CC2538 IEEE802154 PANID %d\r\n", IEEE802154_PANID);
cc2538_rf_set_addr(IEEE802154_PANID);
printf("%s %lu %u\r\n",
NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
#ifdef NETSTACK_AES_H
#ifndef NETSTACK_AES_KEY
#error Please define NETSTACK_AES_KEY!
#endif /* NETSTACK_AES_KEY */
{
const uint8_t key[] = NETSTACK_AES_KEY;
netstack_aes_set_key(key);
}
/*printf("AES encryption is enabled: '%s'\n", NETSTACK_AES_KEY);*/
printf("AES encryption is enabled\r\n");
#else /* NETSTACK_AES_H */
printf("Warning: AES encryption is disabled\r\n");
#endif /* NETSTACK_AES_H */
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
simple_rpl_init();
/*Watch dog configuration*/
watchdog_periodic();
watchdog_start();
autostart_start(autostart_processes);
//duty_cycle_scroller_start(CLOCK_SECOND * 2);
#if IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP && WITH_SLIP
/* Start the SLIP */
printf("Initiating SLIP: my IP is 172.16.0.2...\r\n");
slip_arch_init(0);
{
uip_ip4addr_t ipv4addr, netmask;
uip_ipaddr(&ipv4addr, 172, 16, 0, 2);
uip_ipaddr(&netmask, 255, 255, 255, 0);
ip64_set_ipv4_address(&ipv4addr, &netmask);
}
uart1_set_input(slip_input_byte);
#endif /* IP64_CONF_UIP_FALLBACK_INTERFACE_SLIP */
fade(LEDS_ORANGE);
/*
* This is the scheduler loop.
*/
while(1) {
uint8_t r;
do {
/* Reset watchdog and handle polls and events */
// printf("reset watchdog\r\n");
watchdog_periodic();
r = process_run();
} while(r > 0);
/* We have serviced all pending events. Enter a Low-Power mode. */
lpm_enter();
}
}
/*--------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
uart_init(9600); /* Must come before first printf */
/* xmem_init(); */
PRINTF("iWatch 0.10 build at " __TIME__ " " __DATE__ "\n");
UCSCTL8 &= ~BIT2;
/*
* Hardware initialization done!
*/
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
rtimer_init();
ctimer_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
backlight_init();
battery_init();
SPI_FLASH_Init();
if (system_testing())
{
clock_time_t t;
backlight_on(200, 0);
t = clock_seconds();
// sleep 1
while(clock_seconds() - t <= 3);
printf("$$OK BACKLIGHT\n");
t = clock_seconds();
while(clock_seconds() - t <= 3);
backlight_on(0, 0);
motor_on(200, 0);
// sleep 1s
t = clock_seconds();
while(clock_seconds() - t <= 3);
printf("$$OK MOTOR\n");
t = clock_seconds();
while(clock_seconds() - t <= 3);
motor_on(0, 0);
#if PRODUCT_W001
I2C_Init();
codec_init();
codec_bypass(1);
// sleep 1s
t = clock_seconds();
while(clock_seconds() - t <= 3);
printf("$$OK MIC\n");
// sleep 1s
t = clock_seconds();
while(clock_seconds() - t <= 3);
codec_bypass(0);
codec_shutdown();
#endif
}
int reason = CheckUpgrade();
window_init(reason);
button_init();
rtc_init();
CFSFontWrapperLoad();
system_init(); // check system status and do factor reset if needed
I2C_Init();
//codec_init();
//ant_init();
bluetooth_init();
#ifdef PRODUCT_W004
//bmx_init();
#else
mpu6050_init();
#endif
// check the button status
if (button_snapshot() & (1 << BUTTON_UP))
{
clock_time_t t;
// delay 1 second
// button up is pressed, we will set emerging flag
motor_on(200, CLOCK_SECOND * 2);
t = clock_seconds();
while(clock_seconds() - t <= 1);
if (button_snapshot() & (1 << BUTTON_UP))
system_setemerging();
motor_on(0, 0);
}
if (!system_retail())
{
bluetooth_discoverable(1);
}
#if PRODUCT_W001
if (system_testing())
ant_init(MODE_HRM);
#endif
system_restore();
// protocol_init();
// protocol_start(1);
process_start(&system_process, NULL);
/*
* This is the scheduler loop.
*/
msp430_dco_required = 0;
/*
check firmware update
*/
if (reason == 0xff)
{
printf("Start Upgrade\n");
Upgrade();
// never return if sucessfully upgrade
}
watchdog_start();
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
if (shutdown_mode)
{
system_shutdown(1); // never return
LPM4;
}
if (msp430_dco_required)
{
__low_power_mode_0();
}
else
{
__low_power_mode_3();
}
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
__disable_interrupt();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
__enable_interrupt();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_toggle(LEDS_RED | LEDS_GREEN | LEDS_BLUE);
#if WITH_UIP
slip_arch_init(BAUD2UBR(115200)); /* Must come before first printf */
#else /* WITH_UIP */
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
#endif /* WITH_UIP */
printf("Starting %s "
"($Id: contiki-sky-main.c,v 1.9 2009/11/20 10:45:07 nifi Exp $)\n", __FILE__);
ds2411_init();
xmem_init();
leds_toggle(LEDS_RED | LEDS_GREEN | LEDS_BLUE);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
// node_id_burn(3);
node_id_restore();
printf("node_id : %hu\n", node_id);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);
#if WITH_UIP
uip_init();
uip_sethostaddr(&slipif.ipaddr);
uip_setnetmask(&slipif.netmask);
uip_fw_default(&slipif); /* Point2point, no default router. */
#endif /* WITH_UIP */
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
/*
* Initialize light and humidity/temp sensors.
*/
SENSORS_ACTIVATE(light_sensor);
SENSORS_ACTIVATE(sht11_sensor);
ctimer_init();
set_rime_addr();
cc2420_init();
cc2420_set_pan_addr(panId, 0 /*XXX*/, ds2411_id);
cc2420_set_channel(RF_CHANNEL);
cc2420_set_txpower(31);
nullmac_init(&cc2420_driver);
rime_init(&nullmac_driver);
// xmac_init(&cc2420_driver);
// rime_init(&xmac_driver);
/* rimeaddr_set_node_addr*/
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
#endif /* WITH_UIP */
SENSORS_ACTIVATE(button_sensor);
print_processes(autostart_processes);
autostart_start(autostart_processes);
energest_init();
/*
* This is the scheduler loop.
*/
printf("process_run()...\n");
ENERGEST_ON(ENERGEST_TYPE_CPU);
while (1) {
do {
/* Reset watchdog. */
} while(process_run() > 0);
/*
* Idle processing.
*/
if(lpm_en) {
int s = splhigh(); /* Disable interrupts. */
if(process_nevents() != 0) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
_BIS_SR(GIE | SCG0 | /*SCG1 |*/ CPUOFF); /* LPM3 sleep. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
#if WITH_TINYOS_AUTO_IDS
uint16_t TOS_NODE_ID = 0x1234; /* non-zero */
uint16_t TOS_LOCAL_ADDRESS = 0x1234; /* non-zero */
#endif /* WITH_TINYOS_AUTO_IDS */
int
main(void)
{
/* Set stack overflow address for detecting overflow in runtime */
vAHI_SetStackOverflow(TRUE, ((uint32_t *)&heap_location)[0]);
/* Initialize random with a seed from the SoC random generator.
* This must be done before selecting the high-precision external oscillator.
*/
vAHI_StartRandomNumberGenerator(E_AHI_RND_SINGLE_SHOT, E_AHI_INTS_DISABLED);
random_init(u16AHI_ReadRandomNumber());
clock_init();
rtimer_init();
#if JN516X_EXTERNAL_CRYSTAL_OSCILLATOR
/* initialize the 32kHz crystal and wait for ready */
xosc_init();
/* need to reinitialize because the wait-for-ready process uses system timers */
clock_init();
rtimer_init();
#endif
watchdog_init();
leds_init();
leds_on(LEDS_ALL);
init_node_mac();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
node_id_restore();
#if WITH_TINYOS_AUTO_IDS
node_id = TOS_NODE_ID;
#endif /* WITH_TINYOS_AUTO_IDS */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
node_mac[7] = node_id & 0xff;
}
#endif
process_init();
ctimer_init();
uart0_init(UART_BAUD_RATE); /* Must come before first PRINTF */
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(UART_BAUD_RATE);
#endif /* NETSTACK_CONF_WITH_IPV4 */
/* check for reset source */
if(bAHI_WatchdogResetEvent()) {
PRINTF("Init: Watchdog timer has reset device!\r\n");
}
process_start(&etimer_process, NULL);
set_linkaddr();
netstack_init();
#if NETSTACK_CONF_WITH_IPV6
#if UIP_CONF_IPV6_RPL
PRINTF(CONTIKI_VERSION_STRING " started with IPV6, RPL\n");
#else
PRINTF(CONTIKI_VERSION_STRING " started with IPV6\n");
#endif
#elif NETSTACK_CONF_WITH_IPV4
PRINTF(CONTIKI_VERSION_STRING " started with IPV4\n");
#else
PRINTF(CONTIKI_VERSION_STRING " started\n");
#endif
if(node_id > 0) {
PRINTF("Node id is set to %u.\n", node_id);
} else {
PRINTF("Node id is not set.\n");
}
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
queuebuf_init();
#endif /* NETSTACK_CONF_WITH_IPV6 */
PRINTF("%s %s %s\n", NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name);
#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level((linkaddr_node_addr.u8[0] << 4) + 16);
#endif /* TIMESYNCH_CONF_ENABLED */
#if NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172, 16,
linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255, 255, 0, 0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
PRINTF("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* NETSTACK_CONF_WITH_IPV4 */
watchdog_start();
NETSTACK_LLSEC.init();
#if NETSTACK_CONF_WITH_IPV6
start_uip6();
#endif /* NETSTACK_CONF_WITH_IPV6 */
/* need this to reliably generate the first rtimer callback and callbacks in other
auto-start processes */
(void)u32AHI_Init();
start_autostart_processes();
leds_off(LEDS_ALL);
main_loop();
return -1;
}
/*! \brief Main function. Execution starts here.
*/
int main(void)
{
sysclk_init();
irq_initialize_vectors();
cpu_irq_enable();
/* Initialize the sleep manager */
sleepmgr_init();
/* Initialize the SAM board */
board_init();
/* Serial line [UART] initialization */
uart1_init(CONF_UART_BAUDRATE);
#if WITH_SERIAL_LINE_INPUT
/* If SLIP-radio is enabled, the handler is overridden. */
uart1_set_input(serial_line_input_byte);
#endif
while(!uart_is_tx_ready(CONSOLE_UART));
/* PRINT Contiki Entry String */
PRINTF("Starting ");
PRINTF(CONTIKI_VERSION_STRING);
/* Configure sys-tick for 1 ms */
clock_init();
/* Initialize Contiki Process function */
process_init();
/* rtimer and ctimer should be initialized before radio duty cycling layers*/
rtimer_init();
/* etimer_process should be initialized before ctimer */
process_start(&etimer_process, NULL);
/* Initialize the ctimer process */
ctimer_init();
#ifdef WITH_LED_DEBUGGING
configure_led_debug_pins();
#ifdef WITH_AR9170_WIFI_SUPPORT
configure_ar9170_disconnect_pins();
#endif
#endif
/* rtimer initialization */
rtimer_init();
/* Network protocol stack initialization */
netstack_init();
/* Process init initialization */
procinit_init();
/* Initialize energy estimation routines */
energest_init();
/* Initialize watch-dog process */
watchdog_start();
#ifdef WITH_AR9170_WIFI_SUPPORT
#ifdef WITH_USB_SUPPORT
/* Start network-related system processes. */
#if WITH_UIP6
#ifdef WITH_SLIP
#warning SLIP_RADIO enabled!
process_start(&slip_radio_process, NULL);
#endif
#endif
#else
#error USB support must be enabled.
#endif
#endif
#ifdef WITH_USB_SUPPORT
/* Start ARM Cortex-M3 USB Host Stack */
uhc_start();
configure_ar9170_disconnect_pins();
#endif
/* Autostart all declared [not system] processes */
//autostart_start(autostart_processes);
#if UIP_CONF_IPV6
printf("Tentative link-local IPv6 address: ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#endif /* UIP_CONF_IPV6 */
PRINTF("Starting Contiki OS main loop...\n");
while(true) {
/* Contiki Polling System */
process_run();
}
}
/**
* \brief Main routine for the cc2538dk platform
*/
int
main(void)
{
nvic_init();
ioc_init();
sys_ctrl_init();
clock_init();
lpm_init();
rtimer_init();
gpio_init();
leds_init();
fade(LEDS_YELLOW);
process_init();
watchdog_init();
button_sensor_init();
/*
* Character I/O Initialisation.
* When the UART receives a character it will call serial_line_input_byte to
* notify the core. The same applies for the USB driver.
*
* If slip-arch is also linked in afterwards (e.g. if we are a border router)
* it will overwrite one of the two peripheral input callbacks. Characters
* received over the relevant peripheral will be handled by
* slip_input_byte instead
*/
#if UART_CONF_ENABLE
uart_init(0);
uart_init(1);
uart_set_input(SERIAL_LINE_CONF_UART, serial_line_input_byte);
#endif
#if USB_SERIAL_CONF_ENABLE
usb_serial_init();
usb_serial_set_input(serial_line_input_byte);
#endif
serial_line_init();
INTERRUPTS_ENABLE();
fade(LEDS_GREEN);
PUTS(CONTIKI_VERSION_STRING);
PUTS(BOARD_STRING);
PRINTF(" Net: ");
PRINTF("%s\n", NETSTACK_NETWORK.name);
PRINTF(" MAC: ");
PRINTF("%s\n", NETSTACK_MAC.name);
PRINTF(" RDC: ");
PRINTF("%s\n", NETSTACK_RDC.name);
/* Initialise the H/W RNG engine. */
random_init(0);
udma_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rf_params();
#if CRYPTO_CONF_INIT
crypto_init();
crypto_disable();
#endif
netstack_init();
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, &linkaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
adc_init();
process_start(&sensors_process, NULL);
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_ORANGE);
while(1) {
uint8_t r;
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic();
r = process_run();
} while(r > 0);
/* We have serviced all pending events. Enter a Low-Power mode. */
lpm_enter();
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/* Hardware initialization */
clock_init();
soc_init();
rtimer_init();
/* Init LEDs here */
leds_init();
leds_off(LEDS_ALL);
fade(LEDS_GREEN);
/* initialize process manager. */
process_init();
/* Init UART */
uart0_init();
#if DMA_ON
dma_init();
#endif
#if SLIP_ARCH_CONF_ENABLE
slip_arch_init(0);
#else
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
fade(LEDS_RED);
PUTSTRING("##########################################\n");
putstring(CONTIKI_VERSION_STRING "\n");
putstring("TI SmartRF05 EB\n");
switch(CHIPID) {
case 0xA5:
putstring("cc2530");
break;
case 0xB5:
putstring("cc2531");
break;
case 0x95:
putstring("cc2533");
break;
case 0x8D:
putstring("cc2540");
break;
}
putstring("-F");
switch(CHIPINFO0 & 0x70) {
case 0x40:
putstring("256, ");
break;
case 0x30:
putstring("128, ");
break;
case 0x20:
putstring("64, ");
break;
case 0x10:
putstring("32, ");
break;
}
puthex(CHIPINFO1 + 1);
putstring("KB SRAM\n");
PUTSTRING("\nSDCC Build:\n");
#if STARTUP_VERBOSE
#ifdef HAVE_SDCC_BANKING
PUTSTRING(" With Banking.\n");
#endif /* HAVE_SDCC_BANKING */
#ifdef SDCC_MODEL_LARGE
PUTSTRING(" --model-large\n");
#endif /* SDCC_MODEL_LARGE */
#ifdef SDCC_MODEL_HUGE
PUTSTRING(" --model-huge\n");
#endif /* SDCC_MODEL_HUGE */
#ifdef SDCC_STACK_AUTO
PUTSTRING(" --stack-auto\n");
#endif /* SDCC_STACK_AUTO */
PUTCHAR('\n');
PUTSTRING(" Net: ");
PUTSTRING(NETSTACK_NETWORK.name);
PUTCHAR('\n');
PUTSTRING(" MAC: ");
PUTSTRING(NETSTACK_MAC.name);
PUTCHAR('\n');
PUTSTRING(" RDC: ");
PUTSTRING(NETSTACK_RDC.name);
PUTCHAR('\n');
PUTSTRING("##########################################\n");
#endif
watchdog_init();
/* Initialise the H/W RNG engine. */
random_init(0);
/* start services */
process_start(&etimer_process, NULL);
ctimer_init();
/* initialize the netstack */
netstack_init();
set_rime_addr();
#if BUTTON_SENSOR_ON || ADC_SENSOR_ON
process_start(&sensors_process, NULL);
BUTTON_SENSOR_ACTIVATE();
ADC_SENSOR_ACTIVATE();
#endif
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* UIP_CONF_IPV6 */
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_YELLOW);
while(1) {
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic();
#if CLOCK_CONF_STACK_FRIENDLY
if(sleep_flag) {
if(etimer_pending() &&
(etimer_next_expiration_time() - clock_time() - 1) > MAX_TICKS) {
etimer_request_poll();
}
sleep_flag = 0;
}
#endif
r = process_run();
} while(r > 0);
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
#if LPM_MODE
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & HFRC_STB)); /* Wait for RCOSC to be stable */
CLKCON |= OSC; /* Switch to the RCOSC */
while(!(CLKCON & OSC)); /* Wait till it's happened */
SLEEP |= OSC_PD; /* Turn the other one off */
#endif /* LPM_MODE==LPM_MODE_PM2 */
/*
* Set MCU IDLE or Drop to PM1. Any interrupt will take us out of LPM
* Sleep Timer will wake us up in no more than 7.8ms (max idle interval)
*/
SLEEPCMD = (SLEEPCMD & 0xFC) | (LPM_MODE - 1);
#if (LPM_MODE==LPM_MODE_PM2)
/*
* Wait 3 NOPs. Either an interrupt occurred and SLEEP.MODE was cleared or
* no interrupt occurred and we can safely power down
*/
__asm
nop
nop
nop
__endasm;
if(SLEEPCMD & SLEEP_MODE0) {
#endif /* LPM_MODE==LPM_MODE_PM2 */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Go IDLE or Enter PM1 */
PCON |= PCON_IDLE;
/* First instruction upon exiting PM1 must be a NOP */
__asm
nop
__endasm;
/* Remember energest IRQ for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_ON(ENERGEST_TYPE_CPU);
ENERGEST_OFF(ENERGEST_TYPE_LPM);
#if (LPM_MODE==LPM_MODE_PM2)
SLEEPCMD &= ~SLEEP_OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEPCMD & SLEEP_XOSC_STB)); /* Wait for XOSC to be stable */
CLKCONCMD &= ~CLKCONCMD_OSC; /* Switch to the XOSC */
/*
* On occasion the XOSC is reported stable when in reality it's not.
* We need to wait for a safeguard of 64us or more before selecting it
*/
clock_delay(10);
while(CLKCONCMD & CLKCONCMD_OSC); /* Wait till it's happened */
}
#endif /* LPM_MODE==LPM_MODE_PM2 */
#endif /* LPM_MODE */
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/* Hardware initialization */
bus_init();//ʱÖÓ³õʼ»¯
rtimer_init();//¼ÆʱÆ÷³õʼ»¯
/* model-specific h/w init. */
io_port_init();
/* Init LEDs here */
leds_init();//LED³õʼ»¯
/*LEDS_GREEN indicate LEDs Init finished*/
fade(LEDS_GREEN);
/* initialize process manager. */
process_init();//½ø³Ì¹ÜÀí³õʼ»¯
/* Init UART0
* Based on the EJOY MCU CC2430 Circuit Design
* */
uart0_init();//UART0´®¿Ú³õʼ»¯
#if DMA_ON
dma_init();//DMA³õʼ»¯
#endif
#if SLIP_ARCH_CONF_ENABLE
/* On cc2430, the argument is not used */
slip_arch_init(0);//SLIP³õʼ»¯
#else
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
PUTSTRING("##########################################\n");
putstring(CONTIKI_VERSION_STRING "\n");
// putstring(SENSINODE_MODEL " (CC24");
puthex(((CHIPID >> 3) | 0x20));
putstring("-" FLASH_SIZE ")\n");
#if STARTUP_VERBOSE
#ifdef HAVE_SDCC_BANKING
PUTSTRING(" With Banking.\n");
#endif /* HAVE_SDCC_BANKING */
#ifdef SDCC_MODEL_LARGE
PUTSTRING(" --model-large\n");
#endif /* SDCC_MODEL_LARGE */
#ifdef SDCC_MODEL_HUGE
PUTSTRING(" --model-huge\n");
#endif /* SDCC_MODEL_HUGE */
#ifdef SDCC_STACK_AUTO
PUTSTRING(" --stack-auto\n");
#endif /* SDCC_STACK_AUTO */
PUTCHAR('\n');
PUTSTRING(" Net: ");
PUTSTRING(NETSTACK_NETWORK.name);
PUTCHAR('\n');
PUTSTRING(" MAC: ");
PUTSTRING(NETSTACK_MAC.name);
PUTCHAR('\n');
PUTSTRING(" RDC: ");
PUTSTRING(NETSTACK_RDC.name);
PUTCHAR('\n');
PUTSTRING("##########################################\n");
#endif
watchdog_init();//¿´ÃŹ·³õʼ»¯
/* Initialise the cc2430 RNG engine. */
random_init(0);//Ëæ»úÊýÉú³ÉÆ÷³õʼ»¯
/* start services */
process_start(&etimer_process, NULL);//
ctimer_init();//ctimer³õʼ»¯
/* initialize the netstack */
netstack_init();//ÍøÂçµ×²ãÕ»³õʼ»¯
set_rime_addr();//rimeµØÖ·ÉèÖÃ
//there is no sensor for us maintenance
#if BUTTON_SENSOR_ON || ADC_SENSOR_ON
process_start(&sensors_process, NULL);
sensinode_sensors_activate();
#endif
//IPV6,YES!
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
//DISCO
#if DISCO_ENABLED
process_start(&disco_process, NULL);
#endif /* DISCO_ENABLED */
//VIZTOOL
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
#if (!UIP_CONF_IPV6_RPL)
{
uip_ipaddr_t ipaddr;
uip_ip6addr(&ipaddr, 0x2001, 0x630, 0x301, 0x6453, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
}
#endif /* UIP_CONF_IPV6_RPL */
#endif /* UIP_CONF_IPV6 */
/*
* Acknowledge the UART1 RX interrupt
* now that we're sure we are ready to process it
*
* We don't need it. by MW
*/
// model_uart_intr_en();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
fade(LEDS_RED);
#if BATMON_CONF_ON
process_start(&batmon_process, NULL);
#endif
autostart_start(autostart_processes);
watchdog_start();
while(1) {
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic();
/**/
#if !CLOCK_CONF_ACCURATE
if(sleep_flag) {
if(etimer_pending() &&
(etimer_next_expiration_time() - count - 1) > MAX_TICKS) { /*core/sys/etimer.c*/
etimer_request_poll();
}
sleep_flag = 0;
}
#endif
r = process_run();
} while(r > 0);
#if SHORTCUTS_CONF_NETSTACK
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
#endif
#if LPM_MODE
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & HFRC_STB)); /* Wait for RCOSC to be stable */
CLKCON |= OSC; /* Switch to the RCOSC */
while(!(CLKCON & OSC)); /* Wait till it's happened */
SLEEP |= OSC_PD; /* Turn the other one off */
#endif /* LPM_MODE==LPM_MODE_PM2 */
/*
* Set MCU IDLE or Drop to PM1. Any interrupt will take us out of LPM
* Sleep Timer will wake us up in no more than 7.8ms (max idle interval)
*/
SLEEP = (SLEEP & 0xFC) | (LPM_MODE - 1);
#if (LPM_MODE==LPM_MODE_PM2)
/*
* Wait 3 NOPs. Either an interrupt occurred and SLEEP.MODE was cleared or
* no interrupt occurred and we can safely power down
*/
__asm
nop
nop
nop
__endasm;
if (SLEEP & SLEEP_MODE0) {
#endif /* LPM_MODE==LPM_MODE_PM2 */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Go IDLE or Enter PM1 */
PCON |= IDLE;
/* First instruction upon exiting PM1 must be a NOP */
__asm
nop
__endasm;
/* Remember energest IRQ for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_ON(ENERGEST_TYPE_CPU);
ENERGEST_OFF(ENERGEST_TYPE_LPM);
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & XOSC_STB)); /* Wait for XOSC to be stable */
CLKCON &= ~OSC; /* Switch to the XOSC */
/*
* On occasion the XOSC is reported stable when in reality it's not.
* We need to wait for a safeguard of 64us or more before selecting it
*/
clock_delay(10);
while(CLKCON & OSC); /* Wait till it's happened */
}
#endif /* LPM_MODE==LPM_MODE_PM2 */
#endif /* LPM_MODE */
}
}
/**
* \brief Main function for nRF52dk platform.
* \note This function doesn't return.
*/
int
main(void)
{
board_init();
leds_init();
clock_init();
rtimer_init();
watchdog_init();
process_init();
// Seed value is ignored since hardware RNG is used.
random_init(0);
#ifdef UART0_ENABLED
uart0_init();
#if SLIP_ARCH_CONF_ENABLE
slip_arch_init(0);
#else
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
#endif
PRINTF("Starting " CONTIKI_VERSION_STRING "\n");
process_start(&etimer_process, NULL);
ctimer_init();
#if ENERGEST_CONF_ON
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
#endif
#ifdef SOFTDEVICE_PRESENT
ble_stack_init();
ble_advertising_init(DEVICE_NAME);
#if NETSTACK_CONF_WITH_IPV6
netstack_init();
linkaddr_t linkaddr;
ble_get_mac(linkaddr.u8);
/* Set link layer address */
linkaddr_set_node_addr(&linkaddr);
/* Set device link layer address in uip stack */
memcpy(&uip_lladdr.addr, &linkaddr, sizeof(uip_lladdr.addr));
process_start(&ble_iface_observer, NULL);
process_start(&tcpip_process, NULL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#endif /* SOFTDEVICE_PRESENT */
process_start(&sensors_process, NULL);
autostart_start(autostart_processes);
watchdog_start();
#ifdef SOFTDEVICE_PRESENT
ble_advertising_start();
PRINTF("Advertising name [%s]\n", DEVICE_NAME);
#endif
while(1) {
uint8_t r;
do {
r = process_run();
watchdog_periodic();
} while(r > 0);
lpm_drop();
}
}
/**
* \brief Main routine for the cc2538dk platform
*/
int main(void) {
// Just for test purposes
uint16_t temperature = 0;
uint16_t humidity = 0;
float* temperature_f;
float* humidity_f;
unsigned char* checksum;
unsigned char status;
unsigned char temp_data = 0xff;
/* unsigned char err = 0; SHT11 disabled */
nvic_init();
sys_ctrl_init();
clock_init();
lpm_init();
rtimer_init();
gpio_init();
ioc_init();
i2c_init();
leds_init();
fade(LEDS_YELLOW);
process_init();
watchdog_init();
button_sensor_init();
/*
* Character I/O Initialisation.
* When the UART receives a character it will call serial_line_input_byte to
* notify the core. The same applies for the USB driver.
*
* If slip-arch is also linked in afterwards (e.g. if we are a border router)
* it will overwrite one of the two peripheral input callbacks. Characters
* received over the relevant peripheral will be handled by
* slip_input_byte instead
*/
#if UART_CONF_ENABLE
uart_init();
uart_set_input(serial_line_input_byte);
#endif
#if USB_SERIAL_CONF_ENABLE
usb_serial_init();
usb_serial_set_input(serial_line_input_byte);
#endif
serial_line_init();
INTERRUPTS_ENABLE();
fade(LEDS_GREEN);
PUTS(CONTIKI_VERSION_STRING);PUTS(BOARD_STRING);
PRINTF(" Net: ");PRINTF("%s\n", NETSTACK_NETWORK.name);PRINTF(" MAC: ");PRINTF("%s\n", NETSTACK_MAC.name);PRINTF(" RDC: ");PRINTF("%s\n", NETSTACK_RDC.name);
/* Initialise the H/W RNG engine. */
random_init(0);
udma_init();
process_start(&etimer_process, NULL);
ctimer_init();
set_rime_addr();
netstack_init();
cc2538_rf_set_addr(IEEE802154_PANID);
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* UIP_CONF_IPV6 */
process_start(&sensors_process, NULL);
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_ORANGE);
while (1) {
uint8_t r;
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic();
r = process_run();
/*
err = s_measure(&temperature, checksum, TEMP);
if (err == 0)
{
PRINTF("Temperature (ADC value) = 0x%4x\n", temperature);
err = s_measure(&humidity, checksum, HUMI);
if (err == 0)
{
PRINTF("Humidity (ADC value) = 0x%4x\n", humidity);
float tc=sht11_TemperatureC(temperature);
float hc=sht11_Humidity(temperature,humidity);
printf("temp:%u.%u\nhumidity:%u.%u\n",(int)tc,((int)(tc*10))%10 , (int)hc,((int)(hc*10))%10);
}
else
PRINTF("SHT11 error - could not read humidity!\n");
}
else
PRINTF("SHT11 error - could not read temperature!\n");
*/
/*err = s_write_statusreg(&temp_data);
if (err == 0)
{
err = s_read_statusreg(&status, checksum);
if (err == 0)
PRINTF("STATUS REGISTER = 0x%2x", status);
else
PRINTF("SHT11 error - could not read status register!\n");
}*/
} while (r > 0);
/* We have serviced all pending events. Enter a Low-Power mode. */
lpm_enter();
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
clock_init(); // 初始化 睡眠定时器 必要
soc_init(); // 还函数中启动了全局中断 可修改
rtimer_init(); // rtimer为定时器1 必要
/* Init LEDs here */
leds_init(); // 初始化LED 可修改
leds_off(LEDS_ALL); // 关闭所有LED 非必要
fade(LEDS_GREEN); // 绿色闪烁一下 非必要
/* initialize process manager. */
process_init(); // 任务初始化 必要
/* Init UART */
uart0_init(); // 初始化串口0，先用于调试，可修改
#if DMA_ON
dma_init(); // 非必要
#endif
#if SLIP_ARCH_CONF_ENABLE
slip_arch_init(0);
#else
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
fade(LEDS_RED); // 红色LED闪烁一下 非必要
// 打印若干提示信息 非必要 可修改
putstring("**************************************\r\n");
putstring(CONTIKI_VERSION_STRING "\r\n"); // 打印若干信息
putstring("Platform CC2530 NB\r\n");
switch(CHIPID) {
case 0xA5:
putstring("CC2530");
break;
case 0xB5:
putstring("CC2531");
break;
case 0x95:
putstring("CC2533");
break;
case 0x8D:
putstring("CC2540");
break;
}
putstring("-F");
switch(CHIPINFO0 & 0x70) {
case 0x40:
putstring("256,");
break;
case 0x30:
putstring("128,");
break;
case 0x20:
putstring("64,");
break;
case 0x10:
putstring("32,");
break;
}
puthex(CHIPINFO1 + 1);
putstring("KB SRAM\r\n");
#if STARTUP_VERBOSE
PUTSTRING("Net: "); // NETWORK名称
PUTSTRING(NETSTACK_NETWORK.name);
PUTCHAR('\r');PUTCHAR('\n');
PUTSTRING("MAC: "); // MAC名称
PUTSTRING(NETSTACK_MAC.name);
PUTCHAR('\r');PUTCHAR('\n');
PUTSTRING("RDC: "); // RDC名称
PUTSTRING(NETSTACK_RDC.name);
PUTCHAR('\r');PUTCHAR('\n');
PUTSTRING("**************************************\r\n");
#endif
watchdog_init(); // 初始化看门狗
/* Initialise the H/W RNG engine. */
random_init(0); //
/* start services */
process_start(&etimer_process, NULL); // 启动etimer任务
ctimer_init(); // ctimer初始化
/* initialize the netstack */
netstack_init(); // NET协议栈初始化
set_rime_addr(); // 设置RIME地址，相当于设置IP地址
#if BUTTON_SENSOR_ON || ADC_SENSOR_ON
process_start(&sensors_process, NULL);
BUTTON_SENSOR_ACTIVATE();
ADC_SENSOR_ACTIVATE();
#endif
#if UIP_CONF_IPV6 // 非常重要，启动TCPIP查询任务
memcpy(&uip_lladdr.addr, &rimeaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* UIP_CONF_IPV6 */
#if VIZTOOL_CONF_ON
process_start(&viztool_process, NULL);
#endif
energest_init(); // 能量估计初始化，但是该功能未被打开
ENERGEST_ON(ENERGEST_TYPE_CPU); // 该功能未被打开
autostart_start(autostart_processes); // 启动被定义为自动启动的任务
watchdog_start(); // 看门狗初始化
fade(LEDS_YELLOW); // 黄色LED闪烁，完成所有初始化工作
while(1) {
do {
/* Reset watchdog and handle polls and events */
watchdog_periodic(); // 喂狗操作
r = process_run();
} while(r > 0);
#if SHORTCUTS_CONF_NETSTACK // 循环查询无线输入数据包长度 tcpip_process
len = NETSTACK_RADIO.pending_packet();
if(len) {
packetbuf_clear();
len = NETSTACK_RADIO.read(packetbuf_dataptr(), PACKETBUF_SIZE);
if(len > 0) {
packetbuf_set_datalen(len);
NETSTACK_RDC.input();
}
}
#endif
#if LPM_MODE // 该宏被定义为0，没有休眠功能，以下代码均无效
#if (LPM_MODE==LPM_MODE_PM2)
SLEEP &= ~OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEP & HFRC_STB)); /* Wait for RCOSC to be stable */
CLKCON |= OSC; /* Switch to the RCOSC */
while(!(CLKCON & OSC)); /* Wait till it's happened */
SLEEP |= OSC_PD; /* Turn the other one off */
#endif /* LPM_MODE==LPM_MODE_PM2 */
/*
* Set MCU IDLE or Drop to PM1. Any interrupt will take us out of LPM
* Sleep Timer will wake us up in no more than 7.8ms (max idle interval)
*/
SLEEPCMD = (SLEEPCMD & 0xFC) | (LPM_MODE - 1);
#if (LPM_MODE==LPM_MODE_PM2)
/*
* Wait 3 NOPs. Either an interrupt occurred and SLEEP.MODE was cleared or
* no interrupt occurred and we can safely power down
*/
__asm
nop
nop
nop
__endasm;
if(SLEEPCMD & SLEEP_MODE0) {
#endif /* LPM_MODE==LPM_MODE_PM2 */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We are only interested in IRQ energest while idle or in LPM */
ENERGEST_IRQ_RESTORE(irq_energest);
/* Go IDLE or Enter PM1 */
PCON |= PCON_IDLE;
/* First instruction upon exiting PM1 must be a NOP */
__asm
nop
__endasm;
/* Remember energest IRQ for next pass */
ENERGEST_IRQ_SAVE(irq_energest);
ENERGEST_ON(ENERGEST_TYPE_CPU);
ENERGEST_OFF(ENERGEST_TYPE_LPM);
#if (LPM_MODE==LPM_MODE_PM2)
SLEEPCMD &= ~SLEEP_OSC_PD; /* Make sure both HS OSCs are on */
while(!(SLEEPCMD & SLEEP_XOSC_STB)); /* Wait for XOSC to be stable */
CLKCONCMD &= ~CLKCONCMD_OSC; /* Switch to the XOSC */
/*
* On occasion the XOSC is reported stable when in reality it's not.
* We need to wait for a safeguard of 64us or more before selecting it
*/
clock_delay(10);
while(CLKCONCMD & CLKCONCMD_OSC); /* Wait till it's happened */
}
#endif /* LPM_MODE==LPM_MODE_PM2 */
#endif /* LPM_MODE */
}
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
clock_wait(100);
uart0_init(BAUD2UBR(UART0_BAUD_RATE)); /* Must come before first printf */
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(BAUD2UBR(UART0_BAUD_RATE));
#endif /* NETSTACK_CONF_WITH_IPV4 */
xmem_init();
rtimer_init();
/*
* Hardware initialization done!
*/
/* Restore node id if such has been stored in external mem */
node_id_restore();
/* If no MAC address was burned, we use the node id or the Z1 product ID */
if(!(node_mac[0] | node_mac[1] | node_mac[2] | node_mac[3] |
node_mac[4] | node_mac[5] | node_mac[6] | node_mac[7])) {
#ifdef SERIALNUM
if(!node_id) {
PRINTF("Node id is not set, using Z1 product ID\n");
node_id = SERIALNUM;
}
#endif
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = node_id >> 8;
node_mac[7] = node_id & 0xff;
}
/* Overwrite node MAC if desired at compile time */
#ifdef MACID
#warning "***** CHANGING DEFAULT MAC *****"
node_mac[0] = 0xc1; /* Hardcoded for Z1 */
node_mac[1] = 0x0c; /* Hardcoded for Revision C */
node_mac[2] = 0x00; /* Hardcoded to arbitrary even number so that
the 802.15.4 MAC address is compatible with
an Ethernet MAC address - byte 0 (byte 2 in
the DS ID) */
node_mac[3] = 0x00; /* Hardcoded */
node_mac[4] = 0x00; /* Hardcoded */
node_mac[5] = 0x00; /* Hardcoded */
node_mac[6] = MACID >> 8;
node_mac[7] = MACID & 0xff;
#endif
#ifdef IEEE_802154_MAC_ADDRESS
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
node_mac[7] = node_id & 0xff;
}
#endif /* IEEE_802154_MAC_ADDRESS */
/*
* Initialize Contiki and our processes.
*/
random_init(node_mac[6] + node_mac[7]);
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
init_platform();
set_rime_addr();
cc2420_init();
SENSORS_ACTIVATE(adxl345);
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
leds_off(LEDS_ALL);
#ifdef SERIALNUM
PRINTF("Ref ID: %u\n", SERIALNUM);
#endif
PRINTF(CONTIKI_VERSION_STRING " started. ");
if(node_id) {
PRINTF("Node id is set to %u.\n", node_id);
} else {
PRINTF("Node id not set\n");
}
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
/* sicslowpan_init(sicslowmac_init(&cc2420_driver)); */
/* printf(" %s channel %u\n", sicslowmac_driver.name, CC2420_CONF_CHANNEL); */
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
netstack_init();
// NETSTACK_RDC.init();
// NETSTACK_MAC.init();
// NETSTACK_LLSEC.init();
// NETSTACK_NETWORK.init();
printf("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* NETSTACK_CONF_WITH_IPV6 */
netstack_init();
//NETSTACK_RDC.init();
//NETSTACK_MAC.init();
//NETSTACK_LLSEC.init();
//NETSTACK_NETWORK.init();
printf("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
uart0_set_input(serial_line_input_byte);
serial_line_init();
#endif
leds_off(LEDS_GREEN);
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level(linkaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */
#if NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172, 16,
linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255, 255, 0, 0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
printf("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* NETSTACK_CONF_WITH_IPV4 */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
print_processes(autostart_processes);
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
watchdog_start();
/* watchdog_stop();*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart0_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart0_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if(timer_expired(&mgt_timer)) {
timer_reset(&mgt_timer);
msp430_sync_dco();
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initialize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
// Led initialization
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s\r\n",boardDescription->name);
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
process_start(&etimer_process, NULL);
ctimer_init();
rtimer_init();
netstack_init();
set_rime_addr();
PRINTF("ACK enable=%u %s %s, channel check rate=%luHz, check interval %ums, clock second=%u, radio channel %u\r\n",
ST_RadioAutoAckEnabled(), NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()), NETSTACK_RDC.channel_check_interval(), CLOCK_SECOND,
RF_CHANNEL);
#if !UIP_CONF_IPV6
ST_RadioEnableAutoAck(FALSE); // Because frames are not 802.15.4 compatible.
ST_RadioEnableAddressFiltering(FALSE);
#endif
ST_RadioEnableAutoAck(TRUE);
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
while(1){
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
//watchdog_stop();
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE,0);
/* We are awake. */
//watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initalize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
/* Led initialization */
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s\r\n", boardDescription->name);
boardPrintStringDescription();
PRINTF("\r\n");
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
/* rtimer and ctimer should be initialized before radio duty cycling
layers */
rtimer_init();
/* etimer_process should be initialized before ctimer */
process_start(&etimer_process, NULL);
ctimer_init();
netstack_init();
set_rime_addr();
printf("%s %s, channel check rate %lu Hz\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()));
printf("802.15.4 PAN ID 0x%x, EUI-%d:",
IEEE802154_CONF_PANID, UIP_CONF_LL_802154?64:16);
uip_debug_lladdr_print(&linkaddr_node_addr);
printf(", radio channel %u\n", RF_CHANNEL);
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
/* Set the Clear Channel Assessment (CCA) threshold of the
radio. The CCA threshold is used both for sending packets and for
waking up ContikiMAC nodes. If the CCA threshold is too high,
ContikiMAC will not wake up from neighbor transmissions. If the
CCA threshold is too low, transmissions will be too restrictive
and no packets will be sent. DEFAULT_RADIO_CCA_THRESHOLD is
defined in this file. */
ST_RadioSetEdCcaThreshold(DEFAULT_RADIO_CCA_THRESHOLD);
autostart_start(autostart_processes);
#if UIP_CONF_IPV6
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#endif /* UIP_CONF_IPV6 */
watchdog_start();
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
/* watchdog_stop(); */
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE,0);
/* We are awake. */
/* watchdog_start(); */
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
/**
* \brief Main function for CC26xx-based platforms
*
* The same main() is used for both Srf+CC26xxEM as well as for the SensorTag
*/
int
main(void)
{
/* Set the LF XOSC as the LF system clock source */
select_lf_xosc();
/*
* Make sure to open the latches - this will be important when returning
* from shutdown
*/
ti_lib_pwr_ctrl_io_freeze_disable();
/* Use DCDC instead of LDO to save current */
ti_lib_pwr_ctrl_source_set(PWRCTRL_PWRSRC_DCDC);
lpm_init();
board_init();
/* Enable flash cache and prefetch. */
ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_ENABLED);
ti_lib_vims_configure(VIMS_BASE, true, true);
gpio_interrupt_init();
/* Clock must always be enabled for the semaphore module */
HWREG(AUX_WUC_BASE + AUX_WUC_O_MODCLKEN1) = AUX_WUC_MODCLKEN1_SMPH;
leds_init();
fade(LEDS_RED);
cc26xx_rtc_init();
clock_init();
rtimer_init();
watchdog_init();
process_init();
random_init(0x1234);
/* Character I/O Initialisation */
#if CC26XX_UART_CONF_ENABLE
cc26xx_uart_init();
cc26xx_uart_set_input(serial_line_input_byte);
#endif
serial_line_init();
printf("Starting " CONTIKI_VERSION_STRING "\n");
printf("With DriverLib v%u.%02u.%02u.%u\n", DRIVERLIB_MAJOR_VER,
DRIVERLIB_MINOR_VER, DRIVERLIB_PATCH_VER, DRIVERLIB_BUILD_ID);
printf(BOARD_STRING " using CC%u\n", CC26XX_MODEL_CPU_VARIANT);
process_start(&etimer_process, NULL);
ctimer_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
fade(LEDS_YELLOW);
printf(" Net: ");
printf("%s\n", NETSTACK_NETWORK.name);
printf(" MAC: ");
printf("%s\n", NETSTACK_MAC.name);
printf(" RDC: ");
printf("%s", NETSTACK_RDC.name);
if(NETSTACK_RDC.channel_check_interval() != 0) {
printf(", Channel Check Interval: %u ticks",
NETSTACK_RDC.channel_check_interval());
}
printf("\n");
netstack_init();
set_rf_params();
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, &linkaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
fade(LEDS_GREEN);
process_start(&sensors_process, NULL);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_ORANGE);
while(1) {
uint8_t r;
do {
r = process_run();
watchdog_periodic();
} while(r > 0);
/* Drop to some low power mode */
lpm_drop();
}
}
/**
* \brief Main function for CC26xx-based platforms
*
* The same main() is used for all supported boards
*/
int
main(void)
{
/* Enable flash cache and prefetch. */
ti_lib_vims_mode_set(VIMS_BASE, VIMS_MODE_ENABLED);
ti_lib_vims_configure(VIMS_BASE, true, true);
ti_lib_int_master_disable();
/* Set the LF XOSC as the LF system clock source */
oscillators_select_lf_xosc();
lpm_init();
board_init();
gpio_interrupt_init();
leds_init();
/*
* Disable I/O pad sleep mode and open I/O latches in the AON IOC interface
* This is only relevant when returning from shutdown (which is what froze
* latches in the first place. Before doing these things though, we should
* allow software to first regain control of pins
*/
ti_lib_pwr_ctrl_io_freeze_disable();
fade(LEDS_RED);
ti_lib_int_master_enable();
soc_rtc_init();
clock_init();
rtimer_init();
watchdog_init();
process_init();
random_init(0x1234);
/* Character I/O Initialisation */
#if CC26XX_UART_CONF_ENABLE
cc26xx_uart_init();
#endif
serial_line_init();
printf("Starting " CONTIKI_VERSION_STRING "\n\r");
printf("With DriverLib v%u.%u\n\r", DRIVERLIB_RELEASE_GROUP,
DRIVERLIB_RELEASE_BUILD);
printf(BOARD_STRING "\n\r");
process_start(&etimer_process, NULL);
ctimer_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
fade(LEDS_YELLOW);
printf(" Net: ");
printf("%s\n\r", NETSTACK_NETWORK.name);
printf(" MAC: ");
printf("%s\n\r", NETSTACK_MAC.name);
printf(" RDC: ");
printf("%s", NETSTACK_RDC.name);
if(NETSTACK_RDC.channel_check_interval() != 0) {
printf(", Channel Check Interval: %u ticks",
NETSTACK_RDC.channel_check_interval());
}
printf("\n\r");
netstack_init();
set_rf_params();
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, &linkaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
fade(LEDS_GREEN);
process_start(&sensors_process, NULL);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_ORANGE);
while(1) {
uint8_t r;
do {
r = process_run();
watchdog_periodic();
} while(r > 0);
/* Drop to some low power mode */
lpm_drop();
}
}
/*---------------------------------------------------------------------------*/
int
main(void)
{
/*
* Initialize hardware.
*/
halInit();
clock_init();
uart1_init(115200);
// Led initialization
leds_init();
INTERRUPTS_ON();
PRINTF("\r\nStarting ");
PRINTF(CONTIKI_VERSION_STRING);
PRINTF(" on %s\r\n",boardDescription->name);
/*
* Initialize Contiki and our processes.
*/
process_init();
#if WITH_SERIAL_LINE_INPUT
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
//etimer_process should be started before ctimer init
process_start(&etimer_process, NULL);
//ctimer and rtimer should be initialized before netstack to enable RDC (cxmac, contikimac, lpp)
ctimer_init();
rtimer_init();
netstack_init();
#if !UIP_CONF_IPV6
ST_RadioEnableAutoAck(FALSE); // Because frames are not 802.15.4 compatible.
ST_RadioEnableAddressFiltering(FALSE);
#endif
set_rime_addr();
procinit_init();
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
while(1){
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
ENERGEST_OFF(ENERGEST_TYPE_CPU);
//watchdog_stop();
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* Go to idle mode. */
halSleepWithOptions(SLEEPMODE_IDLE,0);
/* We are awake. */
//watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
clock_wait(2);
uart1_init(115200); /* Must come before first printf */
#if WITH_UIP
slip_arch_init(115200);
#endif /* WITH_UIP */
clock_wait(1);
leds_on(LEDS_GREEN);
//ds2411_init();
/* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
cannot be odd. */
//ds2411_id[2] &= 0xfe;
leds_on(LEDS_BLUE);
//xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
node_id = NODE_ID;
/* Restore node id if such has been stored in external mem */
//node_id_restore();
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
//memcpy(ds2411_id, ieee, sizeof(uip_lladdr.addr));
//ds2411_id[7] = node_id & 0xff;
}
#endif
//random_init(ds2411_id[0] + node_id);
leds_off(LEDS_BLUE);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
init_platform();
set_rime_addr();
cc2520_init();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (rimeaddr_node_addr.u8[0] << 8) +
rimeaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2520_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
cc2520_set_channel(RF_CHANNEL);
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
#if WITH_UIP6
/* memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr)); */
memcpy(&uip_lladdr.addr, rimeaddr_node_addr.u8,
UIP_LLADDR_LEN > RIMEADDR_SIZE ? RIMEADDR_SIZE : UIP_LLADDR_LEN);
/* Setup nullmac-like MAC for 802.15.4 */
/* sicslowpan_init(sicslowmac_init(&cc2520_driver)); */
/* printf(" %s channel %u\n", sicslowmac_driver.name, RF_CHANNEL); */
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* WITH_UIP6 */
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
printf("%s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
RF_CHANNEL);
#endif /* WITH_UIP6 */
#if !WITH_UIP && !WITH_UIP6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
leds_off(LEDS_GREEN);
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level((rimeaddr_node_addr.u8[0] << 4) + 16);
#endif /* TIMESYNCH_CONF_ENABLED */
#if WITH_UIP
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172,16,
rimeaddr_node_addr.u8[0],rimeaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
printf("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* WITH_UIP */
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
watchdog_start();
/* Stop the watchdog */
watchdog_stop();
#if !PROCESS_CONF_NO_PROCESS_NAMES
print_processes(autostart_processes);
#else /* !PROCESS_CONF_NO_PROCESS_NAMES */
putchar('\n'); /* include putchar() */
#endif /* !PROCESS_CONF_NO_PROCESS_NAMES */
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_OFF(ENERGEST_TYPE_CPU);
ENERGEST_ON(ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_OFF(ENERGEST_TYPE_LPM);
ENERGEST_ON(ENERGEST_TYPE_CPU);
}
}
}
/*---------------------------------------------------------------------------*/
#if WITH_TINYOS_AUTO_IDS
uint16_t TOS_NODE_ID = 0x1234; /* non-zero */
uint16_t TOS_LOCAL_ADDRESS = 0x1234; /* non-zero */
#endif /* WITH_TINYOS_AUTO_IDS */
int
main(int argc, char **argv)
{
/*
* Initalize hardware.
*/
msp430_cpu_init();
clock_init();
leds_init();
leds_on(LEDS_RED);
uart1_init(BAUD2UBR(115200)); /* Must come before first printf */
leds_on(LEDS_GREEN);
ds2411_init();
/* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
cannot be odd. */
ds2411_id[2] &= 0xfe;
leds_on(LEDS_BLUE);
xmem_init();
leds_off(LEDS_RED);
rtimer_init();
/*
* Hardware initialization done!
*/
/* Initialize energest first (but after rtimer)
*/
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
#if WITH_TINYOS_AUTO_IDS
node_id = TOS_NODE_ID;
#else /* WITH_TINYOS_AUTO_IDS */
/* Restore node id if such has been stored in external mem */
node_id_restore();
#endif /* WITH_TINYOS_AUTO_IDS */
/* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
{
uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
memcpy(ds2411_id, ieee, sizeof(uip_lladdr.addr));
ds2411_id[7] = node_id & 0xff;
}
#endif
random_init(ds2411_id[0] + node_id);
leds_off(LEDS_BLUE);
/*
* Initialize Contiki and our processes.
*/
process_init();
process_start(&etimer_process, NULL);
ctimer_init();
#if NETSTACK_CONF_WITH_IPV4
slip_arch_init(BAUD2UBR(115200));
#endif /* NETSTACK_CONF_WITH_IPV4 */
init_platform();
set_rime_addr();
cc2420_init();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
PRINTF("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
}
PRINTF(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
PRINTF("Node id is set to %u.\n", node_id);
} else {
PRINTF("Node id is not set.\n");
}
/* PRINTF("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
ds2411_id[0], ds2411_id[1], ds2411_id[2], ds2411_id[3],
ds2411_id[4], ds2411_id[5], ds2411_id[6], ds2411_id[7]);*/
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, ds2411_id, sizeof(uip_lladdr.addr));
/* Setup nullmac-like MAC for 802.15.4 */
/* sicslowpan_init(sicslowmac_init(&cc2420_driver)); */
/* PRINTF(" %s channel %u\n", sicslowmac_driver.name, CC2420_CONF_CCA_THRESH); */
/* Setup X-MAC for 802.15.4 */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_LLSEC.init();
NETSTACK_NETWORK.init();
PRINTF("%s %s %s, channel check rate %lu Hz, radio channel %u, CCA threshold %i\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL,
CC2420_CONF_CCA_THRESH);
process_start(&tcpip_process, NULL);
#if DEBUG
PRINTF("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
PRINTF("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
PRINTF("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
}
#endif /* DEBUG */
if(!UIP_CONF_IPV6_RPL) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
PRINTF("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
PRINTF("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
PRINTF("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
#else /* NETSTACK_CONF_WITH_IPV6 */
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_LLSEC.init();
NETSTACK_NETWORK.init();
PRINTF("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
NETSTACK_RDC.channel_check_interval()),
CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
uart1_set_input(serial_line_input_byte);
serial_line_init();
#endif
leds_off(LEDS_GREEN);
#if TIMESYNCH_CONF_ENABLED
timesynch_init();
timesynch_set_authority_level((linkaddr_node_addr.u8[0] << 4) + 16);
#endif /* TIMESYNCH_CONF_ENABLED */
#if NETSTACK_CONF_WITH_IPV4
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL); /* Start IP output */
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
{
uip_ipaddr_t hostaddr, netmask;
uip_init();
uip_ipaddr(&hostaddr, 172,16,
linkaddr_node_addr.u8[0],linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
/* uip_fw_register(&slipif);*/
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
PRINTF("uIP started with IP address %d.%d.%d.%d\n",
uip_ipaddr_to_quad(&hostaddr));
}
#endif /* NETSTACK_CONF_WITH_IPV4 */
watchdog_start();
#if !PROCESS_CONF_NO_PROCESS_NAMES
print_processes(autostart_processes);
#endif /* !PROCESS_CONF_NO_PROCESS_NAMES */
autostart_start(autostart_processes);
/*
* This is the scheduler loop.
*/
#if DCOSYNCH_CONF_ENABLED
timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
/* watchdog_stop();*/
while(1) {
int r;
do {
/* Reset watchdog. */
watchdog_periodic();
r = process_run();
} while(r > 0);
/*
* Idle processing.
*/
int s = splhigh(); /* Disable interrupts. */
/* uart1_active is for avoiding LPM3 when still sending or receiving */
if(process_nevents() != 0 || uart1_active()) {
splx(s); /* Re-enable interrupts. */
} else {
static unsigned long irq_energest = 0;
#if DCOSYNCH_CONF_ENABLED
/* before going down to sleep possibly do some management */
if(timer_expired(&mgt_timer)) {
watchdog_periodic();
timer_reset(&mgt_timer);
msp430_sync_dco();
#if CC2420_CONF_SFD_TIMESTAMPS
cc2420_arch_sfd_init();
#endif /* CC2420_CONF_SFD_TIMESTAMPS */
}
#endif
/* Re-enable interrupts and go to sleep atomically. */
ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
/* We only want to measure the processing done in IRQs when we
are asleep, so we discard the processing time done when we
were awake. */
energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
watchdog_stop();
/* check if the DCO needs to be on - if so - only LPM 1 */
if (msp430_dco_required) {
_BIS_SR(GIE | CPUOFF); /* LPM1 sleep for DMA to work!. */
} else {
_BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
statement will block
until the CPU is
woken up by an
interrupt that sets
the wake up flag. */
}
/* We get the current processing time for interrupts that was
done during the LPM and store it for next time around. */
dint();
irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
eint();
watchdog_start();
ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
}
}
return 0;
}
/**
* \brief Main routine for the OpenMote-CC2538 platforms
*/
int
main(void)
{
nvic_init();
ioc_init();
sys_ctrl_init();
clock_init();
lpm_init();
rtimer_init();
gpio_init();
leds_init();
fade(LEDS_RED);
process_init();
watchdog_init();
#if UART_CONF_ENABLE
uart_init(0);
uart_init(1);
uart_set_input(SERIAL_LINE_CONF_UART, serial_line_input_byte);
#endif
#if USB_SERIAL_CONF_ENABLE
usb_serial_init();
usb_serial_set_input(serial_line_input_byte);
#endif
i2c_init(I2C_SDA_PORT, I2C_SDA_PIN, I2C_SCL_PORT, I2C_SCL_PIN, I2C_SCL_NORMAL_BUS_SPEED);
serial_line_init();
INTERRUPTS_ENABLE();
fade(LEDS_BLUE);
PUTS(CONTIKI_VERSION_STRING);
PUTS(BOARD_STRING);
#if STARTUP_CONF_VERBOSE
soc_print_info();
#endif
random_init(0);
udma_init();
process_start(&etimer_process, NULL);
ctimer_init();
board_init();
#if CRYPTO_CONF_INIT
crypto_init();
crypto_disable();
#endif
netstack_init();
set_rf_params();
PRINTF("Net: ");
PRINTF("%s\n", NETSTACK_NETWORK.name);
PRINTF("MAC: ");
PRINTF("%s\n", NETSTACK_MAC.name);
PRINTF("RDC: ");
PRINTF("%s\n", NETSTACK_RDC.name);
#if NETSTACK_CONF_WITH_IPV6
memcpy(&uip_lladdr.addr, &linkaddr_node_addr, sizeof(uip_lladdr.addr));
queuebuf_init();
process_start(&tcpip_process, NULL);
#endif /* NETSTACK_CONF_WITH_IPV6 */
process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);
energest_init();
ENERGEST_ON(ENERGEST_TYPE_CPU);
autostart_start(autostart_processes);
watchdog_start();
fade(LEDS_GREEN);
while(1) {
uint8_t r;
do {
watchdog_periodic();
r = process_run();
} while(r > 0);
lpm_enter();
}
}