static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct drv_context *drvc;
struct dev_context *devc;
struct sr_dev_inst *sdi;
struct sr_usb_dev_inst *usb;
struct sr_channel *ch;
struct sr_channel_group *cg;
struct sr_config *src;
const struct fx2lafw_profile *prof;
GSList *l, *devices, *conn_devices;
gboolean has_firmware;
struct libusb_device_descriptor des;
libusb_device **devlist;
struct libusb_device_handle *hdl;
int ret, i, j;
int num_logic_channels = 0, num_analog_channels = 0;
const char *conn;
char manufacturer[64], product[64], serial_num[64], connection_id[64];
char channel_name[16];
drvc = di->context;
conn = NULL;
for (l = options; l; l = l->next) {
src = l->data;
switch (src->key) {
case SR_CONF_CONN:
conn = g_variant_get_string(src->data, NULL);
break;
}
}
if (conn)
conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn);
else
conn_devices = NULL;
/* Find all fx2lafw compatible devices and upload firmware to them. */
devices = NULL;
libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
for (i = 0; devlist[i]; i++) {
if (conn) {
usb = NULL;
for (l = conn_devices; l; l = l->next) {
usb = l->data;
if (usb->bus == libusb_get_bus_number(devlist[i])
&& usb->address == libusb_get_device_address(devlist[i]))
break;
}
if (!l)
/* This device matched none of the ones that
* matched the conn specification. */
continue;
}
libusb_get_device_descriptor( devlist[i], &des);
if (!is_plausible(&des))
continue;
if ((ret = libusb_open(devlist[i], &hdl)) < 0) {
sr_warn("Failed to open potential device with "
"VID:PID %04x:%04x: %s.", des.idVendor,
des.idProduct, libusb_error_name(ret));
continue;
}
if (des.iManufacturer == 0) {
manufacturer[0] = '\0';
} else if ((ret = libusb_get_string_descriptor_ascii(hdl,
des.iManufacturer, (unsigned char *) manufacturer,
sizeof(manufacturer))) < 0) {
sr_warn("Failed to get manufacturer string descriptor: %s.",
libusb_error_name(ret));
continue;
}
if (des.iProduct == 0) {
product[0] = '\0';
} else if ((ret = libusb_get_string_descriptor_ascii(hdl,
des.iProduct, (unsigned char *) product,
sizeof(product))) < 0) {
sr_warn("Failed to get product string descriptor: %s.",
libusb_error_name(ret));
continue;
}
if (des.iSerialNumber == 0) {
serial_num[0] = '\0';
} else if ((ret = libusb_get_string_descriptor_ascii(hdl,
des.iSerialNumber, (unsigned char *) serial_num,
sizeof(serial_num))) < 0) {
sr_warn("Failed to get serial number string descriptor: %s.",
libusb_error_name(ret));
continue;
}
libusb_close(hdl);
if (usb_get_port_path(devlist[i], connection_id, sizeof(connection_id)) < 0)
continue;
prof = NULL;
for (j = 0; supported_fx2[j].vid; j++) {
if (des.idVendor == supported_fx2[j].vid &&
des.idProduct == supported_fx2[j].pid &&
(!supported_fx2[j].usb_manufacturer ||
!strcmp(manufacturer, supported_fx2[j].usb_manufacturer)) &&
(!supported_fx2[j].usb_product ||
!strcmp(product, supported_fx2[j].usb_product))) {
prof = &supported_fx2[j];
break;
}
}
if (!prof)
continue;
sdi = g_malloc0(sizeof(struct sr_dev_inst));
sdi->status = SR_ST_INITIALIZING;
sdi->vendor = g_strdup(prof->vendor);
sdi->model = g_strdup(prof->model);
sdi->version = g_strdup(prof->model_version);
sdi->serial_num = g_strdup(serial_num);
sdi->connection_id = g_strdup(connection_id);
/* Fill in channellist according to this device's profile. */
num_logic_channels = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8;
num_analog_channels = prof->dev_caps & DEV_CAPS_AX_ANALOG ? 1 : 0;
/* Logic channels, all in one channel group. */
cg = g_malloc0(sizeof(struct sr_channel_group));
cg->name = g_strdup("Logic");
for (j = 0; j < num_logic_channels; j++) {
sprintf(channel_name, "D%d", j);
ch = sr_channel_new(sdi, j, SR_CHANNEL_LOGIC,
TRUE, channel_name);
cg->channels = g_slist_append(cg->channels, ch);
}
sdi->channel_groups = g_slist_append(NULL, cg);
for (j = 0; j < num_analog_channels; j++) {
snprintf(channel_name, 16, "A%d", j);
ch = sr_channel_new(sdi, j + num_logic_channels,
SR_CHANNEL_ANALOG, TRUE, channel_name);
/* Every analog channel gets its own channel group. */
cg = g_malloc0(sizeof(struct sr_channel_group));
cg->name = g_strdup(channel_name);
cg->channels = g_slist_append(NULL, ch);
sdi->channel_groups = g_slist_append(sdi->channel_groups, cg);
}
devc = fx2lafw_dev_new();
devc->profile = prof;
sdi->priv = devc;
devices = g_slist_append(devices, sdi);
devc->samplerates = samplerates;
devc->num_samplerates = ARRAY_SIZE(samplerates);
has_firmware = usb_match_manuf_prod(devlist[i],
"sigrok", "fx2lafw");
if (has_firmware) {
/* Already has the firmware, so fix the new address. */
sr_dbg("Found an fx2lafw device.");
sdi->status = SR_ST_INACTIVE;
sdi->inst_type = SR_INST_USB;
sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
libusb_get_device_address(devlist[i]), NULL);
} else {
if (ezusb_upload_firmware(drvc->sr_ctx, devlist[i],
USB_CONFIGURATION, prof->firmware) == SR_OK) {
/* Store when this device's FW was updated. */
devc->fw_updated = g_get_monotonic_time();
} else {
sr_err("Firmware upload failed for "
"device %d.%d (logical), name %s.",
libusb_get_bus_number(devlist[i]),
libusb_get_device_address(devlist[i]),
prof->firmware);
}
sdi->inst_type = SR_INST_USB;
sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
0xff, NULL);
}
}
libusb_free_device_list(devlist, 1);
g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free);
return std_scan_complete(di, devices);
}
static GSList *scan(GSList *options)
{
struct drv_context *drvc;
struct dev_context *devc;
struct sr_dev_inst *sdi;
struct sr_usb_dev_inst *usb;
struct sr_channel *ch;
struct sr_config *src;
const struct fx2lafw_profile *prof;
GSList *l, *devices, *conn_devices;
struct libusb_device_descriptor des;
libusb_device **devlist;
struct libusb_device_handle *hdl;
int devcnt, num_logic_channels, ret, i, j;
const char *conn;
char manufacturer[64], product[64];
drvc = di->priv;
conn = NULL;
for (l = options; l; l = l->next) {
src = l->data;
switch (src->key) {
case SR_CONF_CONN:
conn = g_variant_get_string(src->data, NULL);
break;
}
}
if (conn)
conn_devices = sr_usb_find(drvc->sr_ctx->libusb_ctx, conn);
else
conn_devices = NULL;
/* Find all fx2lafw compatible devices and upload firmware to them. */
devices = NULL;
libusb_get_device_list(drvc->sr_ctx->libusb_ctx, &devlist);
for (i = 0; devlist[i]; i++) {
if (conn) {
usb = NULL;
for (l = conn_devices; l; l = l->next) {
usb = l->data;
if (usb->bus == libusb_get_bus_number(devlist[i])
&& usb->address == libusb_get_device_address(devlist[i]))
break;
}
if (!l)
/* This device matched none of the ones that
* matched the conn specification. */
continue;
}
if ((ret = libusb_get_device_descriptor( devlist[i], &des)) != 0) {
sr_warn("Failed to get device descriptor: %s.",
libusb_error_name(ret));
continue;
}
if ((ret = libusb_open(devlist[i], &hdl)) < 0)
continue;
if (des.iManufacturer == 0) {
manufacturer[0] = '\0';
} else if ((ret = libusb_get_string_descriptor_ascii(hdl,
des.iManufacturer, (unsigned char *) manufacturer,
sizeof(manufacturer))) < 0) {
sr_warn("Failed to get manufacturer string descriptor: %s.",
libusb_error_name(ret));
continue;
}
if (des.iProduct == 0) {
product[0] = '\0';
} else if ((ret = libusb_get_string_descriptor_ascii(hdl,
des.iProduct, (unsigned char *) product,
sizeof(product))) < 0) {
sr_warn("Failed to get product string descriptor: %s.",
libusb_error_name(ret));
continue;
}
libusb_close(hdl);
prof = NULL;
for (j = 0; supported_fx2[j].vid; j++) {
if (des.idVendor == supported_fx2[j].vid &&
des.idProduct == supported_fx2[j].pid &&
(!supported_fx2[j].usb_manufacturer ||
!strcmp(manufacturer, supported_fx2[j].usb_manufacturer)) &&
(!supported_fx2[j].usb_manufacturer ||
!strcmp(product, supported_fx2[j].usb_product))) {
prof = &supported_fx2[j];
break;
}
}
/* Skip if the device was not found. */
if (!prof)
continue;
devcnt = g_slist_length(drvc->instances);
sdi = sr_dev_inst_new(devcnt, SR_ST_INITIALIZING,
prof->vendor, prof->model, prof->model_version);
if (!sdi)
return NULL;
sdi->driver = di;
/* Fill in channellist according to this device's profile. */
num_logic_channels = prof->dev_caps & DEV_CAPS_16BIT ? 16 : 8;
for (j = 0; j < num_logic_channels; j++) {
if (!(ch = sr_channel_new(j, SR_CHANNEL_LOGIC, TRUE,
channel_names[j])))
return NULL;
sdi->channels = g_slist_append(sdi->channels, ch);
}
devc = fx2lafw_dev_new();
devc->profile = prof;
sdi->priv = devc;
drvc->instances = g_slist_append(drvc->instances, sdi);
devices = g_slist_append(devices, sdi);
if (fx2lafw_check_conf_profile(devlist[i])) {
/* Already has the firmware, so fix the new address. */
sr_dbg("Found an fx2lafw device.");
sdi->status = SR_ST_INACTIVE;
sdi->inst_type = SR_INST_USB;
sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
libusb_get_device_address(devlist[i]), NULL);
} else {
if (ezusb_upload_firmware(devlist[i], USB_CONFIGURATION,
prof->firmware) == SR_OK)
/* Store when this device's FW was updated. */
devc->fw_updated = g_get_monotonic_time();
else
sr_err("Firmware upload failed for "
"device %d.", devcnt);
sdi->inst_type = SR_INST_USB;
sdi->conn = sr_usb_dev_inst_new(libusb_get_bus_number(devlist[i]),
0xff, NULL);
}
}
libusb_free_device_list(devlist, 1);
g_slist_free_full(conn_devices, (GDestroyNotify)sr_usb_dev_inst_free);
return devices;
}