/**
* M0: Unconditional stop - Wait for user button press on LCD
* M1: Conditional stop - Wait for user button press on LCD
*/
void GcodeSuite::M0_M1() {
const char * const args = parser.string_arg;
millis_t ms = 0;
bool hasP = false, hasS = false;
if (parser.seenval('P')) {
ms = parser.value_millis(); // milliseconds to wait
hasP = ms > 0;
}
if (parser.seenval('S')) {
ms = parser.value_millis_from_seconds(); // seconds to wait
hasS = ms > 0;
}
#if ENABLED(ULTIPANEL)
if (!hasP && !hasS && args && *args)
lcd_setstatus(args, true);
else {
LCD_MESSAGEPGM(MSG_USERWAIT);
#if ENABLED(LCD_PROGRESS_BAR) && PROGRESS_MSG_EXPIRE > 0
dontExpireStatus();
#endif
}
#else
if (!hasP && !hasS && args && *args) {
SERIAL_ECHO_START();
SERIAL_ECHOLN(args);
}
#endif
KEEPALIVE_STATE(PAUSED_FOR_USER);
wait_for_user = true;
stepper.synchronize();
refresh_cmd_timeout();
if (ms > 0) {
ms += previous_cmd_ms; // wait until this time for a click
while (PENDING(millis(), ms) && wait_for_user) idle();
}
else {
#if ENABLED(ULTIPANEL)
if (lcd_detected()) {
while (wait_for_user) idle();
IS_SD_PRINTING ? LCD_MESSAGEPGM(MSG_RESUMING) : LCD_MESSAGEPGM(WELCOME_MSG);
}
#else
while (wait_for_user) idle();
#endif
}
wait_for_user = false;
KEEPALIVE_STATE(IN_HANDLER);
}
void CardReader::startWrite(char *filename, bool lcd_status/*=true*/) {
if(!cardOK) return;
file.close();
if(!file.open(curDir, filename, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
ECHO_LMT(ER, SERIAL_SD_OPEN_FILE_FAIL, filename);
}
else {
saving = true;
ECHO_EMT(SERIAL_SD_WRITE_TO_FILE, filename);
if (lcd_status) lcd_setstatus(filename);
}
}
static void lcd_sdcard_stop()
{
card.sdprinting = false;
card.closefile();
quickStop();
if(SD_FINISHED_STEPPERRELEASE)
{
enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
}
autotempShutdown();
cancel_heatup = true;
lcd_setstatus(MSG_PRINT_ABORTED);
}
void Endstops::report_state() {
if (endstop_hit_bits) {
#if ENABLED(ULTRA_LCD)
char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' ';
#define _SET_STOP_CHAR(A,C) (chr## A = C)
#else
#define _SET_STOP_CHAR(A,C) ;
#endif
#define _ENDSTOP_HIT_ECHO(A,C) do{ \
SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", stepper.triggered_position_mm(A ##_AXIS)); \
_SET_STOP_CHAR(A,C); }while(0)
#define _ENDSTOP_HIT_TEST(A,C) \
if (TEST(endstop_hit_bits, A ##_MIN) || TEST(endstop_hit_bits, A ##_MAX)) \
_ENDSTOP_HIT_ECHO(A,C)
SERIAL_ECHO_START;
SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
_ENDSTOP_HIT_TEST(X, 'X');
_ENDSTOP_HIT_TEST(Y, 'Y');
_ENDSTOP_HIT_TEST(Z, 'Z');
#if ENABLED(Z_MIN_PROBE_ENDSTOP)
#define P_AXIS Z_AXIS
if (TEST(endstop_hit_bits, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
#endif
SERIAL_EOL;
#if ENABLED(ULTRA_LCD)
char msg[3 * strlen(MSG_LCD_ENDSTOPS) + 8 + 1]; // Room for a UTF 8 string
sprintf_P(msg, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
lcd_setstatus(msg);
#endif
hit_on_purpose();
#if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
if (stepper.abort_on_endstop_hit) {
card.sdprinting = false;
card.closefile();
quickstop_stepper();
thermalManager.disable_all_heaters(); // switch off all heaters.
}
#endif
}
} // Endstops::report_state
static void lcd_sdcard_stop()
{
card.sdprinting = false;
card.closefile();
quickStop();
if(SD_FINISHED_STEPPERRELEASE)
{
if (current_position[Z_AXIS] < Z_MAX_POS - 191)
{
enquecommand_P(PSTR(SD_FINISHED_MOVEEXTRUDERAWAY1));
enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
}
else
{
enquecommand_P(PSTR(SD_FINISHED_MOVEEXTRUDERAWAY0));
enquecommand_P(PSTR(SD_FINISHED_RELEASECOMMAND));
}
}
disable_heater();
autotempShutdown();
lcd_setstatus(MSG_PRINT_ABORTED);
}
void setpageInfo() {
if (NextionPage == 0) {
Pinfo.show();
#if HAS(TEMP_0)
Hotend.setValue(1);
#endif
#if HAS(TEMP_1)
Hotend.setValue(2);
#endif
#if HAS(TEMP_2)
Hotend.setValue(3);
#elif HAS(TEMP_BED)
Bed.setValue(1);
Hotend21.setText("BED");
#endif
VSpeed.setValue(100);
#if HAS(FAN)
Fan.setValue(1);
#endif
lcd_setstatus(lcd_status_message);
}
Pinfo.show();
#if ENABLED(NEXTION_GFX)
#if MECH(DELTA)
gfx_clear((X_MAX_POS) * 2, (Y_MAX_POS) * 2, Z_MAX_POS);
#else
gfx_clear(X_MAX_POS, Y_MAX_POS, Z_MAX_POS);
#endif
#endif
}
void setpageInfo() {
Pinfo.show();
PageInfo = true;
#if ENABLED(NEXTION_GFX)
gfx_clear(X_MAX_POS, Y_MAX_POS, Z_MAX_POS);
#endif
#if HAS_TEMP_0
Hotend.setValue(1);
#endif
#if HAS_TEMP_1
Hotend.setValue(2);
#endif
#if HAS_TEMP_2
Hotend.setValue(3);
#elif HAS_TEMP_BED
Hotend21.setText("BED");
Bed.setValue(1);
#endif
lcd_setstatus(lcd_status_message);
}
void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/) {
if (!cardOK) return;
if (file.isOpen()) { //replacing current file by new file, or subfile call
if (!replace_current) {
if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
SERIAL_ERROR_START;
SERIAL_ERRORPGM("trying to call sub-gcode files with too many levels. MAX level is:");
SERIAL_ERRORLN(SD_PROCEDURE_DEPTH);
kill();
return;
}
SERIAL_ECHO_START;
SERIAL_ECHOPGM("SUBROUTINE CALL target:\"");
SERIAL_ECHO(name);
SERIAL_ECHOPGM("\" parent:\"");
//store current filename and position
getAbsFilename(filenames[file_subcall_ctr]);
SERIAL_ECHO(filenames[file_subcall_ctr]);
SERIAL_ECHOPGM("\" pos");
SERIAL_ECHOLN(sdpos);
filespos[file_subcall_ctr] = sdpos;
file_subcall_ctr++;
}
else {
SERIAL_ECHO_START;
SERIAL_ECHOPGM("Now doing file: ");
SERIAL_ECHOLN(name);
}
file.close();
}
else { //opening fresh file
file_subcall_ctr = 0; //resetting procedure depth in case user cancels print while in procedure
SERIAL_ECHO_START;
SERIAL_ECHOPGM("Now fresh file: ");
SERIAL_ECHOLN(name);
}
sdprinting = false;
SdFile myDir;
curDir = &root;
char *fname = name;
char *dirname_start, *dirname_end;
if (name[0] == '/') {
dirname_start = &name[1];
while(dirname_start > 0) {
dirname_end = strchr(dirname_start, '/');
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start - name));
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end - name));
if (dirname_end > 0 && dirname_end > dirname_start) {
char subdirname[FILENAME_LENGTH];
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
subdirname[dirname_end - dirname_start] = 0;
SERIAL_ECHOLN(subdirname);
if (!myDir.open(curDir, subdirname, O_READ)) {
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLCHAR('.');
return;
}
else {
//SERIAL_ECHOLN("dive ok");
}
curDir = &myDir;
dirname_start = dirname_end + 1;
}
else { // the remainder after all /fsa/fdsa/ is the filename
fname = dirname_start;
//SERIAL_ECHOLN("remainder");
//SERIAL_ECHOLN(fname);
break;
}
}
}
else { //relative path
curDir = &workDir;
}
if (read) {
if (file.open(curDir, fname, O_READ)) {
filesize = file.fileSize();
SERIAL_PROTOCOLPGM(MSG_SD_FILE_OPENED);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLPGM(MSG_SD_SIZE);
SERIAL_PROTOCOLLN(filesize);
sdpos = 0;
SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
lcd_setstatus(longFilename[0] ? longFilename : fname);
}
else {
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLCHAR('.');
}
}
else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLCHAR('.');
}
else {
saving = true;
SERIAL_PROTOCOLPGM(MSG_SD_WRITE_TO_FILE);
SERIAL_PROTOCOLLN(name);
lcd_setstatus(fname);
}
}
}
void CardReader::openFile(char* name, bool read, bool replace_current/*=true*/, bool lcd_status/*=true*/) {
if (!cardOK) return;
if (file.isOpen()) { //replacing current file by new file, or subfile call
if (!replace_current) {
if (file_subcall_ctr > SD_PROCEDURE_DEPTH - 1) {
ECHO_LMV(ER, MSG_SD_MAX_DEPTH, SD_PROCEDURE_DEPTH);
kill(PSTR(MSG_KILLED));
return;
}
ECHO_SMV(DB, "SUBROUTINE CALL target:\"", name);
ECHO_M("\" parent:\"");
//store current filename and position
getAbsFilename(filenames[file_subcall_ctr]);
ECHO_V(filenames[file_subcall_ctr]);
ECHO_EMV("\" pos", sdpos);
filespos[file_subcall_ctr] = sdpos;
file_subcall_ctr++;
}
else {
ECHO_LMV(DB, "Now doing file: ", name);
}
file.close();
}
else { // opening fresh file
file_subcall_ctr = 0; // resetting procedure depth in case user cancels print while in procedure
ECHO_LMV(DB, "Now fresh file: ", name);
}
sdprinting = false;
SdFile myDir;
curDir = &root;
char *fname = name;
char *dirname_start, *dirname_end;
if (name[0] == '/') {
dirname_start = &name[1];
while (dirname_start > 0) {
dirname_end = strchr(dirname_start, '/');
if (dirname_end > 0 && dirname_end > dirname_start) {
char subdirname[FILENAME_LENGTH];
strncpy(subdirname, dirname_start, dirname_end - dirname_start);
subdirname[dirname_end - dirname_start] = 0;
ECHO_EV(subdirname);
if (!myDir.open(curDir, subdirname, O_READ)) {
ECHO_MV(MSG_SD_OPEN_FILE_FAIL, subdirname);
ECHO_C('.');
return;
}
else {
//ECHO_EM("dive ok");
}
curDir = &myDir;
dirname_start = dirname_end + 1;
}
else { // the remainder after all /fsa/fdsa/ is the filename
fname = dirname_start;
//ECHO_EM("remainder");
//ECHO_EV(fname);
break;
}
}
}
else { //relative path
curDir = &workDir;
}
if (read) {
if (file.open(curDir, fname, O_READ)) {
filesize = file.fileSize();
ECHO_MV(MSG_SD_FILE_OPENED, fname);
ECHO_EMV(MSG_SD_SIZE, filesize);
sdpos = 0;
ECHO_EM(MSG_SD_FILE_SELECTED);
getfilename(0, fname);
if(lcd_status) lcd_setstatus(longFilename[0] ? longFilename : fname);
}
else {
ECHO_MV(MSG_SD_OPEN_FILE_FAIL, fname);
ECHO_PGM(".\n");
}
}
else { //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) {
ECHO_MV(MSG_SD_OPEN_FILE_FAIL, fname);
ECHO_PGM(".\n");
}
else {
saving = true;
ECHO_EMV(MSG_SD_WRITE_TO_FILE, name);
if(lcd_status) lcd_setstatus(fname);
}
}
}
void CardReader::openFile(char* name,bool read)
{
if(!cardOK)
return;
file.close();
sdprinting = false;
SdFile myDir;
curDir=&root;
char *fname=name;
char *dirname_start,*dirname_end;
if(name[0]=='/')
{
dirname_start=strchr(name,'/')+1;
while(dirname_start>0)
{
dirname_end=strchr(dirname_start,'/');
//SERIAL_ECHO("start:");SERIAL_ECHOLN((int)(dirname_start-name));
//SERIAL_ECHO("end :");SERIAL_ECHOLN((int)(dirname_end-name));
if(dirname_end>0 && dirname_end>dirname_start)
{
char subdirname[13];
strncpy(subdirname, dirname_start, dirname_end-dirname_start);
subdirname[dirname_end-dirname_start]=0;
SERIAL_ECHOLN(subdirname);
if(!myDir.open(curDir,subdirname,O_READ))
{
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM(".");
return;
}
else
{
//SERIAL_ECHOLN("dive ok");
}
curDir=&myDir;
dirname_start=dirname_end+1;
}
else // the reminder after all /fsa/fdsa/ is the filename
{
fname=dirname_start;
//SERIAL_ECHOLN("remaider");
//SERIAL_ECHOLN(fname);
break;
}
}
}
else //relative path
{
curDir=&workDir;
}
if(read)
{
if (file.open(curDir, fname, O_READ))
{
filesize = file.fileSize();
SERIAL_PROTOCOLPGM(MSG_SD_FILE_OPENED);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLPGM(MSG_SD_SIZE);
SERIAL_PROTOCOLLN(filesize);
sdpos = 0;
SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
lcd_setstatus(fname);
}
else
{
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM(".");
}
}
else
{ //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
{
SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM(".");
}
else
{
saving = true;
SERIAL_PROTOCOLPGM(MSG_SD_WRITE_TO_FILE);
SERIAL_PROTOCOLLN(name);
lcd_setstatus(fname);
}
}
}
void lcd_update() {
if (!NextionON) return;
nexLoop(nex_listen_list);
millis_t ms = millis();
if (ms > next_lcd_update_ms) {
sendCurrentPageId(&NextionPage);
if (NextionPage == 1) {
if (fanSpeed > 0) fantimer.enable();
else fantimer.disable();
uint32_t temp_feedrate = 0;
VSpeed.getValue(&temp_feedrate);
feedrate_multiplier = (int)temp_feedrate;
#if HAS(TEMP_0)
temptoLCD(0, degHotend(0), degTargetHotend(0));
#endif
#if HAS(TEMP_1)
temptoLCD(1, degHotend(1), degTargetHotend(1));
#endif
#if HAS(TEMP_2)
temptoLCD(2, degHotend(2), degTargetHotend(2));
#elif HAS(TEMP_BED)
temptoLCD(2, degBed(), degTargetBed());
#endif
coordtoLCD();
#if ENABLED(SDSUPPORT)
if (card.isFileOpen()) {
if (SDstatus != 2) {
SDstatus = 2;
SD.setValue(2);
NPlay.setShow();
NStop.setShow();
}
if(IS_SD_PRINTING) {
// Progress bar solid part
sdbar.setValue(card.percentDone());
NPlay.setPic(17);
// Estimate End Time
uint16_t time = print_job_timer.duration() / 60;
uint16_t end_time = (time * (100 - card.percentDone())) / card.percentDone();
if (end_time > (60 * 23)) {
lcd_setstatus("End --:--");
}
else if (end_time >= 0) {
char temp[30];
sprintf_P(temp, PSTR("End %i:%i"), end_time / 60, end_time%60);
lcd_setstatus(temp);
}
}
else {
NPlay.setPic(16);
}
}
else if (card.cardOK && SDstatus != 1) {
SDstatus = 1;
SD.setValue(1);
MSD1.setShow();
NPlay.setHide();
NStop.setHide();
}
else if (!card.cardOK && SDstatus != 0) {
SDstatus = 0;
SD.setValue(0);
MSD1.setHide();
NPlay.setHide();
NStop.setHide();
}
#endif
}
else if (NextionPage == 6) {
coordtoLCD();
}
next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL;
}
}
void StopPopCallback(void *ptr) {
quickStop();
card.stopPrint();
autotempShutdown();
lcd_setstatus(MSG_PRINT_ABORTED, true);
}
