static int __i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_init_pch_refclk(dev);
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
/* We need working interrupts for modeset enabling ... */
drm_irq_install(dev);
intel_modeset_init_hw(dev);
intel_modeset_setup_hw_state(dev, false);
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
* bother with the tiny race here where we might loose hotplug
* notifications.
* */
intel_hpd_init(dev);
dev_priv->enable_hotplug_processing = true;
}
intel_opregion_init(dev);
/*
* The console lock can be pretty contented on resume due
* to all the printk activity. Try to keep it out of the hot
* path of resume if possible.
*/
if (console_trylock()) {
intel_fbdev_set_suspend(dev, 0);
console_unlock();
} else {
schedule_work(&dev_priv->console_resume_work);
}
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_DONE;
mutex_unlock(&dev_priv->modeset_restore_lock);
return error;
}
void intel_console_resume(struct work_struct *work)
{
#ifndef __NetBSD__ /* XXX fb */
struct drm_i915_private *dev_priv =
container_of(work, struct drm_i915_private,
console_resume_work);
struct drm_device *dev = dev_priv->dev;
console_lock();
intel_fbdev_set_suspend(dev, 0);
console_unlock();
#endif
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm_kms_helper_poll_disable(dev);
#ifndef __NetBSD__ /* pmf handles this for us. */
pci_save_state(dev->pdev);
#endif
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error = i915_gem_idle(dev);
if (error) {
#ifdef __NetBSD__
dev_err(pci_dev_dev(dev->pdev),
"GEM idle failed, resume might fail\n");
#else
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
#endif
return error;
}
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
intel_modeset_disable(dev);
drm_irq_uninstall(dev);
}
i915_save_state(dev);
intel_opregion_fini(dev);
/* Modeset on resume, not lid events */
dev_priv->modeset_on_lid = 0;
#ifndef __NetBSD__ /* XXX fb */
console_lock();
intel_fbdev_set_suspend(dev, 1);
console_unlock();
#endif
return 0;
}
static int i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
if (HAS_PCH_SPLIT(dev))
ironlake_init_pch_refclk(dev);
drm_mode_config_reset(dev);
drm_irq_install(dev);
/* Resume the modeset for every activated CRTC */
mutex_lock(&dev->mode_config.mutex);
drm_helper_resume_force_mode(dev);
mutex_unlock(&dev->mode_config.mutex);
if (IS_IRONLAKE_M(dev))
ironlake_enable_rc6(dev);
}
intel_opregion_init(dev);
dev_priv->modeset_on_lid = 0;
console_lock();
intel_fbdev_set_suspend(dev, 0);
console_unlock();
return error;
}
static int __i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_init_pch_refclk(dev);
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
intel_modeset_init_hw(dev);
intel_modeset_setup_hw_state(dev, false);
drm_irq_install(dev);
}
intel_opregion_init(dev);
dev_priv->modeset_on_lid = 0;
#ifndef __NetBSD__ /* XXX fb */
/*
* The console lock can be pretty contented on resume due
* to all the printk activity. Try to keep it out of the hot
* path of resume if possible.
*/
if (console_trylock()) {
intel_fbdev_set_suspend(dev, 0);
console_unlock();
} else {
schedule_work(&dev_priv->console_resume_work);
}
#endif
return error;
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
/* ignore lid events during suspend */
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_SUSPENDED;
mutex_unlock(&dev_priv->modeset_restore_lock);
intel_set_power_well(dev, true);
drm_kms_helper_poll_disable(dev);
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error = i915_gem_idle(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
intel_modeset_disable(dev);
drm_irq_uninstall(dev);
dev_priv->enable_hotplug_processing = false;
}
i915_save_state(dev);
intel_opregion_fini(dev);
console_lock();
intel_fbdev_set_suspend(dev, 1);
console_unlock();
return 0;
}
static int i915_drm_thaw(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev))
ironlake_init_pch_refclk(dev);
mutex_lock(&dev->struct_mutex);
dev_priv->mm.suspended = 0;
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
intel_modeset_init_hw(dev);
intel_modeset_setup_hw_state(dev, false);
drm_mode_config_reset(dev);
drm_irq_install(dev);
}
intel_opregion_init(dev);
dev_priv->modeset_on_lid = 0;
console_lock();
intel_fbdev_set_suspend(dev, 0);
console_unlock();
return error;
}
static int i915_drm_resume(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
disable_rpm_wakeref_asserts(dev_priv);
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
i915_restore_state(dev);
intel_opregion_setup(dev);
intel_init_pch_refclk(dev);
drm_mode_config_reset(dev);
/*
* Interrupts have to be enabled before any batches are run. If not the
* GPU will hang. i915_gem_init_hw() will initiate batches to
* update/restore the context.
*
* Modeset enabling in intel_modeset_init_hw() also needs working
* interrupts.
*/
intel_runtime_pm_enable_interrupts(dev_priv);
mutex_lock(&dev->struct_mutex);
if (i915_gem_init_hw(dev)) {
DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
atomic_or(I915_WEDGED, &dev_priv->gpu_error.reset_counter);
}
mutex_unlock(&dev->struct_mutex);
intel_guc_resume(dev);
intel_modeset_init_hw(dev);
spin_lock_irq(&dev_priv->irq_lock);
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irq(&dev_priv->irq_lock);
intel_dp_mst_resume(dev);
intel_display_resume(dev);
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
* bother with the tiny race here where we might loose hotplug
* notifications.
* */
intel_hpd_init(dev_priv);
/* Config may have changed between suspend and resume */
drm_helper_hpd_irq_event(dev);
intel_opregion_init(dev);
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING, false);
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_DONE;
mutex_unlock(&dev_priv->modeset_restore_lock);
intel_opregion_notify_adapter(dev, PCI_D0);
drm_kms_helper_poll_enable(dev);
enable_rpm_wakeref_asserts(dev_priv);
return 0;
}
static int i915_drm_suspend(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
pci_power_t opregion_target_state;
int error;
/* ignore lid events during suspend */
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_SUSPENDED;
mutex_unlock(&dev_priv->modeset_restore_lock);
disable_rpm_wakeref_asserts(dev_priv);
/* We do a lot of poking in a lot of registers, make sure they work
* properly. */
intel_display_set_init_power(dev_priv, true);
drm_kms_helper_poll_disable(dev);
pci_save_state(dev->pdev);
error = i915_gem_suspend(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
goto out;
}
intel_guc_suspend(dev);
intel_suspend_gt_powersave(dev);
intel_display_suspend(dev);
intel_dp_mst_suspend(dev);
intel_runtime_pm_disable_interrupts(dev_priv);
intel_hpd_cancel_work(dev_priv);
intel_suspend_encoders(dev_priv);
intel_suspend_hw(dev);
i915_gem_suspend_gtt_mappings(dev);
i915_save_state(dev);
opregion_target_state = suspend_to_idle(dev_priv) ? PCI_D1 : PCI_D3cold;
intel_opregion_notify_adapter(dev, opregion_target_state);
intel_uncore_forcewake_reset(dev, false);
intel_opregion_fini(dev);
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED, true);
dev_priv->suspend_count++;
intel_display_set_init_power(dev_priv, false);
if (HAS_CSR(dev_priv))
flush_work(&dev_priv->csr.work);
out:
enable_rpm_wakeref_asserts(dev_priv);
return error;
}
static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int error = 0;
intel_uncore_early_sanitize(dev);
intel_uncore_sanitize(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET) &&
restore_gtt_mappings) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
intel_power_domains_init_hw(dev);
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_init_pch_refclk(dev);
mutex_lock(&dev->struct_mutex);
error = i915_gem_init_hw(dev);
mutex_unlock(&dev->struct_mutex);
/* We need working interrupts for modeset enabling ... */
drm_irq_install(dev);
intel_modeset_init_hw(dev);
drm_modeset_lock_all(dev);
drm_mode_config_reset(dev);
intel_modeset_setup_hw_state(dev, true);
drm_modeset_unlock_all(dev);
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
* bother with the tiny race here where we might loose hotplug
* notifications.
* */
intel_hpd_init(dev);
dev_priv->enable_hotplug_processing = true;
/* Config may have changed between suspend and resume */
intel_resume_hotplug(dev);
}
intel_opregion_init(dev);
/*
* The console lock can be pretty contented on resume due
* to all the printk activity. Try to keep it out of the hot
* path of resume if possible.
*/
if (console_trylock()) {
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
console_unlock();
} else {
schedule_work(&dev_priv->console_resume_work);
}
/* Undo what we did at i915_drm_freeze so the refcount goes back to the
* expected level. */
hsw_enable_package_c8(dev_priv);
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_DONE;
mutex_unlock(&dev_priv->modeset_restore_lock);
intel_runtime_pm_put(dev_priv);
return error;
}
static int __i915_drm_thaw(struct drm_device *dev, bool restore_gtt_mappings)
{
struct drm_i915_private *dev_priv = dev->dev_private;
if (drm_core_check_feature(dev, DRIVER_MODESET) &&
restore_gtt_mappings) {
mutex_lock(&dev->struct_mutex);
i915_gem_restore_gtt_mappings(dev);
mutex_unlock(&dev->struct_mutex);
}
i915_restore_state(dev);
intel_opregion_setup(dev);
/* KMS EnterVT equivalent */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_init_pch_refclk(dev);
drm_mode_config_reset(dev);
mutex_lock(&dev->struct_mutex);
if (i915_gem_init_hw(dev)) {
DRM_ERROR("failed to re-initialize GPU, declaring wedged!\n");
atomic_set_mask(I915_WEDGED, &dev_priv->gpu_error.reset_counter);
}
mutex_unlock(&dev->struct_mutex);
intel_runtime_pm_restore_interrupts(dev);
intel_modeset_init_hw(dev);
{
unsigned long irqflags;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
if (dev_priv->display.hpd_irq_setup)
dev_priv->display.hpd_irq_setup(dev);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
intel_dp_mst_resume(dev);
drm_modeset_lock_all(dev);
intel_modeset_setup_hw_state(dev, true);
drm_modeset_unlock_all(dev);
/*
* ... but also need to make sure that hotplug processing
* doesn't cause havoc. Like in the driver load code we don't
* bother with the tiny race here where we might loose hotplug
* notifications.
* */
intel_hpd_init(dev);
/* Config may have changed between suspend and resume */
drm_helper_hpd_irq_event(dev);
}
intel_opregion_init(dev);
/*
* The console lock can be pretty contented on resume due
* to all the printk activity. Try to keep it out of the hot
* path of resume if possible.
*/
if (console_trylock()) {
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING);
console_unlock();
} else {
schedule_work(&dev_priv->console_resume_work);
}
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_DONE;
mutex_unlock(&dev_priv->modeset_restore_lock);
intel_opregion_notify_adapter(dev, PCI_D0);
return 0;
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
pci_power_t opregion_target_state;
/* ignore lid events during suspend */
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_SUSPENDED;
mutex_unlock(&dev_priv->modeset_restore_lock);
/* We do a lot of poking in a lot of registers, make sure they work
* properly. */
intel_display_set_init_power(dev_priv, true);
drm_kms_helper_poll_disable(dev);
pci_save_state(dev->pdev);
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error;
error = i915_gem_suspend(dev);
if (error) {
dev_err(&dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
/*
* Disable CRTCs directly since we want to preserve sw state
* for _thaw. Also, power gate the CRTC power wells.
*/
drm_modeset_lock_all(dev);
for_each_crtc(dev, crtc)
intel_crtc_control(crtc, false);
drm_modeset_unlock_all(dev);
intel_dp_mst_suspend(dev);
flush_delayed_work(&dev_priv->rps.delayed_resume_work);
intel_runtime_pm_disable_interrupts(dev);
intel_suspend_gt_powersave(dev);
intel_modeset_suspend_hw(dev);
}
i915_gem_suspend_gtt_mappings(dev);
i915_save_state(dev);
opregion_target_state = PCI_D3cold;
#if IS_ENABLED(CONFIG_ACPI_SLEEP)
if (acpi_target_system_state() < ACPI_STATE_S3)
opregion_target_state = PCI_D1;
#endif
intel_opregion_notify_adapter(dev, opregion_target_state);
intel_uncore_forcewake_reset(dev, false);
intel_opregion_fini(dev);
console_lock();
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
console_unlock();
dev_priv->suspend_count++;
intel_display_set_init_power(dev_priv, false);
return 0;
}
static int i915_drm_freeze(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_crtc *crtc;
intel_runtime_pm_get(dev_priv);
/* ignore lid events during suspend */
mutex_lock(&dev_priv->modeset_restore_lock);
dev_priv->modeset_restore = MODESET_SUSPENDED;
mutex_unlock(&dev_priv->modeset_restore_lock);
/* We do a lot of poking in a lot of registers, make sure they work
* properly. */
hsw_disable_package_c8(dev_priv);
intel_display_set_init_power(dev, true);
drm_kms_helper_poll_disable(dev);
#if 0
pci_save_state(dev->pdev);
#endif
/* If KMS is active, we do the leavevt stuff here */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
int error;
error = i915_gem_suspend(dev);
if (error) {
dev_err(dev->pdev->dev,
"GEM idle failed, resume might fail\n");
return error;
}
cancel_delayed_work_sync(&dev_priv->rps.delayed_resume_work);
drm_irq_uninstall(dev);
dev_priv->enable_hotplug_processing = false;
/*
* Disable CRTCs directly since we want to preserve sw state
* for _thaw.
*/
mutex_lock(&dev->mode_config.mutex);
list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
dev_priv->display.crtc_disable(crtc);
mutex_unlock(&dev->mode_config.mutex);
intel_modeset_suspend_hw(dev);
}
i915_gem_suspend_gtt_mappings(dev);
i915_save_state(dev);
intel_opregion_fini(dev);
#if 0
console_lock();
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED);
console_unlock();
#endif
return 0;
}
