int main(int argc,S*argv)
{
kinit();
args(argc,argv);
attend(); //loop on stdin/inet
R 0;
}
// Bootstrap processor starts running C code here.
int
main(int memsize)
{
mpinit(); // collect info about this machine
lapicinit(mpbcpu());
ksegment();
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
cprintf("cpus %p cpu %p\n", cpus, cpu);
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
cprintf("mem: %d kb\n", memsize);
kinit(memsize); // physical memory allocator
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
pageinit(); // enable paging
userinit(); // first user process
bootothers(); // start other processors
// Finish setting up this processor in mpmain.
mpmain();
}
// Bootstrap processor starts running C code here.
// Allocate a real stack and switch to it, first
// doing some setup required for memory allocator to work.
int
main(void)
{
kvmalloc(); // kernel page table
mpinit(); // collect info about this machine
lapicinit(mpbcpu());
seginit(); // set up segments
cprintf("\ncpu%d: starting xv6\n\n", cpu->id);
picinit(); // interrupt controller
ioapicinit(); // another interrupt controller
consoleinit(); // I/O devices & their interrupts
uartinit(); // serial port
pinit(); // process table
tvinit(); // trap vectors
binit(); // buffer cache
fileinit(); // file table
iinit(); // inode cache
ideinit(); // disk
if(!ismp)
timerinit(); // uniprocessor timer
startothers(); // start other processors (must come before kinit)
kinit(); // initialize memory allocator
userinit(); // first user process (must come after kinit)
// Finish setting up this processor in mpmain.
mpmain();
}
/*
* get command line flags, initialize keywords & traps.
* get values from environment.
* set $pid, $cflag, $*
* fabricate bootstrap code and start it (*=(argv);. /usr/lib/rcmain $*)
* start interpreting code
*/
int
main(int argc, char *argv[])
{
code bootstrap[32];
char num[12], *rcmain;
int i;
/* needed for rcmain later */
putenv("PLAN9", unsharp("#9"));
argc = getflags(argc, argv, "ftjSsrdiIlxepvVc:1m:1[command]", 1);
if(argc==-1)
usage("[file [arg ...]]");
if(argv[0][0]=='-')
flag['l'] = flagset;
if(flag['I'])
flag['i'] = 0;
else if(flag['i']==0 && argc==1 && Isatty(0)) flag['i'] = flagset;
rcmain = flag['m'] ? flag['m'][0] : Rcmain();
err = openfd(2);
kinit();
Trapinit();
Vinit();
inttoascii(num, mypid = getpid());
pathinit();
setvar("pid", newword(num, (word *)0));
setvar("cflag", flag['c']?newword(flag['c'][0], (word *)0)
:(word *)0);
setvar("rcname", newword(argv[0], (word *)0));
i = 0;
bootstrap[i++].i = 1;
bootstrap[i++].f = Xmark;
bootstrap[i++].f = Xword;
bootstrap[i++].s="*";
bootstrap[i++].f = Xassign;
bootstrap[i++].f = Xmark;
bootstrap[i++].f = Xmark;
bootstrap[i++].f = Xword;
bootstrap[i++].s="*";
bootstrap[i++].f = Xdol;
bootstrap[i++].f = Xword;
bootstrap[i++].s = rcmain;
bootstrap[i++].f = Xword;
bootstrap[i++].s=".";
bootstrap[i++].f = Xsimple;
bootstrap[i++].f = Xexit;
bootstrap[i].i = 0;
start(bootstrap, 1, (var *)0);
/* prime bootstrap argv */
pushlist();
argv0 = strdup(argv[0]);
for(i = argc-1;i!=0;--i) pushword(argv[i]);
for(;;){
if(flag['r'])
pfnc(err, runq);
runq->pc++;
(*runq->code[runq->pc-1].f)();
if(ntrap)
dotrap();
}
}
void init_kernel()
{
terminal_initialize();
init_serial(COM1);
terminal_enable_serial_echo(COM1);
terminal_printf("fOS version %s\n\n\n", KERNEL_VERSION);
kinit(end + 4096, end + 4096 + (100 * 4096));
init_gdt();
load_gdt();
load_idt();
load_isrs();
irq_install();
asm volatile ( "sti" );
timer_install();
sleep(1);
keyboard_install();
init_paging();
switch_to_paging();
}
K ksk(S s, K x)
{
K z;
K y;
if (!*s) { kinit(); R 0; }
y = X(s);
if (!x) R y;
//z = dv_ex(0, KV(z)[2], x) : z;
R y;
}
void x86_64_start_kernel(char * real_mode_data)
{
extern void kinit();
clear_bss(); /* must be the first thing in C and must not depend on .bss to be zero */
early_printk("booting amd64 k42...\n");
copy_bootdata(real_mode_data);
setup_boot_cpu_data();
pda_init(0);
kinit();
}
/**
* Bootstrap processor starts running C code here.
*/
int main(void)
{
/**
* ld会生成如下几个变量用来标识程序的段
*
* _etext(etext) 正文段结束后第一个地址
* _edata(edata) 数据段结束后第一个地址
* _end(end) bss段结束后第一个地址
*/
extern char edata[], end[];
// clear BSS
memset(edata, 0, end - edata);
// collect info about this machine
mp_init();
lapic_init(mp_bcpu());
cprintf("\ncpu%d: starting myos\n\n", cpu());
cprintf("Welcome to myos !\n");
pinit(); // process table
binit(); // buffer cache
pic_init(); // interrupt controller
ioapic_init(); // another interrupt controller
kinit(); // physical memory allocator
tvinit(); // trap vectors
fileinit(); // file table
iinit(); // inode cache
console_init(); // I/O devices & their interrupts
ide_init(); // disk
if(!ismp)
timer_init(); // uniprocessor timer
userinit(); // first user process
bootothers(); // start other processors
// Finish setting up this processor in mpmain.
mpmain();
}
int main(int argc, char **argv)
{
double t=0, t0;
int c;
time_t now=time(NULL);
struct tm date=*localtime(&now);
kinit();
STARTDATE=caltoj( date.tm_year+1900, date.tm_mon+1, date.tm_mday );
ENDDATE=caltoj( date.tm_year+1900+1, date.tm_mon+1, date.tm_mday );
while (1) {
int option_index = 0;
static struct option long_options[] = {
{"start", 1, 0, 's'},
{"end", 1, 0, 'e'},
{"spring", 0, 0, 'V'},
{"vernal", 0, 0, 'V'},
{"summer", 0, 0, 'S'},
{"autumn", 0, 0, 'A'},
{"fall", 0, 0, 'A'},
{"winter", 0, 0, 'W'},
{"newmoon", 0, 0, 'N'},
{"fullmoon", 0, 0, 'F'},
{"help", 0, 0, 'h'},
{0, 0, 0, 0}
};
c = getopt_long (argc, argv, "s:e:VSAWNFh",
long_options, &option_index);
if (c == -1)
break;
switch (c) {
case 's':
if (strptime(optarg, "%Y-%m-%d", &date))
STARTDATE=caltoj( date.tm_year+1900, date.tm_mon+1, date.tm_mday );
else
STARTDATE=atof(optarg);
break;
case 'e':
if (strptime(optarg, "%Y-%m-%d", &date))
ENDDATE=caltoj( date.tm_year+1900, date.tm_mon+1, date.tm_mday );
else
ENDDATE=atof(optarg);
break;
case 'V': event=SPRING; break;
case 'S': event=SUMMER; break;
case 'A': event=AUTUMN; break;
case 'W': event=WINTER; break;
case 'N': event=NEWMOON; break;
case 'F': event=FULLMOON; break;
case 'h':
default:
printf("conjunct - find dates of equinox or new/full moon\n"
"options:\n"
" -s, --start DATE Julian or ISO 8601 starting date (default today)\n"
" -e, --end DATE ending date (default 1 year from today)\n"
" -V, --vernal find times of spring equinox\n"
" -S, --summer find times of summer solstice\n"
" -A, --autumn find times of autumn equinox\n"
" -W, --winter find times of winter solstice\n"
" -F, --fullmoon find times of full moon\n"
" -N, --newmoon find times of new moon (default)\n");
exit(0);
break;
}
}
if (STARTDATE >= ENDDATE)
{
printf("start date=%f >= end date=%f\n", STARTDATE, ENDDATE);
exit(1);
}
objnum = 0;
// printf("184:STARTDATE=%6.1f\n", STARTDATE);
t0 = STARTDATE - (((event==FULLMOON)||(event==NEWMOON))?40:400);
while( 1 )
{
prtflg = 0;
switch(event)
{
case SPRING:
t = search( t0, 0.0, 364.0 );
break;
case AUTUMN:
t = search( t0, PI, 364.0 );
break;
case WINTER:
t = search( t0, -PI/2, 364.0 );
break;
case SUMMER:
t = search( t0, PI/2, 364.0 );
break;
case NEWMOON:
t = search( t0, 0.0, 27.0 );
break;
case FULLMOON:
t = search( t0, PI, 27.0 );
break;
}
TDT = t;
if (t > ENDDATE)
break;
if (t >= STARTDATE)
{
printf("%.4f ", t);
prtflg = 1;
jtocal(t);
}
t0 = t;
}
exit(0);
}
void main() {
print_str("Start Initializing...", 'A');
kinit();
while(1) { }
}
void
main(int argc, char *argv[])
{
Dir *db;
Lsym *l;
Node *n;
char buf[128], *s;
int pid, i;
char *p;
char afile[512];
argv0 = argv[0];
pid = 0;
aout = "v.out";
quiet = 1;
/* turn off all debugging */
protodebug = 0;
mtype = 0;
ARGBEGIN{
case 'm':
mtype = ARGF();
break;
case 'w':
wtflag = 1;
break;
case 'l':
s = ARGF();
if(s == 0)
usage();
lm[nlm++] = s;
break;
case 'd':
p = ARGF();
if (p == 0)
usage();
while (*p) {
setdbg_opt(*p, 0); /* don't print set message */
p++;
}
break;
case 'k':
kernel++;
break;
case 'q':
quiet = 0;
break;
case 'r':
pid = 1;
remote++;
kernel++;
break;
case 'R':
pid = 1;
rdebug++;
s = ARGF();
if(s == 0)
usage();
remfd = opentty(s, 0);
if(remfd < 0){
fprint(2, "acid: can't open %s: %r\n", s);
exits("open");
}
break;
default:
usage();
}ARGEND
if(argc > 0) {
if(remote || rdebug)
aout = argv[0];
else
if(isnumeric(argv[0])) {
pid = atoi(argv[0]);
sprint(prog, "/proc/%d/text", pid);
aout = prog;
if(argc > 1)
aout = argv[1];
else if(kernel)
aout = mysystem();
}
else {
if(kernel) {
print("-k requires a pid");
kernel = 0;
}
aout = argv[0];
}
} else if(rdebug)
aout = "/386/bpc";
else if(remote)
aout = "/mips/bcarrera";
fmtinstall('x', xfmt);
fmtinstall('L', Lfmt);
fmtinstall('f', gfltconv);
fmtinstall('F', gfltconv);
fmtinstall('g', gfltconv);
fmtinstall('G', gfltconv);
fmtinstall('e', gfltconv);
fmtinstall('E', gfltconv);
Binit(&bioout, 1, OWRITE);
bout = &bioout;
kinit();
initialising = 1;
pushfile(0);
loadvars();
installbuiltin();
if(mtype && machbyname(mtype) == 0)
print("unknown machine %s", mtype);
if (attachfiles(aout, pid) < 0)
varreg(); /* use default register set on error */
acidlib = getenv("ACIDLIB");
if(acidlib == nil){
p = getenv("ROOT");
if(p == nil)
p = "/usr/inferno";
snprint(afile, sizeof(afile)-1, "%s/lib/acid", p);
acidlib = strdup(afile);
}
snprint(afile, sizeof(afile)-1, "%s/port", acidlib);
loadmodule(afile);
for(i = 0; i < nlm; i++) {
if((db = dirstat(lm[i])) != nil) {
free(db);
loadmodule(lm[i]);
} else {
sprint(buf, "%s/%s", acidlib, lm[i]);
loadmodule(buf);
}
}
userinit();
varsym();
l = look("acidmap");
if(l && l->proc) {
n = an(ONAME, ZN, ZN);
n->sym = l;
n = an(OCALL, n, ZN);
execute(n);
}
interactive = 1;
initialising = 0;
line = 1;
setup_os_notify();
for(;;) {
if(setjmp(err)) {
Binit(&bioout, 1, OWRITE);
unwind();
}
stacked = 0;
Bprint(bout, "acid: ");
if(yyparse() != 1)
die();
restartio();
unwind();
}
/* not reached */
}
void
main(int argc, char *argv[])
{
Lsym *l;
Node *n;
char *s;
int pid, i;
argv0 = argv[0];
pid = 0;
aout = "8.out";
quiet = 1;
mtype = 0;
ARGBEGIN{
case 'm':
mtype = EARGF(usage());
break;
case 'w':
wtflag = 1;
break;
case 'l':
s = EARGF(usage());
lm[nlm++] = s;
break;
case 'k':
kernel++;
break;
case 'q':
quiet = 0;
break;
case 'r':
pid = 1;
remote++;
kernel++;
break;
default:
usage();
}ARGEND
if(argc > 0) {
if(remote)
aout = argv[0];
else
if(isnumeric(argv[0])) {
pid = strtol(argv[0], 0, 0);
snprint(prog, sizeof(prog), "/proc/%d/text", pid);
aout = prog;
if(argc > 1)
aout = argv[1];
else if(kernel)
aout = system();
}
else {
if(kernel) {
fprint(2, "acid: -k requires a pid\n");
usage();
}
aout = argv[0];
}
} else
if(remote)
aout = "/mips/9ch";
fmtinstall('x', xfmt);
fmtinstall('L', Lfmt);
Binit(&bioout, 1, OWRITE);
bout = &bioout;
kinit();
initialising = 1;
pushfile(0);
loadvars();
installbuiltin();
if(mtype && machbyname(mtype) == 0)
print("unknown machine %s", mtype);
if (attachfiles(aout, pid) < 0)
varreg(); /* use default register set on error */
loadmodule("/sys/lib/acid/port");
loadmoduleobjtype();
for(i = 0; i < nlm; i++) {
if(access(lm[i], AREAD) >= 0)
loadmodule(lm[i]);
else {
s = smprint("/sys/lib/acid/%s", lm[i]);
loadmodule(s);
free(s);
}
}
userinit();
varsym();
l = look("acidmap");
if(l && l->proc) {
n = an(ONAME, ZN, ZN);
n->sym = l;
n = an(OCALL, n, ZN);
execute(n);
}
interactive = 1;
initialising = 0;
line = 1;
notify(catcher);
for(;;) {
if(setjmp(err)) {
Binit(&bioout, 1, OWRITE);
unwind();
}
stacked = 0;
Bprint(bout, "acid: ");
if(yyparse() != 1)
die();
restartio();
unwind();
}
/* not reached */
}
void kmain(multiboot_info_t* mbd, unsigned int magic ) {
if ( magic != 0x2BADB002 ) {
// TODO: Hacer un kputs.
kprint ( "Warning: No se inicializo con GRUB, intentando de todas formas.\n" );
}
//Primero tenemos que corregir mbd para que sea una direccion virtual valida
mbd = (multiboot_info_t*)( PA2KVA( (uint32_t) mbd) );
//Ahora si, usando mbd que apunta bien a los datos del grub, inicializamos todo
kinit( mbd );
kprint("llego\n");
key_init();
//Aca asigna Esc a la funcion menu
key_register(menu, 1);
//Seteo Fs
key_register(mostrar_slot,59);
key_register(mostrar_slot,60);
key_register(mostrar_slot,61);
key_register(mostrar_slot,62);
key_register(mostrar_slot,63);
key_register(mostrar_slot,64);
key_register(mostrar_slot,65);
key_register(mostrar_slot,66);
key_register(mostrar_slot,67);
kprint("binding keys done\n");
if(tty_init(&tty_kernel, menu_in)) {
panic("fallo el inicio de las tty");
}
//Lanzamos programa para cargar tareas y modificar quantums.
set_isr_handler( 14, &pf ); // #PF
// El idle task... siempre listo... :-)
programs_t idle;
idle.va_entry = idletask;
crear_kthread( &idle, 10 );
//Iniciamos Scheduler
iniciar_scheduler();
extern unsigned char ej1[];
extern unsigned char ej2[];
extern unsigned char ej3[];
extern unsigned char ej4[];
programas[0] = (programs_t *) ej1;
programas[1]= (programs_t *) ej2;
programas[2] = (programs_t *) ej3;
programas[3]= (programs_t *) ej4;
programas[4]= (programs_t *) ej1;
set_irq_handler( 0, &timer );
set_irq_handler( 1, &irq_keyboard );
menu(1);
sti();
//Lanzamos programa menu
while(1);
}
int
main(int argc, char *argv[])
{
int fd;
char *p;
ARGBEGIN{
case 'C':
dontcompile++;
break;
case 'c':
mustcompile++;
break;
case 'l':
listing++;
break;
default:
usage();
}ARGEND;
fmtinstall('i', iconv);
fmtinstall('a', aconv);
kinit();
pcentry = -1;
dentry = -1;
if(argc != 1)
usage();
file = argv[0];
bin = Bopen(file, OREAD);
if(bin == 0) {
nerr++;
print("open: %s: %r\n", file);
exits("errors");
}
p = strrchr(file, '/');
if(p == nil)
p = file;
else
p++;
ofile = mkfile(p, ".s", ".dis");
fd = create(ofile, OWRITE, 0666);
if(fd < 0) {
nerr++;
print("can't create: %s: %r\n", ofile);
exits("errors");
}
Binit(&output, fd, OWRITE);
bout = &output;
line = 1;
yyparse();
Bterm(bin);
Bterm(bout);
close(fd);
if(nerr != 0){
remove(ofile);
exits("errors");
}
exits(0);
return 0;
}
