static void __init eukrea_cpuimx51sd_init(void)
{
imx51_soc_init();
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads,
ARRAY_SIZE(eukrea_cpuimx51sd_pads));
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info);
gpio_request(ETH_RST, "eth_rst");
gpio_set_value(ETH_RST, 1);
imx51_add_fec(NULL);
gpio_request(CAN_IRQGPIO, "can_irq");
gpio_direction_input(CAN_IRQGPIO);
gpio_free(CAN_IRQGPIO);
gpio_request(CAN_NCS, "can_ncs");
gpio_direction_output(CAN_NCS, 1);
gpio_free(CAN_NCS);
gpio_request(CAN_RST, "can_rst");
gpio_direction_output(CAN_RST, 0);
msleep(20);
gpio_set_value(CAN_RST, 1);
imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata);
spi_register_board_info(cpuimx51sd_spi_device,
ARRAY_SIZE(cpuimx51sd_spi_device));
gpio_request(TSC2007_IRQGPIO, "tsc2007_irq");
gpio_direction_input(TSC2007_IRQGPIO);
gpio_free(TSC2007_IRQGPIO);
i2c_register_board_info(0, eukrea_cpuimx51sd_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx51sd_i2c_devices));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
if (otg_mode_host)
imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
imx51_add_fsl_usb2_udc(&usb_pdata);
}
gpio_request(USBH1_RST, "usb_rst");
gpio_direction_output(USBH1_RST, 0);
msleep(20);
gpio_set_value(USBH1_RST, 1);
imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD
eukrea_mbimxsd51_baseboard_init();
#endif
}
/*
* Board specific initialization.
*/
static void __init mx51_babbage_init(void)
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
imx51_soc_init();
#if defined(CONFIG_CPU_FREQ_IMX)
get_cpu_op = mx51_get_cpu_op;
#endif
imx51_babbage_common_init();
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, NULL);
imx51_add_imx_uart(2, &uart_pdata);
babbage_fec_reset();
imx51_add_fec(NULL);
/* Set the PAD settings for the pwr key. */
mxc_iomux_v3_setup_pad(power_key);
imx_add_gpio_keys(&imx_button_data);
imx51_add_imx_i2c(0, &babbage_i2c_data);
imx51_add_imx_i2c(1, &babbage_i2c_data);
imx51_add_hsi2c(&babbage_hsi2c_data);
if (otg_mode_host)
imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
imx51_add_fsl_usb2_udc(&usb_pdata);
}
gpio_usbh1_active();
imx51_add_mxc_ehci_hs(1, &usbh1_config);
/* setback USBH1_STP to be function */
mxc_iomux_v3_setup_pad(usbh1stp);
babbage_usbhub_reset();
imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data);
imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data);
spi_register_board_info(mx51_babbage_spi_board_info,
ARRAY_SIZE(mx51_babbage_spi_board_info));
imx51_add_ecspi(0, &mx51_babbage_spi_pdata);
imx51_add_imx2_wdt(0);
}
static void __init mx51_efika_usb(void)
{
mx51_efika_hubreset();
/* pulling it low, means no USB at all... */
gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset");
gpio_direction_output(EFIKA_USB_PHY_RESET, 0);
msleep(1);
gpio_set_value(EFIKA_USB_PHY_RESET, 1);
usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS |
ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND);
imx51_add_mxc_ehci_otg(&dr_utmi_config);
if (usbh1_config.otg)
imx51_add_mxc_ehci_hs(1, &usbh1_config);
}
static void __init eukrea_cpuimx51_init(void)
{
imx51_soc_init();
mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads,
ARRAY_SIZE(eukrea_cpuimx51_pads));
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info);
gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq");
gpio_direction_input(CPUIMX51_QUARTA_GPIO);
gpio_free(CPUIMX51_QUARTA_GPIO);
gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq");
gpio_direction_input(CPUIMX51_QUARTB_GPIO);
gpio_free(CPUIMX51_QUARTB_GPIO);
gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq");
gpio_direction_input(CPUIMX51_QUARTC_GPIO);
gpio_free(CPUIMX51_QUARTC_GPIO);
gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq");
gpio_direction_input(CPUIMX51_QUARTD_GPIO);
gpio_free(CPUIMX51_QUARTD_GPIO);
imx51_add_fec(NULL);
platform_add_devices(devices, ARRAY_SIZE(devices));
imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data);
i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx51_i2c_devices));
if (otg_mode_host)
imx51_add_mxc_ehci_otg(&dr_utmi_config);
else {
initialize_otg_port(NULL);
imx51_add_fsl_usb2_udc(&usb_pdata);
}
imx51_add_mxc_ehci_hs(1, &usbh1_config);
#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD
eukrea_mbimx51_baseboard_init();
#endif
}
