int
im__find_tboverlap( IMAGE *ref_in, IMAGE *sec_in, IMAGE *out,
int bandno_in,
int xref, int yref, int xsec, int ysec,
int halfcorrelation, int halfarea,
int *dx0, int *dy0,
double *scale1, double *angle1, double *dx1, double *dy1 )
{
IMAGE *ref, *sec;
TIE_POINTS points, *p_points; /* defined in mosaic.h */
TIE_POINTS newpoints, *p_newpoints;
int i;
int dx, dy;
Rect top, bottom, overlap;
/* Check ref and sec are compatible.
*/
if( ref_in->Bands != sec_in->Bands ||
ref_in->BandFmt != sec_in->BandFmt ||
ref_in->Coding != sec_in->Coding ) {
im_errormsg( "im_tbmosaic: input images incompatible" );
return( -1 );
}
/* Test cor and area.
*/
if( halfcorrelation < 0 || halfarea < 0 ||
halfarea < halfcorrelation ) {
im_errormsg( "im_tbmosaic: bad area parameters" );
return( -1 );
}
/* Set positions of top and bottom.
*/
top.left = 0;
top.top = 0;
top.width = ref_in->Xsize;
top.height = ref_in->Ysize;
bottom.left = xref - xsec;
bottom.top = yref - ysec;
bottom.width = sec_in->Xsize;
bottom.height = sec_in->Ysize;
/* Find overlap.
*/
im_rect_intersectrect( &top, &bottom, &overlap );
if( overlap.width < 2*halfarea + 1 ||
overlap.height < 2*halfarea + 1 ) {
im_errormsg( "im_tbmosaic: overlap too small for search" );
return( -1 );
}
/* Extract overlaps.
*/
ref = im_open_local( out, "temp_one", "t" );
sec = im_open_local( out, "temp_two", "t" );
if( !ref || !sec )
return( -1 );
if( ref_in->Coding == IM_CODING_LABQ ) {
IMAGE *t1 = im_open_local( out, "temp:3", "p" );
IMAGE *t2 = im_open_local( out, "temp:4", "p" );
IMAGE *t3 = im_open_local( out, "temp:5", "p" );
IMAGE *t4 = im_open_local( out, "temp:6", "p" );
IMAGE *t5 = im_open_local( out, "temp:7", "p" );
IMAGE *t6 = im_open_local( out, "temp:8", "p" );
if( !t1 || !t2 || !t3 || !t4 || !t5 || !t6 )
return( -1 );
if( im_extract_area( ref_in, t1,
overlap.left, overlap.top,
overlap.width, overlap.height ) )
return( -1 );
if( im_extract_area( sec_in, t2,
overlap.left - bottom.left, overlap.top - bottom.top,
overlap.width, overlap.height ) )
return( -1 );
if( im_LabQ2Lab( t1, t3 ) || im_LabQ2Lab( t2, t4 ) ||
im_Lab2disp( t3, t5, im_col_displays( 1 ) ) ||
im_Lab2disp( t4, t6, im_col_displays( 1 ) ) )
return( -1 );
/* Extract the green.
*/
if( im_extract_band( t5, ref, 1 ) ||
im_extract_band( t6, sec, 1 ) )
return( -1 );
}
else if( ref_in->Coding == IM_CODING_NONE ) {
IMAGE *t1 = im_open_local( out, "temp:9", "p" );
IMAGE *t2 = im_open_local( out, "temp:10", "p" );
IMAGE *t3 = im_open_local( out, "temp:11", "p" );
IMAGE *t4 = im_open_local( out, "temp:12", "p" );
if( !t1 || !t2 || !t3 || !t4 )
return( -1 );
if( im_extract_area( ref_in, t1,
overlap.left, overlap.top,
overlap.width, overlap.height ) )
return( -1 );
if( im_extract_area( sec_in, t2,
overlap.left - bottom.left, overlap.top - bottom.top,
overlap.width, overlap.height ) )
return( -1 );
if( im_extract_band( t1, t3, bandno_in ) ||
im_extract_band( t2, t4, bandno_in ) )
return( -1 );
if( im_scale( t3, ref ) ||
im_scale( t4, sec ) )
return( -1 );
}
else {
im_errormsg( "im_tbmosaic: unknown Coding type" );
return( -1 );
}
/* Initialise and fill TIE_POINTS
*/
p_points = &points;
p_newpoints = &newpoints;
p_points->reference = ref_in->filename;
p_points->secondary = sec_in->filename;
p_points->nopoints = IM_MAXPOINTS;
p_points->deltax = 0;
p_points->deltay = 0;
p_points->halfcorsize = halfcorrelation;
p_points->halfareasize = halfarea;
/* Initialise the structure
*/
for( i = 0; i < IM_MAXPOINTS; i++ ) {
p_points->x_reference[i] = 0;
p_points->y_reference[i] = 0;
p_points->x_secondary[i] = 0;
p_points->y_secondary[i] = 0;
p_points->contrast[i] = 0;
p_points->correlation[i] = 0.0;
p_points->dx[i] = 0.0;
p_points->dy[i] = 0.0;
p_points->deviation[i] = 0.0;
}
/* Search ref for possible tie-points. Sets: p_points->contrast,
* p_points->x,y_reference.
*/
if( im__tbcalcon( ref, p_points ) )
return( -1 );
/* For each candidate point, correlate against corresponding part of
* sec. Sets x,y_secondary and fills correlation and dx, dy.
*/
if( im__chkpair( ref, sec, p_points ) )
return( -1 );
/* First call to im_clinear().
*/
if( im__initialize( p_points ) )
return( -1 );
/* Improve the selection of tiepoints until all abs(deviations) are
* < 1.0 by deleting all wrong points.
*/
if( im__improve( p_points, p_newpoints ) )
return( -1 );
/* Average remaining offsets.
*/
if( im__avgdxdy( p_newpoints, &dx, &dy ) )
return( -1 );
/* Offset with overlap position.
*/
*dx0 = -bottom.left + dx;
*dy0 = -bottom.top + dy;
/* Write 1st order parameters too.
*/
*scale1 = newpoints.l_scale;
*angle1 = newpoints.l_angle;
*dx1 = newpoints.l_deltax;
*dy1 = newpoints.l_deltay;
return( 0 );
}
int
im__find_tboverlap( IMAGE *ref_in, IMAGE *sec_in, IMAGE *out,
int bandno_in,
int xref, int yref, int xsec, int ysec,
int halfcorrelation, int halfarea,
int *dx0, int *dy0,
double *scale1, double *angle1, double *dx1, double *dy1 )
{
Rect top, bottom, overlap;
IMAGE *ref, *sec;
IMAGE *t[6];
TIE_POINTS points, *p_points; /* defined in mosaic.h */
TIE_POINTS newpoints, *p_newpoints;
int i;
int dx, dy;
/* Test cor and area.
*/
if( halfcorrelation < 0 || halfarea < 0 ||
halfarea < halfcorrelation ) {
im_error( "im_tbmosaic", "%s", _( "bad area parameters" ) );
return( -1 );
}
/* Set positions of top and bottom.
*/
top.left = 0;
top.top = 0;
top.width = ref_in->Xsize;
top.height = ref_in->Ysize;
bottom.left = xref - xsec;
bottom.top = yref - ysec;
bottom.width = sec_in->Xsize;
bottom.height = sec_in->Ysize;
/* Find overlap.
*/
im_rect_intersectrect( &top, &bottom, &overlap );
if( overlap.width < 2 * halfarea + 1 ||
overlap.height < 2 * halfarea + 1 ) {
im_error( "im_tbmosaic", "%s",
_( "overlap too small for search" ) );
return( -1 );
}
/* Extract overlaps as 8-bit, 1 band.
*/
if( !(ref = im_open_local( out, "temp_one", "t" )) ||
!(sec = im_open_local( out, "temp_two", "t" )) ||
im_open_local_array( out, t, 6, "im_tbmosaic", "p" ) ||
im_extract_area( ref_in, t[0],
overlap.left, overlap.top,
overlap.width, overlap.height ) ||
im_extract_area( sec_in, t[1],
overlap.left - bottom.left, overlap.top - bottom.top,
overlap.width, overlap.height ) )
return( -1 );
if( ref_in->Coding == IM_CODING_LABQ ) {
if( im_LabQ2Lab( t[0], t[2] ) ||
im_LabQ2Lab( t[1], t[3] ) ||
im_Lab2disp( t[2], t[4], im_col_displays( 1 ) ) ||
im_Lab2disp( t[3], t[5], im_col_displays( 1 ) ) ||
im_extract_band( t[4], ref, 1 ) ||
im_extract_band( t[5], sec, 1 ) )
return( -1 );
}
else if( ref_in->Coding == IM_CODING_NONE ) {
if( im_extract_band( t[0], t[2], bandno_in ) ||
im_extract_band( t[1], t[3], bandno_in ) ||
im_scale( t[2], ref ) ||
im_scale( t[3], sec ) )
return( -1 );
}
else {
im_error( "im_tbmosaic", "%s", _( "unknown Coding type" ) );
return( -1 );
}
/* Initialise and fill TIE_POINTS
*/
p_points = &points;
p_newpoints = &newpoints;
p_points->reference = ref_in->filename;
p_points->secondary = sec_in->filename;
p_points->nopoints = IM_MAXPOINTS;
p_points->deltax = 0;
p_points->deltay = 0;
p_points->halfcorsize = halfcorrelation;
p_points->halfareasize = halfarea;
/* Initialise the structure
*/
for( i = 0; i < IM_MAXPOINTS; i++ ) {
p_points->x_reference[i] = 0;
p_points->y_reference[i] = 0;
p_points->x_secondary[i] = 0;
p_points->y_secondary[i] = 0;
p_points->contrast[i] = 0;
p_points->correlation[i] = 0.0;
p_points->dx[i] = 0.0;
p_points->dy[i] = 0.0;
p_points->deviation[i] = 0.0;
}
/* Search ref for possible tie-points. Sets: p_points->contrast,
* p_points->x,y_reference.
*/
if( im__tbcalcon( ref, p_points ) )
return( -1 );
/* For each candidate point, correlate against corresponding part of
* sec. Sets x,y_secondary and fills correlation and dx, dy.
*/
if( im__chkpair( ref, sec, p_points ) )
return( -1 );
/* First call to im_clinear().
*/
if( im__initialize( p_points ) )
return( -1 );
/* Improve the selection of tiepoints until all abs(deviations) are
* < 1.0 by deleting all wrong points.
*/
if( im__improve( p_points, p_newpoints ) )
return( -1 );
/* Average remaining offsets.
*/
if( im__avgdxdy( p_newpoints, &dx, &dy ) )
return( -1 );
/* Offset with overlap position.
*/
*dx0 = -bottom.left + dx;
*dy0 = -bottom.top + dy;
/* Write 1st order parameters too.
*/
*scale1 = newpoints.l_scale;
*angle1 = newpoints.l_angle;
*dx1 = newpoints.l_deltax;
*dy1 = newpoints.l_deltay;
return( 0 );
}
