Beispiel #1
0
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
    int asnum, struct usb_host_interface *ifp, int num_ep,
    unsigned char *buffer, int size)
{
	unsigned char *buffer0 = buffer;
	struct usb_endpoint_descriptor *d;
	struct usb_host_endpoint *endpoint;
	int n, i;

	d = (struct usb_endpoint_descriptor *) buffer;
	buffer += d->bLength;
	size -= d->bLength;

	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
		n = USB_DT_ENDPOINT_AUDIO_SIZE;
	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
		n = USB_DT_ENDPOINT_SIZE;
	else {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint descriptor of length %d, skipping\n",
		    cfgno, inum, asnum, d->bLength);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
	if (i >= 16 || i == 0) {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint with address 0x%X, skipping\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	/* Only store as many endpoints as we have room for */
	if (ifp->desc.bNumEndpoints >= num_ep)
		goto skip_to_next_endpoint_or_interface_descriptor;

	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
	++ifp->desc.bNumEndpoints;

	memcpy(&endpoint->desc, d, n);
	le16_to_cpus(&endpoint->desc.wMaxPacketSize);

	/* Skip over any Class Specific or Vendor Specific descriptors;
	 * find the next endpoint or interface descriptor */
	endpoint->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, &n);
	endpoint->extralen = i;
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "endpoint");
	return buffer - buffer0 + i;

skip_to_next_endpoint_or_interface_descriptor:
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, NULL);
	return buffer - buffer0 + i;
}
Beispiel #2
0
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
    int asnum, struct usb_host_interface *ifp, int num_ep,
    unsigned char *buffer, int size)
{
	unsigned char *buffer0 = buffer;
	struct usb_endpoint_descriptor *d;
	struct usb_host_endpoint *endpoint;
	int n, i, j;

	d = (struct usb_endpoint_descriptor *) buffer;
	buffer += d->bLength;
	size -= d->bLength;

	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
		n = USB_DT_ENDPOINT_AUDIO_SIZE;
	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
		n = USB_DT_ENDPOINT_SIZE;
	else {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint descriptor of length %d, skipping\n",
		    cfgno, inum, asnum, d->bLength);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
	if (i >= 16 || i == 0) {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint with address 0x%X, skipping\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	/* Only store as many endpoints as we have room for */
	if (ifp->desc.bNumEndpoints >= num_ep)
		goto skip_to_next_endpoint_or_interface_descriptor;

	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
	++ifp->desc.bNumEndpoints;

	memcpy(&endpoint->desc, d, n);
	INIT_LIST_HEAD(&endpoint->urb_list);

	/* Fix up bInterval values outside the legal range. Use 32 ms if no
	 * proper value can be guessed. */
	i = 0;		/* i = min, j = max, n = default */
	j = 255;
	if (usb_endpoint_xfer_int(d)) {
		i = 1;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_HIGH:
			/* Many device manufacturers are using full-speed
			 * bInterval values in high-speed interrupt endpoint
			 * descriptors. Try to fix those and fall back to a
			 * 32 ms default value otherwise. */
			n = fls(d->bInterval*8);
			if (n == 0)
				n = 9;	/* 32 ms = 2^(9-1) uframes */
			j = 16;
			break;
		default:		/* USB_SPEED_FULL or _LOW */
			/* For low-speed, 10 ms is the official minimum.
			 * But some "overclocked" devices might want faster
			 * polling so we'll allow it. */
			n = 32;
			break;
		}
	} else if (usb_endpoint_xfer_isoc(d)) {
		i = 1;
		j = 16;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_HIGH:
			n = 9;		/* 32 ms = 2^(9-1) uframes */
			break;
		default:		/* USB_SPEED_FULL */
			n = 6;		/* 32 ms = 2^(6-1) frames */
			break;
		}
	}
	if (d->bInterval < i || d->bInterval > j) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X has an invalid bInterval %d, "
		    "changing to %d\n",
		    cfgno, inum, asnum,
		    d->bEndpointAddress, d->bInterval, n);
		endpoint->desc.bInterval = n;
	}

	/* Some buggy low-speed devices have Bulk endpoints, which is
	 * explicitly forbidden by the USB spec.  In an attempt to make
	 * them usable, we will try treating them as Interrupt endpoints.
	 */
	if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
			usb_endpoint_xfer_bulk(d)) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X is Bulk; changing to Interrupt\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
		endpoint->desc.bInterval = 1;
		if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
	}

	/* Skip over any Class Specific or Vendor Specific descriptors;
	 * find the next endpoint or interface descriptor */
	endpoint->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, &n);
	endpoint->extralen = i;
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "endpoint");
	return buffer - buffer0 + i;

skip_to_next_endpoint_or_interface_descriptor:
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, NULL);
	return buffer - buffer0 + i;
}
Beispiel #3
0
static int usb_parse_configuration(struct device *ddev, int cfgidx,
    struct usb_host_config *config, unsigned char *buffer, int size)
{
	unsigned char *buffer0 = buffer;
	int cfgno;
	int nintf, nintf_orig;
	int i, j, n;
	struct usb_interface_cache *intfc;
	unsigned char *buffer2;
	int size2;
	struct usb_descriptor_header *header;
	int len, retval;
	u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
	unsigned iad_num = 0;

	memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
	if (config->desc.bDescriptorType != USB_DT_CONFIG ||
	    config->desc.bLength < USB_DT_CONFIG_SIZE) {
		dev_err(ddev, "invalid descriptor for config index %d: "
		    "type = 0x%X, length = %d\n", cfgidx,
		    config->desc.bDescriptorType, config->desc.bLength);
		return -EINVAL;
	}
	cfgno = config->desc.bConfigurationValue;

	buffer += config->desc.bLength;
	size -= config->desc.bLength;

	nintf = nintf_orig = config->desc.bNumInterfaces;
	if (nintf > USB_MAXINTERFACES) {
		dev_warn(ddev, "config %d has too many interfaces: %d, "
		    "using maximum allowed: %d\n",
		    cfgno, nintf, USB_MAXINTERFACES);
		nintf = USB_MAXINTERFACES;
	}

	/* Go through the descriptors, checking their length and counting the
	 * number of altsettings for each interface */
	n = 0;
	for ((buffer2 = buffer, size2 = size);
	      size2 > 0;
	     (buffer2 += header->bLength, size2 -= header->bLength)) {

		if (size2 < sizeof(struct usb_descriptor_header)) {
			dev_warn(ddev, "config %d descriptor has %d excess "
			    "byte%s, ignoring\n",
			    cfgno, size2, plural(size2));
			break;
		}

		header = (struct usb_descriptor_header *) buffer2;
		if ((header->bLength > size2) || (header->bLength < 2)) {
			dev_warn(ddev, "config %d has an invalid descriptor "
			    "of length %d, skipping remainder of the config\n",
			    cfgno, header->bLength);
			break;
		}

		if (header->bDescriptorType == USB_DT_INTERFACE) {
			struct usb_interface_descriptor *d;
			int inum;

			d = (struct usb_interface_descriptor *) header;
			if (d->bLength < USB_DT_INTERFACE_SIZE) {
				dev_warn(ddev, "config %d has an invalid "
				    "interface descriptor of length %d, "
				    "skipping\n", cfgno, d->bLength);
				continue;
			}

			inum = d->bInterfaceNumber;
			if (inum >= nintf_orig)
				dev_warn(ddev, "config %d has an invalid "
				    "interface number: %d but max is %d\n",
				    cfgno, inum, nintf_orig - 1);

			/* Have we already encountered this interface?
			 * Count its altsettings */
			for (i = 0; i < n; ++i) {
				if (inums[i] == inum)
					break;
			}
			if (i < n) {
				if (nalts[i] < 255)
					++nalts[i];
			} else if (n < USB_MAXINTERFACES) {
				inums[n] = inum;
				nalts[n] = 1;
				++n;
			}

		} else if (header->bDescriptorType ==
				USB_DT_INTERFACE_ASSOCIATION) {
			if (iad_num == USB_MAXIADS) {
				dev_warn(ddev, "found more Interface "
					       "Association Descriptors "
					       "than allocated for in "
					       "configuration %d\n", cfgno);
			} else {
				config->intf_assoc[iad_num] =
					(struct usb_interface_assoc_descriptor
					*)header;
				iad_num++;
			}

		} else if (header->bDescriptorType == USB_DT_DEVICE ||
			    header->bDescriptorType == USB_DT_CONFIG)
			dev_warn(ddev, "config %d contains an unexpected "
			    "descriptor of type 0x%X, skipping\n",
			    cfgno, header->bDescriptorType);

	}	/* for ((buffer2 = buffer, size2 = size); ...) */
	size = buffer2 - buffer;
	config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);

	if (n != nintf)
		dev_warn(ddev, "config %d has %d interface%s, different from "
		    "the descriptor's value: %d\n",
		    cfgno, n, plural(n), nintf_orig);
	else if (n == 0)
		dev_warn(ddev, "config %d has no interfaces?\n", cfgno);
	config->desc.bNumInterfaces = nintf = n;

	/* Check for missing interface numbers */
	for (i = 0; i < nintf; ++i) {
		for (j = 0; j < nintf; ++j) {
			if (inums[j] == i)
				break;
		}
		if (j >= nintf)
			dev_warn(ddev, "config %d has no interface number "
			    "%d\n", cfgno, i);
	}

	/* Allocate the usb_interface_caches and altsetting arrays */
	for (i = 0; i < nintf; ++i) {
		j = nalts[i];
		if (j > USB_MAXALTSETTING) {
			dev_warn(ddev, "too many alternate settings for "
			    "config %d interface %d: %d, "
			    "using maximum allowed: %d\n",
			    cfgno, inums[i], j, USB_MAXALTSETTING);
			nalts[i] = j = USB_MAXALTSETTING;
		}

		len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
		config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
		if (!intfc)
			return -ENOMEM;
		kref_init(&intfc->ref);
	}

	/* Skip over any Class Specific or Vendor Specific descriptors;
	 * find the first interface descriptor */
	config->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
	    USB_DT_INTERFACE, &n);
	config->extralen = i;
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "configuration");
	buffer += i;
	size -= i;

	/* Parse all the interface/altsetting descriptors */
	while (size > 0) {
		retval = usb_parse_interface(ddev, cfgno, config,
		    buffer, size, inums, nalts);
		if (retval < 0)
			return retval;

		buffer += retval;
		size -= retval;
	}

	/* Check for missing altsettings */
	for (i = 0; i < nintf; ++i) {
		intfc = config->intf_cache[i];
		for (j = 0; j < intfc->num_altsetting; ++j) {
			for (n = 0; n < intfc->num_altsetting; ++n) {
				if (intfc->altsetting[n].desc.
				    bAlternateSetting == j)
					break;
			}
			if (n >= intfc->num_altsetting)
				dev_warn(ddev, "config %d interface %d has no "
				    "altsetting %d\n", cfgno, inums[i], j);
		}
	}

	return 0;
}
Beispiel #4
0
static int usb_parse_interface(struct device *ddev, int cfgno,
    struct usb_host_config *config, unsigned char *buffer, int size,
    u8 inums[], u8 nalts[])
{
	unsigned char *buffer0 = buffer;
	struct usb_interface_descriptor	*d;
	int inum, asnum;
	struct usb_interface_cache *intfc;
	struct usb_host_interface *alt;
	int i, n;
	int len, retval;
	int num_ep, num_ep_orig;

	d = (struct usb_interface_descriptor *) buffer;
	buffer += d->bLength;
	size -= d->bLength;

	if (d->bLength < USB_DT_INTERFACE_SIZE)
		goto skip_to_next_interface_descriptor;

	/* Which interface entry is this? */
	intfc = NULL;
	inum = d->bInterfaceNumber;
	for (i = 0; i < config->desc.bNumInterfaces; ++i) {
		if (inums[i] == inum) {
			intfc = config->intf_cache[i];
			break;
		}
	}
	if (!intfc || intfc->num_altsetting >= nalts[i])
		goto skip_to_next_interface_descriptor;

	/* Check for duplicate altsetting entries */
	asnum = d->bAlternateSetting;
	for ((i = 0, alt = &intfc->altsetting[0]);
	      i < intfc->num_altsetting;
	     (++i, ++alt)) {
		if (alt->desc.bAlternateSetting == asnum) {
			dev_warn(ddev, "Duplicate descriptor for config %d "
			    "interface %d altsetting %d, skipping\n",
			    cfgno, inum, asnum);
			goto skip_to_next_interface_descriptor;
		}
	}

	++intfc->num_altsetting;
	memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE);

	/* Skip over any Class Specific or Vendor Specific descriptors;
	 * find the first endpoint or interface descriptor */
	alt->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, &n);
	alt->extralen = i;
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "interface");
	buffer += i;
	size -= i;

	/* Allocate space for the right(?) number of endpoints */
	num_ep = num_ep_orig = alt->desc.bNumEndpoints;
	alt->desc.bNumEndpoints = 0;		// Use as a counter
	if (num_ep > USB_MAXENDPOINTS) {
		dev_warn(ddev, "too many endpoints for config %d interface %d "
		    "altsetting %d: %d, using maximum allowed: %d\n",
		    cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
		num_ep = USB_MAXENDPOINTS;
	}

	if (num_ep > 0) {	/* Can't allocate 0 bytes */
		len = sizeof(struct usb_host_endpoint) * num_ep;
		alt->endpoint = kzalloc(len, GFP_KERNEL);
		if (!alt->endpoint)
			return -ENOMEM;
	}

	/* Parse all the endpoint descriptors */
	n = 0;
	while (size > 0) {
		if (((struct usb_descriptor_header *) buffer)->bDescriptorType
		     == USB_DT_INTERFACE)
			break;
		retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
		    num_ep, buffer, size);
		if (retval < 0)
			return retval;
		++n;

		buffer += retval;
		size -= retval;
	}

	if (n != num_ep_orig)
		dev_warn(ddev, "config %d interface %d altsetting %d has %d "
		    "endpoint descriptor%s, different from the interface "
		    "descriptor's value: %d\n",
		    cfgno, inum, asnum, n, plural(n), num_ep_orig);
	return buffer - buffer0;

skip_to_next_interface_descriptor:
	i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
	    USB_DT_INTERFACE, NULL);
	return buffer - buffer0 + i;
}
Beispiel #5
0
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
    int asnum, struct usb_host_interface *ifp, int num_ep,
    unsigned char *buffer, int size)
{
	unsigned char *buffer0 = buffer;
	struct usb_endpoint_descriptor *d;
	struct usb_host_endpoint *endpoint;
	int n, i, j, retval;
	unsigned int maxp;
	const unsigned short *maxpacket_maxes;

	d = (struct usb_endpoint_descriptor *) buffer;
	buffer += d->bLength;
	size -= d->bLength;

	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
		n = USB_DT_ENDPOINT_AUDIO_SIZE;
	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
		n = USB_DT_ENDPOINT_SIZE;
	else {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint descriptor of length %d, skipping\n",
		    cfgno, inum, asnum, d->bLength);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
	if (i >= 16 || i == 0) {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint with address 0x%X, skipping\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	/* Only store as many endpoints as we have room for */
	if (ifp->desc.bNumEndpoints >= num_ep)
		goto skip_to_next_endpoint_or_interface_descriptor;

	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
	++ifp->desc.bNumEndpoints;

	memcpy(&endpoint->desc, d, n);
	INIT_LIST_HEAD(&endpoint->urb_list);

	/*
	 * Fix up bInterval values outside the legal range.
	 * Use 10 or 8 ms if no proper value can be guessed.
	 */
	i = 0;		/* i = min, j = max, n = default */
	j = 255;
	if (usb_endpoint_xfer_int(d)) {
		i = 1;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_SUPER_PLUS:
		case USB_SPEED_SUPER:
		case USB_SPEED_HIGH:
			/*
			 * Many device manufacturers are using full-speed
			 * bInterval values in high-speed interrupt endpoint
			 * descriptors. Try to fix those and fall back to an
			 * 8-ms default value otherwise.
			 */
			n = fls(d->bInterval*8);
			if (n == 0)
				n = 7;	/* 8 ms = 2^(7-1) uframes */
			j = 16;

			/*
			 * Adjust bInterval for quirked devices.
			 * This quirk fixes bIntervals reported in
			 * linear microframes.
			 */
			if (to_usb_device(ddev)->quirks &
				USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
				n = clamp(fls(d->bInterval), i, j);
				i = j = n;
			}
			break;
		default:		/* USB_SPEED_FULL or _LOW */
			/*
			 * For low-speed, 10 ms is the official minimum.
			 * But some "overclocked" devices might want faster
			 * polling so we'll allow it.
			 */
			n = 10;
			break;
		}
	} else if (usb_endpoint_xfer_isoc(d)) {
		i = 1;
		j = 16;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_HIGH:
			n = 7;		/* 8 ms = 2^(7-1) uframes */
			break;
		default:		/* USB_SPEED_FULL */
			n = 4;		/* 8 ms = 2^(4-1) frames */
			break;
		}
	}
	if (d->bInterval < i || d->bInterval > j) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X has an invalid bInterval %d, "
		    "changing to %d\n",
		    cfgno, inum, asnum,
		    d->bEndpointAddress, d->bInterval, n);
		endpoint->desc.bInterval = n;
	}

	/* Some buggy low-speed devices have Bulk endpoints, which is
	 * explicitly forbidden by the USB spec.  In an attempt to make
	 * them usable, we will try treating them as Interrupt endpoints.
	 */
	if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
			usb_endpoint_xfer_bulk(d)) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X is Bulk; changing to Interrupt\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
		endpoint->desc.bInterval = 1;
		if (usb_endpoint_maxp(&endpoint->desc) > 8)
			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
	}

	/* Validate the wMaxPacketSize field */
	maxp = usb_endpoint_maxp(&endpoint->desc);

	/* Find the highest legal maxpacket size for this endpoint */
	i = 0;		/* additional transactions per microframe */
	switch (to_usb_device(ddev)->speed) {
	case USB_SPEED_LOW:
		maxpacket_maxes = low_speed_maxpacket_maxes;
		break;
	case USB_SPEED_FULL:
		maxpacket_maxes = full_speed_maxpacket_maxes;
		break;
	case USB_SPEED_HIGH:
		/* Bits 12..11 are allowed only for HS periodic endpoints */
		if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
			i = maxp & (BIT(12) | BIT(11));
			maxp &= ~i;
		}
		/* fallthrough */
	default:
		maxpacket_maxes = high_speed_maxpacket_maxes;
		break;
	case USB_SPEED_SUPER:
	case USB_SPEED_SUPER_PLUS:
		maxpacket_maxes = super_speed_maxpacket_maxes;
		break;
	}
	j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)];

	if (maxp > j) {
		dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
		    cfgno, inum, asnum, d->bEndpointAddress, maxp, j);
		maxp = j;
		endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp);
	}

	/*
	 * Some buggy high speed devices have bulk endpoints using
	 * maxpacket sizes other than 512.  High speed HCDs may not
	 * be able to handle that particular bug, so let's warn...
	 */
	if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
			&& usb_endpoint_xfer_bulk(d)) {
		if (maxp != 512)
			dev_warn(ddev, "config %d interface %d altsetting %d "
				"bulk endpoint 0x%X has invalid maxpacket %d\n",
				cfgno, inum, asnum, d->bEndpointAddress,
				maxp);
	}

	/* Parse a possible SuperSpeed endpoint companion descriptor */
	if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER)
		usb_parse_ss_endpoint_companion(ddev, cfgno,
				inum, asnum, endpoint, buffer, size);

	/* Skip over any Class Specific or Vendor Specific descriptors;
	 * find the next endpoint or interface descriptor */
	endpoint->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
			USB_DT_INTERFACE, &n);
	endpoint->extralen = i;
	retval = buffer - buffer0 + i;
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "endpoint");
	return retval;

skip_to_next_endpoint_or_interface_descriptor:
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, NULL);
	return buffer - buffer0 + i;
}
Beispiel #6
0
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
    int asnum, struct usb_host_interface *ifp, int num_ep,
    unsigned char *buffer, int size)
{
	unsigned char *buffer0 = buffer;
	struct usb_endpoint_descriptor *d;
	struct usb_host_endpoint *endpoint;
	int n, i, j, retval;

	d = (struct usb_endpoint_descriptor *) buffer;
	buffer += d->bLength;
	size -= d->bLength;

	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
		n = USB_DT_ENDPOINT_AUDIO_SIZE;
	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
		n = USB_DT_ENDPOINT_SIZE;
	else {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint descriptor of length %d, skipping\n",
		    cfgno, inum, asnum, d->bLength);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
	if (i >= 16 || i == 0) {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint with address 0x%X, skipping\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	
	if (ifp->desc.bNumEndpoints >= num_ep)
		goto skip_to_next_endpoint_or_interface_descriptor;

	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
	++ifp->desc.bNumEndpoints;

	memcpy(&endpoint->desc, d, n);
	INIT_LIST_HEAD(&endpoint->urb_list);

	i = 0;		
	j = 255;
	if (usb_endpoint_xfer_int(d)) {
		i = 1;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_SUPER:
		case USB_SPEED_HIGH:
			n = fls(d->bInterval*8);
			if (n == 0)
				n = 9;	
			j = 16;
			break;
		default:		
			n = 32;
			break;
		}
	} else if (usb_endpoint_xfer_isoc(d)) {
		i = 1;
		j = 16;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_HIGH:
			n = 9;		
			break;
		default:		
			n = 6;		
			break;
		}
	}
	if (d->bInterval < i || d->bInterval > j) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X has an invalid bInterval %d, "
		    "changing to %d\n",
		    cfgno, inum, asnum,
		    d->bEndpointAddress, d->bInterval, n);
		endpoint->desc.bInterval = n;
	}

	if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
			usb_endpoint_xfer_bulk(d)) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X is Bulk; changing to Interrupt\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
		endpoint->desc.bInterval = 1;
		if (usb_endpoint_maxp(&endpoint->desc) > 8)
			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
	}

	if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
			&& usb_endpoint_xfer_bulk(d)) {
		unsigned maxp;

		maxp = usb_endpoint_maxp(&endpoint->desc) & 0x07ff;
		if (maxp != 512)
			dev_warn(ddev, "config %d interface %d altsetting %d "
				"bulk endpoint 0x%X has invalid maxpacket %d\n",
				cfgno, inum, asnum, d->bEndpointAddress,
				maxp);
	}

	
	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER)
		usb_parse_ss_endpoint_companion(ddev, cfgno,
				inum, asnum, endpoint, buffer, size);

	endpoint->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
			USB_DT_INTERFACE, &n);
	endpoint->extralen = i;
	retval = buffer - buffer0 + i;
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "endpoint");
	return retval;

skip_to_next_endpoint_or_interface_descriptor:
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, NULL);
	return buffer - buffer0 + i;
}
Beispiel #7
0
static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
		int inum, int asnum, struct usb_host_endpoint *ep,
		int num_ep, unsigned char *buffer, int size)
{
	unsigned char *buffer_start = buffer;
	struct usb_ss_ep_comp_descriptor	*desc;
	int retval;
	int num_skipped;
	int max_tx;
	int i;

	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
		dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
				" interface %d altsetting %d ep %d: "
				"using minimum values\n",
				cfgno, inum, asnum, ep->desc.bEndpointAddress);
		/*
		 * The next descriptor is for an Endpoint or Interface,
		 * no extra descriptors to copy into the companion structure,
		 * and we didn't eat up any of the buffer.
		 */
		return 0;
	}
	memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
	desc = &ep->ss_ep_comp->desc;
	buffer += desc->bLength;
	size -= desc->bLength;

	/* Eat up the other descriptors we don't care about */
	ep->ss_ep_comp->extra = buffer;
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
			USB_DT_INTERFACE, &num_skipped);
	ep->ss_ep_comp->extralen = i;
	buffer += i;
	size -= i;
	retval = buffer - buffer_start;
	if (num_skipped > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
				num_skipped, plural(num_skipped),
				"SuperSpeed endpoint companion");

	/* Check the various values */
	if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
		dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
				"config %d interface %d altsetting %d ep %d: "
				"setting to zero\n", desc->bMaxBurst,
				cfgno, inum, asnum, ep->desc.bEndpointAddress);
		desc->bMaxBurst = 0;
	}
	if (desc->bMaxBurst > 15) {
		dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
				"config %d interface %d altsetting %d ep %d: "
				"setting to 15\n", desc->bMaxBurst,
				cfgno, inum, asnum, ep->desc.bEndpointAddress);
		desc->bMaxBurst = 15;
	}
	if ((usb_endpoint_xfer_control(&ep->desc) || usb_endpoint_xfer_int(&ep->desc))
			&& desc->bmAttributes != 0) {
		dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
				"config %d interface %d altsetting %d ep %d: "
				"setting to zero\n",
				usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
				desc->bmAttributes,
				cfgno, inum, asnum, ep->desc.bEndpointAddress);
		desc->bmAttributes = 0;
	}
	if (usb_endpoint_xfer_bulk(&ep->desc) && desc->bmAttributes > 16) {
		dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
				"config %d interface %d altsetting %d ep %d: "
				"setting to max\n",
				cfgno, inum, asnum, ep->desc.bEndpointAddress);
		desc->bmAttributes = 16;
	}
	if (usb_endpoint_xfer_isoc(&ep->desc) && desc->bmAttributes > 2) {
		dev_warn(ddev, "Isoc endpoint has Mult of %d in "
				"config %d interface %d altsetting %d ep %d: "
				"setting to 3\n", desc->bmAttributes + 1,
				cfgno, inum, asnum, ep->desc.bEndpointAddress);
		desc->bmAttributes = 2;
	}
	if (usb_endpoint_xfer_isoc(&ep->desc)) {
		max_tx = (desc->bMaxBurst + 1) * (desc->bmAttributes + 1) *
			le16_to_cpu(ep->desc.wMaxPacketSize);
	} else if (usb_endpoint_xfer_int(&ep->desc)) {
		max_tx = le16_to_cpu(ep->desc.wMaxPacketSize) *
			(desc->bMaxBurst + 1);
	} else {
		goto valid;
	}
	if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
		dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
				"config %d interface %d altsetting %d ep %d: "
				"setting to %d\n",
				usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
				le16_to_cpu(desc->wBytesPerInterval),
				cfgno, inum, asnum, ep->desc.bEndpointAddress,
				max_tx);
		desc->wBytesPerInterval = cpu_to_le16(max_tx);
	}
valid:
	return retval;
}
Beispiel #8
0
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
    int asnum, struct usb_host_interface *ifp, int num_ep,
    unsigned char *buffer, int size)
{
	unsigned char *buffer0 = buffer;
	struct usb_endpoint_descriptor *d;
	struct usb_host_endpoint *endpoint;
	int n, i, j, retval;

	d = (struct usb_endpoint_descriptor *) buffer;
	buffer += d->bLength;
	size -= d->bLength;

	if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
		n = USB_DT_ENDPOINT_AUDIO_SIZE;
	else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
		n = USB_DT_ENDPOINT_SIZE;
	else {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint descriptor of length %d, skipping\n",
		    cfgno, inum, asnum, d->bLength);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
	if (i >= 16 || i == 0) {
		dev_warn(ddev, "config %d interface %d altsetting %d has an "
		    "invalid endpoint with address 0x%X, skipping\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		goto skip_to_next_endpoint_or_interface_descriptor;
	}

	/* Only store as many endpoints as we have room for */
	if (ifp->desc.bNumEndpoints >= num_ep)
		goto skip_to_next_endpoint_or_interface_descriptor;

	endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
	++ifp->desc.bNumEndpoints;

	memcpy(&endpoint->desc, d, n);
	INIT_LIST_HEAD(&endpoint->urb_list);

	/* Fix up bInterval values outside the legal range. Use 32 ms if no
	 * proper value can be guessed. */
	i = 0;		/* i = min, j = max, n = default */
	j = 255;
	if (usb_endpoint_xfer_int(d)) {
		i = 1;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_SUPER:
		case USB_SPEED_HIGH:
			/* Many device manufacturers are using full-speed
			 * bInterval values in high-speed interrupt endpoint
			 * descriptors. Try to fix those and fall back to a
			 * 32 ms default value otherwise. */
			n = fls(d->bInterval*8);
			if (n == 0)
				n = 9;	/* 32 ms = 2^(9-1) uframes */
			j = 16;
			break;
		default:		/* USB_SPEED_FULL or _LOW */
			/* For low-speed, 10 ms is the official minimum.
			 * But some "overclocked" devices might want faster
			 * polling so we'll allow it. */
			n = 32;
			break;
		}
	} else if (usb_endpoint_xfer_isoc(d)) {
		i = 1;
		j = 16;
		switch (to_usb_device(ddev)->speed) {
		case USB_SPEED_HIGH:
			n = 9;		/* 32 ms = 2^(9-1) uframes */
			break;
		default:		/* USB_SPEED_FULL */
			n = 6;		/* 32 ms = 2^(6-1) frames */
			break;
		}
	}
	if (d->bInterval < i || d->bInterval > j) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X has an invalid bInterval %d, "
		    "changing to %d\n",
		    cfgno, inum, asnum,
		    d->bEndpointAddress, d->bInterval, n);
		endpoint->desc.bInterval = n;
	}

	/* Some buggy low-speed devices have Bulk endpoints, which is
	 * explicitly forbidden by the USB spec.  In an attempt to make
	 * them usable, we will try treating them as Interrupt endpoints.
	 */
	if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
			usb_endpoint_xfer_bulk(d)) {
		dev_warn(ddev, "config %d interface %d altsetting %d "
		    "endpoint 0x%X is Bulk; changing to Interrupt\n",
		    cfgno, inum, asnum, d->bEndpointAddress);
		endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
		endpoint->desc.bInterval = 1;
		if (le16_to_cpu(endpoint->desc.wMaxPacketSize) > 8)
			endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
	}

	/*
	 * Some buggy high speed devices have bulk endpoints using
	 * maxpacket sizes other than 512.  High speed HCDs may not
	 * be able to handle that particular bug, so let's warn...
	 */
	if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
			&& usb_endpoint_xfer_bulk(d)) {
		unsigned maxp;

		maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize) & 0x07ff;
		if (maxp != 512)
			dev_warn(ddev, "config %d interface %d altsetting %d "
				"bulk endpoint 0x%X has invalid maxpacket %d\n",
				cfgno, inum, asnum, d->bEndpointAddress,
				maxp);
	}
	/* Allocate room for and parse any SS endpoint companion descriptors */
	if (to_usb_device(ddev)->speed == USB_SPEED_SUPER) {
		endpoint->extra = buffer;
		i = find_next_descriptor_more(buffer, size, USB_DT_SS_ENDPOINT_COMP,
				USB_DT_ENDPOINT, USB_DT_INTERFACE, &n);
		endpoint->extralen = i;
		buffer += i;
		size -= i;

		/* Allocate space for the SS endpoint companion descriptor */
		endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
				GFP_KERNEL);
		if (!endpoint->ss_ep_comp)
			return -ENOMEM;

		/* Fill in some default values (may be overwritten later) */
		endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
		endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
		endpoint->ss_ep_comp->desc.bMaxBurst = 0;
		/*
		 * Leave bmAttributes as zero, which will mean no streams for
		 * bulk, and isoc won't support multiple bursts of packets.
		 * With bursts of only one packet, and a Mult of 1, the max
		 * amount of data moved per endpoint service interval is one
		 * packet.
		 */
		if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
				usb_endpoint_xfer_int(&endpoint->desc))
			endpoint->ss_ep_comp->desc.wBytesPerInterval =
				endpoint->desc.wMaxPacketSize;

		if (size > 0) {
			retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
					inum, asnum, endpoint, num_ep, buffer,
					size);
			if (retval >= 0) {
				buffer += retval;
				retval = buffer - buffer0;
			}
		} else {
			dev_warn(ddev, "config %d interface %d altsetting %d "
				"endpoint 0x%X has no "
				"SuperSpeed companion descriptor\n",
				cfgno, inum, asnum, d->bEndpointAddress);
			retval = buffer - buffer0;
		}
	} else {
		/* Skip over any Class Specific or Vendor Specific descriptors;
		 * find the next endpoint or interface descriptor */
		endpoint->extra = buffer;
		i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
				USB_DT_INTERFACE, &n);
		endpoint->extralen = i;
		retval = buffer - buffer0 + i;
	}
	if (n > 0)
		dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
		    n, plural(n), "endpoint");
	return retval;

skip_to_next_endpoint_or_interface_descriptor:
	i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
	    USB_DT_INTERFACE, NULL);
	return buffer - buffer0 + i;
}