void kernel_err_report(const char* err_report_title,const char* err_report_detail,const char* error_fix_advise) {
/*
_______________________________
| |
| REPORT TITLE(Line3-4) |
| |
| REPORT DETAIL(Line6-8) |
| |
| ERROR FIX ADVISE(Line10-12) |
| |
|_______________________________|
*/
#define REPORT_TITLE_LINE 3
#define REPORT_DETAIL_LINE 6
#define ERROR_FIX_ADVISE_LINE 10
long err_report_data_length=strlen(err_report_title);
char err_report_data_line[MAX_COLUMN_LONGITUDINAL];
int error_report_print_control=0;
int print_crlf_index=1;
lcd_background(blue);
lcd_print_clean();
for (;print_crlf_index<REPORT_TITLE_LINE;++print_crlf_index)
lcd_print_crlf();
for (;err_report_data_length>0;err_report_data_length-=(MAX_COLUMN_LONGITUDINAL-1),++print_crlf_index,++error_report_print_control) {
memcpy(err_report_data_line,(const void*)((long)err_report_title+error_report_print_control*(MAX_COLUMN_LONGITUDINAL-1)),MAX_COLUMN_LONGITUDINAL-1);
lcd_print_line(err_report_data_line);
memset(err_report_data_line,0,MAX_COLUMN_LONGITUDINAL);
}
for (;print_crlf_index<REPORT_DETAIL_LINE;++print_crlf_index)
lcd_print_crlf();
for (err_report_data_length=strlen(err_report_detail),error_report_print_control=0;err_report_data_length>0;err_report_data_length-=(MAX_COLUMN_LONGITUDINAL-1),++print_crlf_index,++error_report_print_control) {
memcpy(err_report_data_line,(const void*)((long)err_report_detail+error_report_print_control*(MAX_COLUMN_LONGITUDINAL-1)),MAX_COLUMN_LONGITUDINAL-1);
lcd_print_line(err_report_data_line);
memset(err_report_data_line,0,MAX_COLUMN_LONGITUDINAL);
}
for (;print_crlf_index<ERROR_FIX_ADVISE_LINE;++print_crlf_index)
lcd_print_crlf();
for (err_report_data_length=strlen(error_fix_advise),error_report_print_control=0;err_report_data_length>0;err_report_data_length-=(MAX_COLUMN_LONGITUDINAL-1),++print_crlf_index,++error_report_print_control) {
memcpy(err_report_data_line,(const void*)((long)error_fix_advise+error_report_print_control*(MAX_COLUMN_LONGITUDINAL-1)),MAX_COLUMN_LONGITUDINAL-1);
lcd_print_line(err_report_data_line);
memset(err_report_data_line,0,MAX_COLUMN_LONGITUDINAL);
}
}
void main(void) {
unsigned char keys;
static bit disp_choice;
unsigned char t_hour = 15,t_min=45; /*TODO criar struct em RTC.h*/
#ifdef _18F2620
/* Configure the oscillator for the device */
ConfigureOscillator();
#endif
/* Initialize I/O and Peripherals for application */
InitApp();
CLRWDT();
power_heat1 = 0;
power_heat2 = 0; // No heatelement activated
menu_item = 0;
sprintf(str_buf, mensagens_main[Forno]);
printstr_rs232(str_buf);//"Forno SMD v1.0\n\r");
sprintf(str_buf, mensagens_main[Forno1]);
lcd_print_line(str_buf, 0);//"Forno SMD v1.0", 0);
sprintf(str_buf, mensagens_main[Inicializando]);
lcd_print_line(str_buf, 1);//" Inicializando", 1);
Buzzer_stat = 1;
for (keys = 50; keys != 0; keys--)
wait_1ms();
Buzzer_stat = 0;
sprintf(str_buf, mensagens_main[Forno_SMD]);
printstr_rs232(str_buf);//"\n\r\n\rForno SMD\n\r");
if (is_24c1024_present() == 0) {
sprintf(str_buf, mensagens_main[FALHA]);
lcd_print_line(str_buf, 0);//"FALHA DA EEPROM!", 0);
sprintf(str_buf, mensagens_main[troque]);
lcd_print_line(str_buf, 1);//"troque o 24c1024", 1);
while ((keys_get() & KEY_ENTER) == 0) {
}
};
tmp_log = 0; // Switch off the log-function to preserve EEPROM
oven_overshoot = read_byte_24c1024(0x00); // Read the calibration-value
keys = ~read_byte_24c1024(0x01);
if ( oven_overshoot != keys){ // Check if it is ok.
sprintf(str_buf, mensagens_main[Calibracao]);
lcd_print_line(str_buf, 0);//"Calibracao", 0); //Else start the calibration-procedure
sprintf(str_buf, mensagens_main[ENT]);
lcd_print_line(str_buf, 1);//"[ENT] inicia", 1);
while ((keys_get() & KEY_ENTER) == 0) {
}
calibrate();
}
read_buffer_24c1024(PROFILES_START_ADR,
(unsigned char*) &perfil.profile, sizeof (perfil.profile));
disp_choice = 1;
sprintf(str_buf, mensagens_main[DINST]);
lcd_print_line(str_buf, 0);//"DINST SMD-OVEN", 0);
menu_item = MENU_MIN;
while (true) {
keys = keys_get(); // get key-status
if (keys & KEY_RIGHT) ++menu_item;
if (keys & KEY_LEFT) --menu_item;
if (menu_item > MENU_MAX) menu_item = MENU_MIN;
if (menu_item < MENU_MIN) menu_item = MENU_MAX;
if (keys != 0) disp_choice = 1;
if (disp_choice != 0)
switch (menu_item) {
case MENU_START:
sprintf(str_buf, mensagens_main[Iniciar]);
lcd_print_line(str_buf, 1);//"->Iniciar Solda", 1);
break;
case MENU_EDIT:
sprintf(str_buf, mensagens_main[Editar]);
lcd_print_line(str_buf, 1);//"->Editar Perfil", 1);
break;
case MENU_LOG:
sprintf(str_buf, mensagens_main[Registrar]);
lcd_print_line(str_buf, 1);//"->Registrar", 1);
break;
case MENU_CAL:
sprintf(str_buf, mensagens_main[Calibrar]);
lcd_print_line(str_buf, 1);//"->Calibrar", 1);
break;
default: menu_item = MENU_MIN;
}
if (keys & KEY_ENTER) {
switch (menu_item) {
case MENU_START:
controle();
break;
case MENU_CAL:
calibrate();
break;
case MENU_EDIT:
edit();
break;
case MENU_LOG:
logging();
break;
default:
break;
}
sprintf(str_buf, mensagens_main[Terminado]);
lcd_print_line(str_buf, 0);//"Terminado", 0);
sprintf(str_buf, mensagens_main[press]);
lcd_print_line(str_buf, 1); //"press [ENT]", 1);
while ((keys_get() & KEY_ENTER) == 0) {
power_heat1 = 0;
power_heat2 = 0; // No heatelement activated
};
// lcd_print_line("DINST SMD-OVEN", 0);
disp_choice = 1;
}
// read_time; /*TODO criar rotina de leitura RTC
if (secflag) {
sprintf(str_buf, mensagens_main[DINST1], t_hour, t_min);//"DINST %2uh%2um", t_hour, t_min);
lcd_print_line(str_buf, 0);
secflag = 0;
}
wait_1ms();
power_heat1 = 0;
power_heat2 = 0; // No heatelement activated
}
}
