static void showFuelInfo2(float rpm, float engineLoad) {
float baseFuelMs = getBaseTableFuel(engineConfiguration, (int) rpm, engineLoad);
scheduleMsg(&logger, "SD magic fuel %f", sdMath(engineConfiguration, 100, 100, 14.7, convertCelsiusToKelvin(20)));
scheduleMsg(&logger, "inj flow %fcc/min displacement %fL", engineConfiguration->injector.flow,
engineConfiguration->specs.displacement);
scheduleMsg(&logger2, "algo=%s/pump=%s", getEngine_load_mode_e(engineConfiguration->algorithm),
boolToString(enginePins.fuelPumpRelay.getLogicValue()));
scheduleMsg(&logger2, "injection phase=%f/global fuel correction=%f", getinjectionOffset(rpm), engineConfiguration->globalFuelCorrection);
scheduleMsg(&logger2, "baro correction=%f", engine->engineState.baroCorrection);
#if EFI_ENGINE_CONTROL || defined(__DOXYGEN__)
scheduleMsg(&logger, "base cranking fuel %f", engineConfiguration->cranking.baseFuel);
scheduleMsg(&logger2, "cranking fuel: %f", getCrankingFuel(PASS_ENGINE_PARAMETER_F));
if (engine->rpmCalculator.isRunning()) {
float iatCorrection = engine->engineState.iatFuelCorrection;
float cltCorrection = engine->engineState.cltFuelCorrection;
float injectorLag = engine->injectorLagMs;
scheduleMsg(&logger2, "rpm=%f engineLoad=%f", rpm, engineLoad);
scheduleMsg(&logger2, "baseFuel=%f", baseFuelMs);
scheduleMsg(&logger2, "iatCorrection=%f cltCorrection=%f injectorLag=%f", iatCorrection, cltCorrection,
injectorLag);
float value = getRunningFuel(baseFuelMs, (int) rpm PASS_ENGINE_PARAMETER);
scheduleMsg(&logger2, "injection pulse width: %f", value);
}
#endif
}
/**
* @returns Length of each individual fuel injection, in milliseconds
*/
floatms_t getFuelMs(int rpm DECLARE_ENGINE_PARAMETER_S) {
float theoreticalInjectionLength;
if (isCrankingR(rpm)) {
theoreticalInjectionLength = getCrankingFuel(PASS_ENGINE_PARAMETER_F)
/ getNumberOfInjections(engineConfiguration->crankingInjectionMode PASS_ENGINE_PARAMETER);
} else {
float baseFuel = getBaseFuel(rpm PASS_ENGINE_PARAMETER);
float fuelPerCycle = getRunningFuel(baseFuel, rpm PASS_ENGINE_PARAMETER);
theoreticalInjectionLength = fuelPerCycle
/ getNumberOfInjections(engineConfiguration->injectionMode PASS_ENGINE_PARAMETER);
}
return theoreticalInjectionLength + ENGINE(injectorLagMs);
}
void testFuelMap(void) {
printf("*************************************************** testFuelMap\r\n");
EngineTestHelper eth(FORD_ASPIRE_1996);
for (int k = 0; k < FUEL_LOAD_COUNT; k++) {
for (int r = 0; r < FUEL_RPM_COUNT; r++) {
eth.engine.engineConfiguration->fuelTable[k][r] = k * 200 + r;
}
}
for (int i = 0; i < FUEL_LOAD_COUNT; i++)
eth.engine.engineConfiguration->fuelLoadBins[i] = i;
for (int i = 0; i < FUEL_RPM_COUNT; i++)
eth.engine.engineConfiguration->fuelRpmBins[i] = i;
assertEqualsM("base fuel table", 1005, getBaseTableFuel(eth.engine.engineConfiguration, 5, 5));
printf("*************************************************** initThermistors\r\n");
Engine *engine = ð.engine;
engine_configuration_s *engineConfiguration = engine->engineConfiguration;
initThermistors(engine);
printf("*** getInjectorLag\r\n");
assertEquals(1.0, getInjectorLag(12 PASS_ENGINE_PARAMETER));
eth.engine.engineConfiguration->injectorLag = 0.5;
for (int i = 0; i < VBAT_INJECTOR_CURVE_SIZE; i++) {
eth.engine.engineConfiguration->battInjectorLagCorrBins[i] = i;
eth.engine.engineConfiguration->battInjectorLagCorr[i] = 2 * i;
}
// because all the correction tables are zero
printf("*************************************************** getRunningFuel 1\r\n");
float baseFuel = getBaseTableFuel(eth.engine.engineConfiguration, 5, getEngineLoadT(PASS_ENGINE_PARAMETER_F));
assertEqualsM("base fuel", 5.05, getRunningFuel(baseFuel, 5 PASS_ENGINE_PARAMETER));
printf("*************************************************** setting IAT table\r\n");
for (int i = 0; i < IAT_CURVE_SIZE; i++) {
eth.engine.engineConfiguration->iatFuelCorrBins[i] = i;
eth.engine.engineConfiguration->iatFuelCorr[i] = 2 * i;
}
eth.engine.engineConfiguration->iatFuelCorr[0] = 2;
printf("*************************************************** setting CLT table\r\n");
for (int i = 0; i < CLT_CURVE_SIZE; i++) {
eth.engine.engineConfiguration->cltFuelCorrBins[i] = i;
eth.engine.engineConfiguration->cltFuelCorr[i] = 1;
}
eth.engine.engineConfiguration->injectorLag = 0;
assertEquals(NAN, getIntakeAirTemperature(ð.engine));
float iatCorrection = getIatCorrection(-KELV PASS_ENGINE_PARAMETER);
assertEqualsM("IAT", 2, iatCorrection);
float cltCorrection = getCltCorrection(getCoolantTemperature(ð.engine) PASS_ENGINE_PARAMETER);
assertEqualsM("CLT", 1, cltCorrection);
float injectorLag = getInjectorLag(getVBatt(engineConfiguration) PASS_ENGINE_PARAMETER);
assertEquals(0, injectorLag);
testMafValue = 5;
// 1005 * 2 for IAT correction
printf("*************************************************** getRunningFuel 2\r\n");
baseFuel = getBaseTableFuel(eth.engine.engineConfiguration, 5, getEngineLoadT(PASS_ENGINE_PARAMETER_F));
assertEqualsM("v1", 30150, getRunningFuel(baseFuel, 5 PASS_ENGINE_PARAMETER));
testMafValue = 0;
engineConfiguration->crankingSettings.baseCrankingFuel = 4;
printf("*************************************************** getStartingFuel\r\n");
// NAN in case we have issues with the CLT sensor
assertEqualsM("getStartingFuel nan", 4, getCrankingFuel3(engineConfiguration, NAN, 0));
assertEqualsM("getStartingFuel#1", 23.7333, getCrankingFuel3(engineConfiguration, 0, 4));
assertEqualsM("getStartingFuel#2", 18.0419, getCrankingFuel3(engineConfiguration, 8, 15));
assertEqualsM("getStartingFuel#3", 11.2000, getCrankingFuel3(engineConfiguration, 70, 0));
assertEqualsM("getStartingFuel#3", 5.6000, getCrankingFuel3(engineConfiguration, 70, 50));
}
void testFuelMap(void) {
chDbgCheck(engineConfiguration!=NULL, "engineConfiguration");
printf("*************************************************** testFuelMap\r\n");
for (int k = 0; k < FUEL_LOAD_COUNT; k++) {
for (int r = 0; r < FUEL_RPM_COUNT; r++) {
engineConfiguration->fuelTable[k][r] = k * 200 + r;
}
}
printf("*************************************************** initThermistors\r\n");
initThermistors();
printf("*** getInjectorLag\r\n");
assertEquals(0, getInjectorLag(12));
for (int i = 0; i < FUEL_LOAD_COUNT; i++)
engineConfiguration->fuelLoadBins[i] = i;
for (int i = 0; i < FUEL_RPM_COUNT; i++)
engineConfiguration->fuelRpmBins[i] = i;
printf("*************************************************** prepareFuelMap\r\n");
assertEquals(1005, getBaseTableFuel(5, 5));
engineConfiguration->injectorLag = 0.5;
for (int i = 0; i < VBAT_INJECTOR_CURVE_SIZE; i++) {
engineConfiguration->battInjectorLagCorrBins[i] = i;
engineConfiguration->battInjectorLagCorr[i] = 2 * i;
}
EngineTestHelper eth(FORD_ASPIRE_1996);
// because all the correction tables are zero
printf("*************************************************** getRunningFuel\r\n");
float baseFuel = getBaseTableFuel(5, getEngineLoadT(ð.engine));
assertEqualsM("value", 0.5, getRunningFuel(baseFuel, ð.engine, 5));
printf("*************************************************** setting IAT table\r\n");
for (int i = 0; i < IAT_CURVE_SIZE; i++) {
engineConfiguration->iatFuelCorrBins[i] = i;
engineConfiguration->iatFuelCorr[i] = 2 * i;
}
engineConfiguration->iatFuelCorr[0] = 2;
printf("*************************************************** setting CLT table\r\n");
for (int i = 0; i < CLT_CURVE_SIZE; i++) {
engineConfiguration->cltFuelCorrBins[i] = i;
engineConfiguration->cltFuelCorr[i] = 1;
}
engineConfiguration->injectorLag = 0;
assertEquals(NAN, getIntakeAirTemperature());
float iatCorrection = getIatCorrection(-KELV);
assertEqualsM("IAT", 2, iatCorrection);
float cltCorrection = getCltCorrection(getCoolantTemperature());
assertEqualsM("CLT", 1, cltCorrection);
float injectorLag = getInjectorLag(getVBatt());
assertEquals(0, injectorLag);
testMafValue = 5;
// 1005 * 2 for IAT correction
printf("*************************************************** getRunningFuel\r\n");
baseFuel = getBaseTableFuel(5, getEngineLoadT(ð.engine));
assertEqualsM("v1", 30150, getRunningFuel(baseFuel, ð.engine, 5));
testMafValue = 0;
engineConfiguration->crankingSettings.coolantTempMaxC = 65; // 8ms at 65C
engineConfiguration->crankingSettings.fuelAtMaxTempMs = 8;
engineConfiguration->crankingSettings.coolantTempMinC = 0; // 20ms at 0C
engineConfiguration->crankingSettings.fuelAtMinTempMs = 20;
printf("*************************************************** getStartingFuel\r\n");
// NAN in case we have issues with the CLT sensor
// assertEquals(16, getStartingFuel(NAN));
assertEquals(20, getStartingFuel(0));
assertEquals(18.5231, getStartingFuel(8));
assertEquals(8, getStartingFuel(70));
}
