/* Initialize the ssp module */
static int lpcspifi_set_sw_mode(struct flash_bank *bank)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
uint32_t ssp_base = lpcspifi_info->ssp_base;
uint32_t io_base = lpcspifi_info->io_base;
uint32_t ioconfig_base = lpcspifi_info->ioconfig_base;
int retval = ERROR_OK;
/* Re-initialize SPIFI. There are a couple of errata on this, so this makes
sure that nothing's in an unhappy state. */
retval = lpcspifi_set_hw_mode(bank);
/* If we couldn't initialize hardware mode, don't even bother continuing */
if (retval != ERROR_OK)
return retval;
/* Initialize the pins */
retval = ioconfig_write_reg(target, ioconfig_base, 0x194, 0x00000040);
if (retval == ERROR_OK)
retval = ioconfig_write_reg(target, ioconfig_base, 0x1a0, 0x00000044);
if (retval == ERROR_OK)
retval = ioconfig_write_reg(target, ioconfig_base, 0x190, 0x00000040);
if (retval == ERROR_OK)
retval = ioconfig_write_reg(target, ioconfig_base, 0x19c, 0x000000ed);
if (retval == ERROR_OK)
retval = ioconfig_write_reg(target, ioconfig_base, 0x198, 0x000000ed);
if (retval == ERROR_OK)
retval = ioconfig_write_reg(target, ioconfig_base, 0x18c, 0x000000ea);
/* Set CS high & as an output */
if (retval == ERROR_OK)
retval = io_write_reg(target, io_base, 0x12ac, 0xffffffff);
if (retval == ERROR_OK)
retval = io_write_reg(target, io_base, 0x2014, 0x00000800);
/* Initialize the module */
if (retval == ERROR_OK)
retval = ssp_write_reg(target, ssp_base, SSP_CR0, 0x00000007);
if (retval == ERROR_OK)
retval = ssp_write_reg(target, ssp_base, SSP_CR1, 0x00000000);
if (retval == ERROR_OK)
retval = ssp_write_reg(target, ssp_base, SSP_CPSR, 0x00000008);
if (retval == ERROR_OK)
retval = ssp_write_reg(target, ssp_base, SSP_CR1, 0x00000002);
/* If something didn't work out, attempt to return SPIFI to HW mode */
if (retval != ERROR_OK)
lpcspifi_set_hw_mode(bank);
return retval;
}
static int lpcspifi_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
uint32_t ssp_base;
uint32_t io_base;
uint32_t ioconfig_base;
struct flash_sector *sectors;
uint32_t id = 0; /* silence uninitialized warning */
struct lpcspifi_target *target_device;
int retval;
/* If we've already probed, we should be fine to skip this time. */
if (lpcspifi_info->probed)
return ERROR_OK;
lpcspifi_info->probed = 0;
for (target_device = target_devices ; target_device->name ; ++target_device)
if (target_device->tap_idcode == target->tap->idcode)
break;
if (!target_device->name) {
LOG_ERROR("Device ID 0x%" PRIx32 " is not known as SPIFI capable",
target->tap->idcode);
return ERROR_FAIL;
}
ssp_base = target_device->ssp_base;
io_base = target_device->io_base;
ioconfig_base = target_device->ioconfig_base;
lpcspifi_info->ssp_base = ssp_base;
lpcspifi_info->io_base = io_base;
lpcspifi_info->ioconfig_base = ioconfig_base;
lpcspifi_info->bank_num = bank->bank_number;
LOG_DEBUG("Valid SPIFI on device %s at address 0x%" PRIx32,
target_device->name, bank->base);
/* read and decode flash ID; returns in SW mode */
retval = lpcspifi_read_flash_id(bank, &id);
if (retval != ERROR_OK)
return retval;
retval = lpcspifi_set_hw_mode(bank);
if (retval != ERROR_OK)
return retval;
lpcspifi_info->dev = NULL;
for (struct flash_device *p = flash_devices; p->name ; p++)
if (p->device_id == id) {
lpcspifi_info->dev = p;
break;
}
if (!lpcspifi_info->dev) {
LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id);
return ERROR_FAIL;
}
LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")",
lpcspifi_info->dev->name, lpcspifi_info->dev->device_id);
/* Set correct size value */
bank->size = lpcspifi_info->dev->size_in_bytes;
/* create and fill sectors array */
bank->num_sectors =
lpcspifi_info->dev->size_in_bytes / lpcspifi_info->dev->sectorsize;
sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
if (sectors == NULL) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
for (int sector = 0; sector < bank->num_sectors; sector++) {
sectors[sector].offset = sector * lpcspifi_info->dev->sectorsize;
sectors[sector].size = lpcspifi_info->dev->sectorsize;
sectors[sector].is_erased = -1;
sectors[sector].is_protected = 0;
}
bank->sectors = sectors;
lpcspifi_info->probed = 1;
return ERROR_OK;
}
static int lpcspifi_write(struct flash_bank *bank, uint8_t *buffer,
uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
uint32_t page_size, fifo_size;
struct working_area *fifo;
struct reg_param reg_params[5];
struct armv7m_algorithm armv7m_info;
struct working_area *write_algorithm;
int sector;
int retval = ERROR_OK;
LOG_DEBUG("offset=0x%08" PRIx32 " count=0x%08" PRIx32,
offset, count);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if (offset + count > lpcspifi_info->dev->size_in_bytes) {
LOG_WARNING("Writes past end of flash. Extra data discarded.");
count = lpcspifi_info->dev->size_in_bytes - offset;
}
/* Check sector protection */
for (sector = 0; sector < bank->num_sectors; sector++) {
/* Start offset in or before this sector? */
/* End offset in or behind this sector? */
if ((offset <
(bank->sectors[sector].offset + bank->sectors[sector].size))
&& ((offset + count - 1) >= bank->sectors[sector].offset)
&& bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
page_size = lpcspifi_info->dev->pagesize;
retval = lpcspifi_set_hw_mode(bank);
if (retval != ERROR_OK)
return retval;
/* see contrib/loaders/flash/lpcspifi_write.S for src */
static const uint8_t lpcspifi_flash_write_code[] = {
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x08, 0x0a,
0x4f, 0xf0, 0xea, 0x08, 0xca, 0xf8, 0x8c, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x90, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x94, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x98, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x9c, 0x81,
0x4f, 0xf0, 0x44, 0x08, 0xca, 0xf8, 0xa0, 0x81,
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf4, 0x00, 0x68, 0xca, 0xf8, 0x14, 0x80,
0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf0, 0xff, 0x08, 0xca, 0xf8, 0xab, 0x80,
0x4f, 0xf0, 0x00, 0x0a, 0xc4, 0xf2, 0x05, 0x0a,
0x4f, 0xf0, 0x00, 0x08, 0xc0, 0xf2, 0x00, 0x18,
0xca, 0xf8, 0x94, 0x80, 0x4f, 0xf4, 0x00, 0x5a,
0xc4, 0xf2, 0x05, 0x0a, 0x4f, 0xf0, 0x01, 0x08,
0xca, 0xf8, 0x00, 0x87, 0x4f, 0xf4, 0x40, 0x5a,
0xc4, 0xf2, 0x08, 0x0a, 0x4f, 0xf0, 0x07, 0x08,
0xca, 0xf8, 0x00, 0x80, 0x4f, 0xf0, 0x02, 0x08,
0xca, 0xf8, 0x10, 0x80, 0xca, 0xf8, 0x04, 0x80,
0x4f, 0xf0, 0x00, 0x0b, 0xa3, 0x44, 0x93, 0x45,
0x7f, 0xf6, 0xfc, 0xaf, 0x00, 0xf0, 0x6a, 0xf8,
0x4f, 0xf0, 0x06, 0x09, 0x00, 0xf0, 0x53, 0xf8,
0x00, 0xf0, 0x60, 0xf8, 0x00, 0xf0, 0x62, 0xf8,
0x4f, 0xf0, 0x05, 0x09, 0x00, 0xf0, 0x4b, 0xf8,
0x4f, 0xf0, 0x00, 0x09, 0x00, 0xf0, 0x47, 0xf8,
0x00, 0xf0, 0x54, 0xf8, 0x19, 0xf0, 0x02, 0x0f,
0x00, 0xf0, 0x5d, 0x80, 0x00, 0xf0, 0x52, 0xf8,
0x4f, 0xf0, 0x02, 0x09, 0x00, 0xf0, 0x3b, 0xf8,
0x4f, 0xea, 0x12, 0x49, 0x00, 0xf0, 0x37, 0xf8,
0x4f, 0xea, 0x12, 0x29, 0x00, 0xf0, 0x33, 0xf8,
0x4f, 0xea, 0x02, 0x09, 0x00, 0xf0, 0x2f, 0xf8,
0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1, 0x00, 0x0f,
0x00, 0xf0, 0x47, 0x80, 0x47, 0x68, 0x47, 0x45,
0x3f, 0xf4, 0xf6, 0xaf, 0x17, 0xf8, 0x01, 0x9b,
0x00, 0xf0, 0x21, 0xf8, 0x8f, 0x42, 0x28, 0xbf,
0x00, 0xf1, 0x08, 0x07, 0x47, 0x60, 0x01, 0x3b,
0xbb, 0xb3, 0x02, 0xf1, 0x01, 0x02, 0x93, 0x45,
0x7f, 0xf4, 0xe6, 0xaf, 0x00, 0xf0, 0x22, 0xf8,
0xa3, 0x44, 0x00, 0xf0, 0x23, 0xf8, 0x4f, 0xf0,
0x05, 0x09, 0x00, 0xf0, 0x0c, 0xf8, 0x4f, 0xf0,
0x00, 0x09, 0x00, 0xf0, 0x08, 0xf8, 0x00, 0xf0,
0x15, 0xf8, 0x19, 0xf0, 0x01, 0x0f, 0x7f, 0xf4,
0xf0, 0xaf, 0xff, 0xf7, 0xa7, 0xbf, 0x4f, 0xf4,
0x40, 0x5a, 0xc4, 0xf2, 0x08, 0x0a, 0xca, 0xf8,
0x08, 0x90, 0xda, 0xf8, 0x0c, 0x90, 0x19, 0xf0,
0x10, 0x0f, 0x7f, 0xf4, 0xfa, 0xaf, 0xda, 0xf8,
0x08, 0x90, 0x70, 0x47, 0x4f, 0xf0, 0xff, 0x08,
0x00, 0xf0, 0x02, 0xb8, 0x4f, 0xf0, 0x00, 0x08,
0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0xca, 0xf8, 0xab, 0x80, 0x70, 0x47, 0x00, 0x20,
0x50, 0x60, 0x30, 0x46, 0x00, 0xbe, 0xff, 0xff
};
if (target_alloc_working_area(target, sizeof(lpcspifi_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_ERROR("Insufficient working area. You must configure"\
" a working area > %zdB in order to write to SPIFI flash.",
sizeof(lpcspifi_flash_write_code));
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
retval = target_write_buffer(target, write_algorithm->address,
sizeof(lpcspifi_flash_write_code),
lpcspifi_flash_write_code);
if (retval != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return retval;
}
/* FIFO allocation */
fifo_size = target_get_working_area_avail(target);
if (fifo_size == 0) {
/* if we already allocated the writing code but failed to get fifo
* space, free the algorithm */
target_free_working_area(target, write_algorithm);
LOG_ERROR("Insufficient working area. Please allocate at least"\
" %zdB of working area to enable flash writes.",
sizeof(lpcspifi_flash_write_code) + 1
);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
} else if (fifo_size < page_size)
LOG_WARNING("Working area size is limited; flash writes may be"\
" slow. Increase working area size to at least %zdB"\
" to reduce write times.",
(size_t)(sizeof(lpcspifi_flash_write_code) + page_size)
);
else if (fifo_size > 0x2000) /* Beyond this point, we start to get diminishing returns */
fifo_size = 0x2000;
if (target_alloc_working_area(target, fifo_size, &fifo) != ERROR_OK) {
target_free_working_area(target, write_algorithm);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* buffer start, status (out) */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer end */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* target address */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* count (halfword-16bit) */
init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* page size */
buf_set_u32(reg_params[0].value, 0, 32, fifo->address);
buf_set_u32(reg_params[1].value, 0, 32, fifo->address + fifo->size);
buf_set_u32(reg_params[2].value, 0, 32, offset);
buf_set_u32(reg_params[3].value, 0, 32, count);
buf_set_u32(reg_params[4].value, 0, 32, page_size);
retval = target_run_flash_async_algorithm(target, buffer, count, 1,
0, NULL,
5, reg_params,
fifo->address, fifo->size,
write_algorithm->address, 0,
&armv7m_info
);
if (retval != ERROR_OK)
LOG_ERROR("Error executing flash write algorithm");
target_free_working_area(target, fifo);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
/* Switch to HW mode before return to prompt */
retval = lpcspifi_set_hw_mode(bank);
return retval;
}
static int lpcspifi_erase(struct flash_bank *bank, int first, int last)
{
struct target *target = bank->target;
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
struct reg_param reg_params[4];
struct armv7m_algorithm armv7m_info;
struct working_area *erase_algorithm;
int retval = ERROR_OK;
int sector;
LOG_DEBUG("erase from sector %d to sector %d", first, last);
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
LOG_ERROR("Flash sector invalid");
return ERROR_FLASH_SECTOR_INVALID;
}
if (!(lpcspifi_info->probed)) {
LOG_ERROR("Flash bank not probed");
return ERROR_FLASH_BANK_NOT_PROBED;
}
for (sector = first; sector <= last; sector++) {
if (bank->sectors[sector].is_protected) {
LOG_ERROR("Flash sector %d protected", sector);
return ERROR_FAIL;
}
}
/* If we're erasing the entire chip and the flash supports
* it, use a bulk erase instead of going sector-by-sector. */
if (first == 0 && last == (bank->num_sectors - 1)
&& lpcspifi_info->dev->chip_erase_cmd != lpcspifi_info->dev->erase_cmd) {
LOG_DEBUG("Chip supports the bulk erase command."\
" Will use bulk erase instead of sector-by-sector erase.");
retval = lpcspifi_bulk_erase(bank);
if (retval == ERROR_OK) {
retval = lpcspifi_set_hw_mode(bank);
return retval;
} else
LOG_WARNING("Bulk flash erase failed. Falling back to sector-by-sector erase.");
}
retval = lpcspifi_set_hw_mode(bank);
if (retval != ERROR_OK)
return retval;
/* see contrib/loaders/flash/lpcspifi_erase.S for src */
static const uint8_t lpcspifi_flash_erase_code[] = {
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x08, 0x0a,
0x4f, 0xf0, 0xea, 0x08, 0xca, 0xf8, 0x8c, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x90, 0x81,
0x4f, 0xf0, 0x40, 0x08, 0xca, 0xf8, 0x94, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x98, 0x81,
0x4f, 0xf0, 0xed, 0x08, 0xca, 0xf8, 0x9c, 0x81,
0x4f, 0xf0, 0x44, 0x08, 0xca, 0xf8, 0xa0, 0x81,
0x4f, 0xf4, 0xc0, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf4, 0x00, 0x68, 0xca, 0xf8, 0x14, 0x80,
0x4f, 0xf4, 0x80, 0x4a, 0xc4, 0xf2, 0x0f, 0x0a,
0x4f, 0xf0, 0xff, 0x08, 0xca, 0xf8, 0xab, 0x80,
0x4f, 0xf0, 0x00, 0x0a, 0xc4, 0xf2, 0x05, 0x0a,
0x4f, 0xf0, 0x00, 0x08, 0xc0, 0xf2, 0x00, 0x18,
0xca, 0xf8, 0x94, 0x80, 0x4f, 0xf4, 0x00, 0x5a,
0xc4, 0xf2, 0x05, 0x0a, 0x4f, 0xf0, 0x01, 0x08,
0xca, 0xf8, 0x00, 0x87, 0x4f, 0xf4, 0x40, 0x5a,
0xc4, 0xf2, 0x08, 0x0a, 0x4f, 0xf0, 0x07, 0x08,
0xca, 0xf8, 0x00, 0x80, 0x4f, 0xf0, 0x02, 0x08,
0xca, 0xf8, 0x10, 0x80, 0xca, 0xf8, 0x04, 0x80,
0x00, 0xf0, 0x52, 0xf8, 0x4f, 0xf0, 0x06, 0x09,
0x00, 0xf0, 0x3b, 0xf8, 0x00, 0xf0, 0x48, 0xf8,
0x00, 0xf0, 0x4a, 0xf8, 0x4f, 0xf0, 0x05, 0x09,
0x00, 0xf0, 0x33, 0xf8, 0x4f, 0xf0, 0x00, 0x09,
0x00, 0xf0, 0x2f, 0xf8, 0x00, 0xf0, 0x3c, 0xf8,
0x19, 0xf0, 0x02, 0x0f, 0x00, 0xf0, 0x45, 0x80,
0x00, 0xf0, 0x3a, 0xf8, 0x4f, 0xea, 0x02, 0x09,
0x00, 0xf0, 0x23, 0xf8, 0x4f, 0xea, 0x10, 0x49,
0x00, 0xf0, 0x1f, 0xf8, 0x4f, 0xea, 0x10, 0x29,
0x00, 0xf0, 0x1b, 0xf8, 0x4f, 0xea, 0x00, 0x09,
0x00, 0xf0, 0x17, 0xf8, 0x00, 0xf0, 0x24, 0xf8,
0x00, 0xf0, 0x26, 0xf8, 0x4f, 0xf0, 0x05, 0x09,
0x00, 0xf0, 0x0f, 0xf8, 0x4f, 0xf0, 0x00, 0x09,
0x00, 0xf0, 0x0b, 0xf8, 0x00, 0xf0, 0x18, 0xf8,
0x19, 0xf0, 0x01, 0x0f, 0x7f, 0xf4, 0xf0, 0xaf,
0x01, 0x39, 0xf9, 0xb1, 0x18, 0x44, 0xff, 0xf7,
0xbf, 0xbf, 0x4f, 0xf4, 0x40, 0x5a, 0xc4, 0xf2,
0x08, 0x0a, 0xca, 0xf8, 0x08, 0x90, 0xda, 0xf8,
0x0c, 0x90, 0x19, 0xf0, 0x10, 0x0f, 0x7f, 0xf4,
0xfa, 0xaf, 0xda, 0xf8, 0x08, 0x90, 0x70, 0x47,
0x4f, 0xf0, 0xff, 0x08, 0x00, 0xf0, 0x02, 0xb8,
0x4f, 0xf0, 0x00, 0x08, 0x4f, 0xf4, 0x80, 0x4a,
0xc4, 0xf2, 0x0f, 0x0a, 0xca, 0xf8, 0xab, 0x80,
0x70, 0x47, 0x00, 0x20, 0x00, 0xbe, 0xff, 0xff
};
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
/* Get memory for spifi initialization algorithm */
retval = target_alloc_working_area(target, sizeof(lpcspifi_flash_erase_code),
&erase_algorithm);
if (retval != ERROR_OK) {
LOG_ERROR("Insufficient working area. You must configure a working"\
" area of at least %zdB in order to erase SPIFI flash.",
sizeof(lpcspifi_flash_erase_code));
return retval;
}
/* Write algorithm to working area */
retval = target_write_buffer(target, erase_algorithm->address,
sizeof(lpcspifi_flash_erase_code), lpcspifi_flash_erase_code);
if (retval != ERROR_OK) {
target_free_working_area(target, erase_algorithm);
return retval;
}
init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* Start address */
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* Sector count */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* Erase command */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* Sector size */
buf_set_u32(reg_params[0].value, 0, 32, bank->sectors[first].offset);
buf_set_u32(reg_params[1].value, 0, 32, last - first + 1);
buf_set_u32(reg_params[2].value, 0, 32, lpcspifi_info->dev->erase_cmd);
buf_set_u32(reg_params[3].value, 0, 32, bank->sectors[first].size);
/* Run the algorithm */
retval = target_run_algorithm(target, 0 , NULL, 4, reg_params,
erase_algorithm->address,
erase_algorithm->address + sizeof(lpcspifi_flash_erase_code) - 4,
3000*(last - first + 1), &armv7m_info);
if (retval != ERROR_OK)
LOG_ERROR("Error executing flash erase algorithm");
target_free_working_area(target, erase_algorithm);
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
retval = lpcspifi_set_hw_mode(bank);
return retval;
}
static int lpcspifi_probe(struct flash_bank *bank)
{
struct lpcspifi_flash_bank *lpcspifi_info = bank->driver_priv;
struct flash_sector *sectors;
uint32_t id = 0; /* silence uninitialized warning */
int retval;
/* If we've already probed, we should be fine to skip this time. */
if (lpcspifi_info->probed)
return ERROR_OK;
lpcspifi_info->probed = 0;
lpcspifi_info->ssp_base = 0x40083000;
lpcspifi_info->io_base = 0x400F4000;
lpcspifi_info->ioconfig_base = 0x40086000;
lpcspifi_info->bank_num = bank->bank_number;
/* read and decode flash ID; returns in SW mode */
retval = lpcspifi_read_flash_id(bank, &id);
if (retval != ERROR_OK)
return retval;
retval = lpcspifi_set_hw_mode(bank);
if (retval != ERROR_OK)
return retval;
lpcspifi_info->dev = NULL;
for (const struct flash_device *p = flash_devices; p->name ; p++)
if (p->device_id == id) {
lpcspifi_info->dev = p;
break;
}
if (!lpcspifi_info->dev) {
LOG_ERROR("Unknown flash device (ID 0x%08" PRIx32 ")", id);
return ERROR_FAIL;
}
LOG_INFO("Found flash device \'%s\' (ID 0x%08" PRIx32 ")",
lpcspifi_info->dev->name, lpcspifi_info->dev->device_id);
/* Set correct size value */
bank->size = lpcspifi_info->dev->size_in_bytes;
/* create and fill sectors array */
bank->num_sectors =
lpcspifi_info->dev->size_in_bytes / lpcspifi_info->dev->sectorsize;
sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
if (sectors == NULL) {
LOG_ERROR("not enough memory");
return ERROR_FAIL;
}
for (int sector = 0; sector < bank->num_sectors; sector++) {
sectors[sector].offset = sector * lpcspifi_info->dev->sectorsize;
sectors[sector].size = lpcspifi_info->dev->sectorsize;
sectors[sector].is_erased = -1;
sectors[sector].is_protected = 0;
}
bank->sectors = sectors;
lpcspifi_info->probed = 1;
return ERROR_OK;
}