/*
* Initialize all the error tables that may be used by com_err
* in this module.
*/
void
InitErrTabs(void)
{
initialize_ACFG_error_table();
initialize_KA_error_table();
initialize_RXK_error_table();
initialize_CMD_error_table();
initialize_VL_error_table();
initialize_BUTM_error_table();
initialize_VOLS_error_table();
initialize_BUTC_error_table();
initialize_BUTX_error_table();
initialize_BUDB_error_table();
initialize_BUCD_error_table();
initialize_KTC_error_table();
}
static int
WorkerBee(struct cmd_syndesc *as, void *arock)
{
afs_int32 code;
struct rx_securityClass *(securityObjects[3]);
struct rx_service *service;
time_t tokenExpires;
char cellName[64];
int localauth;
/*process arguments */
afs_int32 portOffset = 0;
#ifdef AFS_PTHREAD_ENV
pthread_t dbWatcherPid;
pthread_attr_t tattr;
AFS_SIGSET_DECL;
#else
PROCESS dbWatcherPid;
#endif
afs_uint32 host = htonl(INADDR_ANY);
debugLevel = 0;
/*initialize the error tables */
initialize_KA_error_table();
initialize_RXK_error_table();
initialize_KTC_error_table();
initialize_ACFG_error_table();
initialize_CMD_error_table();
initialize_VL_error_table();
initialize_BUTM_error_table();
initialize_BUTC_error_table();
#ifdef xbsa
initialize_BUTX_error_table();
#endif /*xbs */
initialize_VOLS_error_table();
initialize_BUDB_error_table();
initialize_BUCD_error_table();
if (as->parms[0].items) {
portOffset = SafeATOL(as->parms[0].items->data);
if (portOffset == -1) {
fprintf(stderr, "Illegal port offset '%s'\n",
as->parms[0].items->data);
exit(1);
} else if (portOffset > BC_MAXPORTOFFSET) {
fprintf(stderr, "%u exceeds max port offset %u\n", portOffset,
BC_MAXPORTOFFSET);
exit(1);
}
}
xbsaType = XBSA_SERVER_TYPE_NONE; /* default */
if (as->parms[3].items) { /* -device */
globalTapeConfig.capacity = 0x7fffffff; /* 2T for max tape capacity */
globalTapeConfig.fileMarkSize = 0;
globalTapeConfig.portOffset = portOffset;
strncpy(globalTapeConfig.device, as->parms[3].items->data, 100);
xbsaType = XBSA_SERVER_TYPE_NONE; /* Not XBSA */
} else {
/* Search for an entry in tapeconfig file */
code = GetDeviceConfig(tapeConfigFile, &globalTapeConfig, portOffset);
if (code == -1) {
fprintf(stderr, "Problem in reading config file %s\n",
tapeConfigFile);
exit(1);
}
/* Set xbsaType. If code == 1, no entry was found in the tapeconfig file so
* it's an XBSA server. Don't know if its ADSM or not so its unknown.
*/
xbsaType =
((code == 1) ? XBSA_SERVER_TYPE_UNKNOWN : XBSA_SERVER_TYPE_NONE);
}
if (as->parms[6].items) { /* -restoretofile */
int s = strlen(as->parms[6].items->data);
restoretofile = malloc(s + 1);
strncpy(restoretofile, as->parms[6].items->data, s + 1);
printf("Restore to file '%s'\n", restoretofile);
}
/* Go and read the config file: CFG_<device> or CFG_<port>. We will also set
* the exact xbsaType within the call (won't be unknown) - double check.
*/
code = GetConfigParams(pFile, portOffset);
if (code)
exit(code);
#ifdef xbsa
if (xbsaType == XBSA_SERVER_TYPE_UNKNOWN) {
printf
("\nConfiguration file error, the TYPE parameter must be specified, or\n");
printf("an entry must exist in %s for port %d\n", tapeConfigFile,
portOffset);
exit(1);
}
#else
/* Not compiled for XBSA code so we can't support it */
if (CONF_XBSA) {
printf("\nNo entry found in %s for port %d\n", tapeConfigFile,
portOffset);
printf("This binary does not have XBSA support\n");
exit(1);
}
#endif
/* Open the log files. The pathnames were set in GetConfigParams() */
logIO = fopen(logFile, "a");
if (!logIO) {
fprintf(stderr, "Failed to open %s\n", logFile);
exit(1);
}
ErrorlogIO = fopen(ErrorlogFile, "a");
if (!ErrorlogIO) {
fprintf(stderr, "Failed to open %s\n", ErrorlogFile);
exit(1);
}
if (lastLog) {
lastLogIO = fopen(lastLogFile, "a");
if (!lastLogIO) {
fprintf(stderr, "Failed to open %s\n", lastLogFile);
exit(1);
}
}
if (centralLogFile) {
struct stat sbuf;
afs_int32 statcode;
#ifndef AFS_NT40_ENV
char path[AFSDIR_PATH_MAX];
#endif
statcode = stat(centralLogFile, &sbuf);
centralLogIO = fopen(centralLogFile, "a");
if (!centralLogIO) {
fprintf(stderr, "Failed to open %s; error %d\n", centralLogFile,
errno);
exit(1);
}
#ifndef AFS_NT40_ENV
/* Make sure it is not in AFS, has to have been created first */
if (!realpath(centralLogFile, path)) {
fprintf(stderr,
"Warning: can't determine real path of '%s' (%d)\n",
centralLogFile, errno);
} else {
if (strncmp(path, "/afs/", 5) == 0) {
fprintf(stderr, "The central log '%s' should not be in AFS\n",
centralLogFile);
exit(1);
}
}
#endif
/* Write header if created it */
if (statcode) {
char *h1 =
"TASK START DATE/TIME END DATE/TIME ELAPSED VOLUMESET\n";
char *h2 =
"----- ------------------- ------------------- -------- ---------\n";
/* File didn't exist before so write the header lines */
fwrite(h1, strlen(h1), 1, centralLogIO);
fwrite(h2, strlen(h2), 1, centralLogIO);
fflush(centralLogIO);
}
}
if (as->parms[1].items) {
debugLevel = SafeATOL(as->parms[1].items->data);
if (debugLevel == -1) {
TLog(0, "Illegal debug level '%s'\n", as->parms[1].items->data);
exit(1);
}
}
#ifdef xbsa
/* Setup XBSA library interface */
if (CONF_XBSA) {
afs_int32 rc;
rc = xbsa_MountLibrary(&butxInfo, xbsaType);
if (rc != XBSA_SUCCESS) {
TapeLog(0, 0, rc, 0, "Unable to mount the XBSA library\n");
return (1);
}
forcemultiple = (as->parms[7].items ? 1 : 0);/*-xbsaforcemultiple */
if (forcemultiple)
printf("Force XBSA multiple server support\n");
rc = InitToServer(0 /*taskid */ , &butxInfo, adsmServerName);
if (rc != XBSA_SUCCESS)
return (1);
}
#endif /*xbsa */
/* cell switch */
if (as->parms[2].items)
strncpy(cellName, as->parms[2].items->data, sizeof(cellName));
else
cellName[0] = '\0';
if (as->parms[4].items)
autoQuery = 0;
localauth = (as->parms[5].items ? 1 : 0);
rxBind = (as->parms[8].items ? 1 : 0);
if (rxBind) {
afs_int32 ccode;
if (AFSDIR_SERVER_NETRESTRICT_FILEPATH ||
AFSDIR_SERVER_NETINFO_FILEPATH) {
char reason[1024];
ccode = parseNetFiles(SHostAddrs, NULL, NULL,
ADDRSPERSITE, reason,
AFSDIR_SERVER_NETINFO_FILEPATH,
AFSDIR_SERVER_NETRESTRICT_FILEPATH);
} else
{
ccode = rx_getAllAddr(SHostAddrs, ADDRSPERSITE);
}
if (ccode == 1)
host = SHostAddrs[0];
}
code = rx_InitHost(host, htons(BC_TAPEPORT + portOffset));
if (code) {
TapeLog(0, 0, code, 0, "rx init failed on port %u\n",
BC_TAPEPORT + portOffset);
exit(1);
}
rx_SetRxDeadTime(150);
/* Establish connection with the vldb server */
code = vldbClientInit(0, localauth, cellName, &cstruct, &tokenExpires);
if (code) {
TapeLog(0, 0, code, 0, "Can't access vldb\n");
return code;
}
strcpy(globalCellName, cellName);
/*initialize the dumpNode list */
InitNodeList(portOffset);
deviceLatch =
(struct deviceSyncNode *)(malloc(sizeof(struct deviceSyncNode)));
Lock_Init(&(deviceLatch->lock));
deviceLatch->flags = 0;
/* initialize database support, volume support, and logs */
/* Create a single security object, in this case the null security
* object, for unauthenticated connections, which will be used to control
* security on connections made to this server
*/
securityObjects[0] = rxnull_NewServerSecurityObject();
securityObjects[1] = (struct rx_securityClass *)0; /* don't bother with rxvab */
if (!securityObjects[0]) {
TLog(0, "rxnull_NewServerSecurityObject");
exit(1);
}
service =
rx_NewServiceHost(host, 0, 1, "BUTC", securityObjects, 3, TC_ExecuteRequest);
if (!service) {
TLog(0, "rx_NewService");
exit(1);
}
rx_SetMaxProcs(service, 4);
/* Establish connection to the backup database */
code = udbClientInit(0, localauth, cellName);
if (code) {
TapeLog(0, 0, code, 0, "Can't access backup database\n");
exit(1);
}
/* This call is here to verify that we are authentiated.
* The call does nothing and will return BUDB_NOTPERMITTED
* if we don't belong.
*/
code = bcdb_deleteDump(0, 0, 0, 0);
if (code == BUDB_NOTPERMITTED) {
TapeLog(0, 0, code, 0, "Can't access backup database\n");
exit(1);
}
initStatus();
#ifdef AFS_PTHREAD_ENV
code = pthread_attr_init(&tattr);
if (code) {
TapeLog(0, 0, code, 0,
"Can't pthread_attr_init database monitor task");
exit(1);
}
code = pthread_attr_setdetachstate(&tattr, PTHREAD_CREATE_DETACHED);
if (code) {
TapeLog(0, 0, code, 0,
"Can't pthread_attr_setdetachstate database monitor task");
exit(1);
}
AFS_SIGSET_CLEAR();
code = pthread_create(&dbWatcherPid, &tattr, dbWatcher, (void *)2);
AFS_SIGSET_RESTORE();
#else
code =
LWP_CreateProcess(dbWatcher, 20480, LWP_NORMAL_PRIORITY, (void *)2,
"dbWatcher", &dbWatcherPid);
#endif
if (code) {
TapeLog(0, 0, code, 0, "Can't create database monitor task");
exit(1);
}
TLog(0, "Starting Tape Coordinator: Port offset %u Debug level %u\n",
portOffset, debugLevel);
TLog(0, "Token expires: %s\n", cTIME(&tokenExpires));
rx_StartServer(1); /* Donate this process to the server process pool */
TLog(0, "Error: StartServer returned");
exit(1);
}
static int
WorkerBee(struct cmd_syndesc *as, void *arock)
{
afs_int32 code, numClasses;
struct rx_securityClass *(nullObjects[1]), **secObjs, **allObjs;
struct rx_service *service;
time_t tokenExpires;
char cellName[64];
int localauth;
/*process arguments */
afs_int32 portOffset = 0;
#ifdef AFS_PTHREAD_ENV
pthread_t dbWatcherPid;
pthread_attr_t tattr;
AFS_SIGSET_DECL;
#else
PROCESS dbWatcherPid;
#endif
char hoststr[16];
afs_uint32 host = htonl(INADDR_ANY);
char *auditFileName = NULL;
char *auditInterface = NULL;
debugLevel = 0;
/*initialize the error tables */
initialize_KA_error_table();
initialize_RXK_error_table();
initialize_KTC_error_table();
initialize_ACFG_error_table();
initialize_CMD_error_table();
initialize_VL_error_table();
initialize_BUTM_error_table();
initialize_BUTC_error_table();
#ifdef xbsa
initialize_BUTX_error_table();
#endif /*xbs */
initialize_VOLS_error_table();
initialize_BUDB_error_table();
initialize_BUCD_error_table();
if (as->parms[0].items) {
portOffset = SafeATOL(as->parms[0].items->data);
if (portOffset == -1) {
fprintf(stderr, "Illegal port offset '%s'\n",
as->parms[0].items->data);
exit(1);
} else if (portOffset > BC_MAXPORTOFFSET) {
fprintf(stderr, "%u exceeds max port offset %u\n", portOffset,
BC_MAXPORTOFFSET);
exit(1);
}
}
xbsaType = XBSA_SERVER_TYPE_NONE; /* default */
if (as->parms[3].items) { /* -device */
globalTapeConfig.capacity = 0x7fffffff; /* 2T for max tape capacity */
globalTapeConfig.fileMarkSize = 0;
globalTapeConfig.portOffset = portOffset;
strncpy(globalTapeConfig.device, as->parms[3].items->data, 100);
xbsaType = XBSA_SERVER_TYPE_NONE; /* Not XBSA */
} else {
/* Search for an entry in tapeconfig file */
code = GetDeviceConfig(tapeConfigFile, &globalTapeConfig, portOffset);
if (code == -1) {
fprintf(stderr, "Problem in reading config file %s\n",
tapeConfigFile);
exit(1);
}
/* Set xbsaType. If code == 1, no entry was found in the tapeconfig file so
* it's an XBSA server. Don't know if its ADSM or not so its unknown.
*/
xbsaType =
((code == 1) ? XBSA_SERVER_TYPE_UNKNOWN : XBSA_SERVER_TYPE_NONE);
}
if (as->parms[6].items) { /* -restoretofile */
restoretofile = strdup(as->parms[6].items->data);
printf("Restore to file '%s'\n", restoretofile);
}
/* Go and read the config file: CFG_<device> or CFG_<port>. We will also set
* the exact xbsaType within the call (won't be unknown) - double check.
*/
code = GetConfigParams(pFile, portOffset);
if (code)
exit(code);
#ifdef xbsa
if (xbsaType == XBSA_SERVER_TYPE_UNKNOWN) {
printf
("\nConfiguration file error, the TYPE parameter must be specified, or\n");
printf("an entry must exist in %s for port %d\n", tapeConfigFile,
portOffset);
exit(1);
}
#else
/* Not compiled for XBSA code so we can't support it */
if (CONF_XBSA) {
printf("\nNo entry found in %s for port %d\n", tapeConfigFile,
portOffset);
printf("This binary does not have XBSA support\n");
exit(1);
}
#endif
/* Open the log files. The pathnames were set in GetConfigParams() */
logIO = fopen(logFile, "a");
if (!logIO) {
fprintf(stderr, "Failed to open %s\n", logFile);
exit(1);
}
ErrorlogIO = fopen(ErrorlogFile, "a");
if (!ErrorlogIO) {
fprintf(stderr, "Failed to open %s\n", ErrorlogFile);
exit(1);
}
if (lastLog) {
lastLogIO = fopen(lastLogFile, "a");
if (!lastLogIO) {
fprintf(stderr, "Failed to open %s\n", lastLogFile);
exit(1);
}
}
if (centralLogFile) {
struct stat sbuf;
afs_int32 statcode;
#ifndef AFS_NT40_ENV
char *path;
#endif
statcode = stat(centralLogFile, &sbuf);
centralLogIO = fopen(centralLogFile, "a");
if (!centralLogIO) {
fprintf(stderr, "Failed to open %s; error %d\n", centralLogFile,
errno);
exit(1);
}
#ifndef AFS_NT40_ENV
/* Make sure it is not in AFS, has to have been created first */
path = malloc(AFSDIR_PATH_MAX);
if (path == NULL || !realpath(centralLogFile, path)) {
fprintf(stderr,
"Warning: can't determine real path of '%s' (%d)\n",
centralLogFile, errno);
} else {
if (strncmp(path, "/afs/", 5) == 0) {
fprintf(stderr, "The central log '%s' should not be in AFS\n",
centralLogFile);
exit(1);
}
}
free(path);
#endif
/* Write header if created it */
if (statcode) {
char *h1 =
"TASK START DATE/TIME END DATE/TIME ELAPSED VOLUMESET\n";
char *h2 =
"----- ------------------- ------------------- -------- ---------\n";
/* File didn't exist before so write the header lines */
fwrite(h1, strlen(h1), 1, centralLogIO);
fwrite(h2, strlen(h2), 1, centralLogIO);
fflush(centralLogIO);
}
}
/* Open the configuration directory */
butc_confdir = afsconf_Open(AFSDIR_SERVER_ETC_DIRPATH);
if (butc_confdir == NULL) {
TLog(0, "Failed to open server configuration directory");
exit(1);
}
/* Start auditing */
osi_audit_init();
if (as->parms[9].items) {
auditFileName = as->parms[9].items->data;
}
if (auditFileName != NULL)
osi_audit_file(auditFileName);
if (as->parms[10].items) {
auditInterface = as->parms[10].items->data;
if (osi_audit_interface(auditInterface)) {
TLog(0, "Invalid audit interface '%s'\n", auditInterface);
exit(1);
}
}
osi_audit(TC_StartEvent, 0, AUD_END);
osi_audit_set_user_check(butc_confdir, tc_IsLocalRealmMatch);
if (as->parms[1].items) {
debugLevel = SafeATOL(as->parms[1].items->data);
if (debugLevel == -1) {
TLog(0, "Illegal debug level '%s'\n", as->parms[1].items->data);
exit(1);
}
}
#ifdef xbsa
/* Setup XBSA library interface */
if (CONF_XBSA) {
afs_int32 rc;
rc = xbsa_MountLibrary(&butxInfo, xbsaType);
if (rc != XBSA_SUCCESS) {
TapeLog(0, 0, rc, 0, "Unable to mount the XBSA library\n");
return (1);
}
forcemultiple = (as->parms[7].items ? 1 : 0);/*-xbsaforcemultiple */
if (forcemultiple)
printf("Force XBSA multiple server support\n");
rc = InitToServer(0 /*taskid */ , &butxInfo, adsmServerName);
if (rc != XBSA_SUCCESS)
return (1);
(void)signal(SIGINT, xbsa_shutdown);
(void)signal(SIGHUP, xbsa_shutdown);
}
#endif /*xbsa */
/* cell switch */
if (as->parms[2].items)
strncpy(cellName, as->parms[2].items->data, sizeof(cellName));
else
cellName[0] = '\0';
if (as->parms[4].items)
autoQuery = 0;
localauth = (as->parms[5].items ? 1 : 0);
rxBind = (as->parms[8].items ? 1 : 0);
allow_unauth = (as->parms[11].items ? 1 : 0);
if (!allow_unauth && !localauth) {
const char *errstr = "Neither -localauth nor -allow_unauthenticated was provided; refusing to start in unintended insecure configuration\n";
TLog(0, "%s", (char *)errstr);
exit(1);
}
if (rxBind) {
afs_int32 ccode;
if (AFSDIR_SERVER_NETRESTRICT_FILEPATH ||
AFSDIR_SERVER_NETINFO_FILEPATH) {
char reason[1024];
ccode = afsconf_ParseNetFiles(SHostAddrs, NULL, NULL,
ADDRSPERSITE, reason,
AFSDIR_SERVER_NETINFO_FILEPATH,
AFSDIR_SERVER_NETRESTRICT_FILEPATH);
} else
{
ccode = rx_getAllAddr(SHostAddrs, ADDRSPERSITE);
}
if (ccode == 1)
host = SHostAddrs[0];
}
TLog(0, "butc binding rx to %s:%d\n",
afs_inet_ntoa_r(host, hoststr), BC_TAPEPORT + portOffset);
code = rx_InitHost(host, htons(BC_TAPEPORT + portOffset));
if (code) {
TapeLog(0, 0, code, 0, "rx init failed on port %u\n",
BC_TAPEPORT + portOffset);
exit(1);
}
rx_SetRxDeadTime(150);
/* Establish connection with the vldb server */
code = vldbClientInit(0, localauth, cellName, &cstruct, &tokenExpires);
if (code) {
TapeLog(0, 0, code, 0, "Can't access vldb\n");
return code;
}
strcpy(globalCellName, cellName);
/*initialize the dumpNode list */
InitNodeList(portOffset);
deviceLatch = malloc(sizeof(struct deviceSyncNode));
Lock_Init(&(deviceLatch->lock));
deviceLatch->flags = 0;
/* initialize database support, volume support, and logs */
/*
* Create security objects for the Rx server functionality. Historically
* this was a single rxnull security object, since the tape controller was
* run by an operator that had local access to the tape device and some
* administrative privilege in the cell (to be able to perform volume-level
* accesses), but on a machine that was not necessarily trusted to hold the
* cell-wide key.
*
* Such a configuration is, of course, insecure because anyone can make
* inbound RPCs and manipulate the database, including creating bogus
* dumps and restoring them! Additionally, in modern usage, butc is
* frequently run with -localauth to authenticate its outbound connections
* to the volservers and budb with the cell-wide key, in which case the
* cell-wide key is present and could be used to authenticate incoming
* connections as well.
*
* If -localauth is in use, create the full barrage of server security
* objects, including rxkad, so that inbound connections can be verified
* to only be made by authenticated clients. Otherwise, only the rxnull
* class is in use with a single server security object. Note that butc
* will refuse to start in this configuration unless the
* "-allow_unauthenticated" flag is provided, indicating that the operator
* has ensured that incoming connections are appropriately restricted by
* firewall configuration or network topology.
*/
if (allow_unauth) {
nullObjects[RX_SECIDX_NULL] = rxnull_NewServerSecurityObject();
if (!nullObjects[RX_SECIDX_NULL]) {
TLog(0, "rxnull_NewServerSecurityObject");
exit(1);
}
numClasses = 1;
secObjs = nullObjects;
} else {
/* Must be -localauth, so the cell keys are available. */
afsconf_BuildServerSecurityObjects(butc_confdir, &allObjs, &numClasses);
secObjs = allObjs;
}
service =
rx_NewServiceHost(host, 0, 1, "BUTC", secObjs, numClasses, TC_ExecuteRequest);
if (!service) {
TLog(0, "rx_NewService");
exit(1);
}
rx_SetMaxProcs(service, 4);
/* Establish connection to the backup database */
code = udbClientInit(0, localauth, cellName);
if (code) {
TapeLog(0, 0, code, 0, "Can't access backup database\n");
exit(1);
}
/* This call is here to verify that we are authentiated.
* The call does nothing and will return BUDB_NOTPERMITTED
* if we don't belong.
*/
code = bcdb_deleteDump(0, 0, 0, 0);
if (code == BUDB_NOTPERMITTED) {
TapeLog(0, 0, code, 0, "Can't access backup database\n");
exit(1);
}
initStatus();
#ifdef AFS_PTHREAD_ENV
code = pthread_attr_init(&tattr);
if (code) {
TapeLog(0, 0, code, 0,
"Can't pthread_attr_init database monitor task");
exit(1);
}
code = pthread_attr_setdetachstate(&tattr, PTHREAD_CREATE_DETACHED);
if (code) {
TapeLog(0, 0, code, 0,
"Can't pthread_attr_setdetachstate database monitor task");
exit(1);
}
AFS_SIGSET_CLEAR();
code = pthread_create(&dbWatcherPid, &tattr, dbWatcher, (void *)2);
AFS_SIGSET_RESTORE();
#else
code =
LWP_CreateProcess(dbWatcher, 20480, LWP_NORMAL_PRIORITY, (void *)2,
"dbWatcher", &dbWatcherPid);
#endif
if (code) {
TapeLog(0, 0, code, 0, "Can't create database monitor task");
exit(1);
}
TLog(0, "Starting Tape Coordinator: Port offset %u Debug level %u\n",
portOffset, debugLevel);
TLog(0, "Token expires: %s\n", cTIME(&tokenExpires));
rx_StartServer(1); /* Donate this process to the server process pool */
TLog(0, "Error: StartServer returned");
exit(1);
}
