static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
msm_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
msm7x27a_otg_gadget();
msm7x27a_cfg_smsc911x();
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
register_i2c_devices();
msm7627a_bt_power_init();
msm7627a_camera_init();
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
msm_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
msm7x27a_otg_gadget();
/* LGE_CHANGE_: 2012/11/2 [email protected] U0 Flash Porting */
#ifndef CONFIG_MACH_LGE
msm7x27a_cfg_smsc911x();
#endif
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
lge_add_sound_devices();
#endif
/* LGE_CHANGE_S: 2012/11/2 [email protected] U0 Flash Porting */
msm7627a_camera_init();
/* LGE_CHANGE_E: 2012/11/2 [email protected] U0 Flash Porting */
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
lge_add_boot_mode_devices();
#endif
/* 2012-10-25 [email protected] Boot Mode Check [END] */
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
lge_add_panic_handler_devices();
#endif
lge_add_pm_devices();
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
/* [LGE_BSP_S] [email protected], 20130212 - RT8966A miniABB regulator */
#ifdef CONFIG_MINIABB_REGULATOR
init_miniabb_regulators();
#endif /* CONFIG_MINIABB_REGULATOR */
/* [LGE_BSP_E] [email protected], 20130212 - RT8966A miniABB regulator */
msm_adsp_add_pdev();
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
msm7x27a_otg_gadget();
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO //ew0804.kim
lge_add_sound_devices();
#endif
msm7627a_camera_init();
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
lge_add_gpio_i2c_devices();
/* 2012-10-25 [email protected] Boot Mode Check [START] */
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
lge_add_panic_handler_devices();
#endif
// LGE_CHANGE_S, [email protected],Add pm device
lge_add_pm_devices();
// LGE_CHANGE_E, [email protected],Add pm device
}
static void __init msm_qrd_init(void)
{
msm7x2x_misc_init();
msm7627a_init_regulators();
msmqrd_adsp_add_pdev();
if (cpu_is_msm8625() || cpu_is_msm8625q())
msm8625_device_i2c_init();
else
msm7627a_device_i2c_init();
/* uart1dm*/
qrd7627a_uart1dm_config();
/*OTG gadget*/
qrd7627a_otg_gadget();
msm_add_footswitch_devices();
add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm_qrd_init_ar6000pm();
#endif
msm7627a_init_mmc();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7627a_init_host();
#endif
msm_pm_init();
msm_pm_register_irqs();
msm_fb_add_devices();
if (machine_is_msm8625q_evbd() || machine_is_msm8625q_skud()
|| machine_is_msm8625q_skue())
i2c_register_board_info(2, i2c2_info,
ARRAY_SIZE(i2c2_info));
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
msm7627a_sensor_init();
msm7627a_camera_init();
qrd7627a_add_io_devices();
msm7x25a_kgsl_3d0_init();
msm8x25_kgsl_3d0_init();
}
static void __init msm_qrd1_init(void)
{
msm7x2x_misc_init();
msm7627a_init_regulators();
msm_device_i2c_init();
#ifdef CONFIG_SERIAL_MSM_HS
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency = msm7627a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
msm_device_gadget_peripheral.dev.platform_data =
&msm_gadget_pdata;
platform_add_devices(qrd1_devices,
ARRAY_SIZE(qrd1_devices));
msm7627a_init_mmc();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7627a_init_host();
#endif
msm_pm_set_platform_data(msm7627a_pm_data,
ARRAY_SIZE(msm7627a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
msm_fb_add_devices();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
msm7627a_camera_init();
#if defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C) || \
defined(CONFIG_TOUCHSCREEN_SYNAPTICS_RMI4_I2C_MODULE)
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
synaptic_i2c_clearpad3k,
ARRAY_SIZE(synaptic_i2c_clearpad3k));
#endif
platform_device_register(&hs_pdev);
#ifdef CONFIG_MSM_RPC_VIBRATOR
msm_init_pmic_vibrator();
#endif
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
msm7x27a_init_regulators();
#ifdef CONFIG_MINIABB_REGULATOR
init_miniabb_regulators();
#endif
msm_adsp_add_pdev();
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
msm7x27a_otg_gadget();
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
#ifdef CONFIG_MSM7X27A_AUDIO
lge_add_sound_devices();
#endif
msm7627a_camera_init();
msm7627a_add_io_devices();
msm7x25a_kgsl_3d0_init();
msm8x25_kgsl_3d0_init();
lge_add_gpio_i2c_devices();
#ifdef CONFIG_LGE_POWER_ON_STATUS_PATCH
lge_board_pwr_on_status();
#endif
#ifdef CONFIG_LGE_BOOT_MODE
lge_add_boot_mode_devices();
#endif
#if defined(CONFIG_ANDROID_RAM_CONSOLE) && defined(CONFIG_LGE_HANDLE_PANIC)
lge_add_panic_handler_devices();
#endif
lge_add_pm_devices();
}
static void __init msm_qrd_init(void)
{
msm7x2x_misc_init();
msm7627a_init_regulators();
msmqrd_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7627a_device_i2c_init();
/* uart1dm*/
qrd7627a_uart1dm_config();
/*OTG gadget*/
qrd7627a_otg_gadget();
msm_add_footswitch_devices();
add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm_qrd_init_ar6000pm();
msm7627a_init_mmc();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7627a_init_host();
#endif
msm_pm_init();
msm_pm_register_irqs();
msm_fb_add_devices();
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
/* qcomm QRD phone concerned not need by hw product*/
//msm7627a_bt_power_init();
#endif
msm7627a_camera_init();
qrd7627a_add_io_devices();
msm7x25a_kgsl_3d0_init();
msm8x25_kgsl_3d0_init();
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
/* Common functions for SURF/FFA/RUMI3 */
msm_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_cfg_uart2dm_serial();
#ifdef CONFIG_SERIAL_MSM_HS
msm_uart_dm1_pdata.wakeup_irq = gpio_to_irq(UART1DM_RX_GPIO);
msm_device_uart_dm1.dev.platform_data = &msm_uart_dm1_pdata;
#endif
#ifdef CONFIG_USB_MSM_OTG_72K
msm_otg_pdata.swfi_latency =
msm7x27a_pm_data
[MSM_PM_SLEEP_MODE_RAMP_DOWN_AND_WAIT_FOR_INTERRUPT].latency;
msm_device_otg.dev.platform_data = &msm_otg_pdata;
#endif
msm_device_gadget_peripheral.dev.platform_data =
&msm_gadget_pdata;
msm7x27a_cfg_smsc911x();
platform_add_devices(msm_footswitch_devices,
msm_num_footswitch_devices);
platform_add_devices(surf_ffa_devices,
ARRAY_SIZE(surf_ffa_devices));
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
#ifdef CONFIG_MMC_MSM
msm7627a_init_mmc();
#endif
msm_fb_add_devices();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7x2x_init_host();
#endif
msm_pm_set_platform_data(msm7x27a_pm_data,
ARRAY_SIZE(msm7x27a_pm_data));
BUG_ON(msm_pm_boot_init(&msm_pm_boot_pdata));
#if defined(CONFIG_I2C) && defined(CONFIG_GPIO_SX150X)
register_i2c_devices();
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
if (machine_is_msm7625a_surf() || machine_is_msm7625a_ffa()) {
atmel_ts_pdata.min_x = 0;
atmel_ts_pdata.max_x = 480;
atmel_ts_pdata.min_y = 0;
atmel_ts_pdata.max_y = 320;
}
i2c_register_board_info(MSM_GSBI1_QUP_I2C_BUS_ID,
atmel_ts_i2c_info,
ARRAY_SIZE(atmel_ts_i2c_info));
#if defined(CONFIG_MSM_CAMERA)
msm7627a_camera_init();
#endif
platform_device_register(&kp_pdev);
platform_device_register(&hs_pdev);
/* configure it as a pdm function*/
if (gpio_tlmm_config(GPIO_CFG(LED_GPIO_PDM, 3,
GPIO_CFG_OUTPUT, GPIO_CFG_NO_PULL,
GPIO_CFG_8MA), GPIO_CFG_ENABLE))
pr_err("%s: gpio_tlmm_config for %d failed\n",
__func__, LED_GPIO_PDM);
else
platform_device_register(&led_pdev);
#ifdef CONFIG_MSM_RPC_VIBRATOR
if (machine_is_msm7x27a_ffa() || machine_is_msm7625a_ffa())
msm_init_pmic_vibrator();
#endif
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
}
static void __init msm_qrd_init(void)
{
msm7x2x_misc_init();
msm7627a_init_regulators();
msmqrd_adsp_add_pdev();
if (cpu_is_msm8625() || cpu_is_msm8625q())
msm8625_device_i2c_init();
else
msm7627a_device_i2c_init();
/* uart1dm*/
qrd7627a_uart1dm_config();
/*OTG gadget*/
qrd7627a_otg_gadget();
msm_add_footswitch_devices();
add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
/* modified by fanjiankang begin*/
//msm_qrd_init_ar6000pm();
wlan_init_power();
msm_read_nv(NV_ITEM_WLAN_MAC_ADDR, wlan_mac_addr);
msm7627a_init_mmc();
#ifdef CONFIG_USB_EHCI_MSM_72K
msm7627a_init_host();
#endif
msm_pm_init();
msm_pm_register_irqs();
msm_fb_add_devices();
// zhangji modify for del mp8845c
// platform_device_register(&mp8845c_platform_device);
platform_device_register(&ncp6335d_platform_device);
#ifdef CONFIG_I2C_GPIO
//if (machine_is_msm8625q_evbd() || machine_is_msm8625q_skud()
// || machine_is_msm8625q_skue())
// i2c_register_board_info(2, i2c2_info, ARRAY_SIZE(i2c2_info));
#endif
#if defined(CONFIG_BT) && defined(CONFIG_MARIMBA_CORE)
msm7627a_bt_power_init();
#endif
//msm7627a_sensor_init();
msm7627a_camera_init();
qrd7627a_add_io_devices();
msm7x25a_kgsl_3d0_init();
msm8x25_kgsl_3d0_init();
msm7x27a_sensor_init();
#ifdef CONFIG_PN544_NFC
nfc_init();
#endif
}
static void __init msm7x2x_init(void)
{
msm7x2x_misc_init();
/* Initialize regulators first so that other devices can use them */
msm7x27a_init_regulators();
msm_adsp_add_pdev();
if (cpu_is_msm8625())
msm8625_device_i2c_init();
else
msm7x27a_device_i2c_init();
msm7x27a_init_ebi2();
msm7x27a_uartdm_config();
#ifdef CONFIG_HUAWEI_KERNEL
import_kernel_cmdline();
#endif
msm7x27a_otg_gadget();
#ifndef CONFIG_HUAWEI_CAMERA
msm7x27a_cfg_smsc911x();
#endif
#if (defined(CONFIG_HUAWEI_BT_BCM43XX) && defined(CONFIG_HUAWEI_KERNEL))
/*before bt probe, config the bt_wake_msm gpio*/
bt_wake_msm_config();
#endif
msm7x27a_add_footswitch_devices();
msm7x27a_add_platform_devices();
/* Ensure ar6000pm device is registered before MMC/SDC */
msm7x27a_init_ar6000pm();
msm7627a_init_mmc();
msm_fb_add_devices();
msm7x2x_init_host();
msm7x27a_pm_init();
register_i2c_devices();
//#if (defined(HUAWEI_BT_BLUEZ_VER30) || (!defined(CONFIG_HUAWEI_KERNEL)))
//msm7627a_bt_power_init() will check QC or BCM bt chip powers inner.
msm7627a_bt_power_init();
//#endif
msm7627a_camera_init();
msm7627a_add_io_devices();
/*7x25a kgsl initializations*/
msm7x25a_kgsl_3d0_init();
#ifdef CONFIG_HUAWEI_FEATURE_OEMINFO
rmt_oeminfo_add_device();
#endif
#ifdef CONFIG_HUAWEI_KERNEL
virtualkeys_init();
#endif
#ifdef CONFIG_HUAWEI_KERNEL
hw_extern_sdcard_add_device();
#endif
/*8x25 kgsl initializations*/
msm8x25_kgsl_3d0_init();
#ifdef CONFIG_HUAWEI_MTK6252_MODEM
{
unsigned smem_size;
boot_reason = *(unsigned int *)
(smem_get_entry(SMEM_POWER_ON_STATUS_INFO, &smem_size));
printk(KERN_NOTICE "Boot Reason = 0x%02x\n", boot_reason);
mtk6252_dev_init();
}
#endif
}
