static void prvUnlockQueue( xQueueHandle pxQueue )
{
/* THIS FUNCTION MUST BE CALLED WITH THE SCHEDULER SUSPENDED. */
/* The lock counts contains the number of extra data items placed or
removed from the queue while the queue was locked. When a queue is
locked items can be added or removed, but the event lists cannot be
updated. */
taskENTER_CRITICAL();
{
--( pxQueue->xTxLock );
/* See if data was added to the queue while it was locked. */
if( pxQueue->xTxLock > queueUNLOCKED )
{
pxQueue->xTxLock = queueUNLOCKED;
/* Data was posted while the queue was locked. Are any tasks
blocked waiting for data to become available? */
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
/* Tasks that are removed from the event list will get added to
the pending ready list as the scheduler is still suspended. */
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
/* The task waiting has a higher priority so record that a
context switch is required. */
vTaskMissedYield();
}
}
}
}
taskEXIT_CRITICAL();
/* Do the same for the Rx lock. */
taskENTER_CRITICAL();
{
--( pxQueue->xRxLock );
if( pxQueue->xRxLock > queueUNLOCKED )
{
pxQueue->xRxLock = queueUNLOCKED;
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
{
vTaskMissedYield();
}
}
}
}
taskEXIT_CRITICAL();
}
static void vDNSDoCallback( TickType_t xIdentifier, const char *pcName, uint32_t ulIPAddress )
{
const ListItem_t *pxIterator;
const MiniListItem_t* xEnd = ( const MiniListItem_t* )listGET_END_MARKER( &xCallbackList );
vTaskSuspendAll();
{
for( pxIterator = ( const ListItem_t * ) listGET_NEXT( xEnd );
pxIterator != ( const ListItem_t * ) xEnd;
pxIterator = ( const ListItem_t * ) listGET_NEXT( pxIterator ) )
{
if( listGET_LIST_ITEM_VALUE( pxIterator ) == xIdentifier )
{
DNSCallback_t *pxCallback = ( DNSCallback_t * ) listGET_LIST_ITEM_OWNER( pxIterator );
pxCallback->pCallbackFunction( pcName, pxCallback->pvSearchID, ulIPAddress );
uxListRemove( &pxCallback->xListItem );
vPortFree( pxCallback );
if( listLIST_IS_EMPTY( &xCallbackList ) )
{
vIPSetDnsTimerEnableState( pdFALSE );
}
break;
}
}
}
xTaskResumeAll();
}
void vCoRoutineSchedule( void )
{
/* See if any co-routines readied by events need moving to the ready lists. */
prvCheckPendingReadyList();
/* See if any delayed co-routines have timed out. */
prvCheckDelayedList();
/* Find the highest priority queue that contains ready co-routines. */
while( listLIST_IS_EMPTY( &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) ) )
{
if( uxTopCoRoutineReadyPriority == 0 )
{
/* No more co-routines to check. */
return;
}
--uxTopCoRoutineReadyPriority;
}
/* listGET_OWNER_OF_NEXT_ENTRY walks through the list, so the co-routines
of the same priority get an equal share of the processor time. */
listGET_OWNER_OF_NEXT_ENTRY( pxCurrentCoRoutine, &( pxReadyCoRoutineLists[ uxTopCoRoutineReadyPriority ] ) );
/* Call the co-routine. */
( pxCurrentCoRoutine->pxCoRoutineFunction )( pxCurrentCoRoutine, pxCurrentCoRoutine->uxIndex );
return;
}
void vDNSCheckCallBack( void *pvSearchID )
{
const ListItem_t *pxIterator;
const MiniListItem_t* xEnd = ( const MiniListItem_t* )listGET_END_MARKER( &xCallbackList );
vTaskSuspendAll();
{
for( pxIterator = ( const ListItem_t * ) listGET_NEXT( xEnd );
pxIterator != ( const ListItem_t * ) xEnd;
)
{
DNSCallback_t *pxCallback = ( DNSCallback_t * ) listGET_LIST_ITEM_OWNER( pxIterator );
/* Move to the next item because we might remove this item */
pxIterator = ( const ListItem_t * ) listGET_NEXT( pxIterator );
if( ( pvSearchID != NULL ) && ( pvSearchID == pxCallback->pvSearchID ) )
{
uxListRemove( &pxCallback->xListItem );
vPortFree( pxCallback );
}
else if( xTaskCheckForTimeOut( &pxCallback->xTimeoutState, &pxCallback->xRemaningTime ) != pdFALSE )
{
pxCallback->pCallbackFunction( pxCallback->pcName, pxCallback->pvSearchID, 0 );
uxListRemove( &pxCallback->xListItem );
vPortFree( ( void * ) pxCallback );
}
}
}
xTaskResumeAll();
if( listLIST_IS_EMPTY( &xCallbackList ) )
{
vIPSetDnsTimerEnableState( pdFALSE );
}
}
static void vDNSSetCallBack( const char *pcHostName, void *pvSearchID, FOnDNSEvent pCallbackFunction, TickType_t xTimeout, TickType_t xIdentifier )
{
size_t lLength = strlen( pcHostName );
DNSCallback_t *pxCallback = ( DNSCallback_t * )pvPortMalloc( sizeof( *pxCallback ) + lLength );
/* Translate from ms to number of clock ticks. */
xTimeout /= portTICK_PERIOD_MS;
if( pxCallback != NULL )
{
if( listLIST_IS_EMPTY( &xCallbackList ) )
{
/* This is the first one, start the DNS timer to check for timeouts */
vIPReloadDNSTimer( FreeRTOS_min_uint32( 1000U, xTimeout ) );
}
strcpy( pxCallback->pcName, pcHostName );
pxCallback->pCallbackFunction = pCallbackFunction;
pxCallback->pvSearchID = pvSearchID;
pxCallback->xRemaningTime = xTimeout;
vTaskSetTimeOutState( &pxCallback->xTimeoutState );
listSET_LIST_ITEM_OWNER( &( pxCallback->xListItem ), ( void* ) pxCallback );
listSET_LIST_ITEM_VALUE( &( pxCallback->xListItem ), xIdentifier );
vTaskSuspendAll();
{
vListInsertEnd( &xCallbackList, &pxCallback->xListItem );
}
xTaskResumeAll();
}
}
static void prvProcessTimerOrBlockTask( const TickType_t xNextExpireTime, BaseType_t xListWasEmpty )
{
TickType_t xTimeNow;
BaseType_t xTimerListsWereSwitched;
vTaskSuspendAll();
{
/* Obtain the time now to make an assessment as to whether the timer
has expired or not. If obtaining the time causes the lists to switch
then don't process this timer as any timers that remained in the list
when the lists were switched will have been processed within the
prvSampleTimeNow() function. */
xTimeNow = prvSampleTimeNow( &xTimerListsWereSwitched );
if( xTimerListsWereSwitched == pdFALSE )
{
/* The tick count has not overflowed, has the timer expired? */
if( ( xListWasEmpty == pdFALSE ) && ( xNextExpireTime <= xTimeNow ) )
{
( void ) xTaskResumeAll();
prvProcessExpiredTimer( xNextExpireTime, xTimeNow );
}
else
{
/* The tick count has not overflowed, and the next expire
time has not been reached yet. This task should therefore
block to wait for the next expire time or a command to be
received - whichever comes first. The following line cannot
be reached unless xNextExpireTime > xTimeNow, except in the
case when the current timer list is empty. */
if( xListWasEmpty != pdFALSE )
{
/* The current timer list is empty - is the overflow list
also empty? */
xListWasEmpty = listLIST_IS_EMPTY( pxOverflowTimerList );
}
vQueueWaitForMessageRestricted( xTimerQueue, ( xNextExpireTime - xTimeNow ), xListWasEmpty );
if( xTaskResumeAll() == pdFALSE )
{
/* Yield to wait for either a command to arrive, or the
block time to expire. If a command arrived between the
critical section being exited and this yield then the yield
will not cause the task to block. */
portYIELD_WITHIN_API();
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
}
else
{
( void ) xTaskResumeAll();
}
}
}
static void prvCheckDelayedList( void )
{
corCRCB *pxCRCB;
xPassedTicks = xTaskGetTickCount() - xLastTickCount;
while( xPassedTicks )
{
xCoRoutineTickCount++;
xPassedTicks--;
/* If the tick count has overflowed we need to swap the ready lists. */
if( xCoRoutineTickCount == 0 )
{
xList * pxTemp;
/* Tick count has overflowed so we need to swap the delay lists. If there are
any items in pxDelayedCoRoutineList here then there is an error! */
pxTemp = pxDelayedCoRoutineList;
pxDelayedCoRoutineList = pxOverflowDelayedCoRoutineList;
pxOverflowDelayedCoRoutineList = pxTemp;
}
/* See if this tick has made a timeout expire. */
while( listLIST_IS_EMPTY( pxDelayedCoRoutineList ) == pdFALSE )
{
pxCRCB = ( corCRCB * ) listGET_OWNER_OF_HEAD_ENTRY( pxDelayedCoRoutineList );
if( xCoRoutineTickCount < listGET_LIST_ITEM_VALUE( &( pxCRCB->xGenericListItem ) ) )
{
/* Timeout not yet expired. */
break;
}
//portDISABLE_INTERRUPTS();
PortDisableInt_NoNest();
{
/* The event could have occurred just before this critical
section. If this is the case then the generic list item will
have been moved to the pending ready list and the following
line is still valid. Also the pvContainer parameter will have
been set to NULL so the following lines are also valid. */
uxListRemove( &( pxCRCB->xGenericListItem ) );
/* Is the co-routine waiting on an event also? */
if( pxCRCB->xEventListItem.pvContainer )
{
( void ) uxListRemove( &( pxCRCB->xEventListItem ) );
}
}
// portENABLE_INTERRUPTS();
PortEnableInt_NoNest();
prvAddCoRoutineToReadyQueue( pxCRCB );
}
}
xLastTickCount = xCoRoutineTickCount;
}
static void prvSwitchTimerLists( void )
{
TickType_t xNextExpireTime, xReloadTime;
List_t *pxTemp;
Timer_t *pxTimer;
BaseType_t xResult;
/* The tick count has overflowed. The timer lists must be switched.
If there are any timers still referenced from the current timer list
then they must have expired and should be processed before the lists
are switched. */
while( listLIST_IS_EMPTY( pxCurrentTimerList ) == pdFALSE )
{
xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
/* Remove the timer from the list. */
pxTimer = ( Timer_t * ) listGET_OWNER_OF_HEAD_ENTRY( pxCurrentTimerList );
( void ) uxListRemove( &( pxTimer->xTimerListItem ) );
traceTIMER_EXPIRED( pxTimer );
/* Execute its callback, then send a command to restart the timer if
it is an auto-reload timer. It cannot be restarted here as the lists
have not yet been switched. */
pxTimer->pxCallbackFunction( ( TimerHandle_t ) pxTimer );
if( pxTimer->uxAutoReload == ( UBaseType_t ) pdTRUE )
{
/* Calculate the reload value, and if the reload value results in
the timer going into the same timer list then it has already expired
and the timer should be re-inserted into the current list so it is
processed again within this loop. Otherwise a command should be sent
to restart the timer to ensure it is only inserted into a list after
the lists have been swapped. */
xReloadTime = ( xNextExpireTime + pxTimer->xTimerPeriodInTicks );
if( xReloadTime > xNextExpireTime )
{
listSET_LIST_ITEM_VALUE( &( pxTimer->xTimerListItem ), xReloadTime );
listSET_LIST_ITEM_OWNER( &( pxTimer->xTimerListItem ), pxTimer );
vListInsert( pxCurrentTimerList, &( pxTimer->xTimerListItem ) );
}
else
{
xResult = xTimerGenericCommand( pxTimer, tmrCOMMAND_START_DONT_TRACE, xNextExpireTime, NULL, tmrNO_DELAY );
configASSERT( xResult );
( void ) xResult;
}
}
else
{
mtCOVERAGE_TEST_MARKER();
}
}
pxTemp = pxCurrentTimerList;
pxCurrentTimerList = pxOverflowTimerList;
pxOverflowTimerList = pxTemp;
}
signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxTaskWoken )
{
signed portBASE_TYPE xReturn;
/* We cannot block from an ISR, so check there is data available. */
if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
{
/* Copy the data from the queue. */
pxQueue->pcReadFrom += pxQueue->uxItemSize;
if( pxQueue->pcReadFrom >= pxQueue->pcTail )
{
pxQueue->pcReadFrom = pxQueue->pcHead;
}
--( pxQueue->uxMessagesWaiting );
if(pvBuffer != (void*)0UL)
{
memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
}
/* If the queue is locked we will not modify the event list. Instead
we update the lock count so the task that unlocks the queue will know
that an ISR has removed data while the queue was locked. */
if( pxQueue->xRxLock == queueUNLOCKED )
{
/* We only want to wake one task per ISR, so check that a task has
not already been woken. */
if( !( *pxTaskWoken ) )
{
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
{
/* The task waiting has a higher priority than us so
force a context switch. */
*pxTaskWoken = pdTRUE;
}
}
}
}
else
{
/* Increment the lock count so the task that unlocks the queue
knows that data was removed while it was locked. */
++( pxQueue->xRxLock );
}
xReturn = pdPASS;
}
else
{
xReturn = pdFAIL;
}
return xReturn;
}
void IBN_GetTaskList (void)
{
u32 Queue_u32;
IBN_TasklistCounter_u8 = 0;
// Scan all running queues
portENTER_CRITICAL();
// Scan ready lists
Queue_u32 = uxTopUsedPriority + 1;
do
{
Queue_u32--;
if( !listLIST_IS_EMPTY( &( pxReadyTasksLists[ Queue_u32 ] ) ) )
{
IBN_GetTaskListEntrys ( &(pxReadyTasksLists[ Queue_u32 ]),IBN_TASK_STATE_RUNNING);
}
} while( Queue_u32 > ( unsigned short ) tskIDLE_PRIORITY );
if( !listLIST_IS_EMPTY( pxDelayedTaskList ) )
{
IBN_GetTaskListEntrys (pxDelayedTaskList,IBN_TASK_STATE_DELAYED);
}
if( !listLIST_IS_EMPTY( pxOverflowDelayedTaskList ) )
{
IBN_GetTaskListEntrys (pxOverflowDelayedTaskList,IBN_TASK_STATE_DELAYED_OVER);
}
if( !listLIST_IS_EMPTY( &xSuspendedTaskList ) )
{
IBN_GetTaskListEntrys (&xSuspendedTaskList,IBN_TASK_STATE_SUSPEND);
}
portEXIT_CRITICAL();
}
signed portBASE_TYPE xQueueGenericSendFromISR( xQueueHandle pxQueue, const void * const pvItemToQueue, signed portBASE_TYPE *pxHigherPriorityTaskWoken, portBASE_TYPE xCopyPosition )
{
signed portBASE_TYPE xReturn;
unsigned portBASE_TYPE uxSavedInterruptStatus;
/* Similar to xQueueGenericSend, except we don't block if there is no room
in the queue. Also we don't directly wake a task that was blocked on a
queue read, instead we return a flag to say whether a context switch is
required or not (i.e. has a task with a higher priority than us been woken
by this post). */
uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
{
if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
{
traceQUEUE_SEND_FROM_ISR( pxQueue );
prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
/* If the queue is locked we do not alter the event list. This will
be done when the queue is unlocked later. */
if( pxQueue->xTxLock == queueUNLOCKED )
{
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
/* The task waiting has a higher priority so record that a
context switch is required. */
*pxHigherPriorityTaskWoken = pdTRUE;
}
}
}
else
{
/* Increment the lock count so the task that unlocks the queue
knows that data was posted while it was locked. */
++( pxQueue->xTxLock );
}
xReturn = pdPASS;
}
else
{
traceQUEUE_SEND_FROM_ISR_FAILED( pxQueue );
xReturn = errQUEUE_FULL;
}
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
return xReturn;
}
signed portBASE_TYPE xQueueReceiveFromISR( xQueueHandle pxQueue, void * const pvBuffer, signed portBASE_TYPE *pxTaskWoken )
{
signed portBASE_TYPE xReturn;
unsigned portBASE_TYPE uxSavedInterruptStatus;
uxSavedInterruptStatus = portSET_INTERRUPT_MASK_FROM_ISR();
{
/* We cannot block from an ISR, so check there is data available. */
if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
{
traceQUEUE_RECEIVE_FROM_ISR( pxQueue );
prvCopyDataFromQueue( pxQueue, pvBuffer );
--( pxQueue->uxMessagesWaiting );
/* If the queue is locked we will not modify the event list. Instead
we update the lock count so the task that unlocks the queue will know
that an ISR has removed data while the queue was locked. */
if( pxQueue->xRxLock == queueUNLOCKED )
{
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
{
/* The task waiting has a higher priority than us so
force a context switch. */
*pxTaskWoken = pdTRUE;
}
}
}
else
{
/* Increment the lock count so the task that unlocks the queue
knows that data was removed while it was locked. */
++( pxQueue->xRxLock );
}
xReturn = pdPASS;
}
else
{
xReturn = pdFAIL;
traceQUEUE_RECEIVE_FROM_ISR_FAILED( pxQueue );
}
}
portCLEAR_INTERRUPT_MASK_FROM_ISR( uxSavedInterruptStatus );
return xReturn;
}
static Void callback_ToHost(VirtQueue_Handle vq)
{
UInt16 avail;
int i;
Bool doSwitch[portNUM_PROCESSORS];
unsigned portBASE_TYPE curCpu = portGetCurrentCPU();
taskENTER_CRITICAL_NOT_RECURSIVE_FROM_ISR(&virtQueLock);
if(listLIST_IS_EMPTY(&availBufList) != pdFALSE){
taskEXIT_CRITICAL_NOT_RECURSIVE_FROM_ISR(&virtQueLock);
return;
}
if((avail = GET_AVAIL_COUNT(vq)) == 0){
taskEXIT_CRITICAL_NOT_RECURSIVE_FROM_ISR(&virtQueLock);
return;
}
memset(doSwitch, FALSE, sizeof(doSwitch));
do{
signed portBASE_TYPE ret;
/* Because this function is not an application code, */
/* there is not the problem with using xTaskRemoveFromEventList. */
ret = xTaskRemoveFromEventList(&availBufList, pdFALSE);
if(ret >= 0){
doSwitch[ret] = TRUE;
}
}
while(--avail > 0);
taskEXIT_CRITICAL_NOT_RECURSIVE_FROM_ISR(&virtQueLock);
for(i = 0; i < portNUM_PROCESSORS; i++){
if(doSwitch[i]){
if(i == (int)curCpu){
vPortYieldFromISR();
}
else{
portINTERRUPT_CORE(i);
}
}
}
}
static void prvCheckPendingReadyList( void )
{
/* Are there any co-routines waiting to get moved to the ready list? These
are co-routines that have been readied by an ISR. The ISR cannot access
the ready lists itself. */
while ( listLIST_IS_EMPTY( &xPendingReadyCoRoutineList ) == pdFALSE ) {
corCRCB *pxUnblockedCRCB;
/* The pending ready list can be accessed by an ISR. */
portDISABLE_INTERRUPTS();
{
pxUnblockedCRCB = ( corCRCB * ) listGET_OWNER_OF_HEAD_ENTRY( (&xPendingReadyCoRoutineList) );
( void ) uxListRemove( &( pxUnblockedCRCB->xEventListItem ) );
}
portENABLE_INTERRUPTS();
( void ) uxListRemove( &( pxUnblockedCRCB->xGenericListItem ) );
prvAddCoRoutineToReadyQueue( pxUnblockedCRCB );
}
}
signed portBASE_TYPE xQueueSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xTaskPreviouslyWoken )
{
/* Similar to xQueueSend, except we don't block if there is no room in the
queue. Also we don't directly wake a task that was blocked on a queue
read, instead we return a flag to say whether a context switch is required
or not (i.e. has a task with a higher priority than us been woken by this
post). */
if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
{
prvCopyQueueData( pxQueue, pvItemToQueue );
/* If the queue is locked we do not alter the event list. This will
be done when the queue is unlocked later. */
if( pxQueue->xTxLock == queueUNLOCKED )
{
/* We only want to wake one task per ISR, so check that a task has
not already been woken. */
if( !xTaskPreviouslyWoken )
{
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
/* The task waiting has a higher priority so record that a
context switch is required. */
return pdTRUE;
}
}
}
}
else
{
/* Increment the lock count so the task that unlocks the queue
knows that data was posted while it was locked. */
++( pxQueue->xTxLock );
}
}
return xTaskPreviouslyWoken;
}
signed portBASE_TYPE xQueueCRReceiveFromISR( xQueueHandle pxQueue, void *pvBuffer, signed portBASE_TYPE *pxCoRoutineWoken )
{
signed portBASE_TYPE xReturn;
/* We cannot block from an ISR, so check there is data available. If
not then just leave without doing anything. */
if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
{
/* Copy the data from the queue. */
pxQueue->pcReadFrom += pxQueue->uxItemSize;
if( pxQueue->pcReadFrom >= pxQueue->pcTail )
{
pxQueue->pcReadFrom = pxQueue->pcHead;
}
--( pxQueue->uxMessagesWaiting );
memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
if( !( *pxCoRoutineWoken ) )
{
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
{
if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
{
*pxCoRoutineWoken = pdTRUE;
}
}
}
xReturn = pdPASS;
}
else
{
xReturn = pdFAIL;
}
return xReturn;
}
signed portBASE_TYPE xQueueCRSendFromISR( xQueueHandle pxQueue, const void *pvItemToQueue, signed portBASE_TYPE xCoRoutinePreviouslyWoken )
{
/* Cannot block within an ISR so if there is no space on the queue then
exit without doing anything. */
if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
{
prvCopyQueueData( pxQueue, pvItemToQueue );
/* We only want to wake one co-routine per ISR, so check that a
co-routine has not already been woken. */
if( !xCoRoutinePreviouslyWoken )
{
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
return pdTRUE;
}
}
}
}
return xCoRoutinePreviouslyWoken;
}
static TickType_t prvGetNextExpireTime( BaseType_t * const pxListWasEmpty )
{
TickType_t xNextExpireTime;
/* Timers are listed in expiry time order, with the head of the list
referencing the task that will expire first. Obtain the time at which
the timer with the nearest expiry time will expire. If there are no
active timers then just set the next expire time to 0. That will cause
this task to unblock when the tick count overflows, at which point the
timer lists will be switched and the next expiry time can be
re-assessed. */
*pxListWasEmpty = listLIST_IS_EMPTY( pxCurrentTimerList );
if( *pxListWasEmpty == pdFALSE )
{
xNextExpireTime = listGET_ITEM_VALUE_OF_HEAD_ENTRY( pxCurrentTimerList );
}
else
{
/* Ensure the task unblocks when the tick count rolls over. */
xNextExpireTime = ( TickType_t ) 0U;
}
return xNextExpireTime;
}
signed portBASE_TYPE xMutexGive( xMutexHandle pxMutex, portBASE_TYPE Release )
{
portENTER_CRITICAL( );
if ( pxMutex->pxOwner != xTaskGetCurrentTaskHandle( ) )
{
portEXIT_CRITICAL( );
return pdFALSE;
}
if ( Release )
pxMutex->uxCount = 0;
else
{
if ( --pxMutex->uxCount != 0 )
{
portEXIT_CRITICAL( );
return pdFALSE;
}
}
if( !listLIST_IS_EMPTY( &pxMutex->xTasksWaitingToTake ) )
{
pxMutex->pxOwner = (xTaskHandle) listGET_OWNER_OF_HEAD_ENTRY( ( &pxMutex->xTasksWaitingToTake ) );
pxMutex->uxCount = 1;
if( xTaskRemoveFromEventList( &pxMutex->xTasksWaitingToTake ) == pdTRUE )
taskYIELD( );
}
else
{
pxMutex->pxOwner = NULL;
}
portEXIT_CRITICAL( );
return pdTRUE;
}
signed portBASE_TYPE xQueueGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )
{
signed portBASE_TYPE xReturn = pdTRUE;
xTimeOutType xTimeOut;
do
{
/* If xTicksToWait is zero then we are not going to block even
if there is no room in the queue to post. */
if( xTicksToWait > ( portTickType ) 0 )
{
vTaskSuspendAll();
prvLockQueue( pxQueue );
if( xReturn == pdTRUE )
{
/* This is the first time through - we need to capture the
time while the scheduler is locked to ensure we attempt to
block at least once. */
vTaskSetTimeOutState( &xTimeOut );
}
if( prvIsQueueFull( pxQueue ) )
{
/* Need to call xTaskCheckForTimeout again as time could
have passed since it was last called if this is not the
first time around this loop. */
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
traceBLOCKING_ON_QUEUE_SEND( pxQueue );
vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
/* Unlocking the queue means queue events can effect the
event list. It is possible that interrupts occurring now
remove this task from the event list again - but as the
scheduler is suspended the task will go onto the pending
ready last instead of the actual ready list. */
prvUnlockQueue( pxQueue );
/* Resuming the scheduler will move tasks from the pending
ready list into the ready list - so it is feasible that this
task is already in a ready list before it yields - in which
case the yield will not cause a context switch unless there
is also a higher priority task in the pending ready list. */
if( !xTaskResumeAll() )
{
taskYIELD();
}
}
else
{
prvUnlockQueue( pxQueue );
( void ) xTaskResumeAll();
}
}
else
{
/* The queue was not full so we can just unlock the
scheduler and queue again before carrying on. */
prvUnlockQueue( pxQueue );
( void ) xTaskResumeAll();
}
}
/* Higher priority tasks and interrupts can execute during
this time and could possible refill the queue - even if we
unblocked because space became available. */
taskENTER_CRITICAL();
{
/* Is there room on the queue now? To be running we must be
the highest priority task wanting to access the queue. */
if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
{
traceQUEUE_SEND( pxQueue );
prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
xReturn = pdPASS;
/* If there was a task waiting for data to arrive on the
queue then unblock it now. */
if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )
{
/* The unblocked task has a priority higher than
our own so yield immediately. */
taskYIELD();
}
}
}
else
{
/* Setting xReturn to errQUEUE_FULL will force its timeout
to be re-evaluated. This is necessary in case interrupts
and higher priority tasks accessed the queue between this
task being unblocked and subsequently attempting to write
to the queue. */
xReturn = errQUEUE_FULL;
}
}
taskEXIT_CRITICAL();
if( xReturn == errQUEUE_FULL )
{
if( xTicksToWait > ( portTickType ) 0 )
{
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
xReturn = queueERRONEOUS_UNBLOCK;
}
else
{
traceQUEUE_SEND_FAILED( pxQueue );
}
}
else
{
traceQUEUE_SEND_FAILED( pxQueue );
}
}
}
while( xReturn == queueERRONEOUS_UNBLOCK );
return xReturn;
}
signed portBASE_TYPE xQueueCRReceive( xQueueHandle pxQueue, void *pvBuffer, portTickType xTicksToWait )
{
signed portBASE_TYPE xReturn;
/* If the queue is already empty we may have to block. A critical section
is required to prevent an interrupt adding something to the queue
between the check to see if the queue is empty and blocking on the queue. */
portDISABLE_INTERRUPTS();
{
if( prvIsQueueEmpty( pxQueue ) )
{
/* There are no messages in the queue, do we want to block or just
leave with nothing? */
if( xTicksToWait > ( portTickType ) 0 )
{
/* As this is a co-routine we cannot block directly, but return
indicating that we need to block. */
vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToReceive ) );
portENABLE_INTERRUPTS();
return errQUEUE_BLOCKED;
}
else
{
portENABLE_INTERRUPTS();
return errQUEUE_FULL;
}
}
}
portENABLE_INTERRUPTS();
portNOP();
portDISABLE_INTERRUPTS();
{
if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
{
/* Data is available from the queue. */
pxQueue->pcReadFrom += pxQueue->uxItemSize;
if( pxQueue->pcReadFrom >= pxQueue->pcTail )
{
pxQueue->pcReadFrom = pxQueue->pcHead;
}
--( pxQueue->uxMessagesWaiting );
memcpy( ( void * ) pvBuffer, ( void * ) pxQueue->pcReadFrom, ( unsigned ) pxQueue->uxItemSize );
xReturn = pdPASS;
/* Were any co-routines waiting for space to become available? */
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) )
{
/* In this instance the co-routine could be placed directly
into the ready list as we are within a critical section.
Instead the same pending ready list mechansim is used as if
the event were caused from within an interrupt. */
if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) != pdFALSE )
{
xReturn = errQUEUE_YIELD;
}
}
}
else
{
xReturn = pdFAIL;
}
}
portENABLE_INTERRUPTS();
return xReturn;
}
signed portBASE_TYPE xQueueCRSend( xQueueHandle pxQueue, const void *pvItemToQueue, portTickType xTicksToWait )
{
signed portBASE_TYPE xReturn;
/* If the queue is already full we may have to block. A critical section
is required to prevent an interrupt removing something from the queue
between the check to see if the queue is full and blocking on the queue. */
portDISABLE_INTERRUPTS();
{
if( prvIsQueueFull( pxQueue ) )
{
/* The queue is full - do we want to block or just leave without
posting? */
if( xTicksToWait > ( portTickType ) 0 )
{
/* As this is called from a coroutine we cannot block directly, but
return indicating that we need to block. */
vCoRoutineAddToDelayedList( xTicksToWait, &( pxQueue->xTasksWaitingToSend ) );
portENABLE_INTERRUPTS();
return errQUEUE_BLOCKED;
}
else
{
portENABLE_INTERRUPTS();
return errQUEUE_FULL;
}
}
}
portENABLE_INTERRUPTS();
portNOP();
portDISABLE_INTERRUPTS();
{
if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
{
/* There is room in the queue, copy the data into the queue. */
prvCopyQueueData( pxQueue, pvItemToQueue );
xReturn = pdPASS;
/* Were any co-routines waiting for data to become available? */
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
/* In this instance the co-routine could be placed directly
into the ready list as we are within a critical section.
Instead the same pending ready list mechansim is used as if
the event were caused from within an interrupt. */
if( xCoRoutineRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
/* The co-routine waiting has a higher priority so record
that a yield might be appropriate. */
xReturn = errQUEUE_YIELD;
}
}
}
else
{
xReturn = errQUEUE_FULL;
}
}
portENABLE_INTERRUPTS();
return xReturn;
}
signed portBASE_TYPE xQueueGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )
{
signed portBASE_TYPE xReturn = pdTRUE;
xTimeOutType xTimeOut;
signed portCHAR *pcOriginalReadPosition;
do
{
/* If there are no messages in the queue we may have to block. */
if( xTicksToWait > ( portTickType ) 0 )
{
vTaskSuspendAll();
prvLockQueue( pxQueue );
if( xReturn == pdTRUE )
{
/* This is the first time through - we need to capture the
time while the scheduler is locked to ensure we attempt to
block at least once. */
vTaskSetTimeOutState( &xTimeOut );
}
if( prvIsQueueEmpty( pxQueue ) )
{
/* Need to call xTaskCheckForTimeout again as time could
have passed since it was last called if this is not the
first time around this loop. */
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
#if ( configUSE_MUTEXES == 1 )
{
if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
{
portENTER_CRITICAL();
vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );
portEXIT_CRITICAL();
}
}
#endif
vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
prvUnlockQueue( pxQueue );
if( !xTaskResumeAll() )
{
taskYIELD();
}
}
else
{
prvUnlockQueue( pxQueue );
( void ) xTaskResumeAll();
}
}
else
{
prvUnlockQueue( pxQueue );
( void ) xTaskResumeAll();
}
}
/* The two tasks are blocked on the queue, the low priority task is polling/running. */
/* An interrupt occurs here - which unblocks the HP tasks, but they do not run. */
taskENTER_CRITICAL();
{
/* Because the interrupt occurred the LP task manages to grab the data as the other two tasks are not yet running. */
if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
{
/* Remember our read position in case we are just peeking. */
pcOriginalReadPosition = pxQueue->pcReadFrom;
prvCopyDataFromQueue( pxQueue, pvBuffer );
if( xJustPeeking == pdFALSE )
{
traceQUEUE_RECEIVE( pxQueue );
/* We are actually removing data. */
--( pxQueue->uxMessagesWaiting );
#if ( configUSE_MUTEXES == 1 )
{
if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
{
/* Record the information required to implement
priority inheritance should it become necessary. */
pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();
}
}
#endif
if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )
{
taskYIELD();
}
}
}
else
{
traceQUEUE_PEEK( pxQueue );
/* We are not removing the data, so reset our read
pointer. */
pxQueue->pcReadFrom = pcOriginalReadPosition;
/* The data is being left in the queue, so see if there are
any other tasks waiting for the data. */
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
/* Tasks that are removed from the event list will get added to
the pending ready list as the scheduler is still suspended. */
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
/* The task waiting has a higher priority than this task. */
taskYIELD();
}
}
}
xReturn = pdPASS;
}
else
{
xReturn = errQUEUE_EMPTY;
}
}
taskEXIT_CRITICAL();
if( xReturn == errQUEUE_EMPTY )
{
if( xTicksToWait > ( portTickType ) 0 )
{
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
xReturn = queueERRONEOUS_UNBLOCK;
}
else
{
traceQUEUE_RECEIVE_FAILED( pxQueue );
}
}
else
{
traceQUEUE_RECEIVE_FAILED( pxQueue );
}
}
} while( xReturn == queueERRONEOUS_UNBLOCK );
return xReturn;
}
signed portBASE_TYPE xQueueAltGenericReceive( xQueueHandle pxQueue, void * const pvBuffer, portTickType xTicksToWait, portBASE_TYPE xJustPeeking )
{
signed portBASE_TYPE xReturn = pdTRUE;
xTimeOutType xTimeOut;
signed portCHAR *pcOriginalReadPosition;
/* The source code that implements the alternative (Alt) API is
simpler because it makes more use of critical sections. This is
the approach taken by many other RTOSes, but FreeRTOS.org has the
preferred fully featured API too. The fully featured API has more
complex code that takes longer to execute, but makes less use of
critical sections. */
do
{
/* If there are no messages in the queue we may have to block. */
if( xTicksToWait > ( portTickType ) 0 )
{
portENTER_CRITICAL();
{
if( xReturn == pdPASS )
{
/* This is the first time through - capture the time
inside the critical section to ensure we attempt to
block at least once. */
vTaskSetTimeOutState( &xTimeOut );
}
if( prvIsQueueEmpty( pxQueue ) )
{
/* Need to call xTaskCheckForTimeout again as time could
have passed since it was last called if this is not the
first time around this loop. */
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
traceBLOCKING_ON_QUEUE_RECEIVE( pxQueue );
#if ( configUSE_MUTEXES == 1 )
{
if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
{
vTaskPriorityInherit( ( void * ) pxQueue->pxMutexHolder );
}
}
#endif
vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToReceive ), xTicksToWait );
taskYIELD();
}
}
}
portEXIT_CRITICAL();
}
taskENTER_CRITICAL();
{
if( pxQueue->uxMessagesWaiting > ( unsigned portBASE_TYPE ) 0 )
{
/* Remember our read position in case we are just peeking. */
pcOriginalReadPosition = pxQueue->pcReadFrom;
prvCopyDataFromQueue( pxQueue, pvBuffer );
if( xJustPeeking == pdFALSE )
{
traceQUEUE_RECEIVE( pxQueue );
/* We are actually removing data. */
--( pxQueue->uxMessagesWaiting );
#if ( configUSE_MUTEXES == 1 )
{
if( pxQueue->uxQueueType == queueQUEUE_IS_MUTEX )
{
/* Record the information required to implement
priority inheritance should it become necessary. */
pxQueue->pxMutexHolder = xTaskGetCurrentTaskHandle();
}
}
#endif
if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToSend ) ) == pdFALSE )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToSend ) ) == pdTRUE )
{
taskYIELD();
}
}
}
else
{
traceQUEUE_PEEK( pxQueue );
/* We are not removing the data, so reset our read
pointer. */
pxQueue->pcReadFrom = pcOriginalReadPosition;
/* The data is being left in the queue, so see if there are
any other tasks waiting for the data. */
if( !listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) )
{
/* Tasks that are removed from the event list will get added to
the pending ready list as the scheduler is still suspended. */
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) != pdFALSE )
{
/* The task waiting has a higher priority that this task. */
taskYIELD();
}
}
}
xReturn = pdPASS;
}
else
{
xReturn = errQUEUE_EMPTY;
}
}
taskEXIT_CRITICAL();
if( xReturn == errQUEUE_EMPTY )
{
if( xTicksToWait > ( portTickType ) 0 )
{
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
xReturn = queueERRONEOUS_UNBLOCK;
}
else
{
traceQUEUE_RECEIVE_FAILED( pxQueue );
}
}
else
{
traceQUEUE_RECEIVE_FAILED( pxQueue );
}
}
} while( xReturn == queueERRONEOUS_UNBLOCK );
return xReturn;
}
signed portBASE_TYPE xQueueAltGenericSend( xQueueHandle pxQueue, const void * const pvItemToQueue, portTickType xTicksToWait, portBASE_TYPE xCopyPosition )
{
signed portBASE_TYPE xReturn = pdPASS;
xTimeOutType xTimeOut;
/* The source code that implements the alternative (Alt) API is
simpler because it makes more use of critical sections. This is
the approach taken by many other RTOSes, but FreeRTOS.org has the
preferred fully featured API too. The fully featured API has more
complex code that takes longer to execute, but makes less use of
critical sections. */
do
{
/* If xTicksToWait is zero then we are not going to block even
if there is no room in the queue to post. */
if( xTicksToWait > ( portTickType ) 0 )
{
portENTER_CRITICAL();
{
if( xReturn == pdPASS )
{
/* This is the first time through - capture the time
inside the critical section to ensure we attempt to
block at least once. */
vTaskSetTimeOutState( &xTimeOut );
}
if( prvIsQueueFull( pxQueue ) )
{
/* Need to call xTaskCheckForTimeout again as time could
have passed since it was last called if this is not the
first time around this loop. */
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
traceBLOCKING_ON_QUEUE_SEND( pxQueue );
vTaskPlaceOnEventList( &( pxQueue->xTasksWaitingToSend ), xTicksToWait );
/* This will exit the critical section, then re-enter when
the task next runs. */
taskYIELD();
}
}
}
portEXIT_CRITICAL();
}
/* Higher priority tasks and interrupts can execute during
this time and could possible refill the queue - even if we
unblocked because space became available. */
taskENTER_CRITICAL();
{
/* Is there room on the queue now? To be running we must be
the highest priority task wanting to access the queue. */
if( pxQueue->uxMessagesWaiting < pxQueue->uxLength )
{
traceQUEUE_SEND( pxQueue );
prvCopyDataToQueue( pxQueue, pvItemToQueue, xCopyPosition );
xReturn = pdPASS;
/* If there was a task waiting for data to arrive on the
queue then unblock it now. */
if( listLIST_IS_EMPTY( &( pxQueue->xTasksWaitingToReceive ) ) == pdFALSE )
{
if( xTaskRemoveFromEventList( &( pxQueue->xTasksWaitingToReceive ) ) == pdTRUE )
{
/* The unblocked task has a priority higher than
our own so yield immediately. */
taskYIELD();
}
}
}
else
{
/* Setting xReturn to errQUEUE_FULL will force its timeout
to be re-evaluated. This is necessary in case interrupts
and higher priority tasks accessed the queue between this
task being unblocked and subsequently attempting to write
to the queue. */
xReturn = errQUEUE_FULL;
}
}
taskEXIT_CRITICAL();
if( xReturn == errQUEUE_FULL )
{
if( xTicksToWait > ( portTickType ) 0 )
{
if( xTaskCheckForTimeOut( &xTimeOut, &xTicksToWait ) == pdFALSE )
{
xReturn = queueERRONEOUS_UNBLOCK;
}
else
{
traceQUEUE_SEND_FAILED( pxQueue );
}
}
else
{
traceQUEUE_SEND_FAILED( pxQueue );
}
}
}
while( xReturn == queueERRONEOUS_UNBLOCK );
return xReturn;
}