/* populate connectivity info */
void flp_populate_connects(flp_t *flp, FILE *fp)
{
char str1[LINE_SIZE], str2[LINE_SIZE];
char name1[STR_SIZE], name2[STR_SIZE];
/* dummy fields */
double f1, f2, f3, f4, f5, f6;
double wire_density;
char *ptr;
int x, y, temp;
/* initialize wire_density */
for(x=0; x < flp->n_units; x++)
for(y=0; y < flp->n_units; y++)
flp->wire_density[x][y] = 0.0;
fseek(fp, 0, SEEK_SET);
while(!feof(fp)) {
fgets(str1, LINE_SIZE, fp);
if (feof(fp))
break;
strcpy(str2, str1);
/* ignore comments and empty lines */
ptr = strtok(str1, " \r\t\n");
if (!ptr || ptr[0] == '#')
continue;
/* lines with unit positions */
if (sscanf(str2, "%s%lf%lf%lf%lf%lf%lf", name1, &f1, &f2, &f3, &f4, &f5, &f6) == 7 ||
/* flp_desc like lines. ignore them */
sscanf(str2, "%s%lf%lf%lf%d", name1, &f1, &f2, &f3, &temp) == 5)
continue;
/* lines with connectivity info */
else if (sscanf(str2, "%s%s%lf", name1, name2, &wire_density) == 3) {
x = get_blk_index(flp, name1);
y = get_blk_index(flp, name2);
if (x == y)
fatal("block connected to itself?\n");
if (!flp->wire_density[x][y] && !flp->wire_density[y][x])
flp->wire_density[x][y] = flp->wire_density[y][x] = wire_density;
else if((flp->wire_density[x][y] != flp->wire_density[y][x]) ||
(flp->wire_density[x][y] != wire_density)) {
sprintf(str2, "wrong connectivity information for blocks %s and %s\n",
name1, name2);
fatal(str2);
}
} else
fatal("invalid floorplan file format\n");
} /* end while */
}
/*
* read temperature vector alloced using 'hotspot_vector' from 'file'
* which was dumped using 'dump_vector'. values are clipped to thermal
* threshold based on 'clip'
*/
void read_temp(flp_t *flp, double *temp, char *file, int clip)
{
int i, idx;
double max=0, val;
char str[STR_SIZE], name[STR_SIZE];
FILE *fp = fopen (file, "r");
if (!fp) {
sprintf (str,"error: %s could not be opened for reading\n", file);
fatal(str);
}
/* find max temp on the chip */
for (i=0; i < flp->n_units; i++) {
fgets(str, STR_SIZE, fp);
if (feof(fp))
fatal("not enough lines in temperature file\n");
if (sscanf(str, "%s%lf", name, &val) != 2)
fatal("invalid temperature file format\n");
idx = get_blk_index(flp, name);
if (idx >= 0)
temp[idx] = val;
else /* since get_blk_index calls fatal, the line below cannot be reached */
fatal ("unit in temperature file not found in floorplan\n");
if (temp[idx] > max)
max = temp[idx];
}
/* internal node temperatures */
for (i=0; i < EXTRA; i++) {
fgets(str, STR_SIZE, fp);
if (feof(fp))
fatal("not enough lines in temperature file\n");
if (sscanf(str, "%s%lf", name, &val) != 2)
fatal("invalid temperature file format\n");
sprintf(str, "inode_%d", i);
if (strcasecmp(str, name))
fatal("invalid temperature file format\n");
temp[i+flp->n_units] = val;
}
fclose(fp);
/* clipping */
if (clip && (max > thermal_threshold)) {
/* if max has to be brought down to thermal_threshold,
* (w.r.t the ambient) what is the scale down factor?
*/
double factor = (thermal_threshold - ambient) / (max - ambient);
/* scale down all temperature differences (from ambient) by the same factor */
for (i=0; i < flp->n_units + EXTRA; i++)
temp[i] = (temp[i]-ambient)*factor + ambient;
}
}
/*
* read power vector alloced using 'hotspot_vector' from 'file'
* which was dumped using 'dump_power'.
*/
void read_power_block (block_model_t *model, double *power, char *file)
{
flp_t *flp = model->flp;
int idx;
double val;
char *ptr, str1[LINE_SIZE], str2[LINE_SIZE], name[STR_SIZE];
FILE *fp;
if (!strcasecmp(file, "stdin"))
fp = stdin;
else
fp = fopen (file, "r");
if (!fp) {
sprintf (str1,"error: %s could not be opened for reading\n", file);
fatal(str1);
}
while(!feof(fp)) {
fgets(str1, LINE_SIZE, fp);
if (feof(fp))
break;
strcpy(str2, str1);
/* ignore comments and empty lines */
ptr = strtok(str1, " \r\t\n");
if (!ptr || ptr[0] == '#')
continue;
if (sscanf(str2, "%s%lf", name, &val) != 2)
fatal("invalid power file format\n");
idx = get_blk_index(flp, name);
if (idx >= 0)
power[idx] = val;
else /* since get_blk_index calls fatal, the line below cannot be reached */
fatal ("unit in power file not found in floorplan\n");
}
if(fp != stdin)
fclose(fp);
}
/*
* main function - reads instantaneous power values (in W) from a trace
* file (e.g. "gcc.ptrace") and outputs instantaneous temperature values (in C) to
* a trace file("gcc.ttrace"). also outputs steady state temperature values
* (including those of the internal nodes of the model) onto stdout. the
* trace files are 2-d matrices with each column representing a functional
* functional block and each row representing a time unit(sampling_intvl).
* columns are tab-separated and each row is a separate line. the first
* line contains the names of the functional blocks. the order in which
* the columns are specified doesn't have to match that of the floorplan
* file.
*/
int main(int argc, char **argv)
{
int i, j, idx, base = 0, count = 0, n = 0;
int num, size, lines = 0, do_transient = TRUE;
char **names;
double *vals;
/* trace file pointers */
FILE *pin, *tout = NULL;
/* floorplan */
flp_t *flp;
/* hotspot temperature model */
RC_model_t *model;
/* instantaneous temperature and power values */
double *temp = NULL, *power;
double total_power = 0.0;
/* steady state temperature and power values */
double *overall_power, *steady_temp;
/* thermal model configuration parameters */
thermal_config_t thermal_config;
/* global configuration parameters */
global_config_t global_config;
/* table to hold options and configuration */
str_pair table[MAX_ENTRIES];
/* variables for natural convection iterations */
int natural = 0;
double avg_sink_temp = 0;
int natural_convergence = 0;
double r_convec_old;
if (!(argc >= 5 && argc % 2)) {
usage(argc, argv);
return 1;
}
size = parse_cmdline(table, MAX_ENTRIES, argc, argv);
global_config_from_strs(&global_config, table, size);
/* no transient simulation, only steady state */
if(!strcmp(global_config.t_outfile, NULLFILE))
do_transient = FALSE;
/* read configuration file */
if (strcmp(global_config.config, NULLFILE))
size += read_str_pairs(&table[size], MAX_ENTRIES, global_config.config);
/*
* earlier entries override later ones. so, command line options
* have priority over config file
*/
size = str_pairs_remove_duplicates(table, size);
/* get defaults */
thermal_config = default_thermal_config();
/* modify according to command line / config file */
thermal_config_add_from_strs(&thermal_config, table, size);
/* if package model is used, run package model */
if (((idx = get_str_index(table, size, "package_model_used")) >= 0) && !(table[idx].value==0)) {
if (thermal_config.package_model_used) {
avg_sink_temp = thermal_config.ambient + SMALL_FOR_CONVEC;
natural = package_model(&thermal_config, table, size, avg_sink_temp);
if (thermal_config.r_convec<R_CONVEC_LOW || thermal_config.r_convec>R_CONVEC_HIGH)
printf("Warning: Heatsink convection resistance is not realistic, double-check your package settings...\n");
}
}
/* dump configuration if specified */
if (strcmp(global_config.dump_config, NULLFILE)) {
size = global_config_to_strs(&global_config, table, MAX_ENTRIES);
size += thermal_config_to_strs(&thermal_config, &table[size], MAX_ENTRIES-size);
/* prefix the name of the variable with a '-' */
dump_str_pairs(table, size, global_config.dump_config, "-");
}
/* initialization: the flp_file global configuration
* parameter is overridden by the layer configuration
* file in the grid model when the latter is specified.
*/
flp = read_flp(global_config.flp_file, FALSE);
/* allocate and initialize the RC model */
model = alloc_RC_model(&thermal_config, flp);
populate_R_model(model, flp);
if (do_transient)
populate_C_model(model, flp);
#if VERBOSE > 2
debug_print_model(model);
#endif
/* allocate the temp and power arrays */
/* using hotspot_vector to internally allocate any extra nodes needed */
if (do_transient)
temp = hotspot_vector(model);
power = hotspot_vector(model);
steady_temp = hotspot_vector(model);
overall_power = hotspot_vector(model);
/* set up initial instantaneous temperatures */
if (do_transient && strcmp(model->config->init_file, NULLFILE)) {
if (!model->config->dtm_used) /* initial T = steady T for no DTM */
read_temp(model, temp, model->config->init_file, FALSE);
else /* initial T = clipped steady T with DTM */
read_temp(model, temp, model->config->init_file, TRUE);
} else if (do_transient) /* no input file - use init_temp as the common temperature */
set_temp(model, temp, model->config->init_temp);
/* n is the number of functional blocks in the block model
* while it is the sum total of the number of functional blocks
* of all the floorplans in the power dissipating layers of the
* grid model.
*/
if (model->type == BLOCK_MODEL)
n = model->block->flp->n_units;
else if (model->type == GRID_MODEL) {
for(i=0; i < model->grid->n_layers; i++)
if (model->grid->layers[i].has_power)
n += model->grid->layers[i].flp->n_units;
} else
fatal("unknown model type\n");
if(!(pin = fopen(global_config.p_infile, "r")))
fatal("unable to open power trace input file\n");
if(do_transient && !(tout = fopen(global_config.t_outfile, "w")))
fatal("unable to open temperature trace file for output\n");
/* names of functional units */
names = alloc_names(MAX_UNITS, STR_SIZE);
if(read_names(pin, names) != n)
fatal("no. of units in floorplan and trace file differ\n");
/* header line of temperature trace */
if (do_transient)
write_names(tout, names, n);
/* read the instantaneous power trace */
vals = dvector(MAX_UNITS);
while ((num=read_vals(pin, vals)) != 0) {
if(num != n)
fatal("invalid trace file format\n");
/* permute the power numbers according to the floorplan order */
if (model->type == BLOCK_MODEL)
for(i=0; i < n; i++)
power[get_blk_index(flp, names[i])] = vals[i];
else
for(i=0, base=0, count=0; i < model->grid->n_layers; i++) {
if(model->grid->layers[i].has_power) {
for(j=0; j < model->grid->layers[i].flp->n_units; j++) {
idx = get_blk_index(model->grid->layers[i].flp, names[count+j]);
power[base+idx] = vals[count+j];
}
count += model->grid->layers[i].flp->n_units;
}
base += model->grid->layers[i].flp->n_units;
}
/* compute temperature */
if (do_transient) {
/* if natural convection is considered, update transient convection resistance first */
if (natural) {
avg_sink_temp = calc_sink_temp(model, temp);
natural = package_model(model->config, table, size, avg_sink_temp);
populate_R_model(model, flp);
}
/* for the grid model, only the first call to compute_temp
* passes a non-null 'temp' array. if 'temp' is NULL,
* compute_temp remembers it from the last non-null call.
* this is used to maintain the internal grid temperatures
* across multiple calls of compute_temp
*/
if (model->type == BLOCK_MODEL || lines == 0)
compute_temp(model, power, temp, model->config->sampling_intvl);
else
compute_temp(model, power, NULL, model->config->sampling_intvl);
/* permute back to the trace file order */
if (model->type == BLOCK_MODEL)
for(i=0; i < n; i++)
vals[i] = temp[get_blk_index(flp, names[i])];
else
for(i=0, base=0, count=0; i < model->grid->n_layers; i++) {
if(model->grid->layers[i].has_power) {
for(j=0; j < model->grid->layers[i].flp->n_units; j++) {
idx = get_blk_index(model->grid->layers[i].flp, names[count+j]);
vals[count+j] = temp[base+idx];
}
count += model->grid->layers[i].flp->n_units;
}
base += model->grid->layers[i].flp->n_units;
}
/* output instantaneous temperature trace */
write_vals(tout, vals, n);
}
/* for computing average */
if (model->type == BLOCK_MODEL)
for(i=0; i < n; i++)
overall_power[i] += power[i];
else
for(i=0, base=0; i < model->grid->n_layers; i++) {
if(model->grid->layers[i].has_power)
for(j=0; j < model->grid->layers[i].flp->n_units; j++)
overall_power[base+j] += power[base+j];
base += model->grid->layers[i].flp->n_units;
}
lines++;
}
if(!lines)
fatal("no power numbers in trace file\n");
/* for computing average */
if (model->type == BLOCK_MODEL)
for(i=0; i < n; i++) {
overall_power[i] /= lines;
//overall_power[i] /=150; //reduce input power for natural convection
total_power += overall_power[i];
}
else
for(i=0, base=0; i < model->grid->n_layers; i++) {
if(model->grid->layers[i].has_power)
for(j=0; j < model->grid->layers[i].flp->n_units; j++) {
overall_power[base+j] /= lines;
total_power += overall_power[base+j];
}
base += model->grid->layers[i].flp->n_units;
}
/* natural convection r_convec iteration, for steady-state only */
natural_convergence = 0;
if (natural) { /* natural convection is used */
while (!natural_convergence) {
r_convec_old = model->config->r_convec;
/* steady state temperature */
steady_state_temp(model, overall_power, steady_temp);
avg_sink_temp = calc_sink_temp(model, steady_temp) + SMALL_FOR_CONVEC;
natural = package_model(model->config, table, size, avg_sink_temp);
populate_R_model(model, flp);
if (avg_sink_temp > MAX_SINK_TEMP)
fatal("too high power for a natural convection package -- possible thermal runaway\n");
if (fabs(model->config->r_convec-r_convec_old)<NATURAL_CONVEC_TOL)
natural_convergence = 1;
}
} else /* natural convection is not used, no need for iterations */
/* steady state temperature */
steady_state_temp(model, overall_power, steady_temp);
/* print steady state results */
fprintf(stdout, "Unit\tSteady(Kelvin)\n");
dump_temp(model, steady_temp, "stdout");
/* dump steady state temperatures on to file if needed */
if (strcmp(model->config->steady_file, NULLFILE))
dump_temp(model, steady_temp, model->config->steady_file);
/* for the grid model, optionally dump the most recent
* steady state temperatures of the grid cells
*/
if (model->type == GRID_MODEL &&
strcmp(model->config->grid_steady_file, NULLFILE))
dump_steady_temp_grid(model->grid, model->config->grid_steady_file);
#if VERBOSE > 2
if (model->type == BLOCK_MODEL) {
if (do_transient) {
fprintf(stdout, "printing temp...\n");
dump_dvector(temp, model->block->n_nodes);
}
fprintf(stdout, "printing steady_temp...\n");
dump_dvector(steady_temp, model->block->n_nodes);
} else {
if (do_transient) {
fprintf(stdout, "printing temp...\n");
dump_dvector(temp, model->grid->total_n_blocks + EXTRA);
}
fprintf(stdout, "printing steady_temp...\n");
dump_dvector(steady_temp, model->grid->total_n_blocks + EXTRA);
}
#endif
/* cleanup */
fclose(pin);
if (do_transient)
fclose(tout);
delete_RC_model(model);
free_flp(flp, FALSE);
if (do_transient)
free_dvector(temp);
free_dvector(power);
free_dvector(steady_temp);
free_dvector(overall_power);
free_names(names);
free_dvector(vals);
return 0;
}
/*
* read temperature vector alloced using 'hotspot_vector' from 'file'
* which was dumped using 'dump_temp'. values are clipped to thermal
* threshold based on 'clip'
*/
void read_temp_block(block_model_t *model, double *temp, char *file, int clip)
{
/* shortcuts */
flp_t *flp = model->flp;
double thermal_threshold = model->config.thermal_threshold;
double ambient = model->config.ambient;
int i, n, idx;
double max=0, val;
char *ptr, str1[LINE_SIZE], str2[LINE_SIZE];
char name[STR_SIZE], format[STR_SIZE];
FILE *fp;
if (!strcasecmp(file, "stdin"))
fp = stdin;
else
fp = fopen (file, "r");
if (!fp) {
sprintf (str1,"error: %s could not be opened for reading\n", file);
fatal(str1);
}
/* temperatures of the different layers */
for (n=0; n < NL; n++) {
switch(n)
{
case 0:
strcpy(format,"%s%lf");
break;
case IFACE:
strcpy(format,"iface_%s%lf");
break;
case HSP:
strcpy(format,"hsp_%s%lf");
break;
case HSINK:
strcpy(format,"hsink_%s%lf");
break;
default:
fatal("unknown layer\n");
break;
}
for (i=0; i < flp->n_units; i++) {
fgets(str1, LINE_SIZE, fp);
if (feof(fp))
fatal("not enough lines in temperature file\n");
strcpy(str2, str1);
/* ignore comments and empty lines */
ptr = strtok(str1, " \r\t\n");
if (!ptr || ptr[0] == '#') {
i--;
continue;
}
if (sscanf(str2, format, name, &val) != 2)
fatal("invalid temperature file format\n");
idx = get_blk_index(flp, name);
if (idx >= 0)
temp[idx + n*flp->n_units] = val;
else /* since get_blk_index calls fatal, the line below cannot be reached */
fatal ("unit in temperature file not found in floorplan\n");
/* find max temp on the chip */
if (n == 0 && temp[idx] > max)
max = temp[idx];
}
}
/* internal node temperatures */
for (i=0; i < EXTRA; i++) {
fgets(str1, LINE_SIZE, fp);
if (feof(fp))
fatal("not enough lines in temperature file\n");
strcpy(str2, str1);
/* ignore comments and empty lines */
ptr = strtok(str1, " \r\t\n");
if (!ptr || ptr[0] == '#') {
i--;
continue;
}
if (sscanf(str2, "%s%lf", name, &val) != 2)
fatal("invalid temperature file format\n");
sprintf(str1, "inode_%d", i);
if (strcasecmp(str1, name))
fatal("invalid temperature file format\n");
temp[i+NL*flp->n_units] = val;
}
fgets(str1, LINE_SIZE, fp);
if (!feof(fp))
fatal("too many lines in temperature file\n");
if(fp != stdin)
fclose(fp);
/* clipping */
if (clip && (max > thermal_threshold)) {
/* if max has to be brought down to thermal_threshold,
* (w.r.t the ambient) what is the scale down factor?
*/
double factor = (thermal_threshold - ambient) / (max - ambient);
/* scale down all temperature differences (from ambient) by the same factor */
for (i=0; i < NL*flp->n_units + EXTRA; i++)
temp[i] = (temp[i]-ambient)*factor + ambient;
}
}
