Beispiel #1
0
static void print_supported_chips_wiki(int cols)
{
	int i = 0, c = 1, chipcount = 0;
	const struct flashchip *f, *old = NULL;
	uint32_t t;

	for (f = flashchips; f->name != NULL; f++)
		chipcount++;

	printf("\n== Supported chips ==\n\nTotal amount of supported "
	       "chips: '''%d'''\n\n{| border=\"0\" valign=\"top\"\n"
		"| valign=\"top\"|\n\n%s", chipcount, chip_th);

	for (f = flashchips; f->name != NULL; f++, i++) {
		/* Don't print "unknown XXXX SPI chip" entries. */
		if (!strncmp(f->name, "unknown", 7))
			continue;

		/* Alternate colors if the vendor changes. */
		if (old != NULL && strcmp(old->vendor, f->vendor))
			c = !c;

		t = f->tested;
		printf("|- bgcolor=\"#%s\"\n| %s || %s || %d "
		       "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}\n",
		       (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
		       f->total_size, flashbuses_to_text(f->bustype),
		       (t & TEST_OK_PROBE) ? "OK" :
		       (t & TEST_BAD_PROBE) ? "No" : "?3",
		       (t & TEST_OK_READ) ? "OK" :
		       (t & TEST_BAD_READ) ? "No" : "?3",
		       (t & TEST_OK_ERASE) ? "OK" :
		       (t & TEST_BAD_ERASE) ? "No" : "?3",
		       (t & TEST_OK_WRITE) ? "OK" :
		       (t & TEST_BAD_WRITE) ? "No" : "?3");

		/* Split table into 'cols' columns. */
		if (i >= (chipcount / cols + 1)) {
			printf("\n|}\n\n| valign=\"top\"|\n\n%s", chip_th);
			i = 0;
		}

		old = f;
	}

	printf("\n|}\n\n|}\n");
}
Beispiel #2
0
static void print_supported_chips_wiki(int cols)
{
	unsigned int lines_per_col;
	char *s;
	char vmax[6];
	char vmin[6];
	const struct flashchip *f, *old = NULL;
	int i = 0, c = 1, chipcount = 0;

	for (f = flashchips; f->name != NULL; f++) {
		/* Don't count generic entries. */
		if (!strncmp(f->vendor, "Unknown", 7) ||
		    !strncmp(f->vendor, "Programmer", 10) ||
		    !strncmp(f->name, "unknown", 7))
			continue;
		chipcount++;
	}

	/* +1 to force the resulting number of columns to be < cols */
	lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0);

	printf("%s", chip_intro);
	printf("\nTotal amount of supported chips: '''%d'''\n\n"
	       "{| border=\"0\" valign=\"top\"\n", chipcount);

	for (f = flashchips; f->name != NULL; f++) {
		/* Don't print generic entries. */
		if (!strncmp(f->vendor, "Unknown", 7) ||
		    !strncmp(f->vendor, "Programmer", 10) ||
		    !strncmp(f->name, "unknown", 7))
			continue;

		if ((i % lines_per_col) == 0)
			printf("%s%s", th_start, chip_th);

		/* Alternate colors if the vendor changes. */
		if (old != NULL && strcmp(old->vendor, f->vendor))
			c = !c;

		old = f;
		s = flashbuses_to_text(f->bustype);
		sprintf(vmin, "%0.03f", f->voltage.min / (double)1000);
		sprintf(vmax, "%0.03f", f->voltage.max / (double)1000);
		printf("|- bgcolor=\"#%s\"\n| %s || %s || align=\"right\" | %d "
		       "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}"
		       "|| %s || %s \n",
		       (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
		       f->total_size, s,
		       test_state_to_template(f->tested.probe),
		       test_state_to_template(f->tested.read),
		       test_state_to_template(f->tested.erase),
		       test_state_to_template(f->tested.write),
		       f->voltage.min ? vmin : "?",
		       f->voltage.max ? vmax : "?");
		free(s);

		if (((i % lines_per_col) + 1) == lines_per_col)
			printf("\n|}\n\n");
		i++;
	}
	/* end inner table if it did not fill the last column fully */
	if (((i % lines_per_col)) > 0)
		printf("\n|}\n\n");
	printf("|}\n\n");
}
Beispiel #3
0
int main(int argc, char *argv[])
{
	const struct flashchip *chip = NULL;
	/* Probe for up to eight flash chips. */
	struct flashctx flashes[8] = {{0}};
	struct flashctx *fill_flash;
	const char *name;
	int namelen, opt, i, j;
	int startchip = -1, chipcount = 0, option_index = 0, force = 0, ifd = 0, fmap = 0;
#if CONFIG_PRINT_WIKI == 1
	int list_supported_wiki = 0;
#endif
	int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0;
	int dont_verify_it = 0, dont_verify_all = 0, list_supported = 0, operation_specified = 0;
	struct flashrom_layout *layout = NULL;
	enum programmer prog = PROGRAMMER_INVALID;
	enum {
		OPTION_IFD = 0x0100,
		OPTION_FMAP,
		OPTION_FMAP_FILE,
		OPTION_FLASH_CONTENTS,
	};
	int ret = 0;

	static const char optstring[] = "r:Rw:v:nNVEfc:l:i:p:Lzho:";
	static const struct option long_options[] = {
		{"read",		1, NULL, 'r'},
		{"write",		1, NULL, 'w'},
		{"erase",		0, NULL, 'E'},
		{"verify",		1, NULL, 'v'},
		{"noverify",		0, NULL, 'n'},
		{"noverify-all",	0, NULL, 'N'},
		{"chip",		1, NULL, 'c'},
		{"verbose",		0, NULL, 'V'},
		{"force",		0, NULL, 'f'},
		{"layout",		1, NULL, 'l'},
		{"ifd",			0, NULL, OPTION_IFD},
		{"fmap",		0, NULL, OPTION_FMAP},
		{"fmap-file",		1, NULL, OPTION_FMAP_FILE},
		{"image",		1, NULL, 'i'},
		{"flash-contents",	1, NULL, OPTION_FLASH_CONTENTS},
		{"list-supported",	0, NULL, 'L'},
		{"list-supported-wiki",	0, NULL, 'z'},
		{"programmer",		1, NULL, 'p'},
		{"help",		0, NULL, 'h'},
		{"version",		0, NULL, 'R'},
		{"output",		1, NULL, 'o'},
		{NULL,			0, NULL, 0},
	};

	char *filename = NULL;
	char *referencefile = NULL;
	char *layoutfile = NULL;
	char *fmapfile = NULL;
#ifndef STANDALONE
	char *logfile = NULL;
#endif /* !STANDALONE */
	char *tempstr = NULL;
	char *pparam = NULL;

	flashrom_set_log_callback((flashrom_log_callback *)&flashrom_print_cb);

	print_version();
	print_banner();

	if (selfcheck())
		exit(1);

	setbuf(stdout, NULL);
	/* FIXME: Delay all operation_specified checks until after command
	 * line parsing to allow --help overriding everything else.
	 */
	while ((opt = getopt_long(argc, argv, optstring,
				  long_options, &option_index)) != EOF) {
		switch (opt) {
		case 'r':
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			filename = strdup(optarg);
			read_it = 1;
			break;
		case 'w':
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			filename = strdup(optarg);
			write_it = 1;
			break;
		case 'v':
			//FIXME: gracefully handle superfluous -v
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (dont_verify_it) {
				fprintf(stderr, "--verify and --noverify are mutually exclusive. Aborting.\n");
				cli_classic_abort_usage();
			}
			filename = strdup(optarg);
			verify_it = 1;
			break;
		case 'n':
			if (verify_it) {
				fprintf(stderr, "--verify and --noverify are mutually exclusive. Aborting.\n");
				cli_classic_abort_usage();
			}
			dont_verify_it = 1;
			break;
		case 'N':
			dont_verify_all = 1;
			break;
		case 'c':
			chip_to_probe = strdup(optarg);
			break;
		case 'V':
			verbose_screen++;
			if (verbose_screen > FLASHROM_MSG_DEBUG2)
				verbose_logfile = verbose_screen;
			break;
		case 'E':
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			erase_it = 1;
			break;
		case 'f':
			force = 1;
			break;
		case 'l':
			if (layoutfile) {
				fprintf(stderr, "Error: --layout specified "
					"more than once. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (ifd) {
				fprintf(stderr, "Error: --layout and --ifd both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (fmap) {
				fprintf(stderr, "Error: --layout and --fmap-file both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			layoutfile = strdup(optarg);
			break;
		case OPTION_IFD:
			if (layoutfile) {
				fprintf(stderr, "Error: --layout and --ifd both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (fmap) {
				fprintf(stderr, "Error: --fmap-file and --ifd both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			ifd = 1;
			break;
		case OPTION_FMAP_FILE:
			if (fmap) {
				fprintf(stderr, "Error: --fmap or --fmap-file specified "
					"more than once. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (ifd) {
				fprintf(stderr, "Error: --fmap-file and --ifd both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (layoutfile) {
				fprintf(stderr, "Error: --fmap-file and --layout both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			fmapfile = strdup(optarg);
			fmap = 1;
			break;
		case OPTION_FMAP:
			if (fmap) {
				fprintf(stderr, "Error: --fmap or --fmap-file specified "
					"more than once. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (ifd) {
				fprintf(stderr, "Error: --fmap and --ifd both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			if (layoutfile) {
				fprintf(stderr, "Error: --layout and --fmap both specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			fmap = 1;
			break;
		case 'i':
			tempstr = strdup(optarg);
			if (register_include_arg(tempstr)) {
				free(tempstr);
				cli_classic_abort_usage();
			}
			break;
		case OPTION_FLASH_CONTENTS:
			referencefile = strdup(optarg);
			break;
		case 'L':
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			list_supported = 1;
			break;
		case 'z':
#if CONFIG_PRINT_WIKI == 1
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			list_supported_wiki = 1;
#else
			fprintf(stderr, "Error: Wiki output was not compiled "
				"in. Aborting.\n");
			cli_classic_abort_usage();
#endif
			break;
		case 'p':
			if (prog != PROGRAMMER_INVALID) {
				fprintf(stderr, "Error: --programmer specified "
					"more than once. You can separate "
					"multiple\nparameters for a programmer "
					"with \",\". Please see the man page "
					"for details.\n");
				cli_classic_abort_usage();
			}
			for (prog = 0; prog < PROGRAMMER_INVALID; prog++) {
				name = programmer_table[prog].name;
				namelen = strlen(name);
				if (strncmp(optarg, name, namelen) == 0) {
					switch (optarg[namelen]) {
					case ':':
						pparam = strdup(optarg + namelen + 1);
						if (!strlen(pparam)) {
							free(pparam);
							pparam = NULL;
						}
						break;
					case '\0':
						break;
					default:
						/* The continue refers to the
						 * for loop. It is here to be
						 * able to differentiate between
						 * foo and foobar.
						 */
						continue;
					}
					break;
				}
			}
			if (prog == PROGRAMMER_INVALID) {
				fprintf(stderr, "Error: Unknown programmer \"%s\". Valid choices are:\n",
					optarg);
				list_programmers_linebreak(0, 80, 0);
				msg_ginfo(".\n");
				cli_classic_abort_usage();
			}
			break;
		case 'R':
			/* print_version() is always called during startup. */
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			exit(0);
			break;
		case 'h':
			if (++operation_specified > 1) {
				fprintf(stderr, "More than one operation "
					"specified. Aborting.\n");
				cli_classic_abort_usage();
			}
			cli_classic_usage(argv[0]);
			exit(0);
			break;
		case 'o':
#ifdef STANDALONE
			fprintf(stderr, "Log file not supported in standalone mode. Aborting.\n");
			cli_classic_abort_usage();
#else /* STANDALONE */
			logfile = strdup(optarg);
			if (logfile[0] == '\0') {
				fprintf(stderr, "No log filename specified.\n");
				cli_classic_abort_usage();
			}
#endif /* STANDALONE */
			break;
		default:
			cli_classic_abort_usage();
			break;
		}
	}

	if (optind < argc) {
		fprintf(stderr, "Error: Extra parameter found.\n");
		cli_classic_abort_usage();
	}

	if ((read_it | write_it | verify_it) && check_filename(filename, "image")) {
		cli_classic_abort_usage();
	}
	if (layoutfile && check_filename(layoutfile, "layout")) {
		cli_classic_abort_usage();
	}
	if (fmapfile && check_filename(fmapfile, "fmap")) {
		cli_classic_abort_usage();
	}
	if (referencefile && check_filename(referencefile, "reference")) {
		cli_classic_abort_usage();
	}

#ifndef STANDALONE
	if (logfile && check_filename(logfile, "log"))
		cli_classic_abort_usage();
	if (logfile && open_logfile(logfile))
		cli_classic_abort_usage();
#endif /* !STANDALONE */

#if CONFIG_PRINT_WIKI == 1
	if (list_supported_wiki) {
		print_supported_wiki();
		goto out;
	}
#endif

	if (list_supported) {
		if (print_supported())
			ret = 1;
		goto out;
	}

#ifndef STANDALONE
	start_logging();
#endif /* !STANDALONE */

	print_buildinfo();
	msg_gdbg("Command line (%i args):", argc - 1);
	for (i = 0; i < argc; i++) {
		msg_gdbg(" %s", argv[i]);
	}
	msg_gdbg("\n");

	if (layoutfile && read_romlayout(layoutfile)) {
		ret = 1;
		goto out;
	}

	if (!ifd && !fmap && process_include_args(get_global_layout())) {
		ret = 1;
		goto out;
	}
	/* Does a chip with the requested name exist in the flashchips array? */
	if (chip_to_probe) {
		for (chip = flashchips; chip && chip->name; chip++)
			if (!strcmp(chip->name, chip_to_probe))
				break;
		if (!chip || !chip->name) {
			msg_cerr("Error: Unknown chip '%s' specified.\n", chip_to_probe);
			msg_gerr("Run flashrom -L to view the hardware supported in this flashrom version.\n");
			ret = 1;
			goto out;
		}
		/* Keep chip around for later usage in case a forced read is requested. */
	}

	if (prog == PROGRAMMER_INVALID) {
		if (CONFIG_DEFAULT_PROGRAMMER != PROGRAMMER_INVALID) {
			prog = CONFIG_DEFAULT_PROGRAMMER;
			/* We need to strdup here because we free(pparam) unconditionally later. */
			pparam = strdup(CONFIG_DEFAULT_PROGRAMMER_ARGS);
			msg_pinfo("Using default programmer \"%s\" with arguments \"%s\".\n",
				  programmer_table[CONFIG_DEFAULT_PROGRAMMER].name, pparam);
		} else {
			msg_perr("Please select a programmer with the --programmer parameter.\n"
				 "Previously this was not necessary because there was a default set.\n"
#if CONFIG_INTERNAL == 1
				 "To choose the mainboard of this computer use 'internal'. "
#endif
				 "Valid choices are:\n");
			list_programmers_linebreak(0, 80, 0);
			msg_ginfo(".\n");
			ret = 1;
			goto out;
		}
	}

	/* FIXME: Delay calibration should happen in programmer code. */
	myusec_calibrate_delay();

	if (programmer_init(prog, pparam)) {
		msg_perr("Error: Programmer initialization failed.\n");
		ret = 1;
		goto out_shutdown;
	}
	tempstr = flashbuses_to_text(get_buses_supported());
	msg_pdbg("The following protocols are supported: %s.\n", tempstr);
	free(tempstr);

	for (j = 0; j < registered_master_count; j++) {
		startchip = 0;
		while (chipcount < ARRAY_SIZE(flashes)) {
			startchip = probe_flash(&registered_masters[j], startchip, &flashes[chipcount], 0);
			if (startchip == -1)
				break;
			chipcount++;
			startchip++;
		}
	}

	if (chipcount > 1) {
		msg_cinfo("Multiple flash chip definitions match the detected chip(s): \"%s\"",
			  flashes[0].chip->name);
		for (i = 1; i < chipcount; i++)
			msg_cinfo(", \"%s\"", flashes[i].chip->name);
		msg_cinfo("\nPlease specify which chip definition to use with the -c <chipname> option.\n");
		ret = 1;
		goto out_shutdown;
	} else if (!chipcount) {
		msg_cinfo("No EEPROM/flash device found.\n");
		if (!force || !chip_to_probe) {
			msg_cinfo("Note: flashrom can never write if the flash chip isn't found "
				  "automatically.\n");
		}
		if (force && read_it && chip_to_probe) {
			struct registered_master *mst;
			int compatible_masters = 0;
			msg_cinfo("Force read (-f -r -c) requested, pretending the chip is there:\n");
			/* This loop just counts compatible controllers. */
			for (j = 0; j < registered_master_count; j++) {
				mst = &registered_masters[j];
				/* chip is still set from the chip_to_probe earlier in this function. */
				if (mst->buses_supported & chip->bustype)
					compatible_masters++;
			}
			if (!compatible_masters) {
				msg_cinfo("No compatible controller found for the requested flash chip.\n");
				ret = 1;
				goto out_shutdown;
			}
			if (compatible_masters > 1)
				msg_cinfo("More than one compatible controller found for the requested flash "
					  "chip, using the first one.\n");
			for (j = 0; j < registered_master_count; j++) {
				mst = &registered_masters[j];
				startchip = probe_flash(mst, 0, &flashes[0], 1);
				if (startchip != -1)
					break;
			}
			if (startchip == -1) {
				// FIXME: This should never happen! Ask for a bug report?
				msg_cinfo("Probing for flash chip '%s' failed.\n", chip_to_probe);
				ret = 1;
				goto out_shutdown;
			}
			if (map_flash(&flashes[0]) != 0) {
				free(flashes[0].chip);
				ret = 1;
				goto out_shutdown;
			}
			msg_cinfo("Please note that forced reads most likely contain garbage.\n");
			ret = read_flash_to_file(&flashes[0], filename);
			unmap_flash(&flashes[0]);
			free(flashes[0].chip);
			goto out_shutdown;
		}
		ret = 1;
		goto out_shutdown;
	} else if (!chip_to_probe) {
		/* repeat for convenience when looking at foreign logs */
		tempstr = flashbuses_to_text(flashes[0].chip->bustype);
		msg_gdbg("Found %s flash chip \"%s\" (%d kB, %s).\n",
			 flashes[0].chip->vendor, flashes[0].chip->name, flashes[0].chip->total_size, tempstr);
		free(tempstr);
	}

	fill_flash = &flashes[0];

	print_chip_support_status(fill_flash->chip);

	unsigned int limitexceeded = count_max_decode_exceedings(fill_flash);
	if (limitexceeded > 0 && !force) {
		enum chipbustype commonbuses = fill_flash->mst->buses_supported & fill_flash->chip->bustype;

		/* Sometimes chip and programmer have more than one bus in common,
		 * and the limit is not exceeded on all buses. Tell the user. */
		if ((bitcount(commonbuses) > limitexceeded)) {
			msg_pdbg("There is at least one interface available which could support the size of\n"
				 "the selected flash chip.\n");
		}
		msg_cerr("This flash chip is too big for this programmer (--verbose/-V gives details).\n"
			 "Use --force/-f to override at your own risk.\n");
		ret = 1;
		goto out_shutdown;
	}

	if (!(read_it | write_it | verify_it | erase_it)) {
		msg_ginfo("No operations were specified.\n");
		goto out_shutdown;
	}

	if (layoutfile) {
		layout = get_global_layout();
	} else if (ifd && (flashrom_layout_read_from_ifd(&layout, fill_flash, NULL, 0) ||
			   process_include_args(layout))) {
		ret = 1;
		goto out_shutdown;
	} else if (fmap && fmapfile) {
		struct stat s;
		if (stat(fmapfile, &s) != 0) {
			msg_gerr("Failed to stat fmapfile \"%s\"\n", fmapfile);
			ret = 1;
			goto out_shutdown;
		}

		size_t fmapfile_size = s.st_size;
		uint8_t *fmapfile_buffer = malloc(fmapfile_size);
		if (!fmapfile_buffer) {
			ret = 1;
			goto out_shutdown;
		}

		if (read_buf_from_file(fmapfile_buffer, fmapfile_size, fmapfile)) {
			ret = 1;
			free(fmapfile_buffer);
			goto out_shutdown;
		}

		if (flashrom_layout_read_fmap_from_buffer(&layout, fill_flash, fmapfile_buffer, fmapfile_size) ||
				process_include_args(layout)) {
			ret = 1;
			free(fmapfile_buffer);
			goto out_shutdown;
		}
		free(fmapfile_buffer);
	} else if (fmap && (flashrom_layout_read_fmap_from_rom(&layout, fill_flash, 0,
				fill_flash->chip->total_size * 1024) || process_include_args(layout))) {
		ret = 1;
		goto out_shutdown;
	}

	flashrom_layout_set(fill_flash, layout);
	flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE, !!force);
#if CONFIG_INTERNAL == 1
	flashrom_flag_set(fill_flash, FLASHROM_FLAG_FORCE_BOARDMISMATCH, !!force_boardmismatch);
#endif
	flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_AFTER_WRITE, !dont_verify_it);
	flashrom_flag_set(fill_flash, FLASHROM_FLAG_VERIFY_WHOLE_CHIP, !dont_verify_all);

	/* FIXME: We should issue an unconditional chip reset here. This can be
	 * done once we have a .reset function in struct flashchip.
	 * Give the chip time to settle.
	 */
	programmer_delay(100000);
	if (read_it)
		ret = do_read(fill_flash, filename);
	else if (erase_it)
		ret = do_erase(fill_flash);
	else if (write_it)
		ret = do_write(fill_flash, filename, referencefile);
	else if (verify_it)
		ret = do_verify(fill_flash, filename);

	flashrom_layout_release(layout);

out_shutdown:
	programmer_shutdown();
out:
	for (i = 0; i < chipcount; i++)
		free(flashes[i].chip);

	layout_cleanup();
	free(filename);
	free(fmapfile);
	free(referencefile);
	free(layoutfile);
	free(pparam);
	/* clean up global variables */
	free((char *)chip_to_probe); /* Silence! Freeing is not modifying contents. */
	chip_to_probe = NULL;
#ifndef STANDALONE
	free(logfile);
	ret |= close_logfile();
#endif /* !STANDALONE */
	return ret;
}
Beispiel #4
0
static void print_supported_chips_wiki(int cols)
{
	unsigned int lines_per_col;
	uint32_t t;
	char *s;
	char vmax[6];
	char vmin[6];
	const struct flashchip *f, *old = NULL;
	int i = 0, c = 1, chipcount = 0;

	for (f = flashchips; f->name != NULL; f++) {
		/* Don't count generic entries. */
		if (!strncmp(f->vendor, "Unknown", 7) ||
		    !strncmp(f->vendor, "Programmer", 10) ||
		    !strncmp(f->name, "unknown", 7))
			continue;
		chipcount++;
	}

	/* +1 to force the resulting number of columns to be < cols */
	lines_per_col = chipcount / cols + ((chipcount%cols) > 0 ? 1 : 0);

	printf("\n== Supported chips ==\n\nTotal amount of supported chips: '''%d'''\n\n"
	       "{| border=\"0\" valign=\"top\"\n", chipcount);

	for (f = flashchips; f->name != NULL; f++) {
		/* Don't print generic entries. */
		if (!strncmp(f->vendor, "Unknown", 7) ||
		    !strncmp(f->vendor, "Programmer", 10) ||
		    !strncmp(f->name, "unknown", 7))
			continue;

		if ((i % lines_per_col) == 0)
			printf("%s%s", th_start, chip_th);

		/* Alternate colors if the vendor changes. */
		if (old != NULL && strcmp(old->vendor, f->vendor))
			c = !c;

		old = f;
		t = f->tested;
		s = flashbuses_to_text(f->bustype);
		sprintf(vmin, "%0.03f", f->voltage.min / (double)1000);
		sprintf(vmax, "%0.03f", f->voltage.max / (double)1000);
		/* '{{%s}}' is used in combination with 'OK', 'No' and '?3' to
		 * select special formatting templates for the bg color. */
		printf("|- bgcolor=\"#%s\"\n| %s || %s || align=\"right\" | %d "
		       "|| %s || {{%s}} || {{%s}} || {{%s}} || {{%s}}"
		       "|| %s || %s \n",
		       (c == 1) ? "eeeeee" : "dddddd", f->vendor, f->name,
		       f->total_size, s,
		       (t & TEST_OK_PROBE) ? "OK" :
		       (t & TEST_BAD_PROBE) ? "No" : "?3",
		       (t & TEST_OK_READ) ? "OK" :
		       (t & TEST_BAD_READ) ? "No" : "?3",
		       (t & TEST_OK_ERASE) ? "OK" :
		       (t & TEST_BAD_ERASE) ? "No" : "?3",
		       (t & TEST_OK_WRITE) ? "OK" :
		       (t & TEST_BAD_WRITE) ? "No" : "?3",
		       f->voltage.min ? vmin : "N/A",
		       f->voltage.min ? vmax : "N/A");
		free(s);

		if (((i % lines_per_col) + 1) == lines_per_col)
			printf("\n|}\n\n");
		i++;
	}
	/* end inner table if it did not fill the last column fully */
	if (((i % lines_per_col)) > 0)
		printf("\n|}\n\n");
	printf("|}\n\n");
}