void lr35902_cpu_device::execute_run()
{
do
{
if ( m_execution_state ) {
UINT8 x;
/* Execute instruction */
switch( m_op ) {
#include "opc_main.h"
}
} else {
/* Fetch and count cycles */
check_interrupts();
debugger_instruction_hook(this, m_PC);
if ( m_enable & HALTED ) {
cycles_passed( 4 );
m_execution_state = 1;
} else {
m_op = mem_read_byte( m_PC++ );
if ( m_doHALTbug ) {
m_PC--;
m_doHALTbug = 0;
}
}
}
m_execution_state ^= 1;
} while (m_icount > 0);
}
void lr35902_cpu_device::execute_run()
{
do
{
if ( m_execution_state ) {
UINT8 x;
/* Execute instruction */
switch( m_op ) {
#include "opc_main.inc"
default:
// actually this should lock up the cpu!
logerror("LR35902: Illegal opcode $%02X @ %04X\n", m_op, m_PC);
break;
}
} else {
/* Fetch and count cycles */
check_interrupts();
debugger_instruction_hook(this, m_PC);
if ( m_enable & HALTED ) {
cycles_passed( 4 );
m_execution_state = 1;
} else {
m_op = mem_read_byte( m_PC++ );
if ( m_handle_halt_bug ) {
m_PC--;
m_handle_halt_bug = false;
}
}
}
m_execution_state ^= 1;
} while (m_icount > 0);
}
void lr35902_cpu_device::execute_run()
{
do
{
if (m_dma_cycles_to_burn > 0)
{
if (m_dma_cycles_to_burn < 4)
{
cycles_passed(m_dma_cycles_to_burn);
m_dma_cycles_to_burn = 0;
}
else
{
cycles_passed(4);
m_dma_cycles_to_burn -= 4;
}
}
else
{
if ( m_execution_state ) {
uint8_t x;
/* Execute instruction */
switch( m_op ) {
#include "opc_main.hxx"
default:
// actually this should lock up the cpu!
logerror("LR35902: Illegal opcode $%02X @ %04X\n", m_op, m_PC);
break;
}
} else {
/* Fetch and count cycles */
bool was_halted = (m_enable & HALTED);
check_interrupts();
debugger_instruction_hook(m_PC);
if ( m_enable & HALTED ) {
cycles_passed(m_has_halt_bug ? 2 : 4);
m_execution_state = 1;
m_entering_halt = false;
} else {
if (was_halted) {
m_PC++;
} else {
m_op = mem_read_byte( m_PC++ );
}
}
}
m_execution_state ^= 1;
}
} while (m_icount > 0);
}
inline UINT16 lr35902_cpu_device::mem_read_word( UINT16 addr )
{
UINT16 data = mem_read_byte( addr );
data |= ( mem_read_byte( addr + 1 ) << 8 );
return data;
}
void lr35902_cpu_device::check_interrupts()
{
uint8_t irq = m_IE & m_IF;
/* Interrupts should be taken after the first instruction after an EI instruction */
if (m_handle_ei_delay) {
m_handle_ei_delay = false;
return;
}
/*
logerror("Attempting to process LR35902 Interrupt IRQ $%02X\n", irq);
logerror("Attempting to process LR35902 Interrupt IE $%02X\n", m_IE);
logerror("Attempting to process LR35902 Interrupt IF $%02X\n", m_IF);
*/
if (irq)
{
int irqline = 0;
/*
logerror("LR35902 Interrupt IRQ $%02X\n", irq);
*/
bool was_halted = (m_enable & HALTED);
for( ; irqline < 5; irqline++ )
{
if( irq & (1<<irqline) )
{
if (m_enable & HALTED)
{
m_enable &= ~HALTED;
m_PC++;
// In general there seems to be a 4 cycle delay to leave the halt state; except when the
// trigger is caused by the VBlank interrupt (on DMG/MGB/SGB?/SGB2?).
//
// On CGB/AGB/AGS this delay to leave the halt seems to always be 4 cycles.
//
if ( m_has_halt_bug ) {
if ( ! ( m_enable & IME ) ) {
/* Old cpu core (dmg/mgb/sgb) */
m_PC--;
}
// TODO: Properly detect when the delay should be skipped. Cases seen so far:
// - Vblank irq
// - STAT mode 1 irq (triggered at same time as vblank)
// - STAT mode 2 irq (8 cycles?, breaks gambatte halt/m2irq_ly tests when always applied but fix other gambatte halt/m2irq and halt/m2int cases)
// No delay:
// - LY=LYC irq
// STAT and not vblank just triggered (this on dmg/mgb/sgb only)? or Timer IRQ
//
// This is a bit hacky, more testing is needed to determine exact
// hardware behavior.
if ((irqline == 1 && !(m_IF & 0x01)) || irqline == 2)
{
// Cycles needed for leaving the halt state
cycles_passed(4);
if (irqline == 2)
{
cycles_passed(2);
}
}
} else {
/* New cpu core (cgb/agb/ags) */
// Leaving halt state seems to take 4 cycles.
cycles_passed(4);
if (!(m_enable & IME) && !m_entering_halt)
{
cycles_passed(4);
}
}
}
if ( m_enable & IME ) {
m_enable &= ~IME;
m_IF &= ~(1 << irqline);
cycles_passed( 12 );
m_SP -= 2;
mem_write_word( m_SP, m_PC );
m_PC = 0x40 + irqline * 8;
/*logerror("LR35902 Interrupt PC $%04X\n", m_PC );*/
if (was_halted) {
m_op = mem_read_byte( m_PC );
}
return;
}
}
}
}
}
inline uint16_t lr35902_cpu_device::mem_read_word( uint16_t addr )
{
uint16_t data = mem_read_byte( addr );
data |= ( mem_read_byte( addr + 1 ) << 8 );
return data;
}