C++ (Cpp) machine_is_apq8064_rumi3 Beispiele

Beispiel #1

Datei: board-8064-storage.c Projekt: ELWIN-MAO/huawei-g330d-u8825d-kernel

void __init apq8064_init_mmc(void)
{
	if ((machine_is_apq8064_rumi3()) || machine_is_apq8064_sim()) {
		if (apq8064_sdc1_pdata) {
			if (machine_is_apq8064_sim())
				apq8064_sdc1_pdata->disable_bam = true;
			apq8064_sdc1_pdata->disable_runtime_pm = true;
			apq8064_sdc1_pdata->disable_cmd23 = true;
		}
		if (apq8064_sdc3_pdata) {
			if (machine_is_apq8064_sim())
				apq8064_sdc3_pdata->disable_bam = true;
			apq8064_sdc3_pdata->disable_runtime_pm = true;
			apq8064_sdc3_pdata->disable_cmd23 = true;
		}
	}

	if (apq8064_sdc1_pdata)
		apq8064_add_sdcc(1, apq8064_sdc1_pdata);

	if (apq8064_sdc3_pdata) {
		if (!machine_is_apq8064_cdp()) {
			apq8064_sdc3_pdata->wpswitch_gpio = 0;
			apq8064_sdc3_pdata->wpswitch_polarity = 0;
		}
		if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
			machine_is_mpq8064_dtv()) {
			apq8064_sdc3_pdata->status_gpio =
				PM8921_GPIO_PM_TO_SYS(31);
			apq8064_sdc3_pdata->status_irq =
				PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 31);
		}
		apq8064_add_sdcc(3, apq8064_sdc3_pdata);
	}
}

Beispiel #2

Datei: board-apq8064.c Projekt: choco81/semc-es209ra

static void __init apq8064_init_mmc(void)
{
	if ((machine_is_apq8064_rumi3()) || machine_is_apq8064_sim()) {
		if (apq8064_sdc1_pdata) {
			apq8064_sdc1_pdata->disable_bam = true;
			apq8064_sdc1_pdata->disable_runtime_pm = true;
			apq8064_sdc1_pdata->disable_cmd23 = true;
		}
		if (apq8064_sdc3_pdata) {
			apq8064_sdc3_pdata->disable_bam = true;
			apq8064_sdc3_pdata->disable_runtime_pm = true;
			apq8064_sdc3_pdata->disable_cmd23 = true;
		}
	}
	apq8064_add_sdcc(1, apq8064_sdc1_pdata);
	apq8064_add_sdcc(3, apq8064_sdc3_pdata);
}

Beispiel #3

Datei: board-8064-storage.c Projekt: gcloudspider/android_kernel_asus_A68

void __init apq8064_init_mmc(void)
{
	if ((machine_is_apq8064_rumi3()) || machine_is_apq8064_sim()) {
		if (apq8064_sdc1_pdata) {
			if (machine_is_apq8064_sim())
				apq8064_sdc1_pdata->disable_bam = true;
			apq8064_sdc1_pdata->disable_runtime_pm = true;
			apq8064_sdc1_pdata->disable_cmd23 = true;
		}
		if (apq8064_sdc3_pdata) {
			if (machine_is_apq8064_sim())
				apq8064_sdc3_pdata->disable_bam = true;
			apq8064_sdc3_pdata->disable_runtime_pm = true;
			apq8064_sdc3_pdata->disable_cmd23 = true;
		}
	}

	if (apq8064_sdc1_pdata)
		apq8064_add_sdcc(1, apq8064_sdc1_pdata);

	if (apq8064_sdc2_pdata)
		apq8064_add_sdcc(2, apq8064_sdc2_pdata);

	if (apq8064_sdc3_pdata) {
		if (!machine_is_apq8064_cdp()) {
			apq8064_sdc3_pdata->wpswitch_gpio = 0;
			apq8064_sdc3_pdata->is_wpswitch_active_low = false;
		}
		if (machine_is_mpq8064_cdp() || machine_is_mpq8064_hrd() ||
			machine_is_mpq8064_dtv()) {
			int rc;
			struct pm_gpio sd_card_det_init_cfg = {
				.direction      = PM_GPIO_DIR_IN,
				.output_buffer  = PM_GPIO_OUT_BUF_CMOS,
				.pull           = PM_GPIO_PULL_UP_30,
				.vin_sel        = PM_GPIO_VIN_S4,
				.out_strength   = PM_GPIO_STRENGTH_NO,
				.function       = PM_GPIO_FUNC_NORMAL,
			};

			apq8064_sdc3_pdata->status_gpio =
				PM8921_GPIO_PM_TO_SYS(31);
			apq8064_sdc3_pdata->status_irq =
				PM8921_GPIO_IRQ(PM8921_IRQ_BASE, 31);
			rc = pm8xxx_gpio_config(apq8064_sdc3_pdata->status_gpio,
					&sd_card_det_init_cfg);
			if (rc) {
				pr_info("%s: SD_CARD_DET GPIO%d config "
					"failed(%d)\n", __func__,
					apq8064_sdc3_pdata->status_gpio, rc);
				apq8064_sdc3_pdata->status_gpio = 0;
				apq8064_sdc3_pdata->status_irq = 0;
			}
		}
		if (machine_is_apq8064_cdp()) {
			int i;

			for (i = 0;
			     i < apq8064_sdc3_pdata->pin_data->pad_data->\
				 drv->size;
			     i++)
				apq8064_sdc3_pdata->pin_data->pad_data->\
					drv->on[i].val = GPIO_CFG_10MA;
		}
		apq8064_add_sdcc(3, apq8064_sdc3_pdata);
	}