static void esb_remove(struct pci_dev *pdev)
{
	/* Stop the timer before we leave */
	if (!nowayout)
		esb_timer_stop();

	/* Deregister */
	misc_deregister(&esb_miscdev);
	iounmap(BASEADDR);
	pci_release_region(esb_pci, 0);
	pci_disable_device(esb_pci);
	esb_pci = NULL;
}
static int esb_release(struct inode *inode, struct file *file)
{
	/* Shut off the timer. */
	if (esb_expect_close == 42)
		esb_timer_stop();
	else {
		pr_crit("Unexpected close, not stopping watchdog!\n");
		esb_timer_keepalive();
	}
	clear_bit(0, &timer_alive);
	esb_expect_close = 0;
	return 0;
}
Beispiel #3
0
static int esb_release(struct inode *inode, struct file *file)
{
	/* Shut off the timer. */
	if (esb_expect_close == 42)
		esb_timer_stop();
	else {
//		printk(KERN_CRIT PFX
;
		esb_timer_keepalive();
	}
	clear_bit(0, &timer_alive);
	esb_expect_close = 0;
	return 0;
}
static void esb_shutdown(struct pci_dev *pdev)
{
	esb_timer_stop();
}
static long esb_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
	int new_options, retval = -EINVAL;
	int new_heartbeat;
	void __user *argp = (void __user *)arg;
	int __user *p = argp;
	static const struct watchdog_info ident = {
		.options =		WDIOF_SETTIMEOUT |
					WDIOF_KEEPALIVEPING |
					WDIOF_MAGICCLOSE,
		.firmware_version =	0,
		.identity =		ESB_MODULE_NAME,
	};

	switch (cmd) {
	case WDIOC_GETSUPPORT:
		return copy_to_user(argp, &ident,
					sizeof(ident)) ? -EFAULT : 0;

	case WDIOC_GETSTATUS:
		return put_user(0, p);

	case WDIOC_GETBOOTSTATUS:
		return put_user(triggered, p);

	case WDIOC_SETOPTIONS:
	{
		if (get_user(new_options, p))
			return -EFAULT;

		if (new_options & WDIOS_DISABLECARD) {
			esb_timer_stop();
			retval = 0;
		}

		if (new_options & WDIOS_ENABLECARD) {
			esb_timer_start();
			retval = 0;
		}
		return retval;
	}
	case WDIOC_KEEPALIVE:
		esb_timer_keepalive();
		return 0;

	case WDIOC_SETTIMEOUT:
	{
		if (get_user(new_heartbeat, p))
			return -EFAULT;
		if (esb_timer_set_heartbeat(new_heartbeat))
			return -EINVAL;
		esb_timer_keepalive();
		/* Fall */
	}
	case WDIOC_GETTIMEOUT:
		return put_user(heartbeat, p);
	default:
		return -ENOTTY;
	}
}

/*
 *      Kernel Interfaces
 */

static const struct file_operations esb_fops = {
	.owner = THIS_MODULE,
	.llseek = no_llseek,
	.write = esb_write,
	.unlocked_ioctl = esb_ioctl,
	.open = esb_open,
	.release = esb_release,
};

static struct miscdevice esb_miscdev = {
	.minor = WATCHDOG_MINOR,
	.name = "watchdog",
	.fops = &esb_fops,
};

/*
 * Data for PCI driver interface
 */
static DEFINE_PCI_DEVICE_TABLE(esb_pci_tbl) = {
	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_9), },
	{ 0, },                 /* End of list */
};
MODULE_DEVICE_TABLE(pci, esb_pci_tbl);

/*
 *      Init & exit routines
 */

static unsigned char esb_getdevice(struct pci_dev *pdev)
{
	if (pci_enable_device(pdev)) {
		pr_err("failed to enable device\n");
		goto err_devput;
	}

	if (pci_request_region(pdev, 0, ESB_MODULE_NAME)) {
		pr_err("failed to request region\n");
		goto err_disable;
	}

	BASEADDR = pci_ioremap_bar(pdev, 0);
	if (BASEADDR == NULL) {
		/* Something's wrong here, BASEADDR has to be set */
		pr_err("failed to get BASEADDR\n");
		goto err_release;
	}

	/* Done */
	esb_pci = pdev;
	return 1;

err_release:
	pci_release_region(pdev, 0);
err_disable:
	pci_disable_device(pdev);
err_devput:
	return 0;
}

static void esb_initdevice(void)
{
	u8 val1;
	u16 val2;

	/*
	 * Config register:
	 * Bit    5 : 0 = Enable WDT_OUTPUT
	 * Bit    2 : 0 = set the timer frequency to the PCI clock
	 * divided by 2^15 (approx 1KHz).
	 * Bits 1:0 : 11 = WDT_INT_TYPE Disabled.
	 * The watchdog has two timers, it can be setup so that the
	 * expiry of timer1 results in an interrupt and the expiry of
	 * timer2 results in a reboot. We set it to not generate
	 * any interrupts as there is not much we can do with it
	 * right now.
	 */
	pci_write_config_word(esb_pci, ESB_CONFIG_REG, 0x0003);

	/* Check that the WDT isn't already locked */
	pci_read_config_byte(esb_pci, ESB_LOCK_REG, &val1);
	if (val1 & ESB_WDT_LOCK)
		pr_warn("nowayout already set\n");

	/* Set the timer to watchdog mode and disable it for now */
	pci_write_config_byte(esb_pci, ESB_LOCK_REG, 0x00);

	/* Check if the watchdog was previously triggered */
	esb_unlock_registers();
	val2 = readw(ESB_RELOAD_REG);
	if (val2 & ESB_WDT_TIMEOUT)
		triggered = WDIOF_CARDRESET;

	/* Reset WDT_TIMEOUT flag and timers */
	esb_unlock_registers();
	writew((ESB_WDT_TIMEOUT | ESB_WDT_RELOAD), ESB_RELOAD_REG);

	/* And set the correct timeout value */
	esb_timer_set_heartbeat(heartbeat);
}

static int esb_probe(struct pci_dev *pdev,
		const struct pci_device_id *ent)
{
	int ret;

	cards_found++;
	if (cards_found == 1)
		pr_info("Intel 6300ESB WatchDog Timer Driver v%s\n",
			ESB_VERSION);

	if (cards_found > 1) {
		pr_err("This driver only supports 1 device\n");
		return -ENODEV;
	}

	/* Check whether or not the hardware watchdog is there */
	if (!esb_getdevice(pdev) || esb_pci == NULL)
		return -ENODEV;

	/* Check that the heartbeat value is within it's range;
	   if not reset to the default */
	if (heartbeat < 0x1 || heartbeat > 2 * 0x03ff) {
		heartbeat = WATCHDOG_HEARTBEAT;
		pr_info("heartbeat value must be 1<heartbeat<2046, using %d\n",
			heartbeat);
	}

	/* Initialize the watchdog and make sure it does not run */
	esb_initdevice();

	/* Register the watchdog so that userspace has access to it */
	ret = misc_register(&esb_miscdev);
	if (ret != 0) {
		pr_err("cannot register miscdev on minor=%d (err=%d)\n",
		       WATCHDOG_MINOR, ret);
		goto err_unmap;
	}
	pr_info("initialized (0x%p). heartbeat=%d sec (nowayout=%d)\n",
		BASEADDR, heartbeat, nowayout);
	return 0;

err_unmap:
	iounmap(BASEADDR);
	pci_release_region(esb_pci, 0);
	pci_disable_device(esb_pci);
	esb_pci = NULL;
	return ret;
}