static int kinetis_cdinterrupt(int irq, FAR void *context)
{
/* All of the work is done by kinetis_mediachange() */
kinetis_mediachange();
return OK;
}
int board_app_initialize(uintptr_t arg)
{
#ifdef NSH_HAVEMMCSD
int ret;
/* Configure GPIO pins.
*
* First CD power. The initial state will provide SD power.
*/
kinetis_pinconfig(GPIO_SD_CARDON); /* Applies power to the card */
/* Attached the card detect interrupt (but don't enable it yet) */
kinetis_pinconfig(GPIO_SD_CARDDETECT);
kinetis_pinirqattach(GPIO_SD_CARDDETECT, kinetis_cdinterrupt);
/* Mount the SDHC-based MMC/SD block driver */
/* First, get an instance of the SDHC interface */
syslog(LOG_INFO, "Initializing SDHC slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
g_nsh.sdhc = sdhc_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!g_nsh.sdhc)
{
syslog(LOG_ERR, "ERROR: Failed to initialize SDHC slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDHC interface to the MMC/SD driver */
syslog(LOG_INFO, "Bind SDHC to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, g_nsh.sdhc);
if (ret != OK)
{
syslog(LOG_ERR, "ERROR: Failed to bind SDHC to the MMC/SD driver: %d\n", ret);
return ret;
}
syslog(LOG_INFO, "Successfully bound SDHC to the MMC/SD driver\n");
/* Handle the initial card state */
kinetis_mediachange();
/* Enable CD interrupts to handle subsequent media changes */
kinetis_pinirqenable(GPIO_SD_CARDDETECT);
#endif
return OK;
}
int nsh_archinitialize(void)
{
#ifdef NSH_HAVEMMCSD
int ret;
/* Configure GPIO pins */
/* Attached the card detect interrupt (but don't enable it yet) */
kinetis_pinconfig(GPIO_SD_CARDDETECT);
kinetis_pinirqattach(GPIO_SD_CARDDETECT, kinetis_cdinterrupt);
/* Configure the write protect GPIO */
kinetis_pinconfig(GPIO_SD_WRPROTECT);
/* Mount the SDHC-based MMC/SD block driver */
/* First, get an instance of the SDHC interface */
message("nsh_archinitialize: Initializing SDHC slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
g_nsh.sdhc = sdhc_initialize(CONFIG_NSH_MMCSDSLOTNO);
if (!g_nsh.sdhc)
{
message("nsh_archinitialize: Failed to initialize SDHC slot %d\n",
CONFIG_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SDHC interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDHC to the MMC/SD driver, minor=%d\n",
CONFIG_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_NSH_MMCSDMINOR, g_nsh.sdhc);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SDHC to the MMC/SD driver: %d\n", ret);
return ret;
}
message("nsh_archinitialize: Successfully bound SDHC to the MMC/SD driver\n");
/* Handle the initial card state */
kinetis_mediachange();
/* Enable CD interrupts to handle subsequent media changes */
kinetis_pinirqenable(GPIO_SD_CARDDETECT);
#endif
return OK;
}
