static void __init mx25pdk_init(void)
{
imx25_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
imx25_add_imx_uart0(&uart_pdata);
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
imx25_add_imxdi_rtc();
imx25_add_imx_fb(&mx25pdk_fb_pdata);
imx25_add_imx2_wdt();
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
imx25_add_imx_keypad(&mx25pdk_keymap_data);
imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
gpio_request_one(MX25PDK_CAN_PWDN, GPIOF_OUT_INIT_LOW, "can-pwdn");
imx25_add_flexcan0();
}
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_free(GPIO_LED1);
gpio_request(GPIO_SWITCH1, "SWITCH1");
gpio_direction_input(GPIO_SWITCH1);
gpio_free(GPIO_SWITCH1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
gpio_free(GPIO_SWITCH1);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
/*
* system init for baseboard usage. Will be called by cpuimx25 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
printk(KERN_ERR "error setting mbimxsd pads !\n");
#if defined(CONFIG_SND_SOC_EUKREA_TLV320)
/* SSI unit master I2S codec connected to SSI_AUD5*/
mxc_audmux_v2_configure_port(0,
MXC_AUDMUX_V2_PTCR_SYN |
MXC_AUDMUX_V2_PTCR_TFSDIR |
MXC_AUDMUX_V2_PTCR_TFSEL(4) |
MXC_AUDMUX_V2_PTCR_TCLKDIR |
MXC_AUDMUX_V2_PTCR_TCSEL(4),
MXC_AUDMUX_V2_PDCR_RXDSEL(4)
);
mxc_audmux_v2_configure_port(4,
MXC_AUDMUX_V2_PTCR_SYN,
MXC_AUDMUX_V2_PDCR_RXDSEL(0)
);
#endif
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1(NULL);
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_free(GPIO_LED1);
gpio_request(GPIO_SWITCH1, "SWITCH1");
gpio_direction_input(GPIO_SWITCH1);
gpio_free(GPIO_SWITCH1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
gpio_free(GPIO_SWITCH1);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
}
static void __init armadillo4x0_lcd_init(void)
{
if (IS_ENABLED(CONFIG_MXC_PWM_SELECT1)) {
imx25_add_mxc_pwm(0);
pwm_add_table(armadillo4x0_pwm_lookup,
ARRAY_SIZE(armadillo4x0_pwm_lookup));
regulator_register_always_on(4, "fixed-5.0V",
fixed5v0_power_consumers,
ARRAY_SIZE(fixed5v0_power_consumers),
5000000);
imx_add_platform_device("pwm-backlight", -1, NULL, 0,
&armadillo4x0_backlight_data,
sizeof(armadillo4x0_backlight_data));
}
if (IS_ENABLED(CONFIG_LCDC_MXC_SELECT))
imx25_add_imx_fb(&armadillo4x0_fb_pdata);
}
static void __init mx25pdk_init(void)
{
imx25_soc_init();
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
ARRAY_SIZE(mx25pdk_pads));
imx25_add_imx_uart0(&uart_pdata);
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
imx25_add_mxc_nand(&mx25pdk_nand_board_info);
imx25_add_imxdi_rtc(NULL);
imx25_add_imx_fb(&mx25pdk_fb_pdata);
imx25_add_imx2_wdt(NULL);
mx25pdk_fec_reset();
imx25_add_fec(&mx25_fec_pdata);
imx25_add_imx_keypad(&mx25pdk_keymap_data);
imx25_add_sdhci_esdhc_imx(0, &mx25pdk_esdhc_pdata);
imx25_add_imx_i2c0(&mx25_3ds_i2c0_data);
}