/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
watchdog_init();
watchdog_start();
init_lowlevel();
clock_init();
forwarding_enabled = get_forwarding_from_eeprom();
#if ANNOUNCE_BOOT
PRINTF("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
#endif
/* rtimers needed for radio cycling */
rtimer_init();
/* Initialize process subsystem */
process_init();
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
#if RF230BB || RF212BB
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
get_mac_from_eeprom(addr.u8);
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &addr.u8, 8);
#endif
#if RF230BB
rf230_set_pan_addr(
get_panid_from_eeprom(),
get_panaddr_from_eeprom(),
(uint8_t *)&addr.u8
);
rf230_set_channel(CHANNEL_802_15_4);
#elif RF212BB
rf212_set_pan_addr(
get_panid_from_eeprom(),
get_panaddr_from_eeprom(),
(uint8_t *)&addr.u8
);
#endif
extern uint16_t mac_dst_pan_id;
extern uint16_t mac_src_pan_id;
//set pan_id for frame creation
mac_dst_pan_id = get_panid_from_eeprom();
mac_src_pan_id = mac_dst_pan_id;
rimeaddr_set_node_addr(&addr);
PRINTFD("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#if ANNOUNCE_BOOT
#if RF230BB
PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name, rf230_get_channel());
#elif RF212BB
PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name, rf212_get_channel());
#endif /* RF230BB */
if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac
unsigned short tmp;
tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
NETSTACK_RDC.channel_check_interval());
if (tmp<65535) printf_P(PSTR(", check rate %u Hz"),tmp);
}
PRINTF("\n");
#if UIP_CONF_IPV6_RPL
PRINTF("RPL Enabled\n");
#endif
#if UIP_CONF_ROUTER
PRINTF("Routing Enabled\n");
#endif
#endif /* ANNOUNCE_BOOT */
// rime_init(rime_udp_init(NULL));
// uip_router_register(&rimeroute);
process_start(&tcpip_process, NULL);
#else
/* Original RF230 combined mac/radio driver */
/* mac process must be started before tcpip process! */
process_start(&mac_process, NULL);
process_start(&tcpip_process, NULL);
#endif /*RF230BB || RF212BB*/
#if WEBSERVER
process_start(&webserver_nogui_process, NULL);
#endif
/* Handler for HEXABUS UDP Packets */
process_start(&udp_handler_process, NULL);
mdns_responder_init();
/* Button Process */
process_start(&button_pressed_process, NULL);
/* Init Metering */
metering_init();
/*Init Relay */
relay_init();
/* Autostart other processes */
autostart_start(autostart_processes);
/*---If using coffee file system create initial web content if necessary---*/
#if COFFEE_FILES
int fa = cfs_open( "/index.html", CFS_READ);
if (fa<0) { //Make some default web content
PRINTF("No index.html file found, creating upload.html!\n");
PRINTF("Formatting FLASH file system for coffee...");
cfs_coffee_format();
PRINTF("Done!\n");
fa = cfs_open( "/index.html", CFS_WRITE);
int r = cfs_write(fa, &"It works!", 9);
if (r<0) PRINTF("Can''t create /index.html!\n");
cfs_close(fa);
// fa = cfs_open("upload.html"), CFW_WRITE);
// <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html>
}
#endif /* COFFEE_FILES */
/* Add addresses for testing */
#if 0
{
uip_ip6addr_t ipaddr;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
// uip_ds6_prefix_add(&ipaddr,64,0);
}
#endif
/*--------------------------Announce the configuration---------------------*/
#if ANNOUNCE_BOOT
#if WEBSERVER
uint8_t i;
char buf[80];
unsigned int size;
for (i=0;i<UIP_DS6_ADDR_NB;i++) {
if (uip_ds6_if.addr_list[i].isused) {
httpd_cgi_sprint_ip6(uip_ds6_if.addr_list[i].ipaddr,buf);
PRINTF("IPv6 Address: %s\n",buf);
}
}
eeprom_read_block(buf, (const void*) EE_DOMAIN_NAME, EE_DOMAIN_NAME_SIZE);
buf[EE_DOMAIN_NAME_SIZE] = 0;
size=httpd_fs_get_size();
#ifndef COFFEE_FILES
PRINTF(".%s online with fixed %u byte web content\n",buf,size);
#elif COFFEE_FILES==1
PRINTF(".%s online with static %u byte EEPROM file system\n",buf,size);
#elif COFFEE_FILES==2
PRINTF(".%s online with dynamic %u KB EEPROM file system\n",buf,size>>10);
#elif COFFEE_FILES==3
PRINTF(".%s online with static %u byte program memory file system\n",buf,size);
#elif COFFEE_FILES==4
PRINTF(".%s online with dynamic %u KB program memory file system\n",buf,size>>10);
#endif /* COFFEE_FILES */
#else
PRINTF("Online\n");
#endif /* WEBSERVER */
#endif /* ANNOUNCE_BOOT */
}
/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
watchdog_init();
watchdog_start();
#ifdef RAVEN_LCD_INTERFACE
/* First rs232 port for Raven 3290 port */
rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Set input handler for 3290 port */
rs232_set_input(0,raven_lcd_serial_input);
#endif
/* Second rs232 port for debugging */
rs232_init(RS232_PORT_1, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to second port */
rs232_redirect_stdout(RS232_PORT_1);
clock_init();
#if STACKMONITOR
/* Simple stack pointer highwater monitor. Checks for magic numbers in the main
* loop. In conjuction with TESTRTIMER, never-used stack will be printed
* every STACKMONITOR seconds.
*/
{
extern uint16_t __bss_end;
uint16_t p=(uint16_t)&__bss_end;
do {
*(uint16_t *)p = 0x4242;
p+=10;
} while (p<SP-10); //don't overwrite our own stack
}
#endif
#define CONF_CALIBRATE_OSCCAL 0
#if CONF_CALIBRATE_OSCCAL
{
extern uint8_t osccal_calibrated;
uint8_t i;
PRINTF("\nBefore calibration OSCCAL=%x\n",OSCCAL);
for (i=0;i<10;i++) {
calibrate_rc_osc_32k();
PRINTF("Calibrated=%x\n",osccal_calibrated);
//#include <util/delay_basic.h>
//#define delay_us( us ) ( _delay_loop_2(1+(us*F_CPU)/4000000UL) )
// delay_us(50000);
}
clock_init();
}
#endif
#if ANNOUNCE_BOOT
PRINTF("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
#endif
/* rtimers needed for radio cycling */
rtimer_init();
/* Initialize process subsystem */
process_init();
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
#if RF230BB
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
get_mac_from_eeprom(addr.u8);
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &addr.u8, 8);
#endif
rf230_set_pan_addr(
get_panid_from_eeprom(),
get_panaddr_from_eeprom(),
(uint8_t *)&addr.u8
);
rf230_set_channel(get_channel_from_eeprom());
rimeaddr_set_node_addr(&addr);
PRINTFD("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#if ANNOUNCE_BOOT
PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac
unsigned short tmp;
tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
NETSTACK_RDC.channel_check_interval());
if (tmp<65535) printf_P(PSTR(", check rate %u Hz"),tmp);
}
PRINTF("\n");
#if UIP_CONF_IPV6_RPL
PRINTF("RPL Enabled\n");
#endif
#if UIP_CONF_ROUTER
PRINTF("Routing Enabled\n");
#endif
#endif /* ANNOUNCE_BOOT */
// rime_init(rime_udp_init(NULL));
// uip_router_register(&rimeroute);
process_start(&tcpip_process, NULL);
#else
/* Original RF230 combined mac/radio driver */
/* mac process must be started before tcpip process! */
process_start(&mac_process, NULL);
process_start(&tcpip_process, NULL);
#endif /*RF230BB*/
#ifdef RAVEN_LCD_INTERFACE
process_start(&raven_lcd_process, NULL);
#endif
/* Autostart other processes */
autostart_start(autostart_processes);
//Give ourselves a prefix
// init_net();
/*---If using coffee file system create initial web content if necessary---*/
#if COFFEE_FILES
int fa = cfs_open( "/index.html", CFS_READ);
if (fa<0) { //Make some default web content
PRINTF("No index.html file found, creating upload.html!\n");
PRINTF("Formatting FLASH file system for coffee...");
cfs_coffee_format();
PRINTF("Done!\n");
fa = cfs_open( "/index.html", CFS_WRITE);
int r = cfs_write(fa, &"It works!", 9);
if (r<0) PRINTF("Can''t create /index.html!\n");
cfs_close(fa);
// fa = cfs_open("upload.html"), CFW_WRITE);
// <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html>
}
#endif /* COFFEE_FILES */
/* Add addresses for testing */
#if 0
{
uip_ip6addr_t ipaddr;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
// uip_ds6_prefix_add(&ipaddr,64,0);
}
#endif
/*--------------------------Announce the configuration---------------------*/
#if ANNOUNCE_BOOT
#if AVR_WEBSERVER
uint8_t i;
char buf[80];
unsigned int size;
for (i=0;i<UIP_DS6_ADDR_NB;i++) {
if (uip_ds6_if.addr_list[i].isused) {
httpd_cgi_sprint_ip6(uip_ds6_if.addr_list[i].ipaddr,buf);
PRINTF("IPv6 Address: %s\n",buf);
}
}
eeprom_read_block (buf,server_name, sizeof(server_name));
buf[sizeof(server_name)]=0;
PRINTF("%s",buf);
eeprom_read_block (buf,domain_name, sizeof(domain_name));
buf[sizeof(domain_name)]=0;
size=httpd_fs_get_size();
#ifndef COFFEE_FILES
PRINTF(".%s online with fixed %u byte web content\n",buf,size);
#elif COFFEE_FILES==1
PRINTF(".%s online with static %u byte EEPROM file system\n",buf,size);
#elif COFFEE_FILES==2
PRINTF(".%s online with dynamic %u KB EEPROM file system\n",buf,size>>10);
#elif COFFEE_FILES==3
PRINTF(".%s online with static %u byte program memory file system\n",buf,size);
#elif COFFEE_FILES==4
PRINTF(".%s online with dynamic %u KB program memory file system\n",buf,size>>10);
#endif /* COFFEE_FILES */
#else
PRINTF("Online\n");
#endif /* AVR_WEBSERVER */
#endif /* ANNOUNCE_BOOT */
}
/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
#if WITH_SLIP
//Slip border router on uart0
rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
#else
/* First rs232 port for debugging */
rs232_init(RS232_PORT_0, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to first port */
rs232_redirect_stdout(RS232_PORT_0);
/* Get input from first port */
rs232_set_input(RS232_PORT_0, serial_line_input_byte);
#endif
clock_init();
if(MCUSR & (1<<PORF )) PRINTA("Power-on reset.\n");
if(MCUSR & (1<<EXTRF)) PRINTA("External reset!\n");
if(MCUSR & (1<<BORF )) PRINTA("Brownout reset!\n");
if(MCUSR & (1<<WDRF )) PRINTA("Watchdog reset!\n");
if(MCUSR & (1<<JTRF )) PRINTA("JTAG reset!\n");
#if ANNOUNCE_BOOT
PRINTA("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
#endif
/* Initialize process subsystem */
process_init();
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
/* Initilaize serial line for input */
serial_line_init();
/* Initialize board LEDs */
leds_init();
/* When used for testing, we should start with them off */
leds_off(LEDS_GREEN|LEDS_YELLOW);
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
get_mac_from_eeprom(addr.u8);
memcpy(&uip_lladdr.addr, &addr.u8, 8);
// Is this required with IPv6, I wonder?
#if 1
rf230_set_pan_addr(
IEEE802154_PANID,
0,
(uint8_t *)&addr.u8
);
rf230_set_channel(26);
rimeaddr_set_node_addr(&addr);
#endif
PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#if ANNOUNCE_BOOT
PRINTA("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
if (NETSTACK_RDC.channel_check_interval) //function pointer is zero for sicslowmac
{
unsigned short tmp;
tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
NETSTACK_RDC.channel_check_interval());
if (tmp<65535) PRINTA(", check rate %u Hz",tmp);
}
PRINTA("\n");
#endif
#if UIP_CONF_ROUTER
//#warning Zigduino has not been tested with UIP_CONF_ROUTER
#if ANNOUNCE_BOOT
PRINTA("Routing Enabled\n");
#endif
#endif
/* Sensors process means all processes will get an event posted whenever sensors change.
Not always desired, so may want to put this on a compile switch. */
process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);
process_start(&tcpip_process, NULL);
//Give ourselves a prefix
// init_net();
/* Add easy addresses for testing */
uip_ip6addr_t ipaddr;
uip_ip6addr(&ipaddr, 0xfe80, 0, 0, 0, 0, 0, 0, addr.u8[7]);
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
#if UIP_CONF_ROUTER
uip_ds6_prefix_add(&ipaddr,64,0,0,0,0);
#else
uip_ds6_prefix_add(&ipaddr,64,0);
#endif
/* Create a route through the border router for site-local addresses, fec0::/64. */
uip_ds6_route_t *rep;
uip_ip6addr_t next_hop;
uip_ip6addr(&ipaddr, 0xfec0, 0, 0, 0, 0, 0, 0, 0);
uip_ip6addr(&next_hop, 0xaaaa, 0, 0, 0, 0, 0, 0, 1);
if((rep = uip_ds6_route_add(&ipaddr, 64, &next_hop, 0)) == NULL)
{
printf("*** Failed to add a route to fec0::/64\n");
}
printf("Autostart other processes\n");
/* Autostart other processes */
autostart_start(autostart_processes);
/*--------------------------Announce the configuration---------------------*/
#if ANNOUNCE_BOOT
extern uip_ds6_netif_t uip_ds6_if;
uint8_t i;
PRINTA("\nIP addresses [%u max]\n",UIP_DS6_ADDR_NB);
for (i=0; i<UIP_DS6_ADDR_NB; i++)
{
if (uip_ds6_if.addr_list[i].isused)
{
uip_debug_ipaddr_print(&uip_ds6_if.addr_list[i].ipaddr);
PRINTA("\n");
}
}
#endif /* ANNOUNCE_BOOT */
}
