/*
* parseInput: if appropriate, parse input data from backend
* until input is exhausted or a stopping state is reached.
* Note that this function will NOT attempt to read more data from the backend.
*/
void
pqParseInput2(PGconn *conn)
{
char id;
/*
* Loop to parse successive complete messages available in the buffer.
*/
for (;;)
{
/*
* Quit if in COPY_OUT state: we expect raw data from the server until
* PQendcopy is called. Don't try to parse it according to the normal
* protocol. (This is bogus. The data lines ought to be part of the
* protocol and have identifying leading characters.)
*/
if (conn->asyncStatus == PGASYNC_COPY_OUT)
return;
/*
* OK to try to read a message type code.
*/
conn->inCursor = conn->inStart;
if (pqGetc(&id, conn))
return;
/*
* NOTIFY and NOTICE messages can happen in any state besides COPY
* OUT; always process them right away.
*
* Most other messages should only be processed while in BUSY state.
* (In particular, in READY state we hold off further parsing until
* the application collects the current PGresult.)
*
* However, if the state is IDLE then we got trouble; we need to deal
* with the unexpected message somehow.
*/
if (id == 'A')
{
if (getNotify(conn))
return;
}
else if (id == 'N')
{
if (pqGetErrorNotice2(conn, false))
return;
}
else if (conn->asyncStatus != PGASYNC_BUSY)
{
/* If not IDLE state, just wait ... */
if (conn->asyncStatus != PGASYNC_IDLE)
return;
/*
* Unexpected message in IDLE state; need to recover somehow.
* ERROR messages are displayed using the notice processor;
* anything else is just dropped on the floor after displaying a
* suitable warning notice. (An ERROR is very possibly the
* backend telling us why it is about to close the connection, so
* we don't want to just discard it...)
*/
if (id == 'E')
{
if (pqGetErrorNotice2(conn, false /* treat as notice */ ))
return;
}
else
{
pqInternalNotice(&conn->noticeHooks,
"message type 0x%02x arrived from server while idle",
id);
/* Discard the unexpected message; good idea?? */
conn->inStart = conn->inEnd;
break;
}
}
else
{
/*
* In BUSY state, we can process everything.
*/
switch (id)
{
case 'C': /* command complete */
if (pqGets(&conn->workBuffer, conn))
return;
if (conn->result == NULL)
{
conn->result = PQmakeEmptyPGresult(conn,
PGRES_COMMAND_OK);
if (!conn->result)
{
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("out of memory"));
pqSaveErrorResult(conn);
}
}
if (conn->result)
{
strlcpy(conn->result->cmdStatus, conn->workBuffer.data,
CMDSTATUS_LEN);
}
checkXactStatus(conn, conn->workBuffer.data);
conn->asyncStatus = PGASYNC_READY;
break;
case 'E': /* error return */
if (pqGetErrorNotice2(conn, true))
return;
conn->asyncStatus = PGASYNC_READY;
break;
case 'Z': /* backend is ready for new query */
conn->asyncStatus = PGASYNC_IDLE;
break;
case 'I': /* empty query */
/* read and throw away the closing '\0' */
if (pqGetc(&id, conn))
return;
if (id != '\0')
pqInternalNotice(&conn->noticeHooks,
"unexpected character %c following empty query response (\"I\" message)",
id);
if (conn->result == NULL)
{
conn->result = PQmakeEmptyPGresult(conn,
PGRES_EMPTY_QUERY);
if (!conn->result)
{
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("out of memory"));
pqSaveErrorResult(conn);
}
}
conn->asyncStatus = PGASYNC_READY;
break;
case 'K': /* secret key data from the backend */
/*
* This is expected only during backend startup, but it's
* just as easy to handle it as part of the main loop.
* Save the data and continue processing.
*/
if (pqGetInt(&(conn->be_pid), 4, conn))
return;
if (pqGetInt(&(conn->be_key), 4, conn))
return;
break;
case 'P': /* synchronous (normal) portal */
if (pqGets(&conn->workBuffer, conn))
return;
/* We pretty much ignore this message type... */
break;
case 'T': /* row descriptions (start of query results) */
if (conn->result == NULL)
{
/* First 'T' in a query sequence */
if (getRowDescriptions(conn))
return;
/* getRowDescriptions() moves inStart itself */
continue;
}
else
{
/*
* A new 'T' message is treated as the start of
* another PGresult. (It is not clear that this is
* really possible with the current backend.) We stop
* parsing until the application accepts the current
* result.
*/
conn->asyncStatus = PGASYNC_READY;
return;
}
break;
case 'D': /* ASCII data tuple */
if (conn->result != NULL)
{
/* Read another tuple of a normal query response */
if (getAnotherTuple(conn, FALSE))
return;
/* getAnotherTuple() moves inStart itself */
continue;
}
else
{
pqInternalNotice(&conn->noticeHooks,
"server sent data (\"D\" message) without prior row description (\"T\" message)");
/* Discard the unexpected message; good idea?? */
conn->inStart = conn->inEnd;
return;
}
break;
case 'B': /* Binary data tuple */
if (conn->result != NULL)
{
/* Read another tuple of a normal query response */
if (getAnotherTuple(conn, TRUE))
return;
/* getAnotherTuple() moves inStart itself */
continue;
}
else
{
pqInternalNotice(&conn->noticeHooks,
"server sent binary data (\"B\" message) without prior row description (\"T\" message)");
/* Discard the unexpected message; good idea?? */
conn->inStart = conn->inEnd;
return;
}
break;
case 'G': /* Start Copy In */
conn->asyncStatus = PGASYNC_COPY_IN;
break;
case 'H': /* Start Copy Out */
conn->asyncStatus = PGASYNC_COPY_OUT;
break;
/*
* Don't need to process CopyBothResponse here because it
* never arrives from the server during protocol 2.0.
*/
default:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext(
"unexpected response from server; first received character was \"%c\"\n"),
id);
/* build an error result holding the error message */
pqSaveErrorResult(conn);
/* Discard the unexpected message; good idea?? */
conn->inStart = conn->inEnd;
conn->asyncStatus = PGASYNC_READY;
return;
} /* switch on protocol character */
}
/* Successfully consumed this message */
conn->inStart = conn->inCursor;
}
}
/*
* parseInput: if appropriate, parse input data from backend
* until input is exhausted or a stopping state is reached.
* Note that this function will NOT attempt to read more data from the backend.
*/
void
pqParseInput3(PGconn *conn)
{
char id;
int msgLength;
int avail;
/*
* Loop to parse successive complete messages available in the buffer.
*/
for (;;)
{
/*
* Try to read a message. First get the type code and length. Return
* if not enough data.
*/
conn->inCursor = conn->inStart;
if (pqGetc(&id, conn))
return;
if (pqGetInt(&msgLength, 4, conn))
return;
/*
* Try to validate message type/length here. A length less than 4 is
* definitely broken. Large lengths should only be believed for a few
* message types.
*/
if (msgLength < 4)
{
handleSyncLoss(conn, id, msgLength);
return;
}
if (msgLength > 30000 && !VALID_LONG_MESSAGE_TYPE(id))
{
handleSyncLoss(conn, id, msgLength);
return;
}
/*
* Can't process if message body isn't all here yet.
*/
msgLength -= 4;
avail = conn->inEnd - conn->inCursor;
if (avail < msgLength)
{
/*
* Before returning, enlarge the input buffer if needed to hold
* the whole message. This is better than leaving it to
* pqReadData because we can avoid multiple cycles of realloc()
* when the message is large; also, we can implement a reasonable
* recovery strategy if we are unable to make the buffer big
* enough.
*/
if (pqCheckInBufferSpace(conn->inCursor + msgLength, conn))
{
/*
* XXX add some better recovery code... plan is to skip over
* the message using its length, then report an error. For the
* moment, just treat this like loss of sync (which indeed it
* might be!)
*/
handleSyncLoss(conn, id, msgLength);
}
return;
}
/*
* NOTIFY and NOTICE messages can happen in any state; always process
* them right away.
*
* Most other messages should only be processed while in BUSY state.
* (In particular, in READY state we hold off further parsing until
* the application collects the current PGresult.)
*
* However, if the state is IDLE then we got trouble; we need to deal
* with the unexpected message somehow.
*
* ParameterStatus ('S') messages are a special case: in IDLE state we
* must process 'em (this case could happen if a new value was adopted
* from config file due to SIGHUP), but otherwise we hold off until
* BUSY state.
*/
if (id == 'A')
{
if (getNotify(conn))
return;
}
else if (id == 'N')
{
if (pqGetErrorNotice3(conn, false))
return;
}
else if (conn->asyncStatus != PGASYNC_BUSY)
{
/* If not IDLE state, just wait ... */
if (conn->asyncStatus != PGASYNC_IDLE)
return;
/*
* Unexpected message in IDLE state; need to recover somehow.
* ERROR messages are displayed using the notice processor;
* ParameterStatus is handled normally; anything else is just
* dropped on the floor after displaying a suitable warning
* notice. (An ERROR is very possibly the backend telling us why
* it is about to close the connection, so we don't want to just
* discard it...)
*/
if (id == 'E')
{
if (pqGetErrorNotice3(conn, false /* treat as notice */ ))
return;
}
else if (id == 'S')
{
if (getParameterStatus(conn))
return;
}
else
{
pqInternalNotice(&conn->noticeHooks,
"message type 0x%02x arrived from server while idle",
id);
/* Discard the unexpected message */
conn->inCursor += msgLength;
}
}
else
{
/*
* In BUSY state, we can process everything.
*/
switch (id)
{
case 'C': /* command complete */
if (pqGets(&conn->workBuffer, conn))
return;
if (conn->result == NULL)
{
conn->result = PQmakeEmptyPGresult(conn,
PGRES_COMMAND_OK);
if (!conn->result)
return;
}
strncpy(conn->result->cmdStatus, conn->workBuffer.data,
CMDSTATUS_LEN);
conn->asyncStatus = PGASYNC_READY;
break;
case 'E': /* error return */
if (pqGetErrorNotice3(conn, true))
return;
conn->asyncStatus = PGASYNC_READY;
break;
case 'Z': /* backend is ready for new query */
if (getReadyForQuery(conn))
return;
conn->asyncStatus = PGASYNC_IDLE;
break;
case 'I': /* empty query */
if (conn->result == NULL)
{
conn->result = PQmakeEmptyPGresult(conn,
PGRES_EMPTY_QUERY);
if (!conn->result)
return;
}
conn->asyncStatus = PGASYNC_READY;
break;
case '1': /* Parse Complete */
/* If we're doing PQprepare, we're done; else ignore */
if (conn->queryclass == PGQUERY_PREPARE)
{
if (conn->result == NULL)
{
conn->result = PQmakeEmptyPGresult(conn,
PGRES_COMMAND_OK);
if (!conn->result)
return;
}
conn->asyncStatus = PGASYNC_READY;
}
break;
case '2': /* Bind Complete */
case '3': /* Close Complete */
/* Nothing to do for these message types */
break;
case 'S': /* parameter status */
if (getParameterStatus(conn))
return;
break;
case 'K': /* secret key data from the backend */
/*
* This is expected only during backend startup, but it's
* just as easy to handle it as part of the main loop.
* Save the data and continue processing.
*/
if (pqGetInt(&(conn->be_pid), 4, conn))
return;
if (pqGetInt(&(conn->be_key), 4, conn))
return;
break;
case 'T': /* Row Description */
if (conn->result == NULL ||
conn->queryclass == PGQUERY_DESCRIBE)
{
/* First 'T' in a query sequence */
if (getRowDescriptions(conn))
return;
/*
* If we're doing a Describe, we're ready to pass the
* result back to the client.
*/
if (conn->queryclass == PGQUERY_DESCRIBE)
conn->asyncStatus = PGASYNC_READY;
}
else
{
/*
* A new 'T' message is treated as the start of
* another PGresult. (It is not clear that this is
* really possible with the current backend.) We stop
* parsing until the application accepts the current
* result.
*/
conn->asyncStatus = PGASYNC_READY;
return;
}
break;
case 'n': /* No Data */
/*
* NoData indicates that we will not be seeing a
* RowDescription message because the statement or portal
* inquired about doesn't return rows. Set up a COMMAND_OK
* result, instead of TUPLES_OK.
*/
if (conn->result == NULL)
conn->result = PQmakeEmptyPGresult(conn,
PGRES_COMMAND_OK);
/*
* If we're doing a Describe, we're ready to pass the
* result back to the client.
*/
if (conn->queryclass == PGQUERY_DESCRIBE)
conn->asyncStatus = PGASYNC_READY;
break;
case 't': /* Parameter Description */
if (getParamDescriptions(conn))
return;
break;
case 'D': /* Data Row */
if (conn->result != NULL &&
conn->result->resultStatus == PGRES_TUPLES_OK)
{
/* Read another tuple of a normal query response */
if (getAnotherTuple(conn, msgLength))
return;
}
else if (conn->result != NULL &&
conn->result->resultStatus == PGRES_FATAL_ERROR)
{
/*
* We've already choked for some reason. Just discard
* tuples till we get to the end of the query.
*/
conn->inCursor += msgLength;
}
else
{
/* Set up to report error at end of query */
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("server sent data (\"D\" message) without prior row description (\"T\" message)\n"));
pqSaveErrorResult(conn);
/* Discard the unexpected message */
conn->inCursor += msgLength;
}
break;
case 'G': /* Start Copy In */
if (getCopyStart(conn, PGRES_COPY_IN))
return;
conn->asyncStatus = PGASYNC_COPY_IN;
break;
case 'H': /* Start Copy Out */
if (getCopyStart(conn, PGRES_COPY_OUT))
return;
conn->asyncStatus = PGASYNC_COPY_OUT;
conn->copy_already_done = 0;
break;
case 'd': /* Copy Data */
/*
* If we see Copy Data, just silently drop it. This would
* only occur if application exits COPY OUT mode too
* early.
*/
conn->inCursor += msgLength;
break;
case 'c': /* Copy Done */
/*
* If we see Copy Done, just silently drop it. This is
* the normal case during PQendcopy. We will keep
* swallowing data, expecting to see command-complete for
* the COPY command.
*/
break;
default:
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext(
"unexpected response from server; first received character was \"%c\"\n"),
id);
/* build an error result holding the error message */
pqSaveErrorResult(conn);
/* not sure if we will see more, so go to ready state */
conn->asyncStatus = PGASYNC_READY;
/* Discard the unexpected message */
conn->inCursor += msgLength;
break;
} /* switch on protocol character */
}
/* Successfully consumed this message */
if (conn->inCursor == conn->inStart + 5 + msgLength)
{
/* Normal case: parsing agrees with specified length */
conn->inStart = conn->inCursor;
}
else
{
/* Trouble --- report it */
printfPQExpBuffer(&conn->errorMessage,
libpq_gettext("message contents do not agree with length in message type \"%c\"\n"),
id);
/* build an error result holding the error message */
pqSaveErrorResult(conn);
conn->asyncStatus = PGASYNC_READY;
/* trust the specified message length as what to skip */
conn->inStart += 5 + msgLength;
}
}
}
