/*
* Set an RLE pixel from R, G, B values
*/
void SkBmpRLECodec::setRGBPixel(void* dst, size_t dstRowBytes,
const SkImageInfo& dstInfo, uint32_t x,
uint32_t y, uint8_t red, uint8_t green,
uint8_t blue) {
if (dst && is_coord_necessary(x, fSampleX, dstInfo.width())) {
// Set the row
uint32_t row = this->getDstRow(y, dstInfo.height());
// Set the pixel based on destination color type
const int dstX = get_dst_coord(x, fSampleX);
switch (dstInfo.colorType()) {
case kRGBA_8888_SkColorType: {
SkPMColor* dstRow = SkTAddOffset<SkPMColor>(dst, row * (int) dstRowBytes);
dstRow[dstX] = SkPackARGB_as_RGBA(0xFF, red, green, blue);
break;
}
case kBGRA_8888_SkColorType: {
SkPMColor* dstRow = SkTAddOffset<SkPMColor>(dst, row * (int) dstRowBytes);
dstRow[dstX] = SkPackARGB_as_BGRA(0xFF, red, green, blue);
break;
}
case kRGB_565_SkColorType: {
uint16_t* dstRow = SkTAddOffset<uint16_t>(dst, row * (int) dstRowBytes);
dstRow[dstX] = SkPack888ToRGB16(red, green, blue);
break;
}
default:
// This case should not be reached. We should catch an invalid
// color type when we check that the conversion is possible.
SkASSERT(false);
break;
}
}
}
/*
* Set an RLE pixel using the color table
*/
void SkBmpRLECodec::setPixel(void* dst, size_t dstRowBytes,
const SkImageInfo& dstInfo, uint32_t x, uint32_t y,
uint8_t index) {
if (is_coord_necessary(x, fSampleX, dstInfo.width())) {
// Set the row
uint32_t row = this->getDstRow(y, dstInfo.height());
// Set the pixel based on destination color type
const int dstX = get_dst_coord(x, fSampleX);
switch (dstInfo.colorType()) {
case kN32_SkColorType: {
SkPMColor* dstRow = SkTAddOffset<SkPMColor>(dst, row * (int) dstRowBytes);
dstRow[dstX] = fColorTable->operator[](index);
break;
}
case kRGB_565_SkColorType: {
uint16_t* dstRow = SkTAddOffset<uint16_t>(dst, row * (int) dstRowBytes);
dstRow[dstX] = SkPixel32ToPixel16(fColorTable->operator[](index));
break;
}
default:
// This case should not be reached. We should catch an invalid
// color type when we check that the conversion is possible.
SkASSERT(false);
break;
}
}
}
SkCodec::Result SkSampledCodec::sampledDecode(const SkImageInfo& info, void* pixels,
size_t rowBytes, const AndroidOptions& options) {
// We should only call this function when sampling.
SkASSERT(options.fSampleSize > 1);
// Create options struct for the codec.
SkCodec::Options sampledOptions;
sampledOptions.fZeroInitialized = options.fZeroInitialized;
sampledOptions.fPremulBehavior = SkTransferFunctionBehavior::kIgnore;
// FIXME: This was already called by onGetAndroidPixels. Can we reduce that?
int sampleSize = options.fSampleSize;
int nativeSampleSize;
SkISize nativeSize = this->accountForNativeScaling(&sampleSize, &nativeSampleSize);
// Check if there is a subset.
SkIRect subset;
int subsetY = 0;
int subsetWidth = nativeSize.width();
int subsetHeight = nativeSize.height();
if (options.fSubset) {
// We will need to know about subsetting in the y-dimension in order to use the
// scanline decoder.
// Update the subset to account for scaling done by this->codec().
const SkIRect* subsetPtr = options.fSubset;
// Do the divide ourselves, instead of calling get_scaled_dimension. If
// X and Y are 0, they should remain 0, rather than being upgraded to 1
// due to being smaller than the sampleSize.
const int subsetX = subsetPtr->x() / nativeSampleSize;
subsetY = subsetPtr->y() / nativeSampleSize;
subsetWidth = get_scaled_dimension(subsetPtr->width(), nativeSampleSize);
subsetHeight = get_scaled_dimension(subsetPtr->height(), nativeSampleSize);
// The scanline decoder only needs to be aware of subsetting in the x-dimension.
subset.setXYWH(subsetX, 0, subsetWidth, nativeSize.height());
sampledOptions.fSubset = ⊂
}
// Since we guarantee that output dimensions are always at least one (even if the sampleSize
// is greater than a given dimension), the input sampleSize is not always the sampleSize that
// we use in practice.
const int sampleX = subsetWidth / info.width();
const int sampleY = subsetHeight / info.height();
const int samplingOffsetY = get_start_coord(sampleY);
const int startY = samplingOffsetY + subsetY;
const int dstHeight = info.height();
const SkImageInfo nativeInfo = info.makeWH(nativeSize.width(), nativeSize.height());
{
// Although startScanlineDecode expects the bottom and top to match the
// SkImageInfo, startIncrementalDecode uses them to determine which rows to
// decode.
SkCodec::Options incrementalOptions = sampledOptions;
SkIRect incrementalSubset;
if (sampledOptions.fSubset) {
incrementalSubset.fTop = subsetY;
incrementalSubset.fBottom = subsetY + subsetHeight;
incrementalSubset.fLeft = sampledOptions.fSubset->fLeft;
incrementalSubset.fRight = sampledOptions.fSubset->fRight;
incrementalOptions.fSubset = &incrementalSubset;
}
const SkCodec::Result startResult = this->codec()->startIncrementalDecode(nativeInfo,
pixels, rowBytes, &incrementalOptions);
if (SkCodec::kSuccess == startResult) {
SkSampler* sampler = this->codec()->getSampler(true);
if (!sampler) {
return SkCodec::kUnimplemented;
}
if (sampler->setSampleX(sampleX) != info.width()) {
return SkCodec::kInvalidScale;
}
if (get_scaled_dimension(subsetHeight, sampleY) != info.height()) {
return SkCodec::kInvalidScale;
}
sampler->setSampleY(sampleY);
int rowsDecoded;
const SkCodec::Result incResult = this->codec()->incrementalDecode(&rowsDecoded);
if (incResult == SkCodec::kSuccess) {
return SkCodec::kSuccess;
}
SkASSERT(incResult == SkCodec::kIncompleteInput || incResult == SkCodec::kErrorInInput);
SkASSERT(rowsDecoded <= info.height());
this->codec()->fillIncompleteImage(info, pixels, rowBytes, options.fZeroInitialized,
info.height(), rowsDecoded);
return incResult;
} else if (startResult != SkCodec::kUnimplemented) {
return startResult;
} // kUnimplemented means use the old method.
}
// Start the scanline decode.
SkCodec::Result result = this->codec()->startScanlineDecode(nativeInfo,
&sampledOptions);
if (SkCodec::kSuccess != result) {
return result;
}
SkSampler* sampler = this->codec()->getSampler(true);
if (!sampler) {
return SkCodec::kUnimplemented;
}
if (sampler->setSampleX(sampleX) != info.width()) {
return SkCodec::kInvalidScale;
}
if (get_scaled_dimension(subsetHeight, sampleY) != info.height()) {
return SkCodec::kInvalidScale;
}
switch(this->codec()->getScanlineOrder()) {
case SkCodec::kTopDown_SkScanlineOrder: {
if (!this->codec()->skipScanlines(startY)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes, options.fZeroInitialized,
dstHeight, 0);
return SkCodec::kIncompleteInput;
}
void* pixelPtr = pixels;
for (int y = 0; y < dstHeight; y++) {
if (1 != this->codec()->getScanlines(pixelPtr, 1, rowBytes)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes,
options.fZeroInitialized, dstHeight, y + 1);
return SkCodec::kIncompleteInput;
}
if (y < dstHeight - 1) {
if (!this->codec()->skipScanlines(sampleY - 1)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes,
options.fZeroInitialized, dstHeight, y + 1);
return SkCodec::kIncompleteInput;
}
}
pixelPtr = SkTAddOffset<void>(pixelPtr, rowBytes);
}
return SkCodec::kSuccess;
}
case SkCodec::kBottomUp_SkScanlineOrder: {
// Note that these modes do not support subsetting.
SkASSERT(0 == subsetY && nativeSize.height() == subsetHeight);
int y;
for (y = 0; y < nativeSize.height(); y++) {
int srcY = this->codec()->nextScanline();
if (is_coord_necessary(srcY, sampleY, dstHeight)) {
void* pixelPtr = SkTAddOffset<void>(pixels,
rowBytes * get_dst_coord(srcY, sampleY));
if (1 != this->codec()->getScanlines(pixelPtr, 1, rowBytes)) {
break;
}
} else {
if (!this->codec()->skipScanlines(1)) {
break;
}
}
}
if (nativeSize.height() == y) {
return SkCodec::kSuccess;
}
// We handle filling uninitialized memory here instead of using this->codec().
// this->codec() does not know that we are sampling.
const uint64_t fillValue = this->codec()->getFillValue(info);
const SkImageInfo fillInfo = info.makeWH(info.width(), 1);
for (; y < nativeSize.height(); y++) {
int srcY = this->codec()->outputScanline(y);
if (!is_coord_necessary(srcY, sampleY, dstHeight)) {
continue;
}
void* rowPtr = SkTAddOffset<void>(pixels, rowBytes * get_dst_coord(srcY, sampleY));
SkSampler::Fill(fillInfo, rowPtr, rowBytes, fillValue, options.fZeroInitialized);
}
return SkCodec::kIncompleteInput;
}
default:
SkASSERT(false);
return SkCodec::kUnimplemented;
}
}
SkCodec::Result SkScaledCodec::onGetPixels(const SkImageInfo& requestedInfo, void* dst,
size_t rowBytes, const Options& options,
SkPMColor ctable[], int* ctableCount,
int* rowsDecoded) {
if (options.fSubset) {
// Subsets are not supported.
return kUnimplemented;
}
if (fCodec->dimensionsSupported(requestedInfo.dimensions())) {
// Make sure that the parent class does not fill on an incomplete decode, since
// fCodec will take care of filling the uninitialized lines.
*rowsDecoded = requestedInfo.height();
return fCodec->getPixels(requestedInfo, dst, rowBytes, &options, ctable, ctableCount);
}
// scaling requested
int sampleX;
int sampleY;
if (!scaling_supported(requestedInfo.dimensions(), fCodec->getInfo().dimensions(),
&sampleX, &sampleY)) {
// onDimensionsSupported would have returned false, meaning we should never reach here.
SkASSERT(false);
return kInvalidScale;
}
// set first sample pixel in y direction
const int Y0 = get_start_coord(sampleY);
const int dstHeight = requestedInfo.height();
const int srcWidth = fCodec->getInfo().width();
const int srcHeight = fCodec->getInfo().height();
const SkImageInfo info = requestedInfo.makeWH(srcWidth, srcHeight);
Result result = fCodec->startScanlineDecode(info, &options, ctable, ctableCount);
if (kSuccess != result) {
return result;
}
SkSampler* sampler = fCodec->getSampler(true);
if (!sampler) {
return kUnimplemented;
}
if (sampler->setSampleX(sampleX) != requestedInfo.width()) {
return kInvalidScale;
}
switch(fCodec->getScanlineOrder()) {
case SkCodec::kTopDown_SkScanlineOrder: {
if (!fCodec->skipScanlines(Y0)) {
*rowsDecoded = 0;
return kIncompleteInput;
}
for (int y = 0; y < dstHeight; y++) {
if (1 != fCodec->getScanlines(dst, 1, rowBytes)) {
// The failed call to getScanlines() will take care of
// filling the failed row, so we indicate that we have
// decoded (y + 1) rows.
*rowsDecoded = y + 1;
return kIncompleteInput;
}
if (y < dstHeight - 1) {
if (!fCodec->skipScanlines(sampleY - 1)) {
*rowsDecoded = y + 1;
return kIncompleteInput;
}
}
dst = SkTAddOffset<void>(dst, rowBytes);
}
return kSuccess;
}
case SkCodec::kBottomUp_SkScanlineOrder:
case SkCodec::kOutOfOrder_SkScanlineOrder: {
Result result = kSuccess;
int y;
for (y = 0; y < srcHeight; y++) {
int srcY = fCodec->nextScanline();
if (is_coord_necessary(srcY, sampleY, dstHeight)) {
void* dstPtr = SkTAddOffset<void>(dst, rowBytes * get_dst_coord(srcY, sampleY));
if (1 != fCodec->getScanlines(dstPtr, 1, rowBytes)) {
result = kIncompleteInput;
break;
}
} else {
if (!fCodec->skipScanlines(1)) {
result = kIncompleteInput;
break;
}
}
}
// We handle filling uninitialized memory here instead of in the parent class.
// The parent class does not know that we are sampling.
if (kIncompleteInput == result) {
const uint32_t fillValue = fCodec->getFillValue(requestedInfo.colorType(),
requestedInfo.alphaType());
for (; y < srcHeight; y++) {
int srcY = fCodec->outputScanline(y);
if (is_coord_necessary(srcY, sampleY, dstHeight)) {
void* dstRow = SkTAddOffset<void>(dst,
rowBytes * get_dst_coord(srcY, sampleY));
SkSampler::Fill(requestedInfo.makeWH(requestedInfo.width(), 1), dstRow,
rowBytes, fillValue, options.fZeroInitialized);
}
}
*rowsDecoded = dstHeight;
}
return result;
}
case SkCodec::kNone_SkScanlineOrder: {
SkAutoMalloc storage(srcHeight * rowBytes);
uint8_t* storagePtr = static_cast<uint8_t*>(storage.get());
int scanlines = fCodec->getScanlines(storagePtr, srcHeight, rowBytes);
storagePtr += Y0 * rowBytes;
scanlines -= Y0;
int y = 0;
while (y < dstHeight && scanlines > 0) {
memcpy(dst, storagePtr, rowBytes);
storagePtr += sampleY * rowBytes;
dst = SkTAddOffset<void>(dst, rowBytes);
scanlines -= sampleY;
y++;
}
if (y < dstHeight) {
// fCodec has already handled filling uninitialized memory.
*rowsDecoded = dstHeight;
return kIncompleteInput;
}
return kSuccess;
}
default:
SkASSERT(false);
return kUnimplemented;
}
}
SkCodec::Result SkSampledCodec::sampledDecode(const SkImageInfo& info, void* pixels,
size_t rowBytes, const AndroidOptions& options) {
// We should only call this function when sampling.
SkASSERT(options.fSampleSize > 1);
// Create options struct for the codec.
SkCodec::Options sampledOptions;
sampledOptions.fZeroInitialized = options.fZeroInitialized;
// FIXME: This was already called by onGetAndroidPixels. Can we reduce that?
int sampleSize = options.fSampleSize;
int nativeSampleSize;
SkISize nativeSize = this->accountForNativeScaling(&sampleSize, &nativeSampleSize);
// Check if there is a subset.
SkIRect subset;
int subsetY = 0;
int subsetWidth = nativeSize.width();
int subsetHeight = nativeSize.height();
if (options.fSubset) {
// We will need to know about subsetting in the y-dimension in order to use the
// scanline decoder.
// Update the subset to account for scaling done by this->codec().
SkIRect* subsetPtr = options.fSubset;
// Do the divide ourselves, instead of calling get_scaled_dimension. If
// X and Y are 0, they should remain 0, rather than being upgraded to 1
// due to being smaller than the sampleSize.
const int subsetX = subsetPtr->x() / nativeSampleSize;
subsetY = subsetPtr->y() / nativeSampleSize;
subsetWidth = get_scaled_dimension(subsetPtr->width(), nativeSampleSize);
subsetHeight = get_scaled_dimension(subsetPtr->height(), nativeSampleSize);
// The scanline decoder only needs to be aware of subsetting in the x-dimension.
subset.setXYWH(subsetX, 0, subsetWidth, nativeSize.height());
sampledOptions.fSubset = ⊂
}
// Start the scanline decode.
SkCodec::Result result = this->codec()->startScanlineDecode(
info.makeWH(nativeSize.width(), nativeSize.height()), &sampledOptions,
options.fColorPtr, options.fColorCount);
if (SkCodec::kSuccess != result) {
return result;
}
SkSampler* sampler = this->codec()->getSampler(true);
if (!sampler) {
return SkCodec::kUnimplemented;
}
// Since we guarantee that output dimensions are always at least one (even if the sampleSize
// is greater than a given dimension), the input sampleSize is not always the sampleSize that
// we use in practice.
const int sampleX = subsetWidth / info.width();
const int sampleY = subsetHeight / info.height();
if (sampler->setSampleX(sampleX) != info.width()) {
return SkCodec::kInvalidScale;
}
if (get_scaled_dimension(subsetHeight, sampleY) != info.height()) {
return SkCodec::kInvalidScale;
}
const int samplingOffsetY = get_start_coord(sampleY);
const int startY = samplingOffsetY + subsetY;
int dstHeight = info.height();
switch(this->codec()->getScanlineOrder()) {
case SkCodec::kTopDown_SkScanlineOrder: {
if (!this->codec()->skipScanlines(startY)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes, options.fZeroInitialized,
dstHeight, 0);
return SkCodec::kIncompleteInput;
}
void* pixelPtr = pixels;
for (int y = 0; y < dstHeight; y++) {
if (1 != this->codec()->getScanlines(pixelPtr, 1, rowBytes)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes,
options.fZeroInitialized, dstHeight, y + 1);
return SkCodec::kIncompleteInput;
}
if (y < dstHeight - 1) {
if (!this->codec()->skipScanlines(sampleY - 1)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes,
options.fZeroInitialized, dstHeight, y + 1);
return SkCodec::kIncompleteInput;
}
}
pixelPtr = SkTAddOffset<void>(pixelPtr, rowBytes);
}
return SkCodec::kSuccess;
}
case SkCodec::kOutOfOrder_SkScanlineOrder:
case SkCodec::kBottomUp_SkScanlineOrder: {
// Note that these modes do not support subsetting.
SkASSERT(0 == subsetY && nativeSize.height() == subsetHeight);
int y;
for (y = 0; y < nativeSize.height(); y++) {
int srcY = this->codec()->nextScanline();
if (is_coord_necessary(srcY, sampleY, dstHeight)) {
void* pixelPtr = SkTAddOffset<void>(pixels,
rowBytes * get_dst_coord(srcY, sampleY));
if (1 != this->codec()->getScanlines(pixelPtr, 1, rowBytes)) {
break;
}
} else {
if (!this->codec()->skipScanlines(1)) {
break;
}
}
}
if (nativeSize.height() == y) {
return SkCodec::kSuccess;
}
// We handle filling uninitialized memory here instead of using this->codec().
// this->codec() does not know that we are sampling.
const uint32_t fillValue = this->codec()->getFillValue(info.colorType());
const SkImageInfo fillInfo = info.makeWH(info.width(), 1);
for (; y < nativeSize.height(); y++) {
int srcY = this->codec()->outputScanline(y);
if (!is_coord_necessary(srcY, sampleY, dstHeight)) {
continue;
}
void* rowPtr = SkTAddOffset<void>(pixels, rowBytes * get_dst_coord(srcY, sampleY));
SkSampler::Fill(fillInfo, rowPtr, rowBytes, fillValue, options.fZeroInitialized);
}
return SkCodec::kIncompleteInput;
}
case SkCodec::kNone_SkScanlineOrder: {
const int linesNeeded = subsetHeight - samplingOffsetY;
SkAutoTMalloc<uint8_t> storage(linesNeeded * rowBytes);
uint8_t* storagePtr = storage.get();
if (!this->codec()->skipScanlines(startY)) {
this->codec()->fillIncompleteImage(info, pixels, rowBytes, options.fZeroInitialized,
dstHeight, 0);
return SkCodec::kIncompleteInput;
}
int scanlines = this->codec()->getScanlines(storagePtr, linesNeeded, rowBytes);
for (int y = 0; y < dstHeight; y++) {
memcpy(pixels, storagePtr, info.minRowBytes());
storagePtr += sampleY * rowBytes;
pixels = SkTAddOffset<void>(pixels, rowBytes);
}
if (scanlines < dstHeight) {
// this->codec() has already handled filling uninitialized memory.
return SkCodec::kIncompleteInput;
}
return SkCodec::kSuccess;
}
default:
SkASSERT(false);
return SkCodec::kUnimplemented;
}
}