module_t *module_add_node(moduleid_t id, cnodeid_t n)
{
module_t *m;
int i;
DPRINTF("module_add_node: id=%x node=%d\n", id, n);
if ((m = module_lookup(id)) == 0) {
#ifndef CONFIG_IA64_SGI_IO
m = kmem_zalloc_node(sizeof (module_t), KM_NOSLEEP, n);
#else
m = kmalloc(sizeof (module_t), GFP_KERNEL);
memset(m, 0 , sizeof(module_t));
printk("Module nodecnt = %d\n", m->nodecnt);
#endif
ASSERT_ALWAYS(m);
DPRINTF("module_add_node: m=0x%p\n", m);
m->id = id;
spin_lock_init(&m->lock);
init_MUTEX_LOCKED(&m->thdcnt);
printk("Set elsc to 0x%p on node %d\n", &m->elsc, get_nasid());
set_elsc(&m->elsc);
elsc_init(&m->elsc, COMPACT_TO_NASID_NODEID(n));
spin_lock_init(&m->elsclock);
/* Insert in sorted order by module number */
for (i = nummodules; i > 0 && modules[i - 1]->id > id; i--)
modules[i] = modules[i - 1];
modules[i] = m;
nummodules++;
}
m->nodes[m->nodecnt++] = n;
printk("module_add_node: module %x now has %d nodes\n", id, m->nodecnt);
DPRINTF("module_add_node: module %x now has %d nodes\n", id, m->nodecnt);
return m;
}
module_t *module_add_node(moduleid_t id, cnodeid_t n)
{
module_t *m;
int i;
char buffer[16];
#ifdef __ia64
memset(buffer, 0, 16);
format_module_id(buffer, id, MODULE_FORMAT_BRIEF);
DPRINTF("module_add_node: id=%s node=%d\n", buffer, n);
#endif
if ((m = module_lookup(id)) == 0) {
#ifdef LATER
m = kmem_zalloc_node(sizeof (module_t), KM_NOSLEEP, n);
#else
m = kmalloc(sizeof (module_t), GFP_KERNEL);
memset(m, 0 , sizeof(module_t));
#endif
ASSERT_ALWAYS(m);
m->id = id;
spin_lock_init(&m->lock);
mutex_init_locked(&m->thdcnt);
// set_elsc(&m->elsc);
elsc_init(&m->elsc, COMPACT_TO_NASID_NODEID(n));
spin_lock_init(&m->elsclock);
/* Insert in sorted order by module number */
for (i = nummodules; i > 0 && modules[i - 1]->id > id; i--)
modules[i] = modules[i - 1];
modules[i] = m;
nummodules++;
}
m->nodes[m->nodecnt++] = n;
DPRINTF("module_add_node: module %s now has %d nodes\n", buffer, m->nodecnt);
return m;
}
void
hub_error_init(cnodeid_t cnode)
{
nasid_t nasid;
nasid = cnodeid_to_nasid(cnode);
hub_error_clear(nasid);
#ifdef ajm
if (cnode == 0) {
/*
* Allocate log for storing the node specific error info
*/
for (i = 0; i < numnodes; i++) {
kl_error_log[i] = kmem_zalloc_node(sizeof(sn0_error_log_t),
KM_NOSLEEP, i);
hub_err_count[i] = kmem_zalloc_node(sizeof(hub_errcnt_t),
VM_DIRECT | KM_NOSLEEP, i);
ASSERT_ALWAYS(kl_error_log[i] && hub_err_count[i]);
}
}
/*
* Assumption: There will be only one cpu who will initialize
* a hub. we need to setup the ii and each pi error interrupts.
* The SN1 hub (bedrock) has two PI, one for up to two processors.
*/
if (cpuid_to_cnodeid(smp_processor_id()) == cnode) {
int generic_intr_mask = PI_ERR_GENERIC; /* These interrupts are sent to only 1 CPU per NODE */
ASSERT_ALWAYS(kl_error_log[cnode]);
ASSERT_ALWAYS(hub_err_count[cnode]);
MD_ERR_LOG_INIT(kl_error_log[cnode]);
/* One for each CPU */
recover_error_init(RECOVER_ERROR_TABLE(cnode, 0));
recover_error_init(RECOVER_ERROR_TABLE(cnode, 1));
recover_error_init(RECOVER_ERROR_TABLE(cnode, 2));
recover_error_init(RECOVER_ERROR_TABLE(cnode, 3));
/*
* Setup error intr masks.
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
int cpuA_present = REMOTE_HUB_PI_L(nasid, sn, PI_CPU_ENABLE_A);
int cpuB_present = REMOTE_HUB_PI_L(nasid, sn, PI_CPU_ENABLE_B);
if (cpuA_present) {
if (cpuB_present) { /* A && B */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A,
(PI_FATAL_ERR_CPU_B | PI_MISC_ERR_CPU_A|generic_intr_mask));
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B,
(PI_FATAL_ERR_CPU_A | PI_MISC_ERR_CPU_B));
} else { /* A && !B */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A,
(PI_FATAL_ERR_CPU_A | PI_MISC_ERR_CPU_A|generic_intr_mask));
}
generic_intr_mask = 0;
} else {
if (cpuB_present) { /* !A && B */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B,
(PI_FATAL_ERR_CPU_B | PI_MISC_ERR_CPU_B|generic_intr_mask));
generic_intr_mask = 0;
} else { /* !A && !B */
/* nothing to set up */
}
}
}
/*
* Turn off UNCAC_UNCORR interrupt in the masks. Anyone interested
* in these errors will peek at the int pend register to see if its
* set.
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
misc = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_INT_MASK_A);
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A, (misc & ~PI_ERR_UNCAC_UNCORR_A));
misc = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_INT_MASK_B);
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B, (misc & ~PI_ERR_UNCAC_UNCORR_B));
}
/*
* enable all error indicators to turn on, in case of errors.
*
* This is not good on single cpu node boards.
**** LOCAL_HUB_S(PI_SYSAD_ERRCHK_EN, PI_SYSAD_CHECK_ALL);
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STATUS1_A_CLR, 0);
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STATUS1_B_CLR, 0);
}
/* Set up stack for each present processor */
for(sn=0; sn<NUM_SUBNODES; sn++) {
if (REMOTE_HUB_PI_L(nasid, sn, PI_CPU_PRESENT_A)) {
SN0_ERROR_LOG(cnode)->el_spool_cur_addr[0] =
SN0_ERROR_LOG(cnode)->el_spool_last_addr[0] =
REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_A);
}
if (REMOTE_HUB_PI_L(nasid, sn, PI_CPU_PRESENT_B)) {
SN0_ERROR_LOG(cnode)->el_spool_cur_addr[1] =
SN0_ERROR_LOG(cnode)->el_spool_last_addr[1] =
REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_B);
}
}
PI_SPOOL_SIZE_BYTES =
ERR_STACK_SIZE_BYTES(REMOTE_HUB_L(nasid, PI_ERR_STACK_SIZE));
#ifdef BRINGUP
/* BRINGUP: The following code looks like a check to make sure
the prom set up the error spool correctly for 2 processors. I
don't think it is needed. */
for(sn=0; sn<NUM_SUBNODES; sn++) {
if (REMOTE_HUB_PI_L(nasid, sn, PI_CPU_PRESENT_B)) {
__psunsigned_t addr_a = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_A);
__psunsigned_t addr_b = REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_B);
if ((addr_a & ~0xff) == (addr_b & ~0xff)) {
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_STACK_ADDR_B,
addr_b + PI_SPOOL_SIZE_BYTES);
SN0_ERROR_LOG(cnode)->el_spool_cur_addr[1] =
SN0_ERROR_LOG(cnode)->el_spool_last_addr[1] =
REMOTE_HUB_PI_L(nasid, sn, PI_ERR_STACK_ADDR_B);
}
}
}
#endif /* BRINGUP */
/* programming our own hub. Enable error_int_pend intr.
* If both present, CPU A takes CPU b's error interrupts and any
* generic ones. CPU B takes CPU A error ints.
*/
if (cause_intr_connect (SRB_ERR_IDX,
(intr_func_t)(hubpi_eint_handler),
SR_ALL_MASK|SR_IE)) {
cmn_err(ERR_WARN,
"hub_error_init: cause_intr_connect failed on %d", cnode);
}
}
else {
/* programming remote hub. The only valid reason that this
* is called will be on headless hubs. No interrupts
*/
for(sn=0; sn<NUM_SUBNODES; sn++) {
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_A, 0); /* not necessary */
REMOTE_HUB_PI_S(nasid, sn, PI_ERR_INT_MASK_B, 0); /* not necessary */
}
}
#endif /* ajm */
/*
* Now setup the hub ii and ni error interrupt handler.
*/
hubii_eint_init(cnode);
hubni_eint_init(cnode);
#ifdef ajm
/*** XXX FIXME XXX resolve the following***/
/* INT_PEND1 bits set up for one hub only:
* SHUTDOWN_INTR
* MD_COR_ERR_INTR
* COR_ERR_INTR_A and COR_ERR_INTR_B should be sent to the
* appropriate CPU only.
*/
if (cnode == 0) {
error_consistency_check.eps_state = 0;
error_consistency_check.eps_cpuid = -1;
spinlock_init(&error_consistency_check.eps_lock, "error_dump_lock");
}
#endif
nodepda->huberror_ticks = HUB_ERROR_PERIOD;
return;
}
