Beispiel #1
0
void IRQ_UART1(void){
	INT32U drop,id,cont;
	drop = drop;

	if(rSUBSRCPND&(B5)){//Exception
		delay(10);
		rSUBSRCPND = (B3)|(B4)|(B5);
		rSRCPND = rINTPND;
		rINTPND = rINTPND;
		
		drop = rUERSTAT1;
		flush1();
	}
	else if(rSUBSRCPND&(B3)){//RXD1	
		rSUBSRCPND = (B3);
		rSRCPND = rINTPND;
		rINTPND = rINTPND;
		
		while(!RxF1COUNT);
		delay(10);
		drop = rURXH1;
		id = 0;
		for(cont = 1000000000;cont > 0;cont = cont/10)
			id += ((rURXH1-0x30)*cont);
		flush1();
		OSMboxPost(Mbox_UART0Tx,(void*)id);	
	}
}
Beispiel #2
0
/*
 * Termchar routine for command mode.
 * Watch for possible switching to -nl mode.
 * Otherwise flush into next level of buffering when
 * small buffer fills or at a newline.
 */
int
termchar(int c)
{

	if (pfast == 0 && phadnl)
		pstart();
	if (c == '\n')
		phadnl = 1;
	else if (linp >= &linb[63])
		flush1();
#ifdef	MB
	if (mb_cur_max > 1 && c & ~(wchar_t)0177) {
		char	mb[MB_LEN_MAX];
		int	i, n;
		n = wctomb(mb, c&TRIM);
		for (i = 0; i < n; i++)
			*linp++ = mb[i];
	} else
#endif	/* MB */
		*linp++ = c;
	if (linp >= &linb[63]) {
		fgoto();
		flush1();
	}
	return c;
}
Beispiel #3
0
/*
    exactly the same as getblock(), but the data will be completely
    overwritten. so there is no need to read from disk first
 */
struct buffer FAR * getblockOver(ULONG blkno, COUNT dsk)
{
    struct buffer FAR *bp;

  /* Search through buffers to see if the required block  */
  /* is already in a buffer                               */

    if (searchblock(blkno, dsk, &bp))
    {
      return bp;
    }      

  /* The block we need is not in a buffer, we must make a buffer  */
  /* available. */

  /* take the buffer than lbp points to and flush it, then make it available. */
  if (flush1(bp))              /* success              */
  {
    bp->b_flag = 0;
    bp->b_unit = dsk;
    setblkno(bp, blkno);
    return bp;
  }
  else
    /* failure              */
  {
    return NULL;
  }
}
Beispiel #4
0
void AllocateHMASpace (size_t lowbuffer, size_t highbuffer)
{
  REG struct buffer FAR *bp = firstbuf;
  int n;

  if (FP_SEG(bp) != 0xffff)
    return;

  n = LoL_nbuffers;
  do
  {
    /* check if buffer intersects with requested area                  */
    if (FP_OFF(bp) < highbuffer && FP_OFF(bp+1) > lowbuffer)
    {
      flush1(bp);
      /* unlink bp from buffer chain */

      b_prev(bp)->b_next = bp->b_next;
      b_next(bp)->b_prev = bp->b_prev;
      if (FP_OFF(bp) == FP_OFF(firstbuf))
        firstbuf = b_next(bp);
      LoL_nbuffers--;
    }
    bp = b_next(bp);
  }
  while (--n);
}
Beispiel #5
0
struct buffer FAR *getblk(ULONG blkno, COUNT dsk, BOOL overwrite)
{
  /* Search through buffers to see if the required block  */
  /* is already in a buffer                               */

  struct buffer FAR *bp = searchblock(blkno, dsk);

  if (!(bp->b_flag & BFR_UNCACHE))
  {
    return bp;
  }

  /* The block we need is not in a buffer, we must make a buffer  */
  /* available, and fill it with the desired block                */

  /* take the buffer that lbp points to and flush it, then read new block. */
  if (!flush1(bp))
    return NULL;

  /* Fill the indicated disk buffer with the current track and sector */

  if (!overwrite && dskxfer(dsk, blkno, bp->b_buffer, 1, DSKREAD))
  {
    return NULL;
  }

  bp->b_flag = BFR_VALID | BFR_DATA;
  bp->b_unit = dsk;
  bp->b_blkno = blkno;

  return bp;
}
Beispiel #6
0
void
flush(void)
{

	flush1();
	flush2();
}
Beispiel #7
0
/*
 * Tab to column col by flushing and then setting destcol.
 * Used by "set all".
 */
void
tab(int col)
{

	flush1();
	destcol = col;
}
Beispiel #8
0
/*
 * Termchar routine for command mode.
 * Watch for possible switching to -nl mode.
 * Otherwise flush into next level of buffering when
 * small buffer fills or at a newline.
 */
void
termchar(int c)
{

	if (pfast == 0 && phadnl)
		pstart();
	if (c == '\n')
		phadnl = 1;
	else if (linp >= &linb[63])
		flush1();
	*linp++ = c;
	if (linp >= &linb[63]) {
		fgoto();
		flush1();
	}
}
Beispiel #9
0
BOOL flush_buffers(REG COUNT dsk)
{
  REG struct buffer FAR *bp;
  REG BOOL ok = TRUE;

  bp = firstbuf;
  while (bp)
  {
    if (bp->b_unit == dsk)
      if (!flush1(bp))
        ok = FALSE;
    bp = bp->b_next;
  }
  return ok;
}
Beispiel #10
0
BOOL flush_buffers(REG COUNT dsk)
{
  struct buffer FAR *bp = firstbuf;
  REG BOOL ok = TRUE;

  bp = firstbuf;
  do
  {
    if (bp->b_unit == dsk)
      if (!flush1(bp))
        ok = FALSE;
    bp = b_next(bp);
  }
  while (FP_OFF(bp) != FP_OFF(firstbuf));
  return ok;
}
Beispiel #11
0
BOOL DeleteBlockInBufferCache(ULONG blknolow, ULONG blknohigh, COUNT dsk)
{
    struct buffer FAR *bp;

  /* Search through buffers to see if the required block  */
  /* is already in a buffer                               */

  for (bp = firstbuf; bp != NULL; bp = bp->b_next)
  {
    if (blknolow  <= getblkno(bp) &&
        getblkno(bp) <= blknohigh &&
        (bp->b_flag & BFR_VALID)  && (bp->b_unit == dsk))
    {
        flush1(bp);
    }
  }

  return FALSE;  
}                                
Beispiel #12
0
BOOL flush(void)
{
  REG struct buffer FAR *bp = firstbuf;
  REG BOOL ok;

  ok = TRUE;
  do
  {
    if (!flush1(bp))
      ok = FALSE;
    bp->b_flag &= ~BFR_VALID;
    bp = b_next(bp);
  }
  while (FP_OFF(bp) != FP_OFF(firstbuf));

  network_redirector(REM_FLUSHALL);

  return (ok);
}
Beispiel #13
0
BOOL flush(void)
{
  REG struct buffer FAR *bp;
  REG BOOL ok;

  ok = TRUE;
  bp = firstbuf;
  while (bp)
  {
    if (!flush1(bp))
      ok = FALSE;
    bp->b_flag &= ~BFR_VALID;
    bp = bp->b_next;
  }

  remote_flushall();

  return (ok);
}
Beispiel #14
0
BOOL DeleteBlockInBufferCache(ULONG blknolow, ULONG blknohigh, COUNT dsk, int mode)
{
  struct buffer FAR *bp = firstbuf;
        
  /* Search through buffers to see if the required block  */
  /* is already in a buffer                               */

  do
  {
    if (blknolow <= bp->b_blkno &&
        bp->b_blkno <= blknohigh &&
        (bp->b_flag & BFR_VALID) && (bp->b_unit == dsk))
    {
      if (mode == XFR_READ)
        flush1(bp);
      else
        bp->b_flag = 0;
    }
    bp = b_next(bp);
  }
  while (FP_OFF(bp) != FP_OFF(firstbuf));

  return FALSE;
}
Beispiel #15
0
struct buffer FAR *getblock(ULONG blkno, COUNT dsk)
{
    struct buffer FAR *bp;



  /* Search through buffers to see if the required block  */
  /* is already in a buffer                               */

    if (searchblock(blkno, dsk, &bp))
    {
      return (bp);
    }

  /* The block we need is not in a buffer, we must make a buffer  */
  /* available, and fill it with the desired block                */


  /* take the buffer that lbp points to and flush it, then read new block. */
  if (!flush1(bp))
        return NULL;
  
            /* Fill the indicated disk buffer with the current track and sector */

  if (dskxfer(dsk, blkno, (VOID FAR *) bp->b_buffer, 1, DSKREAD))
    {
        return NULL;
    }

  bp->b_flag = BFR_VALID | BFR_DATA;
  bp->b_unit = dsk;
  setblkno(bp, blkno);
  
  return bp;

}
Beispiel #16
0
/*
 * Main loop for command mode command decoding.
 * A few commands are executed here, but main function
 * is to strip command addresses, do a little address oriented
 * processing and call command routines to do the real work.
 */
void
commands(bool noprompt, bool exitoneof)
{
	register line *addr;
	register int c;
	register int lchng;
	int given;
	int seensemi;
	int cnt;
	bool hadpr;

	resetflav();
	nochng();
	for (;;) {
		/*
		 * If dot at last command
		 * ended up at zero, advance to one if there is a such.
		 */
		if (dot <= zero) {
			dot = zero;
			if (dol > zero)
				dot = one;
		}
		shudclob = 0;

		/*
		 * If autoprint or trailing print flags,
		 * print the line at the specified offset
		 * before the next command.
		 */
		if (pflag ||
		    (lchng != chng && value(AUTOPRINT) && !inglobal && !inopen && endline)) {
			pflag = 0;
			nochng();
			if (dol != zero) {
				addr1 = addr2 = dot + poffset;
				if (addr1 < one || addr1 > dol)
error("Offset out-of-bounds|Offset after command too large");
				setdot1();
				goto print;
			}
		}
		nochng();

		/*
		 * Print prompt if appropriate.
		 * If not in global flush output first to prevent
		 * going into pfast mode unreasonably.
		 */
		if (inglobal == 0) {
			flush();
			if (!hush && value(PROMPT) && !globp && !noprompt && endline) {
				ex_putchar(':');
				hadpr = 1;
			}
			TSYNC();
		}

		/*
		 * Gobble up the address.
		 * Degenerate addresses yield ".".
		 */
		addr2 = 0;
		given = seensemi = 0;
		do {
			addr1 = addr2;
			addr = address(0);
			c = getcd();
			if (addr == 0) {
				if (c == ',')
					addr = dot;
				else if (addr1 != 0) {
					addr2 = dot;
					break;
				} else
					break;
			}
			addr2 = addr;
			given++;
			if (c == ';') {
				c = ',';
				dot = addr;
				seensemi = 1;
			}
		} while (c == ',');
		if (c == '%') {
			/* %: same as 1,$ */
			addr1 = one;
			addr2 = dol;
			given = 2;
			c = ex_getchar();
		}
		if (addr1 == 0)
			addr1 = addr2;
		if (c == ':')
			c = ex_getchar();

		/*
		 * Set command name for special character commands.
		 */
		tailspec(c);

		/*
		 * If called via : escape from open or visual, limit
		 * the set of available commands here to save work below.
		 */
		if (inopen) {
			if (c=='\n' || c=='\r' || c==CTRL('d') || c==EOF) {
				if (addr2)
					dot = addr2;
				if (c == EOF)
					return;
				continue;
			}
			if (any(c, "o"))
notinvis:
				tailprim(Command, 1, 1);
		}
		switch (c) {

		case 'a':

			switch(peekchar()) {
			case 'b':
/* abbreviate */
				tail("abbreviate");
				setnoaddr();
				mapcmd(0, 1);
				anyabbrs = 1;
				continue;
			case 'r':
/* args */
				tail("args");
				setnoaddr();
				eol();
				pargs();
				continue;
			}

/* append */
			if (inopen)
				goto notinvis;
			tail("append");
			setdot();
			aiflag = exclam();
			ex_newline();
			vmacchng(0);
			deletenone();
			setin(addr2);
			inappend = 1;
			ignore(append(gettty, addr2));
			inappend = 0;
			nochng();
			continue;

		case 'c':
			switch (peekchar()) {

/* copy */
			case 'o':
				tail("copy");
				vmacchng(0);
				move();
				continue;

#ifdef CHDIR
/* cd */
			case 'd':
				tail("cd");
				goto changdir;

/* chdir */
			case 'h':
				ignchar();
				if (peekchar() == 'd') {
					register char *p;
					tail2of("chdir");
changdir:
					if (savedfile[0] == '/' || !value(WARN))
						ignore(exclam());
					else
						ignore(quickly());
					if (skipend()) {
						p = getenv("HOME");
						if (p == NULL)
							error("Home directory unknown");
					} else
						getone(), p = file;
					eol();
					if (chdir(p) < 0)
						filioerr(p);
					if (savedfile[0] != '/')
						edited = 0;
					continue;
				}
				if (inopen)
					tailprim("change", 2, 1);
				tail2of("change");
				break;

#endif
			default:
				if (inopen)
					goto notinvis;
				tail("change");
				break;
			}
/* change */
			aiflag = exclam();
			setCNL();
			vmacchng(0);
			setin(addr1);
			delete(0);
			inappend = 1;
			ignore(append(gettty, addr1 - 1));
			inappend = 0;
			nochng();
			continue;

/* delete */
		case 'd':
			/*
			 * Caution: dp and dl have special meaning already.
			 */
			tail("delete");
			c = cmdreg();
			setCNL();
			vmacchng(0);
			if (c)
				YANKreg(c);
			delete(0);
			appendnone();
			continue;

/* edit */
/* ex */
		case 'e':
			tail(peekchar() == 'x' ? "ex" : "edit");
editcmd:
			if (!exclam() && chng)
				c = 'E';
			filename(c);
			if (c == 'E') {
				ungetchar(lastchar());
				ignore(quickly());
			}
			setnoaddr();
doecmd:
			init();
			addr2 = zero;
			laste++;
			ex_sync();
			rop(c);
			nochng();
			continue;

/* file */
		case 'f':
			tail("file");
			setnoaddr();
			filename(c);
			noonl();
/*
			synctmp();
*/
			continue;

/* global */
		case 'g':
			tail("global");
			global(!exclam());
			nochng();
			continue;

/* insert */
		case 'i':
			if (inopen)
				goto notinvis;
			tail("insert");
			setdot();
			nonzero();
			aiflag = exclam();
			ex_newline();
			vmacchng(0);
			deletenone();
			setin(addr2);
			inappend = 1;
			ignore(append(gettty, addr2 - 1));
			inappend = 0;
			if (dot == zero && dol > zero)
				dot = one;
			nochng();
			continue;

/* join */
		case 'j':
			tail("join");
			c = exclam();
			setcount();
			nonzero();
			ex_newline();
			vmacchng(0);
			if (given < 2 && addr2 != dol)
				addr2++;
			join(c);
			continue;

/* k */
		case 'k':
casek:
			pastwh();
			c = ex_getchar();
			if (endcmd(c))
				serror("Mark what?|%s requires following letter", Command);
			ex_newline();
			if (!islower(c))
				error("Bad mark|Mark must specify a letter");
			setdot();
			nonzero();
			names[c - 'a'] = *addr2 &~ 01;
			anymarks = 1;
			continue;

/* list */
		case 'l':
			tail("list");
			setCNL();
			ignorf(setlist(1));
			pflag = 0;
			goto print;

		case 'm':
			if (peekchar() == 'a') {
				ignchar();
				if (peekchar() == 'p') {
/* map */
					tail2of("map");
					setnoaddr();
					mapcmd(0, 0);
					continue;
				}
/* mark */
				tail2of("mark");
				goto casek;
			}
/* move */
			tail("move");
			vmacchng(0);
			move();
			continue;

		case 'n':
			if (peekchar() == 'u') {
				tail("number");
				goto numberit;
			}
/* next */
			tail("next");
			setnoaddr();
			ckaw();
			ignore(quickly());
			if (getargs())
				makargs();
			next();
			c = 'e';
			filename(c);
			goto doecmd;

/* open */
		case 'o':
			tail("open");
			oop();
			pflag = 0;
			nochng();
			continue;

		case 'p':
		case 'P':
			switch (peekchar()) {

/* put */
			case 'u':
				tail("put");
				setdot();
				c = cmdreg();
				eol();
				vmacchng(0);
				if (c)
					putreg(c);
				else
					put();
				continue;

			case 'r':
				ignchar();
				if (peekchar() == 'e') {
/* preserve */
					tail2of("preserve");
					eol();
					if (preserve() == 0)
						error("Preserve failed!");
					else
						error("File preserved.");
				}
				tail2of("print");
				break;

			default:
				tail("print");
				break;
			}
/* print */
			setCNL();
			pflag = 0;
print:
			nonzero();
			if (CL && span() > EX_LINES) {
				flush1();
				vclear();
			}
			plines(addr1, addr2, 1);
			continue;

/* quit */
		case 'q':
			tail("quit");
			setnoaddr();
			c = quickly();
			eol();
			if (!c)
quit:
				nomore();
			if (inopen) {
				vgoto(WECHO, 0);
				if (!ateopr())
					vnfl();
				else {
					tostop();
				}
				flush();
				setty(normf);
			}
			cleanup(1);
			ex_exit(0);

		case 'r':
			if (peekchar() == 'e') {
				ignchar();
				switch (peekchar()) {

/* rewind */
				case 'w':
					tail2of("rewind");
					setnoaddr();
					if (!exclam()) {
						ckaw();
						if (chng && dol > zero)
							error("No write@since last chage (:rewind! overrides)");
					}
					eol();
					erewind();
					next();
					c = 'e';
					ungetchar(lastchar());
					filename(c);
					goto doecmd;

/* recover */
				case 'c':
					tail2of("recover");
					setnoaddr();
					c = 'e';
					if (!exclam() && chng)
						c = 'E';
					filename(c);
					if (c == 'E') {
						ungetchar(lastchar());
						ignore(quickly());
					}
					init();
					addr2 = zero;
					laste++;
					ex_sync();
					recover();
					rop2();
					revocer();
					if (status == 0)
						rop3(c);
					if (dol != zero)
						change();
					nochng();
					continue;
				}
				tail2of("read");
			} else
				tail("read");
/* read */
			if (savedfile[0] == 0 && dol == zero)
				c = 'e';
			pastwh();
			vmacchng(0);
			if (peekchar() == '!') {
				setdot();
				ignchar();
				unix0(0);
				filter(0);
				continue;
			}
			filename(c);
			rop(c);
			nochng();
			if (inopen && endline && addr1 > zero && addr1 < dol)
				dot = addr1 + 1;
			continue;

		case 's':
			switch (peekchar()) {
			/*
			 * Caution: 2nd char cannot be c, g, or r
			 * because these have meaning to substitute.
			 */

/* set */
			case 'e':
				tail("set");
				setnoaddr();
				set();
				continue;

/* shell */
			case 'h':
				tail("shell");
				setNAEOL();
				vnfl();
				putpad(TE);
				flush();
				unixwt(1, unixex("-i", (char *) 0, 0, 0));
				vcontin(0);
				continue;

/* source */
			case 'o':
#ifdef notdef
				if (inopen)
					goto notinvis;
#endif
				tail("source");
				setnoaddr();
				getone();
				eol();
				source(file, 0);
				continue;
#ifdef SIGTSTP
/* stop, suspend */
			case 't':
				tail("stop");
				goto suspend;
			case 'u':
				tail("suspend");
suspend:
				if (!dosusp)
					error("Old tty driver|Not using new tty driver/shell");
				c = exclam();
				eol();
				if (!c)
					ckaw();
				onsusp(0);
				continue;
#endif

			}
			/* fall into ... */

/* & */
/* ~ */
/* substitute */
		case '&':
		case '~':
			Command = "substitute";
			if (c == 's')
				tail(Command);
			vmacchng(0);
			if (!substitute(c))
				pflag = 0;
			continue;

/* t */
		case 't':
			if (peekchar() == 'a') {
				tail("tag");
				tagfind(exclam());
				if (!inopen)
					lchng = chng - 1;
				else
					nochng();
				continue;
			}
			tail("t");
			vmacchng(0);
			move();
			continue;

		case 'u':
			if (peekchar() == 'n') {
				ignchar();
				switch(peekchar()) {
/* unmap */
				case 'm':
					tail2of("unmap");
					setnoaddr();
					mapcmd(1, 0);
					continue;
/* unabbreviate */
				case 'a':
					tail2of("unabbreviate");
					setnoaddr();
					mapcmd(1, 1);
					anyabbrs = 1;
					continue;
				}
/* undo */
				tail2of("undo");
			} else
				tail("undo");
			setnoaddr();
			markDOT();
			c = exclam();
			ex_newline();
			undo(c);
			continue;

		case 'v':
			switch (peekchar()) {

			case 'e':
/* version */
				tail("version");
				setNAEOL();
				ex_printf("@(#) Version 3.6, 11/3/80"
				    " (4.0BSD).  git "
				    "160803 14:24"
				    +5);
				noonl();
				continue;

/* visual */
			case 'i':
				tail("visual");
				if (inopen) {
					c = 'e';
					goto editcmd;
				}
				vop();
				pflag = 0;
				nochng();
				continue;
			}
/* v */
			tail("v");
			global(0);
			nochng();
			continue;

/* write */
		case 'w':
			c = peekchar();
			tail(c == 'q' ? "wq" : "write");
wq:
			if (skipwh() && peekchar() == '!') {
				pofix();
				ignchar();
				setall();
				unix0(0);
				filter(1);
			} else {
				setall();
				wop(1);
				nochng();
			}
			if (c == 'q')
				goto quit;
			continue;

/* xit */
		case 'x':
			tail("xit");
			if (!chng)
				goto quit;
			c = 'q';
			goto wq;

/* yank */
		case 'y':
			tail("yank");
			c = cmdreg();
			setcount();
			eol();
			vmacchng(0);
			if (c)
				YANKreg(c);
			else
				yank();
			continue;

/* z */
		case 'z':
			zop(0);
			pflag = 0;
			continue;

/* * */
/* @ */
		case '*':
		case '@':
			c = ex_getchar();
			if (c=='\n' || c=='\r')
				ungetchar(c);
			if (any(c, "@*\n\r"))
				c = lastmac;
			if (isupper(c))
				c = tolower(c);
			if (!islower(c))
				error("Bad register");
			ex_newline();
			setdot();
			cmdmac(c);
			continue;

/* | */
		case '|':
			endline = 0;
			goto caseline;

/* \n */
		case '\n':
			endline = 1;
caseline:
			notempty();
			if (addr2 == 0) {
				if (UP != NOSTR && c == '\n' && !inglobal)
					c = CTRL('k');
				if (inglobal)
					addr1 = addr2 = dot;
				else {
					if (dot == dol)
						error("At EOF|At end-of-file");
					addr1 = addr2 = dot + 1;
				}
			}
			setdot();
			nonzero();
			if (seensemi)
				addr1 = addr2;
			ex_getline(*addr1);
			if (c == CTRL('k')) {
				flush1();
				destline--;
				if (hadpr)
					shudclob = 1;
			}
			plines(addr1, addr2, 1);
			continue;

/* " */
		case '"':
			comment();
			continue;

/* # */
		case '#':
numberit:
			setCNL();
			ignorf(setnumb(1));
			pflag = 0;
			goto print;

/* = */
		case '=':
			ex_newline();
			setall();
			if (inglobal == 2)
				pofix();
			ex_printf("%d", lineno(addr2));
			noonl();
			continue;

/* ! */
		case '!':
			if (addr2 != 0) {
				vmacchng(0);
				unix0(0);
				setdot();
				filter(2);
			} else {
				unix0(1);
				pofix();
				putpad(TE);
				flush();
				unixwt(1, unixex("-c", uxb, 0, 0));
				vclrech(1);	/* vcontin(0); */
				nochng();
			}
			continue;

/* < */
/* > */
		case '<':
		case '>':
			for (cnt = 1; peekchar() == c; cnt++)
				ignchar();
			setCNL();
			vmacchng(0);
			shift(c, cnt);
			continue;

/* ^D */
/* EOF */
		case CTRL('d'):
		case EOF:
			if (exitoneof) {
				if (addr2 != 0)
					dot = addr2;
				return;
			}
			if (!isatty(0)) {
				if (intty)
					/*
					 * Chtty sys call at UCB may cause a
					 * input which was a tty to suddenly be
					 * turned into /dev/null.
					 */
					onhup(0);
				return;
			}
			if (addr2 != 0) {
				setlastchar('\n');
				putnl();
			}
			if (dol == zero) {
				if (addr2 == 0)
					putnl();
				notempty();
			}
			ungetchar(EOF);
			zop(hadpr);
			continue;

		default:
			if (!isalpha(c))
				break;
			ungetchar(c);
			tailprim("", 0, 0);
		}
		ierror("What?|Unknown command character '%c'", c);
	}
}
Beispiel #17
0
 ~puts_write(){flush1();}