/**
* ir_input_unregister() - unregisters IR and frees resources
* @input_dev: the struct input_dev descriptor of the device
* This routine is used to free memory and de-register interfaces.
*/
void ir_input_unregister(struct input_dev *input_dev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct ir_scancode_table *rc_tab;
if (!ir_dev)
return;
IR_dprintk(1, "Freed keycode table\n");
del_timer_sync(&ir_dev->timer_keyup);
if (ir_dev->props)
if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW)
ir_raw_event_unregister(input_dev);
rc_tab = &ir_dev->rc_tab;
rc_tab->size = 0;
kfree(rc_tab->scan);
rc_tab->scan = NULL;
ir_unregister_class(input_dev);
kfree(ir_dev->driver_name);
kfree(ir_dev);
}
/**
* __ir_input_register() - sets the IR keycode table and add the handlers
* for keymap table get/set
* @input_dev: the struct input_dev descriptor of the device
* @rc_tab: the struct ir_scancode_table table of scancode/keymap
*
* This routine is used to initialize the input infrastructure
* to work with an IR.
* It will register the input/evdev interface for the device and
* register the syfs code for IR class
*/
int __ir_input_register(struct input_dev *input_dev,
const struct ir_scancode_table *rc_tab,
struct ir_dev_props *props,
const char *driver_name)
{
struct ir_input_dev *ir_dev;
int rc;
if (rc_tab->scan == NULL || !rc_tab->size)
return -EINVAL;
ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
if (!ir_dev)
return -ENOMEM;
ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
if (!ir_dev->driver_name) {
rc = -ENOMEM;
goto out_dev;
}
input_dev->getkeycode = ir_getkeycode;
input_dev->setkeycode = ir_setkeycode;
input_set_drvdata(input_dev, ir_dev);
ir_dev->input_dev = input_dev;
spin_lock_init(&ir_dev->rc_tab.lock);
spin_lock_init(&ir_dev->keylock);
setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
ir_dev->rc_tab.name = rc_tab->name;
ir_dev->rc_tab.ir_type = rc_tab->ir_type;
ir_dev->rc_tab.alloc = roundup_pow_of_two(rc_tab->size *
sizeof(struct ir_scancode));
ir_dev->rc_tab.scan = kmalloc(ir_dev->rc_tab.alloc, GFP_KERNEL);
ir_dev->rc_tab.size = ir_dev->rc_tab.alloc / sizeof(struct ir_scancode);
if (props) {
ir_dev->props = props;
if (props->open)
input_dev->open = ir_open;
if (props->close)
input_dev->close = ir_close;
}
if (!ir_dev->rc_tab.scan) {
rc = -ENOMEM;
goto out_name;
}
IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
ir_dev->rc_tab.size, ir_dev->rc_tab.alloc);
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_REP, input_dev->evbit);
set_bit(EV_MSC, input_dev->evbit);
set_bit(MSC_SCAN, input_dev->mscbit);
if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
rc = -ENOMEM;
goto out_table;
}
rc = ir_register_class(input_dev);
if (rc < 0)
goto out_table;
if (ir_dev->props)
if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
rc = ir_raw_event_register(input_dev);
if (rc < 0)
goto out_event;
}
IR_dprintk(1, "Registered input device on %s for %s remote%s.\n",
driver_name, rc_tab->name,
(ir_dev->props && ir_dev->props->driver_type == RC_DRIVER_IR_RAW) ?
" in raw mode" : "");
/*
* Default delay of 250ms is too short for some protocols, expecially
* since the timeout is currently set to 250ms. Increase it to 500ms,
* to avoid wrong repetition of the keycodes.
*/
input_dev->rep[REP_DELAY] = 500;
return 0;
out_event:
ir_unregister_class(input_dev);
out_table:
kfree(ir_dev->rc_tab.scan);
out_name:
kfree(ir_dev->driver_name);
out_dev:
kfree(ir_dev);
return rc;
}
/**
* __ir_input_register() - sets the IR keycode table and add the handlers
* for keymap table get/set
* @input_dev: the struct input_dev descriptor of the device
* @rc_tab: the struct ir_scancode_table table of scancode/keymap
*
* This routine is used to initialize the input infrastructure
* to work with an IR.
* It will register the input/evdev interface for the device and
* register the syfs code for IR class
*/
int __ir_input_register(struct input_dev *input_dev,
const struct ir_scancode_table *rc_tab,
const struct ir_dev_props *props,
const char *driver_name)
{
struct ir_input_dev *ir_dev;
int rc;
if (rc_tab->scan == NULL || !rc_tab->size)
return -EINVAL;
ir_dev = kzalloc(sizeof(*ir_dev), GFP_KERNEL);
if (!ir_dev)
return -ENOMEM;
ir_dev->driver_name = kasprintf(GFP_KERNEL, "%s", driver_name);
if (!ir_dev->driver_name) {
rc = -ENOMEM;
goto out_dev;
}
input_dev->getkeycode = ir_getkeycode;
input_dev->setkeycode = ir_setkeycode;
input_set_drvdata(input_dev, ir_dev);
ir_dev->input_dev = input_dev;
spin_lock_init(&ir_dev->rc_tab.lock);
spin_lock_init(&ir_dev->keylock);
setup_timer(&ir_dev->timer_keyup, ir_timer_keyup, (unsigned long)ir_dev);
ir_dev->rc_tab.name = rc_tab->name;
ir_dev->rc_tab.ir_type = rc_tab->ir_type;
ir_dev->rc_tab.alloc = roundup_pow_of_two(rc_tab->size *
sizeof(struct ir_scancode));
ir_dev->rc_tab.scan = kmalloc(ir_dev->rc_tab.alloc, GFP_KERNEL);
ir_dev->rc_tab.size = ir_dev->rc_tab.alloc / sizeof(struct ir_scancode);
if (props) {
ir_dev->props = props;
if (props->open)
input_dev->open = ir_open;
if (props->close)
input_dev->close = ir_close;
}
if (!ir_dev->rc_tab.scan) {
rc = -ENOMEM;
goto out_name;
}
IR_dprintk(1, "Allocated space for %u keycode entries (%u bytes)\n",
ir_dev->rc_tab.size, ir_dev->rc_tab.alloc);
set_bit(EV_KEY, input_dev->evbit);
set_bit(EV_REP, input_dev->evbit);
if (ir_setkeytable(input_dev, &ir_dev->rc_tab, rc_tab)) {
rc = -ENOMEM;
goto out_table;
}
rc = ir_register_class(input_dev);
if (rc < 0)
goto out_table;
if (ir_dev->props)
if (ir_dev->props->driver_type == RC_DRIVER_IR_RAW) {
rc = ir_raw_event_register(input_dev);
if (rc < 0)
goto out_event;
}
IR_dprintk(1, "Registered input device on %s for %s remote.\n",
driver_name, rc_tab->name);
return 0;
out_event:
ir_unregister_class(input_dev);
out_table:
kfree(ir_dev->rc_tab.scan);
out_name:
kfree(ir_dev->driver_name);
out_dev:
kfree(ir_dev);
return rc;
}