/*
* Adjust the displacement if the instruction uses the %rip-relative
* addressing mode.
* If it does, Return the address of the 32-bit displacement word.
* If not, return null.
* Only applicable to 64-bit x86.
*/
static void __kprobes fix_riprel(struct kprobe *p)
{
#ifdef CONFIG_X86_64
struct insn insn;
kernel_insn_init(&insn, p->ainsn.insn);
if (insn_rip_relative(&insn)) {
s64 newdisp;
u8 *disp;
insn_get_displacement(&insn);
/*
* The copied instruction uses the %rip-relative addressing
* mode. Adjust the displacement for the difference between
* the original location of this instruction and the location
* of the copy that will actually be run. The tricky bit here
* is making sure that the sign extension happens correctly in
* this calculation, since we need a signed 32-bit result to
* be sign-extended to 64 bits when it's added to the %rip
* value and yield the same 64-bit result that the sign-
* extension of the original signed 32-bit displacement would
* have given.
*/
newdisp = (u8 *) p->addr + (s64) insn.displacement.value -
(u8 *) p->ainsn.insn;
BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */
disp = (u8 *) p->ainsn.insn + insn_offset_displacement(&insn);
*(s32 *) disp = (s32) newdisp;
}
#endif
}
/*
* Copy an instruction and adjust the displacement if the instruction
* uses the %rip-relative addressing mode.
* If it does, Return the address of the 32-bit displacement word.
* If not, return null.
* Only applicable to 64-bit x86.
*/
int __copy_instruction(u8 *dest, u8 *src)
{
struct insn insn;
kprobe_opcode_t buf[MAX_INSN_SIZE];
int length;
unsigned long recovered_insn =
recover_probed_instruction(buf, (unsigned long)src);
if (!recovered_insn)
return 0;
kernel_insn_init(&insn, (void *)recovered_insn, MAX_INSN_SIZE);
insn_get_length(&insn);
length = insn.length;
/* Another subsystem puts a breakpoint, failed to recover */
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
return 0;
pax_open_kernel();
memcpy(dest, insn.kaddr, length);
pax_close_kernel();
#ifdef CONFIG_X86_64
if (insn_rip_relative(&insn)) {
s64 newdisp;
u8 *disp;
kernel_insn_init(&insn, dest, length);
insn_get_displacement(&insn);
/*
* The copied instruction uses the %rip-relative addressing
* mode. Adjust the displacement for the difference between
* the original location of this instruction and the location
* of the copy that will actually be run. The tricky bit here
* is making sure that the sign extension happens correctly in
* this calculation, since we need a signed 32-bit result to
* be sign-extended to 64 bits when it's added to the %rip
* value and yield the same 64-bit result that the sign-
* extension of the original signed 32-bit displacement would
* have given.
*/
newdisp = (u8 *) src + (s64) insn.displacement.value - (u8 *) dest;
if ((s64) (s32) newdisp != newdisp) {
pr_err("Kprobes error: new displacement does not fit into s32 (%llx)\n", newdisp);
pr_err("\tSrc: %p, Dest: %p, old disp: %x\n", src, dest, insn.displacement.value);
return 0;
}
disp = (u8 *) dest + insn_offset_displacement(&insn);
pax_open_kernel();
*(s32 *) disp = (s32) newdisp;
pax_close_kernel();
}
#endif
return length;
}
/*
* Copy an instruction with recovering modified instruction by kprobes
* and adjust the displacement if the instruction uses the %rip-relative
* addressing mode. Note that since @real will be the final place of copied
* instruction, displacement must be adjust by @real, not @dest.
* This returns the length of copied instruction, or 0 if it has an error.
*/
int __copy_instruction(u8 *dest, u8 *src, u8 *real, struct insn *insn)
{
kprobe_opcode_t buf[MAX_INSN_SIZE];
unsigned long recovered_insn =
recover_probed_instruction(buf, (unsigned long)src);
if (!recovered_insn || !insn)
return 0;
/* This can access kernel text if given address is not recovered */
if (probe_kernel_read(dest, (void *)recovered_insn, MAX_INSN_SIZE))
return 0;
kernel_insn_init(insn, dest, MAX_INSN_SIZE);
insn_get_length(insn);
/* Another subsystem puts a breakpoint, failed to recover */
if (insn->opcode.bytes[0] == BREAKPOINT_INSTRUCTION)
return 0;
/* We should not singlestep on the exception masking instructions */
if (insn_masking_exception(insn))
return 0;
#ifdef CONFIG_X86_64
/* Only x86_64 has RIP relative instructions */
if (insn_rip_relative(insn)) {
s64 newdisp;
u8 *disp;
/*
* The copied instruction uses the %rip-relative addressing
* mode. Adjust the displacement for the difference between
* the original location of this instruction and the location
* of the copy that will actually be run. The tricky bit here
* is making sure that the sign extension happens correctly in
* this calculation, since we need a signed 32-bit result to
* be sign-extended to 64 bits when it's added to the %rip
* value and yield the same 64-bit result that the sign-
* extension of the original signed 32-bit displacement would
* have given.
*/
newdisp = (u8 *) src + (s64) insn->displacement.value
- (u8 *) real;
if ((s64) (s32) newdisp != newdisp) {
pr_err("Kprobes error: new displacement does not fit into s32 (%llx)\n", newdisp);
return 0;
}
disp = (u8 *) dest + insn_offset_displacement(insn);
*(s32 *) disp = (s32) newdisp;
}
#endif
return insn->length;
}
void copy_and_fixup_insn(struct insn *src_insn, void *dest,
const struct kernsym *func) {
u32 *to_fixup;
unsigned long addr;
BUG_ON(src_insn->length == 0);
memcpy((void *)dest, (const void *)src_insn->kaddr,
src_insn->length);
if (src_insn->opcode.bytes[0] == OP_CALL_REL32 ||
src_insn->opcode.bytes[0] == OP_JMP_REL32) {
addr = (unsigned long)CODE_ADDR_FROM_OFFSET(
src_insn->kaddr,
src_insn->length,
src_insn->immediate.value);
if (addr >= (unsigned long)func->addr &&
addr < (unsigned long)func->addr + func->size)
return;
to_fixup = (u32 *)((unsigned long)dest +
insn_offset_immediate(src_insn));
*to_fixup = CODE_OFFSET_FROM_ADDR(dest, src_insn->length,
(void *)addr);
return;
}
#ifdef CONFIG_X86_64
if (!insn_rip_relative(src_insn))
return;
addr = (unsigned long)CODE_ADDR_FROM_OFFSET(
src_insn->kaddr,
src_insn->length,
src_insn->displacement.value);
if (addr >= (unsigned long)func->addr &&
addr < (unsigned long)func->addr + func->size)
return;
to_fixup = (u32 *)((unsigned long)dest +
insn_offset_displacement(src_insn));
*to_fixup = CODE_OFFSET_FROM_ADDR(dest, src_insn->length,
(void *)addr);
#endif
return;
}
/*
* Copy an instruction and adjust the displacement if the instruction
* uses the %rip-relative addressing mode.
* If it does, Return the address of the 32-bit displacement word.
* If not, return null.
* Only applicable to 64-bit x86.
*/
static int __kprobes __copy_instruction(u8 *dest, u8 *src, int recover)
{
struct insn insn;
int ret;
kprobe_opcode_t buf[MAX_INSN_SIZE];
kernel_insn_init(&insn, src);
if (recover) {
insn_get_opcode(&insn);
if (insn.opcode.bytes[0] == BREAKPOINT_INSTRUCTION) {
ret = recover_probed_instruction(buf,
(unsigned long)src);
if (ret)
return 0;
kernel_insn_init(&insn, buf);
}
}
insn_get_length(&insn);
memcpy(dest, insn.kaddr, insn.length);
#ifdef CONFIG_X86_64
if (insn_rip_relative(&insn)) {
s64 newdisp;
u8 *disp;
kernel_insn_init(&insn, dest);
insn_get_displacement(&insn);
/*
* The copied instruction uses the %rip-relative addressing
* mode. Adjust the displacement for the difference between
* the original location of this instruction and the location
* of the copy that will actually be run. The tricky bit here
* is making sure that the sign extension happens correctly in
* this calculation, since we need a signed 32-bit result to
* be sign-extended to 64 bits when it's added to the %rip
* value and yield the same 64-bit result that the sign-
* extension of the original signed 32-bit displacement would
* have given.
*/
newdisp = (u8 *) src + (s64) insn.displacement.value -
(u8 *) dest;
BUG_ON((s64) (s32) newdisp != newdisp); /* Sanity check. */
disp = (u8 *) dest + insn_offset_displacement(&insn);
*(s32 *) disp = (s32) newdisp;
}
#endif
return insn.length;
}
/*
* If arch_uprobe->insn doesn't use rip-relative addressing, return
* immediately. Otherwise, rewrite the instruction so that it accesses
* its memory operand indirectly through a scratch register. Set
* arch_uprobe->fixups and arch_uprobe->rip_rela_target_address
* accordingly. (The contents of the scratch register will be saved
* before we single-step the modified instruction, and restored
* afterward.)
*
* We do this because a rip-relative instruction can access only a
* relatively small area (+/- 2 GB from the instruction), and the XOL
* area typically lies beyond that area. At least for instructions
* that store to memory, we can't execute the original instruction
* and "fix things up" later, because the misdirected store could be
* disastrous.
*
* Some useful facts about rip-relative instructions:
*
* - There's always a modrm byte.
* - There's never a SIB byte.
* - The displacement is always 4 bytes.
*/
static void
handle_riprel_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, struct insn *insn)
{
u8 *cursor;
u8 reg;
if (mm->context.ia32_compat)
return;
auprobe->rip_rela_target_address = 0x0;
if (!insn_rip_relative(insn))
return;
/*
* insn_rip_relative() would have decoded rex_prefix, modrm.
* Clear REX.b bit (extension of MODRM.rm field):
* we want to encode rax/rcx, not r8/r9.
*/
if (insn->rex_prefix.nbytes) {
cursor = auprobe->insn + insn_offset_rex_prefix(insn);
*cursor &= 0xfe; /* Clearing REX.B bit */
}
/*
* Point cursor at the modrm byte. The next 4 bytes are the
* displacement. Beyond the displacement, for some instructions,
* is the immediate operand.
*/
cursor = auprobe->insn + insn_offset_modrm(insn);
insn_get_length(insn);
/*
* Convert from rip-relative addressing to indirect addressing
* via a scratch register. Change the r/m field from 0x5 (%rip)
* to 0x0 (%rax) or 0x1 (%rcx), and squeeze out the offset field.
*/
reg = MODRM_REG(insn);
if (reg == 0) {
/*
* The register operand (if any) is either the A register
* (%rax, %eax, etc.) or (if the 0x4 bit is set in the
* REX prefix) %r8. In any case, we know the C register
* is NOT the register operand, so we use %rcx (register
* #1) for the scratch register.
*/
auprobe->fixups = UPROBE_FIX_RIP_CX;
/* Change modrm from 00 000 101 to 00 000 001. */
*cursor = 0x1;
} else {
/* Use %rax (register #0) for the scratch register. */
auprobe->fixups = UPROBE_FIX_RIP_AX;
/* Change modrm from 00 xxx 101 to 00 xxx 000 */
*cursor = (reg << 3);
}
/* Target address = address of next instruction + (signed) offset */
auprobe->rip_rela_target_address = (long)insn->length + insn->displacement.value;
/* Displacement field is gone; slide immediate field (if any) over. */
if (insn->immediate.nbytes) {
cursor++;
memmove(cursor, cursor + insn->displacement.nbytes, insn->immediate.nbytes);
}
return;
}
