int setLanguage (char * key, int forced) {
int i;
if (!languages) loadLanguageList();
for (i = 0; i < numLanguages; i++) {
if (!strcmp(languages[i].lc_all, key)) {
return setupLanguage(i, forced | !FL_KICKSTART(flags));
}
}
/* we didn't specify anything that's exactly in the lang-table. check
* against short forms and nicks */
for (i = 0; i < numLanguages; i++) {
if (!strcmp(getLangShortForm(languages[i].lc_all), key)) {
return setupLanguage(i, forced | !FL_KICKSTART(flags));
}
}
for (i = 0; i < numLanguages; i++) {
if (!strcmp(getLangNick(languages[i].lc_all), key)) {
return setupLanguage(i, forced | !FL_KICKSTART(flags));
}
}
logMessage(ERROR, "unable to set to requested language %s", key);
return -1;
}
int getLangInfo(struct langInfo ** langs) {
if (!languages)
loadLanguageList();
*langs = languages;
return numLanguages;
}
KCLanguageConfigure::KCLanguageConfigure()
{
//Set default settings.
languageFileDir=qApp->applicationDirPath() + "/Locale/";
//Load Language File List.
loadLanguageList();
//Set Default Language.
QLocale::setDefault(QLocale(QLocale::system().language(), QLocale::system().country()));
currLanguageName=QLocale::system().name();
setLanguage(currLanguageName);
}
void KLocaleConfig::loadSettings()
{
KSimpleConfig config(QDir::homeDirPath()+"/.kderc");
loadLanguageList(combo1);
loadLanguageList(combo2);
loadLanguageList(combo3);
// This code is adopted from klocale.cpp
QString languages, lang;
int i=0, pos;
config.setGroup("Locale");
languages = config.readEntry("Language");
while (1) {
lang = languages.left(languages.find(':'));
languages = languages.right(languages.length() - lang.length() - 1);
if (lang.isEmpty() || lang == "C")
break;
i++;
switch (i) {
case 1: pos = tags.find(lang);
if (pos >= 0)
combo1->setCurrentItem(pos);
break;
case 2: pos = tags.find(lang);
if (pos >= 0)
combo2->setCurrentItem(pos);
break;
case 3: pos = tags.find(lang);
if (pos >= 0)
combo3->setCurrentItem(pos);
break;
default: return;
}
}
}
int chooseLanguage(char ** lang) {
int choice = 0;
char ** langs;
int i;
int current = -1;
char * currentLangName = getenv("LANG");
int numLangs = 0;
char * langPicked;
if (!languages) loadLanguageList();
langs = alloca(sizeof(*langs) * (numLanguages + 1));
for (i = 0; i < numLanguages; i++) {
if (!strncmp(languages[i].key, "en", 2))
english = numLangs;
if (currentLangName &&
!strcmp(languages[i].lang, currentLangName))
current = numLangs;
langs[numLangs++] = languages[i].lang;
}
langs[numLangs] = NULL;
if (current >= 0)
choice = current;
else
choice = english;
if (!FL_CMDLINE(flags))
newtWinMenu(_("Choose a Language"),
_("What language would you like to use during the "
"installation process?"), 40, 5, 5, 8,
langs, &choice, _("OK"), NULL);
langPicked = langs[choice];
for (i = 0; i < numLanguages; i++) {
if (!strcmp(langPicked, languages[i].lang)) {
*lang = languages[i].lc_all;
choice = i;
break;
}
}
/* this can't happen */
if (i == numLanguages) abort();
return setupLanguage(choice, 0);
}
TDMAppearanceWidget::TDMAppearanceWidget(TQWidget *parent, const char *name)
: TQWidget(parent, name), sakwarning(0)
{
TQString wtstr;
TQVBoxLayout *vbox = new TQVBoxLayout(this, KDialog::marginHint(),
KDialog::spacingHint(), "vbox");
TQGroupBox *group = new TQGroupBox(i18n("Appearance"), this);
vbox->addWidget(group);
TQGridLayout *grid = new TQGridLayout( group, 5, 2, KDialog::marginHint(),
KDialog::spacingHint(), "grid");
grid->addRowSpacing(0, group->fontMetrics().height());
grid->setColStretch(0, 1);
grid->setColStretch(1, 1);
TQHBoxLayout *hlay = new TQHBoxLayout( KDialog::spacingHint() );
grid->addMultiCellLayout(hlay, 1,1, 0,1);
greetstr_lined = new KLineEdit(group);
TQLabel *label = new TQLabel(greetstr_lined, i18n("&Greeting:"), group);
hlay->addWidget(label);
connect(greetstr_lined, TQT_SIGNAL(textChanged(const TQString&)),
TQT_SLOT(changed()));
hlay->addWidget(greetstr_lined);
wtstr = i18n("This is the \"headline\" for TDM's login window. You may want to "
"put some nice greeting or information about the operating system here.<p>"
"TDM will substitute the following character pairs with the "
"respective contents:<br><ul>"
"<li>%d -> current display</li>"
"<li>%h -> host name, possibly with domain name</li>"
"<li>%n -> node name, most probably the host name without domain name</li>"
"<li>%s -> the operating system</li>"
"<li>%r -> the operating system's version</li>"
"<li>%m -> the machine (hardware) type</li>"
"<li>%% -> a single %</li>"
"</ul>" );
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( greetstr_lined, wtstr );
TQGridLayout *hglay = new TQGridLayout( 3, 4, KDialog::spacingHint() );
grid->addMultiCellLayout(hglay, 2,4, 0,0);
label = new TQLabel(i18n("Logo area:"), group);
hglay->addWidget(label, 0, 0);
TQVBoxLayout *vlay = new TQVBoxLayout( KDialog::spacingHint() );
hglay->addMultiCellLayout(vlay, 0,0, 1,2);
noneRadio = new TQRadioButton( i18n("logo area", "&None"), group );
clockRadio = new TQRadioButton( i18n("Show cloc&k"), group );
logoRadio = new TQRadioButton( i18n("Sho&w logo"), group );
TQButtonGroup *buttonGroup = new TQButtonGroup( group );
label->setBuddy( buttonGroup );
connect( buttonGroup, TQT_SIGNAL(clicked(int)), TQT_SLOT(slotAreaRadioClicked(int)) );
connect( buttonGroup, TQT_SIGNAL(clicked(int)), TQT_SLOT(changed()) );
buttonGroup->hide();
buttonGroup->insert(noneRadio, KdmNone);
buttonGroup->insert(clockRadio, KdmClock);
buttonGroup->insert(logoRadio, KdmLogo);
vlay->addWidget(noneRadio);
vlay->addWidget(clockRadio);
vlay->addWidget(logoRadio);
wtstr = i18n("You can choose to display a custom logo (see below), a clock or no logo at all.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( noneRadio, wtstr );
TQWhatsThis::add( logoRadio, wtstr );
TQWhatsThis::add( clockRadio, wtstr );
logoLabel = new TQLabel(i18n("&Logo:"), group);
logobutton = new TQPushButton(group);
logoLabel->setBuddy( logobutton );
logobutton->setAutoDefault(false);
logobutton->setAcceptDrops(true);
logobutton->installEventFilter(this); // for drag and drop
connect(logobutton, TQT_SIGNAL(clicked()), TQT_SLOT(slotLogoButtonClicked()));
hglay->addWidget(logoLabel, 1, 0);
hglay->addWidget(logobutton, 1, 1, Qt::AlignCenter);
hglay->addRowSpacing(1, 110);
wtstr = i18n("Click here to choose an image that TDM will display. "
"You can also drag and drop an image onto this button "
"(e.g. from Konqueror).");
TQWhatsThis::add( logoLabel, wtstr );
TQWhatsThis::add( logobutton, wtstr );
hglay->addRowSpacing( 2, KDialog::spacingHint());
hglay->setColStretch( 3, 1);
hglay = new TQGridLayout( 2, 3, KDialog::spacingHint() );
grid->addLayout(hglay, 2, 1);
label = new TQLabel(i18n("Position:"), group);
hglay->addMultiCellWidget(label, 0,1, 0,0, Qt::AlignVCenter);
TQValidator *posValidator = new TQIntValidator(0, 100, TQT_TQOBJECT(group));
TQLabel *xLineLabel = new TQLabel(i18n("&X:"), group);
hglay->addWidget(xLineLabel, 0, 1);
xLineEdit = new TQLineEdit (group);
connect( xLineEdit, TQT_SIGNAL( textChanged(const TQString&) ), TQT_SLOT( changed() ));
hglay->addWidget(xLineEdit, 0, 2);
xLineLabel->setBuddy(xLineEdit);
xLineEdit->setValidator(posValidator);
TQLabel *yLineLabel = new TQLabel(i18n("&Y:"), group);
hglay->addWidget(yLineLabel, 1, 1);
yLineEdit = new TQLineEdit (group);
connect( yLineEdit, TQT_SIGNAL( textChanged(const TQString&) ), TQT_SLOT( changed() ));
hglay->addWidget(yLineEdit, 1, 2);
yLineLabel->setBuddy(yLineEdit);
yLineEdit->setValidator(posValidator);
wtstr = i18n("Here you specify the relative coordinates (in percent) of the login dialog's <em>center</em>.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( xLineLabel, wtstr );
TQWhatsThis::add( xLineEdit, wtstr );
TQWhatsThis::add( yLineLabel, wtstr );
TQWhatsThis::add( yLineEdit, wtstr );
hglay->setColStretch( 3, 1);
hglay->setRowStretch( 2, 1);
hglay = new TQGridLayout( 2, 3, KDialog::spacingHint() );
grid->addLayout(hglay, 3, 1);
hglay->setColStretch(3, 1);
compositorcombo = new KBackedComboBox(group);
compositorcombo->insertItem( "", i18n("None") );
compositorcombo->insertItem( TDE_COMPOSITOR_BINARY, i18n("Trinity compositor") );
label = new TQLabel(compositorcombo, i18n("Compositor:"), group);
connect(compositorcombo, TQT_SIGNAL(activated(int)), TQT_SLOT(changed()));
hglay->addWidget(label, 0, 0);
hglay->addWidget(compositorcombo, 0, 1);
wtstr = i18n("Choose a compositor to be used in TDM. Note that the chosen compositor will continue to run after login.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( compositorcombo, wtstr );
guicombo = new KBackedComboBox(group);
guicombo->insertItem( "", i18n("<default>") );
loadGuiStyles(guicombo);
guicombo->listBox()->sort();
label = new TQLabel(guicombo, i18n("GUI s&tyle:"), group);
connect(guicombo, TQT_SIGNAL(activated(int)), TQT_SLOT(changed()));
hglay->addWidget(label, 1, 0);
hglay->addWidget(guicombo, 1, 1);
wtstr = i18n("You can choose a basic GUI style here that will be "
"used by TDM only.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( guicombo, wtstr );
colcombo = new KBackedComboBox(group);
colcombo->insertItem( "", i18n("<default>") );
loadColorSchemes(colcombo);
colcombo->listBox()->sort();
label = new TQLabel(colcombo, i18n("&Color scheme:"), group);
connect(colcombo, TQT_SIGNAL(activated(int)), TQT_SLOT(changed()));
hglay->addWidget(label, 2, 0);
hglay->addWidget(colcombo, 2, 1);
wtstr = i18n("You can choose a basic Color Scheme here that will be "
"used by TDM only.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( colcombo, wtstr );
echocombo = new KBackedComboBox(group);
echocombo->insertItem("NoEcho", i18n("No Echo"));
echocombo->insertItem("OneStar", i18n("One Star"));
echocombo->insertItem("ThreeStars", i18n("Three Stars"));
label = new TQLabel(echocombo, i18n("Echo &mode:"), group);
connect(echocombo, TQT_SIGNAL(activated(int)), TQT_SLOT(changed()));
hglay->addWidget(label, 3, 0);
hglay->addWidget(echocombo, 3, 1);
wtstr = i18n("You can choose whether and how TDM shows your password when you type it.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( echocombo, wtstr );
// The Language group box
group = new TQGroupBox(0, Qt::Vertical, i18n("Locale"), this);
vbox->addWidget(group);
langcombo = new KLanguageButton(group);
loadLanguageList(langcombo);
connect(langcombo, TQT_SIGNAL(activated(const TQString &)), TQT_SLOT(changed()));
label = new TQLabel(langcombo, i18n("Languag&e:"), group);
TQGridLayout *hbox = new TQGridLayout( group->layout(), 2, 2, KDialog::spacingHint() );
hbox->setColStretch(1, 1);
hbox->addWidget(label, 1, 0);
hbox->addWidget(langcombo, 1, 1);
wtstr = i18n("Here you can choose the language used by TDM. This setting does not affect"
" a user's personal settings; that will take effect after login.");
TQWhatsThis::add( label, wtstr );
TQWhatsThis::add( langcombo, wtstr );
// The SAK group box
group = new TQGroupBox(0, Qt::Vertical, i18n("Secure Attention Key"), this);
vbox->addWidget(group);
sakbox = new TQCheckBox( i18n("Enable Secure Attention Key"), group );
connect( sakbox, TQT_SIGNAL(toggled(bool)), TQT_SLOT(changed()) );
TQGridLayout *hbox2 = new TQGridLayout( group->layout(), 2, 2, KDialog::spacingHint() );
hbox2->setColStretch(1, 1);
hbox2->addWidget(sakbox, 1, 0);
if (getuid() == 0 && config->checkConfigFilesWritable( true )) {
if (system(KDE_BINDIR "/tsak checkdeps") != 0) {
sakbox->setEnabled(false);
sakwarning = new TQLabel( i18n("Secure Attention Key support is not available on your system. Please check for the presence of evdev and uinput."), group );
hbox2->addWidget(sakwarning, 2, 0);
}
}
wtstr = i18n("Here you can enable or disable the Secure Attention Key [SAK] anti-spoofing measure.");
TQWhatsThis::add( sakbox, wtstr );
vbox->addStretch(1);
}
KDMAppearanceWidget::KDMAppearanceWidget(QWidget *parent, const char *name)
: QWidget(parent, name)
{
QString wtstr;
QVBoxLayout *vbox = new QVBoxLayout(this, KDialog::marginHint(),
KDialog::spacingHint(), "vbox");
QGroupBox *group = new QGroupBox(i18n("Appearance"), this);
vbox->addWidget(group);
QGridLayout *grid = new QGridLayout( group, 5, 2, KDialog::marginHint(),
KDialog::spacingHint(), "grid");
grid->addRowSpacing(0, group->fontMetrics().height());
grid->setColStretch(0, 1);
grid->setColStretch(1, 1);
QHBoxLayout *hlay = new QHBoxLayout( KDialog::spacingHint() );
grid->addMultiCellLayout(hlay, 1,1, 0,1);
greetstr_lined = new KLineEdit(group);
QLabel *label = new QLabel(greetstr_lined, i18n("&Greeting:"), group);
hlay->addWidget(label);
connect(greetstr_lined, SIGNAL(textChanged(const QString&)),
SLOT(changed()));
hlay->addWidget(greetstr_lined);
wtstr = i18n("This is the \"headline\" for KDM's login window. You may want to "
"put some nice greeting or information about the operating system here.<p>"
"KDM will substitute the following character pairs with the "
"respective contents:<br><ul>"
"<li>%d -> current display</li>"
"<li>%h -> host name, possibly with domain name</li>"
"<li>%n -> node name, most probably the host name without domain name</li>"
"<li>%s -> the operating system</li>"
"<li>%r -> the operating system's version</li>"
"<li>%m -> the machine (hardware) type</li>"
"<li>%% -> a single %</li>"
"</ul>" );
QWhatsThis::add( label, wtstr );
QWhatsThis::add( greetstr_lined, wtstr );
QGridLayout *hglay = new QGridLayout( 3, 4, KDialog::spacingHint() );
grid->addMultiCellLayout(hglay, 2,4, 0,0);
label = new QLabel(i18n("Logo area:"), group);
hglay->addWidget(label, 0, 0);
QVBoxLayout *vlay = new QVBoxLayout( KDialog::spacingHint() );
hglay->addMultiCellLayout(vlay, 0,0, 1,2);
noneRadio = new QRadioButton( i18n("logo area", "&None"), group );
clockRadio = new QRadioButton( i18n("Show cloc&k"), group );
logoRadio = new QRadioButton( i18n("Sho&w logo"), group );
QButtonGroup *buttonGroup = new QButtonGroup( group );
label->setBuddy( buttonGroup );
connect( buttonGroup, SIGNAL(clicked(int)), SLOT(slotAreaRadioClicked(int)) );
connect( buttonGroup, SIGNAL(clicked(int)), SLOT(changed()) );
buttonGroup->hide();
buttonGroup->insert(noneRadio, KdmNone);
buttonGroup->insert(clockRadio, KdmClock);
buttonGroup->insert(logoRadio, KdmLogo);
vlay->addWidget(noneRadio);
vlay->addWidget(clockRadio);
vlay->addWidget(logoRadio);
wtstr = i18n("You can choose to display a custom logo (see below), a clock or no logo at all.");
QWhatsThis::add( label, wtstr );
QWhatsThis::add( noneRadio, wtstr );
QWhatsThis::add( logoRadio, wtstr );
QWhatsThis::add( clockRadio, wtstr );
logoLabel = new QLabel(i18n("&Logo:"), group);
logobutton = new QPushButton(group);
logoLabel->setBuddy( logobutton );
logobutton->setAutoDefault(false);
logobutton->setAcceptDrops(true);
logobutton->installEventFilter(this); // for drag and drop
connect(logobutton, SIGNAL(clicked()), SLOT(slotLogoButtonClicked()));
hglay->addWidget(logoLabel, 1, 0);
hglay->addWidget(logobutton, 1, 1, AlignCenter);
hglay->addRowSpacing(1, 110);
wtstr = i18n("Click here to choose an image that KDM will display. "
"You can also drag and drop an image onto this button "
"(e.g. from Konqueror).");
QWhatsThis::add( logoLabel, wtstr );
QWhatsThis::add( logobutton, wtstr );
hglay->addRowSpacing( 2, KDialog::spacingHint());
hglay->setColStretch( 3, 1);
hglay = new QGridLayout( 2, 3, KDialog::spacingHint() );
grid->addLayout(hglay, 2, 1);
label = new QLabel(i18n("Position:"), group);
hglay->addMultiCellWidget(label, 0,1, 0,0, AlignVCenter);
QValidator *posValidator = new QIntValidator(0, 100, group);
QLabel *xLineLabel = new QLabel(i18n("&X:"), group);
hglay->addWidget(xLineLabel, 0, 1);
xLineEdit = new QLineEdit (group);
connect( xLineEdit, SIGNAL( textChanged(const QString&) ), SLOT( changed() ));
hglay->addWidget(xLineEdit, 0, 2);
xLineLabel->setBuddy(xLineEdit);
xLineEdit->setValidator(posValidator);
QLabel *yLineLabel = new QLabel(i18n("&Y:"), group);
hglay->addWidget(yLineLabel, 1, 1);
yLineEdit = new QLineEdit (group);
connect( yLineEdit, SIGNAL( textChanged(const QString&) ), SLOT( changed() ));
hglay->addWidget(yLineEdit, 1, 2);
yLineLabel->setBuddy(yLineEdit);
yLineEdit->setValidator(posValidator);
wtstr = i18n("Here you specify the relative coordinates (in percent) of the login dialog's <em>center</em>.");
QWhatsThis::add( label, wtstr );
QWhatsThis::add( xLineLabel, wtstr );
QWhatsThis::add( xLineEdit, wtstr );
QWhatsThis::add( yLineLabel, wtstr );
QWhatsThis::add( yLineEdit, wtstr );
hglay->setColStretch( 3, 1);
hglay->setRowStretch( 2, 1);
hglay = new QGridLayout( 2, 3, KDialog::spacingHint() );
grid->addLayout(hglay, 3, 1);
hglay->setColStretch(3, 1);
guicombo = new KBackedComboBox(group);
guicombo->insertItem( "", i18n("<default>") );
loadGuiStyles(guicombo);
guicombo->listBox()->sort();
label = new QLabel(guicombo, i18n("GUI s&tyle:"), group);
connect(guicombo, SIGNAL(activated(int)), SLOT(changed()));
hglay->addWidget(label, 0, 0);
hglay->addWidget(guicombo, 0, 1);
wtstr = i18n("You can choose a basic GUI style here that will be "
"used by KDM only.");
QWhatsThis::add( label, wtstr );
QWhatsThis::add( guicombo, wtstr );
colcombo = new KBackedComboBox(group);
colcombo->insertItem( "", i18n("<default>") );
loadColorSchemes(colcombo);
colcombo->listBox()->sort();
label = new QLabel(colcombo, i18n("&Color scheme:"), group);
connect(colcombo, SIGNAL(activated(int)), SLOT(changed()));
hglay->addWidget(label, 1, 0);
hglay->addWidget(colcombo, 1, 1);
wtstr = i18n("You can choose a basic Color Scheme here that will be "
"used by KDM only.");
QWhatsThis::add( label, wtstr );
QWhatsThis::add( colcombo, wtstr );
echocombo = new KBackedComboBox(group);
echocombo->insertItem("NoEcho", i18n("No Echo"));
echocombo->insertItem("OneStar", i18n("One Star"));
echocombo->insertItem("ThreeStars", i18n("Three Stars"));
label = new QLabel(echocombo, i18n("Echo &mode:"), group);
connect(echocombo, SIGNAL(activated(int)), SLOT(changed()));
hglay->addWidget(label, 2, 0);
hglay->addWidget(echocombo, 2, 1);
wtstr = i18n("You can choose whether and how KDM shows your password when you type it.");
QWhatsThis::add( label, wtstr );
QWhatsThis::add( echocombo, wtstr );
// The Language group box
group = new QGroupBox(0, Vertical, i18n("Locale"), this);
vbox->addWidget(group);
langcombo = new KLanguageButton(group);
loadLanguageList(langcombo);
connect(langcombo, SIGNAL(activated(const QString &)), SLOT(changed()));
label = new QLabel(langcombo, i18n("Languag&e:"), group);
QGridLayout *hbox = new QGridLayout( group->layout(), 2, 2, KDialog::spacingHint() );
hbox->setColStretch(1, 1);
hbox->addWidget(label, 1, 0);
hbox->addWidget(langcombo, 1, 1);
wtstr = i18n("Here you can choose the language used by KDM. This setting does not affect"
" a user's personal settings; that will take effect after login.");
QWhatsThis::add( label, wtstr );
QWhatsThis::add( langcombo, wtstr );
vbox->addStretch(1);
}
