void TIM2_IRQHandler(void) // Timer2 Interrupt Handler
{
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
(void) irsnd_ISR(); // call irmp ISR
(void) irmp_ISR();
// call other timer interrupt routines...
}
void interrupt high_priority high_isr(void)
{
if (TMR2IF)
{
TMR2IF = 0; // clear Timer 0 interrupt flag
irmp_ISR();
}
}
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* timer 15 update handler, called every 1/15000 sec
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
extern "C" void TIM1_BRK_TIM15_IRQHandler(void) {
// if irsnd_ISR not busy call irmp ISR
if (!irsnd_ISR()) {
irmp_ISR();
}
STM_EVAL_LEDToggle(LED7); // GREEN RIGHT
TIM_ClearITPendingBit(TIM15, TIM_IT_Update );
}
/*---------------------------------------------------------------------------------------------------------------------------------------------------
* timer 15 update handler, called every 1/15000 sec
*---------------------------------------------------------------------------------------------------------------------------------------------------
*/
extern "C" void TIM1_BRK_TIM15_IRQHandler(void) {
// if irsnd_ISR not busy call irmp ISR
if (!irsnd_ISR()) {
irmp_ISR();
}
BSP_LED_Toggle(LED_GREEN_2); // GREEN RIGHT
__HAL_TIM_CLEAR_FLAG(&TIM15Handle, TIM_IT_UPDATE);
}
void TIMER1_COMPA_vect(void) {
/* main functions for irmp
*/
irmp_ISR(); // call irmp ISR
if ((intCount++ % 512) == 0) {
ADCSRA |= (1 << ADSC);
//intCount = 0;
}
}
void interrupt isr(void)
{
TMR1=0xffff-_XTAL_FREQ/F_INTERRUPTS;
TMR1IF=0; // clear timer 1 interrupt
if (!irsnd_ISR())
{
irmp_ISR();
}
}
void TIM2_IRQHandler ( void )
{
TIM_ClearITPendingBit ( TIM2, TIM_IT_Update );
irmp_ISR ( ); // call irmp ISR
};
void irmp_timer(void)
{
irmp_ISR ();
}
void
Timer1IntHandler(void) // Timer1 Interrupt Handler
{
(void) irmp_ISR(); // call irmp ISR
// call other timer interrupt routines...
}
/*-------------------------------------------------------------------------------------------------------------------------------------------
* timer2 IRQ handler for IRMP, soft clock, dcf77, animations, several timeouts
*-------------------------------------------------------------------------------------------------------------------------------------------
*/
void
TIM2_IRQHandler (void)
{
static uint_fast16_t ldr_cnt;
static uint_fast16_t animation_cnt;
static uint_fast16_t clk_cnt;
static uint_fast16_t dcf77_cnt;
static uint_fast16_t net_time_cnt;
static uint_fast16_t eeprom_cnt;
static uint_fast16_t ds3231_cnt;
TIM_ClearITPendingBit(TIM2, TIM_IT_Update);
if (short_isr) // run this handler in short version
{
clk_cnt++;
if (clk_cnt == F_INTERRUPTS) // increment internal clock every second
{
clk_cnt = 0;
uptime++;
second++;
if (second == 60)
{
second = 0;
minute++;
show_time_flag = 1;
if (minute == 60)
{
minute = 0;
hour++;
if (hour == 24)
{
hour = 0;
wday++;
if (wday == 7)
{
wday = 0;
}
}
}
}
}
}
else
{ // no short version, run all
#if SAVE_RAM == 0
(void) irmp_ISR (); // call irmp ISR
#endif
if (uptime > 1)
{
ldr_cnt++;
if (ldr_cnt == F_INTERRUPTS / 4) // start LDR conversion every 1/4 seconds
{
ldr_conversion_flag = 1;
ldr_cnt = 0;
}
}
animation_cnt++;
if (animation_cnt == F_INTERRUPTS / 40) // set animation_flag every 1/40 of a second
{
animation_flag = 1;
animation_cnt = 0;
}
dcf77_cnt++;
if (dcf77_cnt == F_INTERRUPTS / 100) // set dcf77_flag every 1/100 of a second
{
dcf77_flag = 1;
dcf77_cnt = 0;
}
net_time_cnt++;
if (net_time_cnt == F_INTERRUPTS / 100) // set esp8266_ten_ms_tick every 1/100 of a second
{
esp8266_ten_ms_tick = 1;
net_time_cnt = 0;
}
eeprom_cnt++;
if (eeprom_cnt == F_INTERRUPTS / 1000) // set eeprom_ms_tick every 1/1000 of a second
{
eeprom_ms_tick = 1;
eeprom_cnt = 0;
}
clk_cnt++;
if (clk_cnt == F_INTERRUPTS) // increment internal clock every second
{
clk_cnt = 0;
uptime++;
second++;
ds3231_cnt++;
if (ds3231_cnt >= 70) // get rtc time every 70 seconds
{
ds3231_flag = 1;
ds3231_cnt = 0;
}
if (second == 60)
{
second = 0;
minute++;
show_time_flag = 1;
if (minute == 60)
{
minute = 0;
hour++;
if (hour == 24)
{
hour = 0;
wday++;
if (wday == 7)
{
wday = 0;
}
}
}
}
if (net_time_countdown)
{
net_time_countdown--;
if (net_time_countdown == 0) // net time update every 3800 minutes
{
net_time_flag = 1;
}
}
}
}
}
void Timer2IntHandler(void)
{
HWREG(TIMER2_BASE + TIMER_O_ICR) = TIMER_TIMA_TIMEOUT;
irmp_ISR();
}
/*****************************************
* Timer 5 Callback @10kHz
* - Used for: IR Remote sampling
*****************************************/
void UB_TIMER5_ISR_CallBack( void )
{
// routine for IR remote signal processing
irmp_ISR( UB_DigIn_Read( DIN_PA15 ) );
}
