// -------------------------------------------------------
QString SParamFile::netlist()
{
QString s = Model+":"+Name;
// output all node names
for(Port *p1 = Ports.first(); p1 != 0; p1 = Ports.next())
s += " "+p1->Connection->Name; // node names
// output all properties
Property *p2 = Props.first();
s += " "+p2->Name+"=\"{"+getSubcircuitFile()+"}\"";
// data type
p2 = Props.next();
s += " "+p2->Name+"=\""+p2->Value+"\"";
// interpolator type
p2 = Props.next();
s += " "+p2->Name+"=\""+p2->Value+"\"";
// DC property
p2 = Props.next();
s += " "+p2->Name+"=\""+p2->Value+"\"\n";
return s;
}
// ---------------------------------------------------------------------
// Makes the schematic symbol subcircuit with the correct number
// of ports.
void Subcircuit::createSymbol()
{
int No;
QString FileName(Props.getFirst()->Value);
FileName = getSubcircuitFile();
tx = INT_MIN;
ty = INT_MIN;
if(loadSymbol(FileName) > 0) { // try to load subcircuit symbol
if(tx == INT_MIN) tx = x1+4;
if(ty == INT_MIN) ty = y2+4;
// remove unused ports
for(Port *pp = Ports.first(); pp != 0; ) {
if(!pp->avail) { Ports.remove(); pp = Ports.current (); }
else pp = Ports.next();
}
}
else {
No = QucsApp::testFile(FileName);
if(No < 0) No = 0;
Ports.clear();
remakeSymbol(No); // no symbol was found -> create standard symbol
}
}
// ---------------------------------------------------------------------
// Makes the schematic symbol subcircuit with the correct number
// of ports.
void Subcircuit::createSymbol()
{
int No;
QString FileName(Props.getFirst()->Value);
FileName = getSubcircuitFile();
tx = INT_MIN;
ty = INT_MIN;
if(loadSymbol(FileName) > 0) { // try to load subcircuit symbol
if(tx == INT_MIN) tx = x1+4;
if(ty == INT_MIN) ty = y2+4;
// remove unused ports
QMutableListIterator<Port *> ip(Ports);
Port *pp;
while (ip.hasNext()) {
pp = ip.next();
if(!pp->avail) {
pp = ip.peekNext();
ip.remove();
}
}
}
else {
No = QucsApp::testFile(FileName);
if(No < 0) No = 0;
Ports.clear();
remakeSymbol(No); // no symbol was found -> create standard symbol
}
}
// -------------------------------------------------------
bool VHDL_File::createSubNetlist(QTextStream *stream)
{
ErrText = "";
// check filename
QString FileName = Props.getFirst()->Value;
if(FileName.isEmpty()) {
ErrText += QObject::tr("ERROR: No file name in %1 component \"%2\".").
arg(Model).arg(Name);
return false;
}
// construct full filename
FileName = getSubcircuitFile();
// open file for reading
QFile f(FileName);
if(!f.open(QIODevice::ReadOnly)) {
ErrText += QObject::tr("ERROR: Cannot open %1 file \"%2\".").
arg(Model).arg(FileName);
return false;
}
// write the whole VHDL file into the netlist output
QByteArray FileContent = f.readAll();
f.close();
(*stream) << '\n';
//? stream->writeRawBytes(FileContent.data(), FileContent.size());
(*stream) << FileContent.data();
(*stream) << '\n';
return true;
}
// -------------------------------------------------------------------------
bool SpiceFile::createSubNetlist(QTextStream *stream)
{
// check file name
QString FileName = Props.first()->Value;
if(FileName.isEmpty()) {
ErrText += QObject::tr("ERROR: No file name in SPICE component \"%1\".").
arg(Name);
return false;
}
// check input and output file
QFile SpiceFile, ConvFile;
FileName = getSubcircuitFile();
SpiceFile.setName(FileName);
if(!SpiceFile.open(QIODevice::ReadOnly)) {
ErrText += QObject::tr("ERROR: Cannot open SPICE file \"%1\".").
arg(FileName);
return false;
}
SpiceFile.close();
QString ConvName = SpiceFile.name() + ".lst";
ConvFile.setName(ConvName);
QFileInfo Info(ConvName);
// re-create converted file if necessary
if(changed || !ConvFile.exists() ||
(lastLoaded.isValid() && lastLoaded < Info.lastModified())) {
if(!ConvFile.open(QIODevice::WriteOnly)) {
ErrText +=
QObject::tr("ERROR: Cannot save converted SPICE file \"%1\".").
arg(FileName + ".lst");
return false;
}
outstream = stream;
filstream = new QTextStream(&ConvFile);
QString SpiceName = SpiceFile.name();
bool ret = recreateSubNetlist(&SpiceName, &FileName);
ConvFile.close();
delete filstream;
return ret;
}
// load old file and stuff into stream
if(!ConvFile.open(QIODevice::ReadOnly)) {
ErrText +=
QObject::tr("ERROR: Cannot open converted SPICE file \"%1\".").
arg(FileName + ".lst");
return false;
}
QByteArray FileContent = ConvFile.readAll();
ConvFile.close();
//? stream->writeRawBytes(FileContent.data(), FileContent.size());
(*stream) << FileContent.data();
return true;
}
bool SpiceFile::createSpiceSubckt(QTextStream *stream)
{
(*stream)<<"\n";
QFile sub_file(getSubcircuitFile());
if (sub_file.open(QIODevice::ReadOnly|QFile::Text)) {
QTextStream ts(&sub_file);
(*stream)<<ts.readAll().remove(QChar(0x1A));
sub_file.close();
}
(*stream)<<"\n";
return true;
}
QString SpiceFile::getSubcktName()
{
QString s = "";
QFile sub_file(getSubcircuitFile());
if (sub_file.open(QIODevice::ReadOnly)) {
QStringList lst = QString(sub_file.readAll()).split("\n");
foreach (QString str, lst) {
QRegExp subckt_header("^\\s*\\.(S|s)(U|u)(B|b)(C|c)(K|k)(T|t)\\s.*");
if (subckt_header.exactMatch(str)) {
QRegExp sep("\\s");
s = str.section(sep,1,1,QString::SectionSkipEmpty);
}
}
// -------------------------------------------------------
QString iFile::netlist()
{
QString s = Model+":"+Name;
// output all node names
foreach(Port *p1, Ports)
s += " "+p1->Connection->Name; // node names
// output file properties
Property *p2 = Props.first();
s += " "+p2->Name+"=\"{"+getSubcircuitFile()+"}\"";
// output all remaining properties
for(p2 = Props.next(); p2 != 0; p2 = Props.next())
s += " "+p2->Name+"=\""+p2->Value+"\"";
return s + "\n";
}
// -------------------------------------------------------
bool LibComp::createSubNetlist(QTextStream *stream, QStringList &FileList,
int type)
{
int r = -1;
QString FileString;
QStringList Includes;
if(type&1) {
r = loadSection("Model", FileString, &Includes);
} else if(type&2) {
r = loadSection("VHDLModel", FileString, &Includes);
} else if(type&4) {
r = loadSection("VerilogModel", FileString, &Includes);
}
if(r < 0) return false;
// also include files
int error = 0;
for(QStringList::Iterator it = Includes.begin();
it != Includes.end(); ++it ) {
QString s = getSubcircuitFile()+"/"+*it;
if(FileList.findIndex(s) >= 0) continue;
FileList.append(s);
// load file and stuff into stream
QFile file(s);
if(!file.open(QIODevice::ReadOnly)) {
error++;
} else {
QByteArray FileContent = file.readAll();
file.close();
//?stream->writeRawBytes(FileContent.data(), FileContent.size());
(*stream) << FileContent.data();
qDebug() << "hi from libcomp";
}
}
(*stream) << "\n" << FileString << "\n";
return error > 0 ? false : true;
}
