static int spl_fit_append_fdt(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector,
void *fit, int images, ulong base_offset)
{
struct spl_image_info image_info;
int node, ret;
/* Figure out which device tree the board wants to use */
node = spl_fit_get_image_node(fit, images, FIT_FDT_PROP, 0);
if (node < 0) {
debug("%s: cannot find FDT node\n", __func__);
return node;
}
/*
* Read the device tree and place it after the image.
* Align the destination address to ARCH_DMA_MINALIGN.
*/
image_info.load_addr = spl_image->load_addr + spl_image->size;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
return ret;
/* Make the load-address of the FDT available for the SPL framework */
spl_image->fdt_addr = (void *)image_info.load_addr;
#if !CONFIG_IS_ENABLED(FIT_IMAGE_TINY)
/* Try to make space, so we can inject details on the loadables */
ret = fdt_shrink_to_minimum(spl_image->fdt_addr, 8192);
#endif
return ret;
}
void spl_fixup_fdt(void)
{
#if defined(CONFIG_SPL_OF_LIBFDT) && defined(CONFIG_SYS_SPL_ARGS_ADDR)
void *fdt_blob = (void *)CONFIG_SYS_SPL_ARGS_ADDR;
int err;
err = fdt_check_header(fdt_blob);
if (err < 0) {
printf("fdt_root: %s\n", fdt_strerror(err));
return;
}
/* fixup the memory dt node */
err = fdt_shrink_to_minimum(fdt_blob, 0);
if (err == 0) {
printf("spl: fdt_shrink_to_minimum err - %d\n", err);
return;
}
err = arch_fixup_fdt(fdt_blob);
if (err) {
printf("spl: arch_fixup_fdt err - %d\n", err);
return;
}
#endif
}
int ft_board_setup(void *blob, bd_t *bd)
{
u32 baseboard_rev;
int nodeoffset;
uint8_t enetaddr[6];
char baseboard_name[16];
int err;
fdt_shrink_to_minimum(blob, 0); /* Make room for new properties */
/* MAC addr */
if (eth_env_get_enetaddr("ethaddr", enetaddr)) {
fdt_find_and_setprop(blob,
"/soc/aips-bus@02100000/ethernet@02188000",
"local-mac-address", enetaddr, 6, 1);
}
if (eth_env_get_enetaddr("eth1addr", enetaddr)) {
fdt_find_and_setprop(blob, "/eth@pcie", "local-mac-address",
enetaddr, 6, 1);
}
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
baseboard_rev = cl_eeprom_get_board_rev(0);
err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
if (err || baseboard_rev == 0)
return 0; /* Assume not an early revision SB-FX6m baseboard */
if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
fdt_delprop(blob, nodeoffset, "cd-gpios");
fdt_find_and_setprop(blob, USDHC3_PATH, "broken-cd",
NULL, 0, 1);
fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
NULL, 0, 1);
}
return 0;
}
int image_setup_libfdt(bootm_headers_t *images, void *blob,
int of_size, struct lmb *lmb)
{
ulong *initrd_start = &images->initrd_start;
ulong *initrd_end = &images->initrd_end;
int ret = -EPERM;
int fdt_ret;
if (fdt_root(blob) < 0) {
printf("ERROR: root node setup failed\n");
goto err;
}
if (fdt_chosen(blob) < 0) {
printf("ERROR: /chosen node create failed\n");
goto err;
}
if (arch_fixup_fdt(blob) < 0) {
printf("ERROR: arch-specific fdt fixup failed\n");
goto err;
}
if (IMAGE_OF_BOARD_SETUP) {
fdt_ret = ft_board_setup(blob, gd->bd);
if (fdt_ret) {
printf("ERROR: board-specific fdt fixup failed: %s\n",
fdt_strerror(fdt_ret));
goto err;
}
}
if (IMAGE_OF_SYSTEM_SETUP) {
fdt_ret = ft_system_setup(blob, gd->bd);
if (fdt_ret) {
printf("ERROR: system-specific fdt fixup failed: %s\n",
fdt_strerror(fdt_ret));
goto err;
}
}
fdt_fixup_ethernet(blob);
/* Delete the old LMB reservation */
lmb_free(lmb, (phys_addr_t)(u32)(uintptr_t)blob,
(phys_size_t)fdt_totalsize(blob));
ret = fdt_shrink_to_minimum(blob);
if (ret < 0)
goto err;
of_size = ret;
if (*initrd_start && *initrd_end) {
of_size += FDT_RAMDISK_OVERHEAD;
fdt_set_totalsize(blob, of_size);
}
/* Create a new LMB reservation */
lmb_reserve(lmb, (ulong)blob, of_size);
fdt_initrd(blob, *initrd_start, *initrd_end);
if (!ft_verify_fdt(blob))
goto err;
#if defined(CONFIG_SOC_KEYSTONE)
if (IMAGE_OF_BOARD_SETUP)
ft_board_setup_ex(blob, gd->bd);
#endif
return 0;
err:
printf(" - must RESET the board to recover.\n\n");
return ret;
}