/*
* Func: post_sysinfo_scan_mmu_setup
* Desc: Once we have scanned coreboot tables, we have complete information
* about different memory ranges. Thus, we can perform a complete mmu
* initialization. Also, this takes care of DMA area setup
*/
static void post_sysinfo_scan_mmu_setup(void)
{
struct memrange *ranges;
uint64_t nranges;
struct mmu_ranges mmu_ranges;
struct mmu_memrange *dma_range;
/* Get memrange info from lib_sysinfo */
lib_sysinfo_get_memranges(&ranges, &nranges);
/* Get memory ranges for mmu init from lib_sysinfo memrange */
dma_range = mmu_init_ranges_from_sysinfo(ranges, nranges, &mmu_ranges);
/* Disable mmu */
mmu_disable();
/* Init mmu */
mmu_init(&mmu_ranges);
/* Enable mmu */
mmu_enable();
/* Init dma memory */
init_dma_memory((void *)dma_range->base, dma_range->size);
}
/* CPUClass::reset() */
static void mb_cpu_reset(CPUState *s)
{
MicroBlazeCPU *cpu = MICROBLAZE_CPU(s);
MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(cpu);
CPUMBState *env = &cpu->env;
mcc->parent_reset(s);
memset(env, 0, offsetof(CPUMBState, end_reset_fields));
env->res_addr = RES_ADDR_NONE;
/* Disable stack protector. */
env->shr = ~0;
env->sregs[SR_PC] = cpu->cfg.base_vectors;
#if defined(CONFIG_USER_ONLY)
/* start in user mode with interrupts enabled. */
env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
#else
env->sregs[SR_MSR] = 0;
mmu_init(&env->mmu);
env->mmu.c_mmu = 3;
env->mmu.c_mmu_tlb_access = 3;
env->mmu.c_mmu_zones = 16;
#endif
}
void test_mmu(){
volatile unsigned int *memory;
DEBUG("MMU tests - writing data to memory\r\n");
memory = (unsigned int *)0x00100000;
*memory = 0xdeadbeef;
DEBUG("0x00100000 = 0x%x \r\n", *memory);
memory = (unsigned int *)0x00200000;
*memory = 0xf00dcafe;
DEBUG("0x00200000 = 0x%x \r\n", *memory);
/* Write to 32MB */
memory = (unsigned int *)0x02000000;
*memory = 0xc0ffee;
DEBUG("0x02000000 = 0x%x \r\n", *memory);
mmu_init();
DEBUG("MMU on - "
"0x00100000 and 0x00200000 swapped, 0x02000000 unmapped\r\n"
"Reading data from memory\r\n");
memory = (unsigned int *)0x00100000;
DEBUG("0x00100000 = 0x%x \r\n", *memory);
memory = (unsigned int *)0x00200000;
DEBUG("0x00200000 = 0x%x \r\n", *memory);
/* Write to 32MB */
memory = (unsigned int *)0x02000000;
DEBUG("0x02000000 = 0x%x \r\n", *memory);
}
void setup_mmu(enum dram_state dram)
{
dcache_mmu_disable();
/* start with mapping everything as strongly ordered. */
mmu_config_range(0, 4096, DCACHE_OFF);
/* Map Device memory. */
mmu_config_range_kb(RPM_START, RPM_SIZE, DCACHE_OFF);
mmu_config_range_kb(SRAM_START, SRAM_END - SRAM_START,
DCACHE_WRITEBACK);
/* Map DRAM memory */
setup_dram_mappings(dram);
mmu_disable_range(DRAM_END, 4096 - DRAM_END);
/* disable Page 0 for trapping NULL pointer references. */
mmu_disable_range_kb(0, 1);
mmu_init();
dcache_mmu_enable();
}
int
mmu_reset (ARMul_State * state)
{
if (state->mmu_inited)
mmu_exit (state);
return mmu_init (state);
}
void start_armboot(void)
{
ENTRY entry = (ENTRY)IMAGE_ENTRY;
unsigned char *pdst = (unsigned char *)IMAGE_ENTRY;
unsigned int image_data_len = input_data_end - input_data;
malloc_start = (char *)(_armboot_start - CONFIG_SYS_MALLOC_LEN);
uart_early_puts("\r\n\r\nCompressed-boot v1.0.0\r\n");
/* DDR should larger than 16M */
mmu_init((MEM_BASE_DDR + 0x4000), MEM_BASE_DDR, 0x1000000);
dcache_enable(0);
if (input_data[0] == 0x5D) {
uart_early_puts("Uncompress");
decompress(input_data, image_data_len, pdst);
uart_early_puts("Ok\r\n");
} else {
int *s = (int *)input_data;
int *d = (int *)pdst;
unsigned int len = ((image_data_len + 3) >> 2);
while (len--)
*d++ = *s++;
}
dcache_disable();
entry();
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = &mainboard_init;
/* set up dcache and MMU */
/* FIXME: this should happen via resource allocator */
exynos5250_config_l2_cache();
mmu_init();
mmu_config_range(0, DRAM_START, DCACHE_OFF);
mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK);
mmu_config_range(DMA_START >> 20, DMA_SIZE >> 20, DCACHE_OFF);
mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF);
dcache_invalidate_all();
dcache_mmu_enable();
/* this is going to move, but we must have it now and we're
* not sure where */
exception_init();
const unsigned epll_hz = 192000000;
const unsigned sample_rate = 48000;
const unsigned lr_frame_size = 256;
clock_epll_set_rate(epll_hz);
clock_select_i2s_clk_source();
clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size);
power_enable_xclkout();
}
/* CPUClass::reset() */
static void mb_cpu_reset(CPUState *s)
{
MicroBlazeCPU *cpu = MICROBLAZE_CPU(s);
MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(cpu);
CPUMBState *env = &cpu->env;
if (qemu_loglevel_mask(CPU_LOG_RESET)) {
qemu_log("CPU Reset (CPU %d)\n", s->cpu_index);
log_cpu_state(env, 0);
}
mcc->parent_reset(s);
memset(env, 0, offsetof(CPUMBState, breakpoints));
env->res_addr = RES_ADDR_NONE;
tlb_flush(env, 1);
/* Disable stack protector. */
env->shr = ~0;
env->pvr.regs[0] = PVR0_PVR_FULL_MASK \
| PVR0_USE_BARREL_MASK \
| PVR0_USE_DIV_MASK \
| PVR0_USE_HW_MUL_MASK \
| PVR0_USE_EXC_MASK \
| PVR0_USE_ICACHE_MASK \
| PVR0_USE_DCACHE_MASK \
| PVR0_USE_MMU \
| (0xb << 8);
env->pvr.regs[2] = PVR2_D_OPB_MASK \
| PVR2_D_LMB_MASK \
| PVR2_I_OPB_MASK \
| PVR2_I_LMB_MASK \
| PVR2_USE_MSR_INSTR \
| PVR2_USE_PCMP_INSTR \
| PVR2_USE_BARREL_MASK \
| PVR2_USE_DIV_MASK \
| PVR2_USE_HW_MUL_MASK \
| PVR2_USE_MUL64_MASK \
| PVR2_USE_FPU_MASK \
| PVR2_USE_FPU2_MASK \
| PVR2_FPU_EXC_MASK \
| 0;
env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family. */
env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
#if defined(CONFIG_USER_ONLY)
/* start in user mode with interrupts enabled. */
env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
env->pvr.regs[10] = 0x0c000000; /* Spartan 3a dsp. */
#else
env->sregs[SR_MSR] = 0;
mmu_init(&env->mmu);
env->mmu.c_mmu = 3;
env->mmu.c_mmu_tlb_access = 3;
env->mmu.c_mmu_zones = 16;
#endif
}
static void eukrea_cpuimx25_mmu_init(void)
{
mmu_init();
arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED);
arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED);
setup_dma_coherent(0x10000000);
mmu_enable();
}
static void enable_cache(void)
{
mmu_init();
/* Whole space is uncached. */
mmu_config_range(0, 4096, DCACHE_OFF);
/* SRAM is cached. MMU code will round size up to page size. */
mmu_config_range((uintptr_t)_sram/MiB, div_round_up(_sram_size, MiB),
DCACHE_WRITEBACK);
mmu_disable_range(0, 1);
dcache_mmu_enable();
}
void sdm845_mmu_init(void)
{
mmu_init();
mmu_config_range((void *)(4 * KiB), ((4UL * GiB) - (4 * KiB)), DEV_MEM);
mmu_config_range((void *)_ssram, REGION_SIZE(ssram), CACHED_RAM);
mmu_config_range((void *)_bsram, REGION_SIZE(bsram), CACHED_RAM);
mmu_config_range((void *)_dma_coherent, REGION_SIZE(dma_coherent),
UNCACHED_RAM);
mmu_enable();
}
static void nios2_cpu_initfn(Object *obj)
{
CPUState *cs = CPU(obj);
Nios2CPU *cpu = NIOS2_CPU(obj);
CPUNios2State *env = &cpu->env;
cs->env_ptr = env;
#if !defined(CONFIG_USER_ONLY)
mmu_init(env);
#endif
}
void init_clay(t_clay *clay, const char *rom_path)
{
clay->cpu.memRead = mmu_mem_read;
clay->cpu.memWrite = mmu_mem_write;
clay->cpu.ioRead = io_handler_read;
clay->cpu.ioWrite = io_handler_write;
mmu_init(&clay->mmu, rom_path);
z80ctc_init(&clay->ctc);
ay_3_8912_init(&clay->ay);
if (audio_output_init(&clay->audio_out, 44100*2, &clay->ay, (audio_output_sample_callback)ay_3_8912_sample_stereo)) // 2 sec sound buffer
fprintf(stderr, "An error occured while initializing the sound sampler.\n");
}
static void __attribute__((noinline)) romstage(void)
{
timestamp_init(0);
timestamp_add_now(TS_START_ROMSTAGE);
console_init();
exception_init();
sdram_init(get_sdram_config());
/* used for MMU and CBMEM setup, in MB */
u32 dram_start_mb = (uintptr_t)_dram/MiB;
u32 dram_end_mb = sdram_max_addressable_mb();
u32 dram_size_mb = dram_end_mb - dram_start_mb;
configure_l2_cache();
mmu_init();
/* Device memory below DRAM is uncached. */
mmu_config_range(0, dram_start_mb, DCACHE_OFF);
/* SRAM is cached. MMU code will round size up to page size. */
mmu_config_range((uintptr_t)_sram/MiB, div_round_up(_sram_size, MiB),
DCACHE_WRITEBACK);
/* DRAM is cached. */
mmu_config_range(dram_start_mb, dram_size_mb, DCACHE_WRITEBACK);
/* A window for DMA is uncached. */
mmu_config_range((uintptr_t)_dma_coherent/MiB,
_dma_coherent_size/MiB, DCACHE_OFF);
/* The space above DRAM is uncached. */
if (dram_end_mb < 4096)
mmu_config_range(dram_end_mb, 4096 - dram_end_mb, DCACHE_OFF);
mmu_disable_range(0, 1);
dcache_mmu_enable();
/*
* A watchdog reset only resets part of the system so it ends up in
* a funny state. If that happens, we need to reset the whole machine.
*/
if (power_reset_status() == POWER_RESET_WATCHDOG) {
printk(BIOS_INFO, "Watchdog reset detected, rebooting.\n");
hard_reset();
}
/* FIXME: this may require coordination with moving timestamps */
cbmem_initialize_empty();
early_mainboard_init();
run_ramstage();
}
void bootblock_soc_init(void)
{
rkclk_init();
mmu_init();
/* Start with a clean slate. */
mmu_config_range(0, 4096, DCACHE_OFF);
/* SRAM is tightly wedged between registers, need to use subtables. Map
* write-through as equivalent for non-cacheable without XN on A17. */
mmu_config_range_kb((uintptr_t)_sram/KiB,
_sram_size/KiB, DCACHE_WRITETHROUGH);
dcache_mmu_enable();
rkclk_configure_crypto(148500*KHz);
}
int gboot_main()
{
int num;
#ifdef MMU_ON
mmu_init();
#endif
led_init();
key_init();
int_irq();
uart_init();
led_on();
while(1)
{
printf("\n\r************************************\n\r");
printf("\n\r**********kindlyde******************\n\r");
printf("\n\r1:Downloads Linux Kernel from TFTP Servers\n\r");
printf("\n\r2:Boot Linux from Ram\n\r");
printf("\n\r3:Boot Linux from Nand Flash\n\r");
printf("\n\rplease Select\n\r");
scanf("%d", &num);
//putc('a');
switch (num)
{
case 1:
break;
case 2:
break;
case 3:
break;
default:
printf("\n\rError: please select agian\n\r");
break;
}
}
return 0;
}
int gboot_main()
{
int num;
#ifdef MMU_ON
mmu_init();
#endif
led_init();
button_init();
init_irq();
uart_init();
while(1)
{
printf("\n***************************************\n\r");
printf("\n*****************GBOOT*****************\n\r");
printf("1:Download Linux Kernel from TFTP Server!\n\r");
printf("2:Boot Linux from RAM!\n\r");
printf("3:Boor Linux from Nand Flash!\n\r");
printf("\n Plese Select:");
scanf("%d",&num);
switch (num)
{
case 1:
//tftp_load();
break;
case 2:
//boot_linux_ram();
break;
case 3:
//boot_linux_nand();
break;
default:
printf("Error: wrong selection!\n\r");
break;
}
}
return 0;
}
void tegra132_mmu_init(void)
{
uintptr_t tz_base_mib;
size_t tz_size_mib;
size_t ttb_size_mib;
struct memranges *map = &t132_mmap_ranges;
tegra132_memrange_init(map);
mainboard_add_memory_ranges(map);
/* Place page tables at the base of the trust zone region. */
carveout_range(CARVEOUT_TZ, &tz_base_mib, &tz_size_mib);
tz_base_mib *= MiB;
ttb_size_mib = TTB_SIZE * MiB;
mmu_init(map, (void *)tz_base_mib, ttb_size_mib);
mmu_enable();
}
mmu_t *mmu_create(int nthreads, int hazards_per_thread, int plist_size)
{
mmu_t *new_mmu = NULL;
new_mmu = malloc(sizeof(*new_mmu));
if (new_mmu == NULL)
return NULL;
if (mmu_init(new_mmu, nthreads, hazards_per_thread, plist_size) < 0) {
free(new_mmu);
return NULL;
}
new_mmu->__dynamic = 1;
return new_mmu;
}
static void eukrea_cpuimx27_mmu_init(void)
{
mmu_init();
arm_create_section(0xa0000000, 0xa0000000, 128, PMD_SECT_DEF_CACHED);
arm_create_section(0xb0000000, 0xa0000000, 128, PMD_SECT_DEF_UNCACHED);
setup_dma_coherent(0x10000000);
#if TEXT_BASE & (0x100000 - 1)
#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary
#else
arm_create_section(0x0, TEXT_BASE, 1, PMD_SECT_DEF_UNCACHED);
#endif
mmu_enable();
}
void mt8173_mmu_init(void)
{
mmu_init();
/* Set 0x0 to the end of 2GB dram address as device memory */
mmu_config_range((void *)0, (uintptr_t)_dram + 2U * GiB, DEV_MEM);
/* SRAM is cached */
mmu_config_range(_sram_l2c, _sram_l2c_size + _sram_size, CACHED_MEM);
/* DMA is non-cached and is reserved for TPM & da9212 I2C DMA */
mmu_config_range(_dma_coherent, _dma_coherent_size, UNCACHED_MEM);
/* set ttb as secure */
mmu_config_range(_ttb, _ttb_size, SECURE_MEM);
mmu_enable();
}
void bootblock_soc_init(void)
{
if (get_wakeup_state() == WAKEUP_DIRECT) {
wakeup();
/* Never returns. */
}
/* set up dcache and MMU */
mmu_init();
mmu_disable_range(0, SRAM_START);
mmu_config_range(SRAM_START, SRAM_SIZE, DCACHE_WRITEBACK);
mmu_config_range(SRAM_END, 4096 - SRAM_END, DCACHE_OFF);
dcache_mmu_enable();
/* For most ARM systems, we have to initialize firmware media source
* (ex, SPI, SD/MMC, or eMMC) now; but for Exynos platform, that is
* already handled by iROM so there's no need to setup again.
*/
}
/*
* All AE210P hardware initialization
*/
void hardware_init(void)
{
mmu_init(); /* mmu/cache */
plf_init(); /* Perform any platform specific initializations */
#if (defined(CONFIG_CPU_ICACHE_ENABLE) || defined(CONFIG_CPU_DCACHE_ENABLE))
unsigned int reg;
/* Invalid ICache */
nds32_icache_flush();
/* Invalid DCache */
nds32_dcache_invalidate();
/* Enable I/Dcache */
reg = (__nds32__mfsr(NDS32_SR_CACHE_CTL) & ~CACHE_CTL_MSK) | CACHE_CTL_CACHE_ON;
__nds32__mtsr(reg, NDS32_SR_CACHE_CTL);
#endif
}
//-------------------------------------------------------------------------
// MAIN
//-------------------------------------------------------------------------
int main(void)
{
oscc_init(); // Oscillator
PSSR = (PSSR_RDH | PSSR_PH); // Reenable the GPIO buffers (needed out of reset)
//SOS_SET_PIN_DIRECTIONS(); // GPIO
DVFS_SwitchCoreFreq(104, 104); // Switch to 104MHz mode
//DVFS_SwitchCoreFreq(13, 13); // Switch to 13MHz mode
memory_init(); // SDRAM
mmu_init(); // MMU
//gpio_init(); // GPIO Interrupts
//wdt_init(); // WATCHDOG
PXA27XGPIOInt_init();
pmic_init();
led_init(); // LEDS
//systime_init(); // LOCAL TIME
timer_hardware_init(
DEFAULT_INTERVAL, DEFAULT_SCALE); // SYSTEM TIMER
sos_main(SOS_BOOT_NORMAL);
return 0;
}
static int eukrea_cpuimx35_mmu_init(void)
{
mmu_init();
arm_create_section(0x80000000, 0x80000000, 128, PMD_SECT_DEF_CACHED);
arm_create_section(0x90000000, 0x80000000, 128, PMD_SECT_DEF_UNCACHED);
setup_dma_coherent(0x10000000);
#if TEXT_BASE & (0x100000 - 1)
#warning cannot create vector section. Adjust TEXT_BASE to a 1M boundary
#else
arm_create_section(0x0, TEXT_BASE, 1, PMD_SECT_DEF_UNCACHED);
#endif
mmu_enable();
#ifdef CONFIG_CACHE_L2X0
l2x0_init((void __iomem *)0x30000000, 0x00030024, 0x00000000);
#endif
return 0;
}
ARM_Interpreter::ARM_Interpreter() {
m_state = new ARMul_State;
ARMul_EmulateInit();
ARMul_NewState(m_state);
m_state->abort_model = 0;
m_state->cpu = (cpu_config_t*)&s_arm11_cpu_info;
m_state->bigendSig = LOW;
ARMul_SelectProcessor(m_state, ARM_v6_Prop | ARM_v5_Prop | ARM_v5e_Prop);
m_state->lateabtSig = LOW;
mmu_init(m_state);
// Reset the core to initial state
ARMul_Reset(m_state);
m_state->NextInstr = 0;
m_state->Emulate = 3;
m_state->pc = m_state->Reg[15] = 0x00000000;
m_state->Reg[13] = 0x10000000; // Set stack pointer to the top of the stack
}
/*
* Machine-dependent startup code
*/
void
machine_startup(void)
{
void *vector_offset = 0;
/*
* Reserve system pages.
*/
page_reserve(kvtop(SYSPAGE), SYSPAGESZ);
/*
* Copy exception vectors.
*/
memcpy(vector_offset, &exception_vector, 0x3000);
#ifdef CONFIG_MMU
/*
* Initialize MMU
*/
mmu_init(mmumap_table);
#endif
}
static void mainboard_enable(device_t dev)
{
dev->ops->init = &mainboard_init;
/* set up dcache and MMU */
/* FIXME: this should happen via resource allocator */
exynos5250_config_l2_cache();
mmu_init();
mmu_config_range(0, DRAM_START, DCACHE_OFF);
mmu_config_range(DRAM_START, DRAM_SIZE, DCACHE_WRITEBACK);
mmu_config_range((uintptr_t)_dma_coherent/MiB,
_dma_coherent_size/MiB, DCACHE_OFF);
mmu_config_range(DRAM_END, 4096 - DRAM_END, DCACHE_OFF);
dcache_mmu_enable();
const unsigned epll_hz = 192000000;
const unsigned sample_rate = 48000;
const unsigned lr_frame_size = 256;
clock_epll_set_rate(epll_hz);
clock_select_i2s_clk_source();
clock_set_i2s_clk_prescaler(epll_hz, sample_rate * lr_frame_size);
power_enable_xclkout();
}
void
pi_start(void)
{
#warning IMPLEMENT _start
stage2_args args;
clear_bss();
call_ctors();
cpu_init();
gpio_init();
// Flick on "OK" led
GPIO_CLR(16);
mmu_init();
serial_init();
console_init();
args.heap_size = HEAP_SIZE;
args.arguments = NULL;
main(&args);
}
extern "C" int
start_gen(int argc, const char **argv, struct image_header *uimage, void *fdt)
{
stage2_args args;
clear_bss();
// call C++ constructors before doing anything else
call_ctors();
args.heap_size = HEAP_SIZE;
args.arguments = NULL;
args.arguments_count = 0;
args.platform.boot_tgz_data = NULL;
args.platform.boot_tgz_size = 0;
args.platform.fdt_data = NULL;
args.platform.fdt_size = 0;
gUImage = uimage;
gFDT = fdt; //XXX: make a copy?
// TODO: check for atags instead and convert them
if (argv) {
// skip the kernel name
++argv;
--argc;
}
// TODO: Ensure cmdline is mapped into memory by MMU before usage.
// if we get passed a uimage, try to find the third blob
// only if we do not have FDT data yet
if (gUImage != NULL
&& !gFDT
&& image_multi_getimg(gUImage, 2,
(uint32*)&args.platform.fdt_data,
&args.platform.fdt_size)) {
// found a blob, assume it is FDT data, when working on a platform
// which does not have an FDT enabled U-Boot
gFDT = args.platform.fdt_data;
}
// We have to cpu_init *before* calling FDT functions
cpu_init();
serial_init(gFDT);
#if defined(__ARM__)
arch_mailbox_init();
#endif
// initialize the OpenFirmware wrapper
of_init(NULL);
console_init();
// if we get passed an FDT, check /chosen for initrd and bootargs
if (gFDT != NULL) {
int node = fdt_path_offset(gFDT, "/chosen");
const void *prop;
int len;
phys_addr_t initrd_start = 0, initrd_end = 0;
if (node >= 0) {
prop = fdt_getprop(gFDT, node, "linux,initrd-start", &len);
if (prop && len == 4)
initrd_start = fdt32_to_cpu(*(uint32_t *)prop);
prop = fdt_getprop(gFDT, node, "linux,initrd-end", &len);
if (prop && len == 4)
initrd_end = fdt32_to_cpu(*(uint32_t *)prop);
if (initrd_end > initrd_start) {
args.platform.boot_tgz_data = (void *)initrd_start;
args.platform.boot_tgz_size = initrd_end - initrd_start;
dprintf("Found boot tgz from FDT @ %p, %" B_PRIu32 " bytes\n",
args.platform.boot_tgz_data, args.platform.boot_tgz_size);
}
// we check for bootargs after remapping the FDT
}
}
// if we get passed a uimage, try to find the second blob
if (gUImage != NULL
&& image_multi_getimg(gUImage, 1,
(uint32*)&args.platform.boot_tgz_data,
&args.platform.boot_tgz_size)) {
dprintf("Found boot tgz from uimage @ %p, %" B_PRIu32 " bytes\n",
args.platform.boot_tgz_data, args.platform.boot_tgz_size);
}
{ //DEBUG:
int i;
dprintf("argc = %d\n", argc);
for (i = 0; i < argc; i++)
dprintf("argv[%d] @%lx = '%s'\n", i, (uint32)argv[i], argv[i]);
dprintf("os: %d\n", (int)gUBootOS);
dprintf("gd @ %p\n", gUBootGlobalData);
if (gUBootGlobalData) {
dprintf("gd->bd @ %p\n", gUBootGlobalData->bd);
dprintf("gd->fb_base @ %p\n", (void*)gUBootGlobalData->fb_base);
}
if (gUImage)
dump_uimage(gUImage);
if (gFDT)
dump_fdt(gFDT);
}
if (args.platform.boot_tgz_size > 0) {
insert_physical_allocated_range((addr_t)args.platform.boot_tgz_data,
args.platform.boot_tgz_size);
}
// save the size of the FDT so we can map it easily after mmu_init
size_t fdtSize = gFDT ? fdt_totalsize(gFDT) : 0;
dprintf("fdtSize: 0x%" B_PRIxSIZE "\n", fdtSize);
mmu_init();
// Handle our tarFS post-mmu
if (args.platform.boot_tgz_size > 0) {
args.platform.boot_tgz_data = (void*)mmu_map_physical_memory((addr_t)
args.platform.boot_tgz_data, args.platform.boot_tgz_size,
kDefaultPageFlags);
}
// .. and our FDT
if (gFDT != NULL)
gFDT = (void*)mmu_map_physical_memory((addr_t)gFDT, fdtSize, kDefaultPageFlags);
// if we get passed an FDT, check /chosen for bootargs now
// to avoid having to copy them.
if (gFDT != NULL) {
int node = fdt_path_offset(gFDT, "/chosen");
const void *prop;
int len;
if (node >= 0) {
prop = fdt_getprop(gFDT, node, "bootargs", &len);
if (prop) {
dprintf("Found bootargs: %s\n", (const char *)prop);
static const char *sArgs[] = { NULL, NULL };
sArgs[0] = (const char *)prop;
// override main() args
args.arguments = sArgs;
args.arguments_count = 1;
}
}
dprintf("args.arguments_count = %" B_PRId32 "\n", args.arguments_count);
for (int i = 0; i < args.arguments_count; i++)
dprintf("args.arguments[%d] @%lx = '%s'\n", i,
(uint32)args.arguments[i], args.arguments[i]);
}
// wait a bit to give the user the opportunity to press a key
// spin(750000);
// reading the keyboard doesn't seem to work in graphics mode
// (maybe a bochs problem)
// sBootOptions = check_for_boot_keys();
//if (sBootOptions & BOOT_OPTION_DEBUG_OUTPUT)
serial_enable();
main(&args);
return 0;
}
