void
newbaseline (
char *buf /* whatever followed "x X NewBaseline" */
)
{
char *p; /* for eliminating white space etc. */
/*
*
* Called from devcntrl() whenever an "x X NewBaseline" command is recognized. We
* assume whatever is in *buf is a set of parametric equations that describe the
* new baseline. Equations for x(t), y(t), dx/dt, and dy/dt must be written in
* PostScript, bracketed by { and } characters, and supplied in exactly that order.
* In particular the equation for x must come first in *buf and it ends up as the
* last one on the stack, while the equation for dy/dt comes last (in *buf) and
* ends up on the top of the PostScript stack. For example if *buf is given by,
*
* {} {180 mul 3.1416 div cos} {pop 1} {180 mul 3.1416 div sin neg}
*
* text will be printed along the curve y = cos(x).
*
* Angles given in radians must be converted to degrees for the PostScript trig
* functions, and things are scaled so that 1 unit maps into 1 inch. In the last
* example the cosine curve that describes the baseline has an amplitude of 1 inch.
* As another example of this rather confusing syntax if *buf is,
*
* {} {} {pop 1} {pop 1}
*
* the baseline will be the 45 degree line y = x.
*
* When any of the four functions is used they're called with a single number on
* the stack that's equal to the current value of the parameter t. The coordinate
* system axes run parallel to the PostScript coordinate system that's currently
* being used.
*
*/
for ( p = buf; *p; p++ ) /* eliminate trailing '\n' */
if ( *p == '\n' ) {
*p = '\0';
break;
} /* End if */
for ( p = buf; *p && (*p == ' ' || *p == ':'); p++ ) ;
if ( *p != '\0' ) { /* something's there */
endtext();
getbaseline();
fprintf(tf, "mark resolution %s newbaseline\n", p);
t_sf(1);
resetpos();
} /* End if */
} /* End of newbaseline */
void
settext(char *buf)
{
char *p;
/*
*
* Does whatever is needed to ensure any text that follows will be set along the
* curve described by the PostScript procedures listed in *buf. If *buf doesn't
* contain anything useful (eg. just a newline) things are restored to whatever
* they originally were. Doesn't work well if we try to start in the middle of a
* line of text.
*
* The parametric equations needed are,
*
* x = f(t)
* y = g(t)
* dx/dt = f'(t)
* dy/dt = g'(t)
*
* and must be given as proper PostScript procedures. The equation for x must come
* first (ie. it ends up on the bottom of the stack) and the equation for dy/dt
* must be given last (ie. it ends up on top of the stack). For example if *buf
* is given by,
*
* {} {180 mul 3.1416 div cos} {pop 1} {180 mul 3.1416 div sin neg}
*
* text will be set along the curve y=cos(x).
*
*/
endtext();
getbaseline();
for ( p = buf; *p && *p == ' '; p++ ) ;
if ( *p && *p != '\n' ) {
encoding = maxencoding + 2;
fprintf(tf, "mark resolution %s newbaseline\n", buf);
} else encoding = realencoding;
fprintf(tf, "%d setdecoding\n", encoding);
resetpos();
} /* End of settext */
void
drawtext (
char *buf /* whatever followed "x X DrawText */
)
{
char *p; /* for eliminating white space etc. */
/*
*
* Called from devcntrl() whenever an "x X DrawText command is recognized. *buf
* should contain three arguments in the following order. First comes the text we
* want to print along the current baseline. Right now the string should be given
* as a PostScript string using characters '(' and ')' as the delimiters. Next in
* *buf comes a justification mode that can be the words left, right, or center.
* Last comes a number that represents the starting value of the parameter t that's
* given as the argument to the parametric equations that describe the current
* baseline. For example if *buf is given by,
*
* (hello world) left .5
*
* hello world will be printed along the path described by the current baseline
* and left justified at whatever (x(.5), y(.5)) happens to be. Usually will be
* preceeded by an "x X NewBaseline" call that defines the current baseline. The
* origin of the coordinate system used by the parametric equations will be the
* current point.
*
*/
for ( p = buf; *p; p++ ) /* eliminate trailing '\n' */
if ( *p == '\n' ) {
*p = '\0';
break;
} /* End if */
for ( p = buf; *p && (*p == ' ' || *p == ':'); p++ ) ;
if ( *p != '\0' ) { /* something's there */
endtext();
getbaseline();
xymove(hpos, vpos);
fprintf(tf, "mark %s drawfunnytext\n", p);
resetpos();
} /* End if */
} /* End of drawtext */
int extractFoldData(fitsfile *fp,dSet *data,float dm,float *fx,float *fy,float *freq_y,float *time_y,float *bpass, int sub0)
{
int n=0;
int status=0;
int colnum;
int i,j,k,l;
int initflag=0;
float nval=0;
float ty[data->phead.nbin];
float **offs; // [data->phead.nsub];
float **dat_scl; // [data->phead.nsub];
double f0,chanbw,tdelay;
int bn,cdelay;
double bintime;
int addDelay = 0; //500;
// float bpass[data->phead.nchan*2];
float bpass_offs[2];
float bpass_scl[2];
float meanVal,rmsVal;
// get mean/RMS of off-pulse for scaling. no longer need OFFS/DAT_SCL
printf("sub0 = %d\n",sub0);
if (dm < 0)
dm = data->phead.dm;
// Need to remove a baseline from each polarisation channel before summing
// Get first frequency channel
// Central frequency
f0 = data->phead.freq; //-data->phead.chanbw*data->phead.nchan/2;
// chanbw = data->phead.bw/data->phead.nchan;
chanbw = data->phead.chanbw;
bintime = (double)data->phead.period/(double)data->phead.nbin;
fits_movnam_hdu(fp,BINARY_TBL,"BANDPASS",1,&status);
if (status) {
printf("Unable to move to bandpass table in FITS file\n");
exit(1);
}
fits_get_colnum(fp,CASEINSEN,"DAT_OFFS",&colnum,&status);
fits_read_col_flt(fp,colnum,1,1,2,nval,bpass_offs,&initflag,&status);
fits_get_colnum(fp,CASEINSEN,"DAT_SCL",&colnum,&status);
fits_read_col_flt(fp,colnum,1,1,2,nval,bpass_scl,&initflag,&status);
// Now read the bandpass
fits_get_colnum(fp,CASEINSEN,"DATA",&colnum,&status);
// NOTE: Starting at element 2 as element 1 is junk
fits_read_col_flt(fp,colnum,1,2,data->phead.nchan,nval,bpass,&initflag,&status);
fits_read_col_flt(fp,colnum,1,3+data->phead.nchan,data->phead.nchan,nval,bpass+data->phead.nchan,&initflag,&status);
for (i=0;i<data->phead.nchan*2;i++)
{
if (i<data->phead.nchan)
bpass[i] = bpass[i]*bpass_scl[0] + bpass_offs[0];
else
bpass[i] = bpass[i]*bpass_scl[1] + bpass_offs[1];
// printf("bpass: %d %g %g %g %g %g \n",i,bpass[i],bpass_scl[0],bpass_scl[1],bpass_offs[0],bpass_offs[1]);
}
// exit(1);
fits_movnam_hdu(fp,BINARY_TBL,"SUBINT",1,&status);
if (status) {
printf("Unable to move to subint table in FITS file\n");
exit(1);
}
// REMOVED: No longer need dat_scl or offs. OFFS/DAT_SCL
// offs = (float **)malloc(sizeof(float *)*data->phead.nsub);
// dat_scl = (float **)malloc(sizeof(float *)*data->phead.nsub);
// for (i=0;i<data->phead.nsub;i++)
// {
// offs[i] = (float *)malloc(sizeof(float)*data->phead.nchan*data->phead.npol);
// dat_scl[i] = (float *)malloc(sizeof(float)*data->phead.nchan*data->phead.npol);
// }
// fits_get_colnum(fp,CASEINSEN,"DAT_OFFS",&colnum,&status);
// if (status) {
// printf("Unable to find DAT_OFFS in the subint table in FITS file\n");
// exit(1);
// }
// for (i=0;i<data->phead.nsub;i++)
// {
// fits_read_col_flt(fp,colnum,i+1,1,data->phead.nchan*data->phead.npol,nval,offs[i],&initflag,&status);
// // printf("offs = %g\n",offs[i][5]);
// // offs[i] =0;
// }
//
// fits_get_colnum(fp,CASEINSEN,"DAT_SCL",&colnum,&status);
// if (status) {
// printf("Unable to find DAT_SCL in the subint table in FITS file\n");
// exit(1);
// }
// for (i=0;i<data->phead.nsub;i++)
// {
// fits_read_col_flt(fp,colnum,i+1,1,data->phead.nchan*data->phead.npol,nval,dat_scl[i],&initflag,&status);
// // printf("dat_scl = %g\n",dat_scl[i][5]);
// // dat_scl[i]=1.0;
// }
fits_get_colnum(fp,CASEINSEN,"DATA",&colnum,&status);
if (status) {
printf("Unable to find data in the subint table in FITS file\n");
exit(1);
}
if (sub0==0)
{
for (i=0;i<data->phead.nbin;i++)
{
fx[i] = i;
fy[i] = 0;
}
//
printf("Loading %d subintegrations\n",data->phead.nsub);
printf("Number of frequency channels = %d\n",data->phead.nchan);
printf("Number of polarisations = %d\n",data->phead.npol);
for (i=0;i<data->phead.nchan*data->phead.nbin;i++)
freq_y[i] = 0;
}
for (i=sub0;i<data->phead.nsub;i++) // *data->phead.nbin;i++)
{
for (j=0;j<data->phead.nbin;j++)
time_y[i*data->phead.nbin+j] = 0;
}
for (l=sub0;l<data->phead.nsub;l++)
{
for (j=0;j<data->phead.npol && j < 2;j++) // Do not add cross terms!
{
for (i=0;i<data->phead.nchan;i++)
{
// Must calculate the frequency of this channel
// ... calculate the delay caused by the DM
// ... dedisperse the subintegration
// tdelay = 4.15e-3*dm*(pow(f0/1000.0,-2)-pow((f0+chanbw*i)/1000.0,-2));
tdelay = 4.15e-3*dm*(pow(f0/1000.0,-2)-pow((f0+(chanbw*i-chanbw*data->phead.nchan/2.0))/1000.0,-2));
cdelay = nint(-tdelay/bintime);
// if (l==0 && j==0)
// printf("Have %g %g %g %d %d\n",dm,f0,f0+chanbw*i,i,cdelay);
fits_read_col_flt(fp,colnum,l+1,j*(data->phead.nchan*data->phead.nbin)+i*data->phead.nbin+1,data->phead.nbin,nval,ty,&initflag,&status);
meanVal=0;
//for (k=0;k<data->phead.nbin;k++)
//{
// ty[k] = ((ty[k]+offs[l][j*data->phead.nchan+i])*dat_scl[l][j*data->phead.nchan+i]); //+offs[l][j*data->phead.nchan+i]);
/* if (j==0)
ty[k] -= bpass[i];
else if (j==1)
ty[k] -= bpass[data->phead.nchan+i];
else
{
ty[k] -= sqrt(bpass[data->phead.nchan+i]*bpass[i]);
} */
//meanVal+=ty[k];
// }
getbaseline(ty,data->phead.nbin,0.35,&meanVal,&rmsVal);
if (rmsVal == 0.0 ) rmsVal=1.0;
// printf("Val = %g\n",ty[10]);
for (k=0;k<data->phead.nbin;k++)
{
// if (i==10 && l==10)
// printf("Orig value = %g\n",ty[k]);
//ty[k] = ((ty[k]+offs[l][j*data->phead.nchan+i])*dat_scl[l][j*data->phead.nchan+i]); //+offs[l][j*data->phead.nchan+i]);
ty[k] -= meanVal;
ty[k] /= rmsVal;
// Subtract bandpass
/* if (j==0)
ty[k] -= bpass[i];
else if (j==1)
ty[k] -= bpass[data->phead.nchan+i];
else
{
ty[k] -= sqrt(bpass[data->phead.nchan+i]*bpass[i]);
} */
// if (l==10)
// printf("New value = %g\n",ty[k]);
bn = k-cdelay + addDelay;
// bn = nint(fmod(k-tdelay/bintime,data->phead.nbin));
while (bn >= data->phead.nbin)
bn -= data->phead.nbin;
while (bn < 0)
bn += data->phead.nbin;
freq_y[i*data->phead.nbin+k]+=(ty[k]); ///(float)(data->phead.npol*data->phead.nsub));
time_y[l*data->phead.nbin+bn]+=(ty[k]);///(float)(data->phead.npol*data->phead.nchan));
// printf("timey = %g\n",time_y[l*data->phead.nbin+bn]);
fy[bn]+=(ty[k]/(float)(data->phead.nchan*data->phead.npol*data->phead.nsub));
}
}
}
}
// REMOVED: OFFS/DAT_SCL table no longer needed.
//for (i=0;i<data->phead.nsub;i++)
// {
// free(offs[i]);
// free(dat_scl[i]);
// }
//free(offs);
//free(dat_scl);*/
printf("Status = %d\n",status);
}