/**
* ixgbe_init_ops_X540 - Inits func ptrs and MAC type
* @hw: pointer to hardware structure
*
* Initialize the function pointers and assign the MAC type for X540.
* Does not touch the hardware.
**/
s32 ixgbe_init_ops_X540(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
s32 ret_val;
DEBUGFUNC("ixgbe_init_ops_X540");
ret_val = ixgbe_init_phy_ops_generic(hw);
ret_val = ixgbe_init_ops_generic(hw);
/* EEPROM */
eeprom->ops.init_params = ixgbe_init_eeprom_params_X540;
eeprom->ops.read = ixgbe_read_eerd_X540;
eeprom->ops.read_buffer = ixgbe_read_eerd_buffer_X540;
eeprom->ops.write = ixgbe_write_eewr_X540;
eeprom->ops.write_buffer = ixgbe_write_eewr_buffer_X540;
eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X540;
eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X540;
eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X540;
/* PHY */
phy->ops.init = ixgbe_init_phy_ops_generic;
phy->ops.reset = NULL;
if (!ixgbe_mng_present(hw))
phy->ops.set_phy_power = ixgbe_set_copper_phy_power;
/* MAC */
mac->ops.reset_hw = ixgbe_reset_hw_X540;
mac->ops.enable_relaxed_ordering = ixgbe_enable_relaxed_ordering_gen2;
mac->ops.get_media_type = ixgbe_get_media_type_X540;
mac->ops.get_supported_physical_layer =
ixgbe_get_supported_physical_layer_X540;
mac->ops.read_analog_reg8 = NULL;
mac->ops.write_analog_reg8 = NULL;
mac->ops.start_hw = ixgbe_start_hw_X540;
mac->ops.get_san_mac_addr = ixgbe_get_san_mac_addr_generic;
mac->ops.set_san_mac_addr = ixgbe_set_san_mac_addr_generic;
mac->ops.get_device_caps = ixgbe_get_device_caps_generic;
mac->ops.get_wwn_prefix = ixgbe_get_wwn_prefix_generic;
mac->ops.get_fcoe_boot_status = ixgbe_get_fcoe_boot_status_generic;
mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X540;
mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X540;
mac->ops.disable_sec_rx_path = ixgbe_disable_sec_rx_path_generic;
mac->ops.enable_sec_rx_path = ixgbe_enable_sec_rx_path_generic;
/* RAR, Multicast, VLAN */
mac->ops.set_vmdq = ixgbe_set_vmdq_generic;
mac->ops.set_vmdq_san_mac = ixgbe_set_vmdq_san_mac_generic;
mac->ops.clear_vmdq = ixgbe_clear_vmdq_generic;
mac->ops.insert_mac_addr = ixgbe_insert_mac_addr_generic;
mac->rar_highwater = 1;
mac->ops.set_vfta = ixgbe_set_vfta_generic;
mac->ops.set_vlvf = ixgbe_set_vlvf_generic;
mac->ops.clear_vfta = ixgbe_clear_vfta_generic;
mac->ops.init_uta_tables = ixgbe_init_uta_tables_generic;
mac->ops.set_mac_anti_spoofing = ixgbe_set_mac_anti_spoofing;
mac->ops.set_vlan_anti_spoofing = ixgbe_set_vlan_anti_spoofing;
/* Link */
mac->ops.get_link_capabilities =
ixgbe_get_copper_link_capabilities_generic;
mac->ops.setup_link = ixgbe_setup_mac_link_X540;
mac->ops.setup_rxpba = ixgbe_set_rxpba_generic;
mac->ops.check_link = ixgbe_check_mac_link_generic;
mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE;
mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
/*
* FWSM register
* ARC supported; valid only if manageability features are
* enabled.
*/
mac->arc_subsystem_valid = (IXGBE_READ_REG(hw, IXGBE_FWSM) &
IXGBE_FWSM_MODE_MASK) ? TRUE : FALSE;
hw->mbx.ops.init_params = ixgbe_init_mbx_params_pf;
/* LEDs */
mac->ops.blink_led_start = ixgbe_blink_led_start_X540;
mac->ops.blink_led_stop = ixgbe_blink_led_stop_X540;
/* Manageability interface */
mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_generic;
mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic;
return ret_val;
}
/**
* ixgbe_init_ops_82598 - Inits func ptrs and MAC type
* @hw: pointer to hardware structure
*
* Initialize the function pointers and assign the MAC type for 82598.
* Does not touch the hardware.
**/
int32_t ixgbe_init_ops_82598(struct ixgbe_hw *hw)
{
struct ixgbe_mac_info *mac = &hw->mac;
struct ixgbe_phy_info *phy = &hw->phy;
int32_t ret_val;
ret_val = ixgbe_init_phy_ops_generic(hw);
ret_val = ixgbe_init_ops_generic(hw);
/* MAC */
#ifndef NO_82598_A0_SUPPORT
if (hw->revision_id == 0)
mac->ops.reset_hw = &ixgbe_reset_hw_rev_0_82598;
else
mac->ops.reset_hw = &ixgbe_reset_hw_82598;
#else
mac->ops.reset_hw = &ixgbe_reset_hw_82598;
#endif
mac->ops.get_media_type = &ixgbe_get_media_type_82598;
/* LEDs */
mac->ops.blink_led_start = &ixgbe_blink_led_start_82598;
mac->ops.blink_led_stop = &ixgbe_blink_led_stop_82598;
/* RAR, Multicast, VLAN */
mac->ops.set_vmdq = &ixgbe_set_vmdq_82598;
/* Flow Control */
mac->ops.setup_fc = &ixgbe_setup_fc_82598;
/* Call PHY identify routine to get the phy type */
phy->ops.identify(hw);
/* PHY Init */
switch (hw->phy.type) {
case ixgbe_phy_tn:
phy->ops.check_link = &ixgbe_check_phy_link_tnx;
phy->ops.get_firmware_version =
&ixgbe_get_phy_firmware_version_tnx;
break;
case ixgbe_phy_nl:
phy->ops.reset = &ixgbe_reset_phy_nl;
break;
default:
break;
}
/* Link */
mac->ops.check_link = &ixgbe_check_mac_link_82598;
if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
mac->ops.setup_link_speed =
&ixgbe_setup_copper_link_speed_82598;
mac->ops.get_link_capabilities =
&ixgbe_get_copper_link_capabilities_82598;
} else {
mac->ops.setup_link = &ixgbe_setup_mac_link_82598;
mac->ops.setup_link_speed = &ixgbe_setup_mac_link_speed_82598;
mac->ops.get_link_capabilities =
&ixgbe_get_link_capabilities_82598;
}
mac->mcft_size = 128;
mac->vft_size = 128;
mac->num_rar_entries = 16;
mac->max_tx_queues = 32;
mac->max_rx_queues = 64;
return IXGBE_SUCCESS;
}