//! \brief Test 8 - Detach during reset after first setup request get descriptor
static void main_test8(void)
{
main_otg_init();
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
if (Is_udd_low_speed_enable()) {
delay_ms(25);
} else {
main_usb_wait_reset_start();
}
main_detach();
udd_ack_reset(); // Ack previous reset finish by detach
}
//! \brief Test 17 - Enumeration success (with configuration in BUS + 100mA -> must be pass)
static void main_test17(void)
{
udd_attach_device();
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_enum_step5();
main_usb_enum_step6();
main_usb_enum_step7();
main_usb_enum_step8();
main_usb_enum_step9();
main_usb_enum_step10();
main_usb_enum_step11();
main_usb_enum_step12();
main_usb_enum_step13();
main_usb_enum_step14();
}
//! \brief Test 2 - Disable endpoint 0 after first setup packet
static void main_test2(void)
{
uint8_t nb_fail;
udd_attach_device();
nb_fail = 4;
while (nb_fail--) {
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
main_usb_wait_setup_packet();
udd_disable_endpoint(0);
// Here Host try to send IN on control endpoint 0
}
main_usb_wait_suspend();
main_detach();
}
//! \brief Test 6 - Wrong value in first setup request get descriptor
static void main_test6(void)
{
uint8_t nb_fail;
udd_attach_device();
nb_fail = 4;
while (nb_fail--) {
main_usb_enum_step1();
main_usb_enum_step2();
main_usb_enum_step3();
main_usb_enum_step4();
// Get Device Descriptor
main_usb_wait_setup_packet();
main_device_desc.bDescriptorType = 0xFF;
main_device_desc.bMaxPacketSize0 = 0xFF;
main_usb_send_in((uint8_t*)&main_device_desc,8);
main_usb_wait_out(NULL,0);
}
main_usb_wait_suspend();
main_detach();
}
