Beispiel #1
0
/* Write header to the given output stream */
static void
printheader(FILE *fout, const char *info)
{
	extern char	VersionID[];
						/* copy octree header */
	if (octname[0] == '!') {
		newheader("RADIANCE", fout);
		fputs(octname+1, fout);
		if (octname[strlen(octname)-1] != '\n')
			fputc('\n', fout);
	} else {
		FILE	*fin = fopen(octname, (outfmt=='a') ? "r" : "rb");
		if (fin == NULL)
			quit(1);
		checkheader(fin, OCTFMT, fout);
		fclose(fin);
	}
	printargs(gargc-1, gargv, fout);	/* add our command */
	fprintf(fout, "SOFTWARE= %s\n", VersionID);
	fputnow(fout);
	fputs("NCOMP=3\n", fout);		/* always RGB */
	if (info != NULL)			/* add extra info if given */
		fputs(info, fout);
	fputformat(formstr(outfmt), fout);
	fputc('\n', fout);			/* empty line ends header */
}
Beispiel #2
0
static void
initambfile(		/* initialize ambient file */
	int  cre8
)
{
	extern char  *progname, *octname;
	static char  *mybuf = NULL;

#ifdef	F_SETLKW
	aflock(cre8 ? F_WRLCK : F_RDLCK);
#endif
	SET_FILE_BINARY(ambfp);
	if (mybuf == NULL)
		mybuf = (char *)bmalloc(BUFSIZ+8);
	setbuf(ambfp, mybuf);
	if (cre8) {			/* new file */
		newheader("RADIANCE", ambfp);
		fprintf(ambfp, "%s -av %g %g %g -aw %d -ab %d -aa %g ",
				progname, colval(ambval,RED),
				colval(ambval,GRN), colval(ambval,BLU),
				ambvwt, ambounce, ambacc);
		fprintf(ambfp, "-ad %d -as %d -ar %d ",
				ambdiv, ambssamp, ambres);
		if (octname != NULL)
			fputs(octname, ambfp);
		fputc('\n', ambfp);
		fprintf(ambfp, "SOFTWARE= %s\n", VersionID);
		fputnow(ambfp);
		fputformat(AMBFMT, ambfp);
		fputc('\n', ambfp);
		putambmagic(ambfp);
	} else if (checkheader(ambfp, AMBFMT, NULL) < 0 || !hasambmagic(ambfp))
		error(USER, "bad ambient file");
}
Beispiel #3
0
void
writepict(				/* write the picture to a file */
	char  *s
)
{
	static char  buf[128];
	char  *fname;
	FILE  *fp;
	COLR  *scanline;
	int  y;
				/* XXX relies on words.c 2.11 behavior */
	if (nextword(buf, sizeof(buf), s) == NULL && !buf[0]) {
		error(COMMAND, "no file");
		return;
	}
	if ((fname = getpath(buf, NULL, 0)) == NULL ||
			(fp = fopen(fname, "w")) == NULL) {
		sprintf(errmsg, "cannot open \"%s\"", buf);
		error(COMMAND, errmsg);
		return;
	}
	SET_FILE_BINARY(fp);
	(*dev->comout)("writing \"");
	(*dev->comout)(fname);
	(*dev->comout)("\"...\n");
						/* write header */
	newheader("RADIANCE", fp);
	fputs(progname, fp);
	fprintview(&ourview, fp);
	if (octname != NULL)
		fprintf(fp, " %s\n", octname);
	else
		putc('\n', fp);
	fprintf(fp, "SOFTWARE= %s\n", VersionID);
	fputnow(fp);
	if (exposure != 1.0)
		fputexpos(exposure, fp);
	if (dev->pixaspect != 1.0)
		fputaspect(dev->pixaspect, fp);
	fputformat(COLRFMT, fp);
	putc('\n', fp);
	fprtresolu(hresolu, vresolu, fp);

	scanline = (COLR *)malloc(hresolu*sizeof(COLR));
	if (scanline == NULL) {
		error(COMMAND, "not enough memory!");
		fclose(fp);
		unlink(fname);
		return;
	}
	for (y = vresolu-1; y >= 0; y--) {
		getpictcolrs(y, scanline, &ptrunk, hresolu, vresolu);
		if (fwritecolrs(scanline, hresolu, fp) < 0)
			break;
	}
	free((void *)scanline);
	if (fclose(fp) < 0)
		error(COMMAND, "write error");
}
Beispiel #4
0
/* Write our BSDF mesh interpolant out to the given binary stream */
void
save_bsdf_rep(FILE *ofp)
{
	RBFNODE		*rbf;
	MIGRATION	*mig;
	int		i, n;
					/* finish header */
	fprintf(ofp, "SYMMETRY=%d\n", !single_plane_incident * inp_coverage);
	fprintf(ofp, "IO_SIDES= %d %d\n", input_orient, output_orient);
	fprintf(ofp, "GRIDRES=%d\n", grid_res);
	fprintf(ofp, "BSDFMIN=%g\n", bsdf_min);
	fputformat(BSDFREP_FMT, ofp);
	fputc('\n', ofp);
					/* write each DSF */
	for (rbf = dsf_list; rbf != NULL; rbf = rbf->next) {
		putint(rbf->ord, 4, ofp);
		putflt(rbf->invec[0], ofp);
		putflt(rbf->invec[1], ofp);
		putflt(rbf->invec[2], ofp);
		putflt(rbf->vtotal, ofp);
		putint(rbf->nrbf, 4, ofp);
		for (i = 0; i < rbf->nrbf; i++) {
			putflt(rbf->rbfa[i].peak, ofp);
			putint(rbf->rbfa[i].crad, 2, ofp);
			putint(rbf->rbfa[i].gx, 1, ofp);
			putint(rbf->rbfa[i].gy, 1, ofp);
		}
	}
	putint(-1, 4, ofp);		/* terminator */
					/* write each migration matrix */
	for (mig = mig_list; mig != NULL; mig = mig->next) {
		int	zerocnt = 0;
		putint(mig->rbfv[0]->ord, 4, ofp);
		putint(mig->rbfv[1]->ord, 4, ofp);
					/* write out as sparse data */
		n = mtx_nrows(mig) * mtx_ncols(mig);
		for (i = 0; i < n; i++) {
			if (zerocnt == 0xff) {
				putint(0xff, 1, ofp); zerocnt = 0;
			}
			if (mig->mtx[i] != 0) {
				putint(zerocnt, 1, ofp); zerocnt = 0;
				putflt(mig->mtx[i], ofp);
			} else
				++zerocnt;
		}
		putint(zerocnt, 1, ofp);
	}
	putint(-1, 4, ofp);		/* terminator */
	putint(-1, 4, ofp);
	if (fflush(ofp) == EOF) {
		fprintf(stderr, "%s: error writing BSDF interpolant\n",
				progname);
		exit(1);
	}
}
Beispiel #5
0
/* Write matrix to file type indicated by dtype */
int
rmx_write(const RMATRIX *rm, int dtype, FILE *fp)
{
	RMATRIX	*mydm = NULL;
	int	ok = 1;

	if ((rm == NULL) | (fp == NULL))
		return(0);
						/* complete header */
	if (rm->info)
		fputs(rm->info, fp);
	if (dtype == DTfromHeader)
		dtype = rm->dtype;
	else if ((dtype == DTrgbe) & (rm->dtype == DTxyze))
		dtype = DTxyze;
	else if ((dtype == DTxyze) & (rm->dtype == DTrgbe))
		dtype = DTrgbe;
	if ((dtype != DTrgbe) & (dtype != DTxyze)) {
		fprintf(fp, "NROWS=%d\n", rm->nrows);
		fprintf(fp, "NCOLS=%d\n", rm->ncols);
		fprintf(fp, "NCOMP=%d\n", rm->ncomp);
	} else if (rm->ncomp != 3) {		/* wrong # components? */
		double	cmtx[3];
		if (rm->ncomp != 1)		/* only convert grayscale */
			return(0);
		cmtx[0] = cmtx[1] = cmtx[2] = 1;
		mydm = rmx_transform(rm, 3, cmtx);
		if (mydm == NULL)
			return(0);
		rm = mydm;
	}
	fputformat((char *)cm_fmt_id[dtype], fp);
	fputc('\n', fp);
	switch (dtype) {			/* write data */
	case DTascii:
		ok = rmx_write_ascii(rm, fp);
		break;
	case DTfloat:
		ok = rmx_write_float(rm, fp);
		break;
	case DTdouble:
		ok = rmx_write_double(rm, fp);
		break;
	case DTrgbe:
	case DTxyze:
		fprtresolu(rm->ncols, rm->nrows, fp);
		ok = rmx_write_rgbe(rm, fp);
		break;
	default:
		return(0);
	}
	ok &= (fflush(fp) == 0);
	rmx_free(mydm);
	return(ok);
}
static void
picdebug(void)			/* put out debugging picture */
{
	static COLOR	blkcol = BLKCOLOR;
	COLOR	*scan;
	int	y, i;
	register int	x, rg;

	if (fseek(stdin, 0L, 0) == EOF) {
		fprintf(stderr, "%s: cannot seek on input picture\n", progname);
		exit(1);
	}
	getheader(stdin, NULL, NULL);		/* skip input header */
	fgetresolu(&xmax, &ymax, stdin);
						/* allocate scanline */
	scan = (COLOR *)malloc(xmax*sizeof(COLOR));
	if (scan == NULL) {
		perror(progname);
		exit(1);
	}
						/* finish debug header */
	fputformat(COLRFMT, debugfp);
	putc('\n', debugfp);
	fprtresolu(xmax, ymax, debugfp);
						/* write debug picture */
	for (y = ymax-1; y >= 0; y--) {
		if (freadscan(scan, xmax, stdin) < 0) {
			fprintf(stderr, "%s: error rereading input picture\n",
					progname);
			exit(1);
		}
		for (x = 0; x < xmax; x++) {
			rg = chartndx(x, y, &i);
			if (rg == RG_CENT) {
				if (!(1L<<i & gmtflags) || (x+y)&07) {
					copycolor(scan[x], mbRGB[i]);
					clipgamut(scan[x], bright(scan[x]),
						CGAMUT, colmin, colmax);
				} else
					copycolor(scan[x], blkcol);
			} else if (rg == RG_CORR)
				cvtcolor(scan[x], scan[x]);
			else if (rg != RG_ORIG)
				copycolor(scan[x], blkcol);
		}
		if (fwritescan(scan, xmax, debugfp) < 0) {
			fprintf(stderr, "%s: error writing debugging picture\n",
					progname);
			exit(1);
		}
	}
						/* clean up */
	fclose(debugfp);
	free((void *)scan);
}
Beispiel #7
0
static void
mapimage(void)				/* map picture and send to stdout */
{
	COLOR	*scan;

	comphist();			/* generate adaptation histogram */
	check2do();			/* modify what2do flags */
	if (what2do&DO_VEIL)
		compveil();		/* compute veil image */
	if (!(what2do&DO_LINEAR))
		if (mkbrmap() < 0)	/* make tone map */
			what2do |= DO_LINEAR;	/* failed! -- use linear */
#if ADJ_VEIL
		else if (what2do&DO_VEIL)
			adjveil();	/* else adjust veil image */
#endif
	if (what2do&DO_LINEAR) {
		if (scalef <= FTINY) {
			if (what2do&DO_HSENS)
				scalef = htcontrs(Lb(0.5*(Bldmax+Bldmin))) /
						htcontrs(Lb(bwavg));
			else
				scalef = Lb(0.5*(Bldmax+Bldmin)) / Lb(bwavg);
			scalef *= WHTEFFICACY/(inpexp*ldmax);
		}
		fputexpos(inpexp*scalef, stdout);	/* record exposure */
		if (lumf == cielum) scalef /= WHTEFFICACY;
	}
	fputformat(COLRFMT, stdout);	/* complete header */
	putchar('\n');
	fputsresolu(&inpres, stdout);	/* resolution doesn't change */
					/* condition our image */
	for (scan = firstscan(); scan != NULL; scan = nextscan())
		if (fwritescan(scan, scanlen(&inpres), stdout) < 0) {
			fprintf(stderr, "%s: scanline write error\n",
					progname);
			exit(1);
		}
}
Beispiel #8
0
int
main(
	int  argc,
	char  *argv[]
)
{
	int  ncolumns = 0;
	int  autolabel = 0;
	int  curcol = 0, x0 = 0, curx = 0, cury = 0, spacing = 0;
	int  xsgn, ysgn;
	char  *thislabel;
	int  an;
	SET_DEFAULT_BINARY();
	SET_FILE_BINARY(stdin);
	SET_FILE_BINARY(stdout);
	progname = argv[0];

	for (an = 1; an < argc && argv[an][0] == '-'; an++)
		switch (argv[an][1]) {
		case 'h':
			echoheader = !echoheader;
			break;
		case 'x':
			xsiz = atoi(argv[++an]);
			break;
		case 'y':
			ysiz = atoi(argv[++an]);
			break;
		case 'b':
			setcolr(bgcolr, atof(argv[an+1]),
					atof(argv[an+2]),
					atof(argv[an+3]));
			an += 3;
			break;
		case 'a':
			ncolumns = atoi(argv[++an]);
			break;
		case 's':
			spacing = atoi(argv[++an]);
			break;
		case 'o':
			curx = x0 = atoi(argv[++an]);
			cury = atoi(argv[++an]);
			break;
		case 'l':
			switch (argv[an][2]) {
			case 'a':
				autolabel++;
				break;
			case 'h':
				labelht = atoi(argv[++an]);
				break;
			case '\0':
				goto dofiles;
			default:
				goto userr;
			}
			break;
		case '\0':
		case 't':
			goto dofiles;
		default:
			goto userr;
		}
dofiles:
	newheader("RADIANCE", stdout);
	fputnow(stdout);
	for (nfile = 0; an < argc; nfile++) {
		if (nfile >= MAXFILE)
			goto toomany;
		thislabel = NULL;
		input[nfile].flags = 0;
		xsgn = ysgn = '-';
		while (an < argc && (argv[an][0] == '-' || argv[an][0] == '+'
				|| argv[an][0] == '=')) {
			switch (argv[an][1]) {
			case 't':
				checkthresh = 1;
				if (argv[an][0] == '-') {
					input[nfile].flags |= HASMIN;
					input[nfile].thmin = atof(argv[an+1]);
				} else if (argv[an][0] == '+') {
					input[nfile].flags |= HASMAX;
					input[nfile].thmax = atof(argv[an+1]);
				} else
					goto userr;
				an++;
				break;
			case 'l':
				if (strcmp(argv[an], "-l"))
					goto userr;
				thislabel = argv[++an];
				break;
			case '+':
			case '-':
			case '0':
				if (argv[an][0] != '=')
					goto userr;
				xsgn = argv[an][1];
				ysgn = argv[an][2];
				if (ysgn != '+' && ysgn != '-' && ysgn != '0')
					goto userr;
				break;
			case '\0':
				if (argv[an][0] == '-')
					goto getfile;
				goto userr;
			default:
				goto userr;
			}
			an++;
		}
getfile:
		if (argc-an < (ncolumns ? 1 : 3))
			goto userr;
		if (autolabel && thislabel == NULL)
			thislabel = argv[an];
		if (!strcmp(argv[an], "-")) {
			input[nfile].name = StandardInput;
			input[nfile].fp = stdin;
		} else {
			if (argv[an][0] == '!') {
				input[nfile].name = Command;
				input[nfile].fp = popen(argv[an]+1, "r");
			} else {
				input[nfile].name = argv[an];
				input[nfile].fp = fopen(argv[an], "r");
			}
			if (input[nfile].fp == NULL) {
				perror(argv[an]);
				quit(1);
			}
		}
		an++;
						/* get header */
		if (echoheader)
			printf("%s:\n", input[nfile].name);
		getheader(input[nfile].fp, headline, NULL);
		if (wrongformat) {
			fprintf(stderr, "%s: incompatible input format\n",
					input[nfile].name);
			quit(1);
		}
						/* get picture size */
		if (fgetresolu(&input[nfile].xres, &input[nfile].yres,
				input[nfile].fp) < 0) {
			fprintf(stderr, "%s: bad picture size\n",
					input[nfile].name);
			quit(1);
		}
		if (ncolumns > 0) {
			if (curcol >= ncolumns) {
				cury = ymax + spacing;
				curx = x0;
				curcol = 0;
			}
			input[nfile].xloc = curx;
			input[nfile].yloc = cury;
			curx += input[nfile].xres + spacing;
			curcol++;
		} else {
			input[nfile].xloc = atoi(argv[an++]);
			if (xsgn == '+')
				input[nfile].xloc -= input[nfile].xres;
			else if (xsgn == '0')
				input[nfile].xloc -= input[nfile].xres/2;
			input[nfile].yloc = atoi(argv[an++]);
			if (ysgn == '+')
				input[nfile].yloc -= input[nfile].yres;
			else if (ysgn == '0')
				input[nfile].yloc -= input[nfile].yres/2;
		}
		if (input[nfile].xloc < xmin)
			xmin = input[nfile].xloc;
		if (input[nfile].yloc < ymin)
			ymin = input[nfile].yloc;
		if (input[nfile].xloc+input[nfile].xres > xmax)
			xmax = input[nfile].xloc+input[nfile].xres;
		if (input[nfile].yloc+input[nfile].yres > ymax)
			ymax = input[nfile].yloc+input[nfile].yres;
		if (thislabel != NULL) {
			if (++nfile >= MAXFILE)
				goto toomany;
			input[nfile].name = Label;
			input[nfile].flags = 0;
			input[nfile].xres = input[nfile-1].xres;
			input[nfile].yres = labelht;
			if ((input[nfile].fp = lblopen(thislabel,
					&input[nfile].xres,
					&input[nfile].yres)) == NULL)
				goto labelerr;
			input[nfile].xloc = input[nfile-1].xloc;
			input[nfile].yloc = input[nfile-1].yloc +
					input[nfile-1].yres-input[nfile].yres;
		}
	}
	if (xsiz <= 0)
		xsiz = xmax;
	else if (xsiz > xmax)
		xmax = xsiz;
	if (ysiz <= 0)
		ysiz = ymax;
	else if (ysiz > ymax)
		ymax = ysiz;
					/* add new header info. */
	printargs(argc, argv, stdout);
	if (strcmp(ourfmt, PICFMT))
		fputformat(ourfmt, stdout);	/* print format if known */
	putchar('\n');
	fprtresolu(xsiz, ysiz, stdout);

	compos();
	
	quit(0);
userr:
	fprintf(stderr,
	"Usage: %s [-h][-x xr][-y yr][-b r g b][-a n][-s p][-o x0 y0][-la][-lh h] ",
			progname);
	fprintf(stderr, "[-t min1][+t max1][-l lab][=SS] pic1 x1 y1 ..\n");
	quit(1);
toomany:
	fprintf(stderr, "%s: only %d files and labels allowed\n",
			progname, MAXFILE);
	quit(1);
labelerr:
	fprintf(stderr, "%s: error opening label\n", progname);
	quit(1);
	return 1; /* pro forma return */
}
Beispiel #9
0
int
main(		/* compile a .OBJ file into a mesh */
	int  argc,
	char  *argv[]
)
{
	int  nmatf = 0;
	char  pathnames[12800];
	char  *pns = pathnames;
	char  *matinp[128];
	char  *cp;
	int  i, j;

	progname = argv[0];
	ofun[OBJ_FACE].funp = o_face;

	for (i = 1; i < argc && argv[i][0] == '-'; i++)
		switch (argv[i][1]) {
		case 'n':				/* set limit */
			objlim = atoi(argv[++i]);
			break;
		case 'r':				/* resolution limit */
			resolu = atoi(argv[++i]);
			break;
		case 'a':				/* material file */
			matinp[nmatf++] = argv[++i];
			break;
		case 'l':				/* library material */
			cp = getpath(argv[++i], getrlibpath(), R_OK);
			if (cp == NULL) {
				sprintf(errmsg,
					"cannot find library material: '%s'",
						argv[i]);
				error(USER, errmsg);
			}
			matinp[nmatf++] = strcpy(pns, cp);
			while (*pns++)
				;
			break;
		case 'w':				/* supress warnings */
			nowarn = 1;
			break;
		default:
			sprintf(errmsg, "unknown option: '%s'", argv[i]);
			error(USER, errmsg);
			break;
		}

	if (i < argc-2)
		error(USER, "too many file arguments");
					/* initialize mesh */
	cvinit(i==argc-2 ? argv[i+1] : "<stdout>");
					/* load material input */
	for (j = 0; j < nmatf; j++)
		readobj(matinp[j]);
					/* read .OBJ file into triangles */
	if (i == argc)
		wfreadobj(NULL);
	else
		wfreadobj(argv[i]);
	
	cvmeshbounds();			/* set octree boundaries */

	if (i == argc-2)		/* open output file */
		if (freopen(argv[i+1], "w", stdout) == NULL)
			error(SYSTEM, "cannot open output file");
	SET_FILE_BINARY(stdout);
	newheader("RADIANCE", stdout);	/* new binary file header */
	printargs(i<argc ? i+1 : argc, argv, stdout);
	fputformat(MESHFMT, stdout);
	fputc('\n', stdout);

	mincusize = ourmesh->mcube.cusize / resolu - FTINY;

	for (i = 0; i < nobjects; i++)	/* add triangles to octree */
		if (objptr(i)->otype == OBJ_FACE)
			addface(&ourmesh->mcube, i);

					/* optimize octree */
	ourmesh->mcube.cutree = combine(ourmesh->mcube.cutree);

	if (ourmesh->mcube.cutree == EMPTY)
		error(WARNING, "mesh is empty");
	
	cvmesh();			/* convert mesh and leaf nodes */

	writemesh(ourmesh, stdout);	/* write mesh to output */
	
	/* printmeshstats(ourmesh, stderr); */

	quit(0);
	return 0; /* pro forma return */
}
Beispiel #10
0
int
main(		/* convert object files to an octree */
	int  argc,
	char  *argv[]
)
{
	FVECT  bbmin, bbmax;
	char  *infile = NULL;
	int  inpfrozen = 0;
	int  outflags = IO_ALL;
	OBJECT	startobj;
	int  i;

	progname = argv[0] = fixargv0(argv[0]);

	ot_initotypes();

	for (i = 1; i < argc && argv[i][0] == '-'; i++)
		switch (argv[i][1]) {
		case '\0':				/* scene from stdin */
			goto breakopt;
		case 'i':				/* input octree */
			infile = argv[++i];
			break;
		case 'b':				/* bounding cube */
			thescene.cuorg[0] = atof(argv[++i]) - OMARGIN;
			thescene.cuorg[1] = atof(argv[++i]) - OMARGIN;
			thescene.cuorg[2] = atof(argv[++i]) - OMARGIN;
			thescene.cusize = atof(argv[++i]) + 2*OMARGIN;
			break;
		case 'n':				/* set limit */
			objlim = atoi(argv[++i]);
			break;
		case 'r':				/* resolution limit */
			resolu = atoi(argv[++i]);
			break;
		case 'f':				/* freeze octree */
			outflags &= ~IO_FILES;
			break;
		case 'w':				/* supress warnings */
			nowarn = 1;
			break;
		default:
			sprintf(errmsg, "unknown option: '%s'", argv[i]);
			error(USER, errmsg);
			break;
		}
breakopt:
	SET_FILE_BINARY(stdout);
	if (infile != NULL) {		/* get old octree & objects */
		if (thescene.cusize > FTINY)
			error(USER, "only one of '-b' or '-i'");
		nfiles = readoct(infile, IO_ALL, &thescene, ofname);
		if (nfiles == 0)
			inpfrozen++;
	} else
		newheader("RADIANCE", stdout);	/* new binary file header */
	printargs(argc, argv, stdout);
	fputformat(OCTFMT, stdout);
	printf("\n");

	startobj = nobjects;		/* previous objects already converted */

	for ( ; i < argc; i++)		/* read new scene descriptions */
		if (!strcmp(argv[i], "-")) {	/* from stdin */
			readobj(NULL);
			outflags &= ~IO_FILES;
		} else {			/* from file */
			if (nfiles >= MAXOBJFIL)
				error(INTERNAL, "too many scene files");
			readobj(ofname[nfiles++] = argv[i]);
		}

	ofname[nfiles] = NULL;

	if (inpfrozen && outflags & IO_FILES) {
		error(WARNING, "frozen octree");
		outflags &= ~IO_FILES;
	}
						/* find bounding box */
	bbmin[0] = bbmin[1] = bbmin[2] = FHUGE;
	bbmax[0] = bbmax[1] = bbmax[2] = -FHUGE;
	for (i = startobj; i < nobjects; i++)
		add2bbox(objptr(i), bbmin, bbmax);
						/* set/check cube */
	if (thescene.cusize == 0.0) {
		if (bbmin[0] <= bbmax[0]) {
			for (i = 0; i < 3; i++) {
				bbmin[i] -= OMARGIN;
				bbmax[i] += OMARGIN;
			}
			for (i = 0; i < 3; i++)
				if (bbmax[i] - bbmin[i] > thescene.cusize)
					thescene.cusize = bbmax[i] - bbmin[i];
			for (i = 0; i < 3; i++)
				thescene.cuorg[i] =
					(bbmax[i]+bbmin[i]-thescene.cusize)*.5;
		}
	} else {
		for (i = 0; i < 3; i++)
			if (bbmin[i] < thescene.cuorg[i] ||
				bbmax[i] > thescene.cuorg[i] + thescene.cusize)
				error(USER, "boundary does not encompass scene");
	}

	mincusize = thescene.cusize / resolu - FTINY;

	for (i = startobj; i < nobjects; i++)		/* add new objects */
		addobject(&thescene, i);

	thescene.cutree = combine(thescene.cutree);	/* optimize */

	writeoct(outflags, &thescene, ofname);	/* write structures to stdout */

	quit(0);
	return 0; /* pro forma return */
}
Beispiel #11
0
int
main(
	int  argc,
	char  **argv
)
{
	double  d, expval = 1.0;
	int  i;

	progname = argv[0];
	mybright = &rgb_bright; /* default */

	for (i = 1; i < argc; i++)
		if (argv[i][0] == '-' || argv[i][0] == '+')
			switch (argv[i][1]) {
			case 'h':		/* header */
				header = argv[i][0] == '+';
				break;
			case 'H':		/* resolution string */
				resolution = argv[i][0] == '+';
				break;
			case 's':		/* skip bytes in header */
				skipbytes = atol(argv[++i]);
				break;
			case 'u':		/* unique values */
				uniq = argv[i][0] == '-';
				break;
			case 'o':		/* original values */
				original = argv[i][0] == '-';
				break;
			case 'g':		/* gamma correction */
				gamcor = atof(argv[i+1]);
				if (argv[i][0] == '+')
					gamcor = 1.0/gamcor;
				i++;
				break;
			case 'e':		/* exposure correction */
				d = atof(argv[i+1]);
				if (argv[i+1][0] == '-' || argv[i+1][0] == '+')
					d = pow(2.0, d);
				if (argv[i][0] == '-')
					expval *= d;
				scalecolor(exposure, d);
				doexposure++;
				i++;
				break;
			case 'R':		/* reverse byte sequence */
				if (argv[i][0] == '-') {
					ord[0]=BLU; ord[1]=GRN; ord[2]=RED;
				} else {
					ord[0]=RED; ord[1]=GRN; ord[2]=BLU;
				}
				break;
			case 'r':		/* reverse conversion */
				reverse = argv[i][0] == '-';
				break;
			case 'n':		/* non-interleaved RGB */
				interleave = argv[i][0] == '+';
				break;
			case 'b':		/* brightness values */
				putprim = argv[i][0] == '-' ? BRIGHT : ALL;
				break;
			case 'p':		/* primary controls */
				switch (argv[i][2]) {
				/* these two options affect -r conversion */
				case '\0':
					myprims[RED][CIEX] = atof(argv[++i]);
					myprims[RED][CIEY] = atof(argv[++i]);
					myprims[GRN][CIEX] = atof(argv[++i]);
					myprims[GRN][CIEY] = atof(argv[++i]);
					myprims[BLU][CIEX] = atof(argv[++i]);
					myprims[BLU][CIEY] = atof(argv[++i]);
					myprims[WHT][CIEX] = atof(argv[++i]);
					myprims[WHT][CIEY] = atof(argv[++i]);
					outprims = myprims;
					break;
				case 'x': case 'X': outprims = NULL; break;
				/* the following options affect +r only */
				case 'r': case 'R': putprim = RED; break;
				case 'g': case 'G': putprim = GRN; break;
				case 'b': case 'B': putprim = BLU; break;
				default: goto unkopt;
				}
				break;
			case 'd':		/* data only (no indices) */
				dataonly = argv[i][0] == '-';
				switch (argv[i][2]) {
				case '\0':
				case 'a':		/* ascii */
					format = 'a';
					fmtid = "ascii";
					break;
				case 'i':		/* integer */
					format = 'i';
					fmtid = "ascii";
					break;
				case 'b':		/* byte */
					dataonly = 1;
					format = 'b';
					fmtid = "byte";
					break;
				case 'W':		/* 16-bit swapped */
					swapbytes = 1;
				case 'w':		/* 16-bit */
					dataonly = 1;
					format = 'w';
					fmtid = "16-bit";
					break;
				case 'F':		/* swapped floats */
					swapbytes = 1;
				case 'f':		/* float */
					dataonly = 1;
					format = 'f';
					fmtid = "float";
					break;
				case 'D':		/* swapped doubles */
					swapbytes = 1;
				case 'd':		/* double */
					dataonly = 1;
					format = 'd';
					fmtid = "double";
					break;
				default:
					goto unkopt;
				}
				break;
			case 'x':		/* x resolution */
			case 'X':		/* x resolution */
				resolution = 0;
				if (argv[i][0] == '-')
					picres.rt |= XDECR;
				picres.xr = atoi(argv[++i]);
				break;
			case 'y':		/* y resolution */
			case 'Y':		/* y resolution */
				resolution = 0;
				if (argv[i][0] == '-')
					picres.rt |= YDECR;
				if (picres.xr == 0)
					picres.rt |= YMAJOR;
				picres.yr = atoi(argv[++i]);
				break;
			default:
unkopt:
				fprintf(stderr, "%s: unknown option: %s\n",
						progname, argv[i]);
				quit(1);
				break;
			}
		else
			break;
					/* recognize special formats */
	if (dataonly && format == 'b') {
		if (putprim == ALL)
			fmtid = "24-bit_rgb";
		else
			fmtid = "8-bit_grey";
	}
	if (dataonly && format == 'w') {
		if (putprim == ALL)
			fmtid = "48-bit_rgb";
		else
			fmtid = "16-bit_grey";
	}
					/* assign reverse ordering */
	rord[ord[0]] = 0;
	rord[ord[1]] = 1;
	rord[ord[2]] = 2;
					/* get input */
	if (i == argc) {
		fin = stdin;
	} else if (i < argc) {
		if ((fin = fopen(argv[i], "r")) == NULL) {
			fprintf(stderr, "%s: can't open file \"%s\"\n",
						progname, argv[i]);
			quit(1);
		}
		if (reverse && putprim != BRIGHT && i == argc-3) {
			if ((fin2 = fopen(argv[i+1], "r")) == NULL) {
				fprintf(stderr, "%s: can't open file \"%s\"\n",
						progname, argv[i+1]);
				quit(1);
			}
			if ((fin3 = fopen(argv[i+2], "r")) == NULL) {
				fprintf(stderr, "%s: can't open file \"%s\"\n",
						progname, argv[i+2]);
				quit(1);
			}
			interleave = -1;
		} else if (i != argc-1)
			fin = NULL;
		if (reverse && putprim != BRIGHT && !interleave) {
			fin2 = fopen(argv[i], "r");
			fin3 = fopen(argv[i], "r");
		}
		if (skipbytes && (fseek(fin, skipbytes, 0) || (fin2 != NULL &&
				(fseek(fin2, skipbytes, 0) ||
				fseek(fin3, skipbytes, 0))))) {
			fprintf(stderr, "%s: cannot skip %ld bytes on input\n",
					progname, skipbytes);
			quit(1);
		}
	}
	if (fin == NULL) {
		fprintf(stderr, "%s: bad # file arguments\n", progname);
		quit(1);
	}

	if (reverse) {
#ifdef _WIN32
		SET_FILE_BINARY(stdout);
		if (format != 'a' && format != 'i')
			SET_FILE_BINARY(fin);
#endif
					/* get header */
		if (header) {
			if (checkheader(fin, fmtid, stdout) < 0) {
				fprintf(stderr, "%s: wrong input format\n",
						progname);
				quit(1);
			}
			if (fin2 != NULL) {
				getheader(fin2, NULL, NULL);
				getheader(fin3, NULL, NULL);
			}
		} else
			newheader("RADIANCE", stdout);
					/* get resolution */
		if ((resolution && !fgetsresolu(&picres, fin)) ||
				picres.xr <= 0 || picres.yr <= 0) {
			fprintf(stderr, "%s: missing resolution\n", progname);
			quit(1);
		}
		if (resolution && fin2 != NULL) {
			RESOLU  pres2;
			if (!fgetsresolu(&pres2, fin2) ||
					pres2.rt != picres.rt ||
					pres2.xr != picres.xr ||
					pres2.yr != picres.yr ||
					!fgetsresolu(&pres2, fin3) ||
					pres2.rt != picres.rt ||
					pres2.xr != picres.xr ||
					pres2.yr != picres.yr) {
				fprintf(stderr, "%s: resolution mismatch\n",
						progname);
				quit(1);
			}
		}
						/* add to header */
		printargs(i, argv, stdout);
		if (expval < .99 || expval > 1.01)
			fputexpos(expval, stdout);
		if (outprims != NULL) {
			if (outprims != stdprims)
				fputprims(outprims, stdout);
			fputformat(COLRFMT, stdout);
		} else				/* XYZ data */
			fputformat(CIEFMT, stdout);
		putchar('\n');
		fputsresolu(&picres, stdout);	/* always put resolution */
		valtopix();
	} else {
#ifdef _WIN32
		SET_FILE_BINARY(fin);
		if (format != 'a' && format != 'i')
			SET_FILE_BINARY(stdout);
#endif
						/* get header */
		getheader(fin, checkhead, NULL);
		if (wrongformat) {
			fprintf(stderr,
				"%s: input not a Radiance RGBE picture\n",
					progname);
			quit(1);
		}
		if (!fgetsresolu(&picres, fin)) {
			fprintf(stderr, "%s: missing resolution\n", progname);
			quit(1);
		}
		if (header) {
			printargs(i, argv, stdout);
			if (expval < .99 || expval > 1.01)
				fputexpos(expval, stdout);
			fputformat(fmtid, stdout);
			putchar('\n');
		}
		if (resolution)			/* put resolution */
			fputsresolu(&picres, stdout);
		pixtoval();
	}

	quit(0);
	return 0; /* pro forma return */
}
static void
clrdebug(void)			/* put out debug picture from color input */
{
	static COLR	blkclr = BLKCOLR;
	COLR	mbclr[24], cvclr[24], orclr[24];
	COLR	*scan;
	COLOR	ctmp, ct2;
	int	y, i;
	register int	x, rg;
						/* convert colors */
	for (i = 0; i < 24; i++) {
		copycolor(ctmp, mbRGB[i]);
		clipgamut(ctmp, bright(ctmp), CGAMUT, cblack, cwhite);
		setcolr(mbclr[i], colval(ctmp,RED),
				colval(ctmp,GRN), colval(ctmp,BLU));
		if (inpflags & 1L<<i) {
			copycolor(ctmp, inpRGB[i]);
			clipgamut(ctmp, bright(ctmp), CGAMUT, cblack, cwhite);
			setcolr(orclr[i], colval(ctmp,RED),
					colval(ctmp,GRN), colval(ctmp,BLU));
			if (rawmap)
				copycolr(cvclr[i], mbclr[i]);
			else {
				bresp(ctmp, inpRGB[i]);
				colortrans(ct2, solmat, ctmp);
				clipgamut(ct2, bright(ct2), CGAMUT,
						cblack, cwhite);
				setcolr(cvclr[i], colval(ct2,RED),
						colval(ct2,GRN),
						colval(ct2,BLU));
			}
		}
	}
						/* allocate scanline */
	scan = (COLR *)malloc(xmax*sizeof(COLR));
	if (scan == NULL) {
		perror(progname);
		exit(1);
	}
						/* finish debug header */
	fputformat(COLRFMT, debugfp);
	putc('\n', debugfp);
	fprtresolu(xmax, ymax, debugfp);
						/* write debug picture */
	for (y = ymax-1; y >= 0; y--) {
		for (x = 0; x < xmax; x++) {
			rg = chartndx(x, y, &i);
			if (rg == RG_CENT) {
				if (!(1L<<i & gmtflags) || (x+y)&07)
					copycolr(scan[x], mbclr[i]);
				else
					copycolr(scan[x], blkclr);
			} else if (rg == RG_BORD || !(1L<<i & inpflags))
				copycolr(scan[x], blkclr);
			else if (rg == RG_ORIG)
				copycolr(scan[x], orclr[i]);
			else /* rg == RG_CORR */
				copycolr(scan[x], cvclr[i]);
		}
		if (fwritecolrs(scan, xmax, debugfp) < 0) {
			fprintf(stderr, "%s: error writing debugging picture\n",
					progname);
			exit(1);
		}
	}
						/* clean up */
	fclose(debugfp);
	free((void *)scan);
}
int
main(
	int	argc,
	char	*argv[]
)
{
	static char	picfmt[MAXFMTLEN] = PICFMT;
	int	rval;
	FILE	*fin;

	SET_DEFAULT_BINARY();
	SET_FILE_BINARY(stdout);

	progname = argv[0];

	while (argc > 2 && argv[1][0] == '-') {
		switch (argv[1][1]) {
		case 'c':
			correctorder = 1;
			break;
		case 'r':
			ccw = 1;
			break;
		default:
			goto userr;
		}
		argc--; argv++;
	}
	if (argc != 2 && argc != 3)
		goto userr;
	if ((fin = fopen(argv[1], "r")) == NULL) {
		fprintf(stderr, "%s: cannot open\n", argv[1]);
		exit(1);
	}
	if (argc == 3 && freopen(argv[2], "w", stdout) == NULL) {
		fprintf(stderr, "%s: cannot open\n", argv[2]);
		exit(1);
	}
					/* transfer header */
	if ((rval = checkheader(fin, picfmt, stdout)) < 0) {
		fprintf(stderr, "%s: not a Radiance picture\n", progname);
		exit(1);
	}
	if (rval)
		fputformat(picfmt, stdout);
					/* add new header info. */
	fputs(progname, stdout);
	if (ccw) fputs(" -r", stdout);
	if (correctorder) fputs(" -c", stdout);
	fputs("\n\n", stdout);
					/* get picture size */
	if ((order = fgetresolu(&xres, &yres, fin)) < 0) {
		fprintf(stderr, "%s: bad picture size\n", progname);
		exit(1);
	}
					/* write new picture size */
	fputresolu(neworder(), yres, xres, stdout);
					/* compute buffer capacity */
	nrows = sizeof(buf)/sizeof(COLR)/yres;
	if (ccw)			/* rotate the image */
		rotateccw(fin);
	else
		rotatecw(fin);
	exit(0);
userr:
	fprintf(stderr, "Usage: %s [-r][-c] infile [outfile]\n", progname);
	exit(1);
}
Beispiel #14
0
int
main(
	int  argc,
	char  *argv[]
)
{
	struct hdStruct	 head;
	int  dither = 1;
	int  reverse = 0;
	int  ncolors = 256;
	int  greyscale = 0;
	int  i;
	SET_DEFAULT_BINARY();
	SET_FILE_BINARY(stdin);
	SET_FILE_BINARY(stdout);
	progname = argv[0];
	samplefac = 0;

	for (i = 1; i < argc; i++)
		if (argv[i][0] == '-')
			switch (argv[i][1]) {
			case 'd':
				dither = !dither;
				break;
			case 'g':
				gamv = atof(argv[++i]);
				break;
			case 'r':
				reverse = !reverse;
				break;
			case 'b':
				greyscale = 1;
				break;
			case 'e':
				if (argv[i+1][0] != '+' && argv[i+1][0] != '-')
					goto userr;
				bradj = atoi(argv[++i]);
				break;
			case 'c':
				ncolors = atoi(argv[++i]);
				break;
			case 'n':
				samplefac = atoi(argv[++i]);
				break;
			default:
				goto userr;
			}
		else
			break;

	if (i < argc-2)
		goto userr;
	if (i <= argc-1 && freopen(argv[i], "r", stdin) == NULL) {
		sprintf(errmsg, "cannot open input \"%s\"", argv[i]);
		quiterr(errmsg);
	}
	if (i == argc-2 && freopen(argv[i+1], "w", stdout) == NULL) {
		sprintf(errmsg, "cannot open output \"%s\"", argv[i+1]);
		quiterr(errmsg);
	}
	if (reverse) {
					/* get header */
		if (getthead(&head, NULL, stdin) < 0)
			quiterr("bad targa file");
		if (!goodpic(&head))
			quiterr("incompatible format");
		xmax = head.x;
		ymax = head.y;
					/* put header */
		newheader("RADIANCE", stdout);
		printargs(i, argv, stdout);
		fputformat(COLRFMT, stdout);
		putchar('\n');
		fprtresolu(xmax, ymax, stdout);
					/* convert file */
		tg2ra(&head);
	} else {
		if (getrhead(&head, stdin) < 0)
			quiterr("bad Radiance input");
					/* write header */
		putthead(&head, NULL, stdout);
					/* convert file */
		if (greyscale)
			getgrey(ncolors);
		else
			getmapped(ncolors, dither);
					/* write data */
		writetarga(&head, tarData, stdout);
	}
	quiterr(NULL);
userr:
	fprintf(stderr,
	"Usage: %s [-d][-n samp][-c ncolors][-b][-g gamv][-e +/-stops] input [output]\n",
			progname);
	fprintf(stderr, "   Or: %s -r [-g gamv][-e +/-stops] [input [output]]\n",
			progname);
	exit(1);
}
Beispiel #15
0
int
main(
	int  argc,
	char  *argv[]
)
{
	char  inpbuf[2];
	int  gryflag = 0;
	int  binflag = 1;
	int  reverse = 0;
	int  ptype;
	int  i;
	
	progname = argv[0];

	for (i = 1; i < argc; i++)
		if (argv[i][0] == '-')
			switch (argv[i][1]) {
			case 's':
				maxval = atoi(argv[++i]) & 0xffff;
				break;
			case 'b':
				gryflag = 1;
				break;
			case 'g':
				gamcor = atof(argv[++i]);
				break;
			case 'e':
				if (argv[i+1][0] != '+' && argv[i+1][0] != '-')
					goto userr;
				bradj = atoi(argv[++i]);
				break;
			case 'a':
				binflag = 0;
				break;
			case 'r':
				reverse = !reverse;
				break;
			default:
				goto userr;
			}
		else
			break;

	if (i < argc-2)
		goto userr;
	if (i <= argc-1 && freopen(argv[i], "r", stdin) == NULL) {
		fprintf(stderr, "%s: can't open input \"%s\"\n",
				progname, argv[i]);
		exit(1);
	}
	if (i == argc-2 && freopen(argv[i+1], "w", stdout) == NULL) {
		fprintf(stderr, "%s: can't open output \"%s\"\n",
				progname, argv[i+1]);
		exit(1);
	}
	if (maxval < 256)
		setcolrgam(gamcor);
	if (reverse) {
					/* get header */
		if (read(fileno(stdin), inpbuf, 2) != 2 || inpbuf[0] != 'P')
			quiterr("input not a Poskanzer Pixmap");
		ptype = inpbuf[1];
#ifdef _WIN32
		if (ptype > 4)
			SET_FILE_BINARY(stdin);
		SET_FILE_BINARY(stdout);
#endif
		xmax = scanint(stdin);
		ymax = scanint(stdin);
		maxval = scanint(stdin);
					/* put header */
		newheader("RADIANCE", stdout);
		printargs(i, argv, stdout);
		fputformat(COLRFMT, stdout);
		putchar('\n');
		fprtresolu(xmax, ymax, stdout);
					/* convert file */
		if (maxval >= 256)
			switch (ptype) {
			case '2':
				ppm2ra2(agryscan2);
				break;
			case '5':
				ppm2ra2(bgryscan2);
				break;
			case '3':
				ppm2ra2(aclrscan2);
				break;
			case '6':
				ppm2ra2(bclrscan2);
				break;
			default:
				quiterr("unsupported Pixmap type");
			}
		else
			switch (ptype) {
			case '2':
				ppm2ra(agryscan);
				break;
			case '5':
				ppm2ra(bgryscan);
				break;
			case '3':
				ppm2ra(aclrscan);
				break;
			case '6':
				ppm2ra(bclrscan);
				break;
			default:
				quiterr("unsupported Pixmap type");
			}
	} else {
#ifdef _WIN32
		SET_FILE_BINARY(stdin);
		if (binflag)
			SET_FILE_BINARY(stdout);
#endif
					/* get header info. */
		if (checkheader(stdin, COLRFMT, NULL) < 0 ||
				fgetresolu(&xmax, &ymax, stdin) < 0)
			quiterr("bad picture format");
					/* write PPM header */
		printf("P%1d\n%d %d\n%u\n", (gryflag?2:3)+(binflag?3:0),
				xmax, ymax, maxval);
					/* convert file */
		if (maxval >= 256)
			ra2ppm2(binflag, gryflag);
		else
			ra2ppm(binflag, gryflag);
	}
	exit(0);
userr:
	fprintf(stderr,
		"Usage: %s [-r][-a][-b][-s maxv][-g gamma][-e +/-stops] [input [output]]\n",
			progname);
	exit(1);
}
Beispiel #16
0
int
main(
	int	argc,
	char	*argv[]
)
{
	int	original;
	double	f;
	int	a;
	SET_DEFAULT_BINARY();
	SET_FILE_BINARY(stdin);
	SET_FILE_BINARY(stdout);
	progname = argv[0];
						/* scan options */
	for (a = 1; a < argc; a++) {
		if (argv[a][0] == '-')
			switch (argv[a][1]) {
			case 'x':
			case 'y':
				a++;
				continue;
			case 'w':
				nowarn = !nowarn;
				continue;
			case 'h':
				echoheader = !echoheader;
				continue;
			case 'f':
			case 'e':
				a++;
				continue;
			}
		break;
	}
	newheader("RADIANCE", stdout);	/* start header */
	fputnow(stdout);
					/* process files */
	for (nfiles = 0; nfiles < MAXINP; nfiles++) {
		setcolor(input[nfiles].coef, 1.0, 1.0, 1.0);
		setcolor(input[nfiles].expos, 1.0, 1.0, 1.0);
		input[nfiles].vw = stdview;
		input[nfiles].pa = 1.0;
	}
	nfiles = 0;
	original = 0;
	for ( ; a < argc; a++) {
		if (nfiles >= MAXINP) {
			eputs(argv[0]);
			eputs(": too many picture files\n");
			quit(1);
		}
		if (argv[a][0] == '-')
			switch (argv[a][1]) {
			case '\0':
				input[nfiles].name = StandardInput;
				input[nfiles].fp = stdin;
				break;
			case 'o':
				original++;
				continue;
			case 's':
				f = atof(argv[++a]);
				scalecolor(input[nfiles].coef, f);
				continue;
			case 'c':
				colval(input[nfiles].coef,RED)*=atof(argv[++a]);
				colval(input[nfiles].coef,GRN)*=atof(argv[++a]);
				colval(input[nfiles].coef,BLU)*=atof(argv[++a]);
				continue;
			default:
				goto usage;
			}
		else {
			if (argv[a][0] == '!') {
				input[nfiles].name = Command;
				input[nfiles].fp = popen(argv[a]+1, "r");
			} else {
				input[nfiles].name = argv[a];
				input[nfiles].fp = fopen(argv[a], "r");
			}
			if (input[nfiles].fp == NULL) {
				perror(argv[a]);
				quit(1);
			}
		}
		checkfile();
		if (original) {
			colval(input[nfiles].coef,RED) /=
					colval(input[nfiles].expos,RED);
			colval(input[nfiles].coef,GRN) /=
					colval(input[nfiles].expos,GRN);
			colval(input[nfiles].coef,BLU) /=
					colval(input[nfiles].expos,BLU);
			setcolor(input[nfiles].expos, 1.0, 1.0, 1.0);
		}
		nfiles++;
		original = 0;
	}
	init();				/* set constants */
					/* go back and get expressions */
	for (a = 1; a < argc; a++) {
		if (argv[a][0] == '-')
			switch (argv[a][1]) {
			case 'x':
				varset(vxres, ':', eval(argv[++a]));
				continue;
			case 'y':
				varset(vyres, ':', eval(argv[++a]));
				continue;
			case 'w':
				continue;
			case 'h':
				continue;
			case 'f':
				fcompile(argv[++a]);
				continue;
			case 'e':
				scompile(argv[++a], NULL, 0);
				continue;
			}
		break;
	}
						/* set/get output resolution */
	if (!vardefined(vxres))
		varset(vxres, ':', (double)xmax);
	if (!vardefined(vyres))
		varset(vyres, ':', (double)ymax);
	xres = varvalue(vxres) + .5;
	yres = varvalue(vyres) + .5;
	if (xres <= 0 || yres <= 0) {
		eputs(argv[0]);
		eputs(": illegal output resolution\n");
		quit(1);
	}
						/* complete header */
	printargs(argc, argv, stdout);
	if (strcmp(ourfmt, PICFMT))
		fputformat(ourfmt, stdout);	/* print format if known */
	putchar('\n');
	fprtresolu(xres, yres, stdout);
						/* combine pictures */
	combine();
	quit(0);
usage:
	eputs("Usage: ");
	eputs(argv[0]);
	eputs(
" [-w][-h][-x xr][-y yr][-e expr][-f file] [ [-o][-s f][-c r g b] hdr ..]\n");
	quit(1);
	return 1; /* pro forma return */
}