C++ (Cpp) msm_gpiomux_sdc3_install Beispiele

Beispiel #1

0

Datei anzeigen

Datei: board-8974-moto-gpiomux.c Projekt: Klozz/render_kernel_motorola_msm8226

void __init msm_8974_moto_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));

	msm_gpiomux_install(msm_blsp12_fps_spi_configs,
			    ARRAY_SIZE(msm_blsp12_fps_spi_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_sdc3_install();
	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(stm401_configs, ARRAY_SIZE(stm401_configs));

	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install(c55_i2s_configs, ARRAY_SIZE(c55_i2s_configs));

	msm_gpiomux_install(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	msm_gpiomux_install(&vib_en_gpio, 1);

	msm_gpiomux_install(c55_configs, ARRAY_SIZE(c55_configs));
	msm_gpiomux_install(cycapsence_issp_gpio_configs,
			ARRAY_SIZE(cycapsence_issp_gpio_configs));
	msm_gpiomux_install(wm5110_spi_configs,
			ARRAY_SIZE(wm5110_spi_configs));
}

Beispiel #2

0

Datei anzeigen

Datei: board-glu-gpiomux.c Projekt: Arc-Team/android_kernel_htc_a11

void __init glu_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_info("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
	socinfo_get_version());

	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0x5);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));

	msm_gpiomux_install(msm_blsp_rawchip_spi_configs, ARRAY_SIZE(msm_blsp_rawchip_spi_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&nfc_irq_config, 1);

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();
	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	msm_gpiomux_install(msm_mhl_configs, ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
			ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	msm_gpiomux_install_nowrite(msm_display_configs, ARRAY_SIZE(msm_display_configs));
	msm_gpiomux_install(msm_aud_configs, ARRAY_SIZE(msm_aud_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));
}

Beispiel #3

0

Datei anzeigen

Datei: board-mem-gpiomux.c Projekt: cpflayan/htc_kernel_a3

void __init msm8226_htc_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	msm_gpiomux_install(msm_slimbus_config,
			ARRAY_SIZE(msm_slimbus_config));
	msm_gpiomux_install(msm_aud_configs,
			ARRAY_SIZE(msm_aud_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_sdc3_install();

#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119;
		msm_hsic_configs[1].gpio = 120;
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}

Beispiel #4

0

Datei anzeigen

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_blsp_configs,
			ARRAY_SIZE(msm_qrd_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_goodix_configs,
				ARRAY_SIZE(msm_qrd_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_nfc_configs,
				ARRAY_SIZE(msm_qrd_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_sdc3_install();
}

Beispiel #5

0

Datei anzeigen

Datei: board-8974-gpiomux.c Projekt: StanTRC/lge-kernel-e400

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();
	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (machine_is_msm8974_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

	if (machine_is_msm8974_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
}

Beispiel #6

0

Datei anzeigen

Datei: board-8026-bass-gpiomux.c Projekt: Skin1980/bass-MM

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	if (lge_uart_console_enabled())
		msm_gpiomux_install(msm_console_uart_configs,
				ARRAY_SIZE(msm_console_uart_configs));
	else
		msm_gpiomux_install(msm_console_uart_disabled_configs,
				ARRAY_SIZE(msm_console_uart_disabled_configs));

	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(msm_touch_configs,
			ARRAY_SIZE(msm_touch_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_lcd_te_configs,
			ARRAY_SIZE(msm_lcd_te_configs));

	msm_gpiomux_sdc3_install();

	msm_gpiomux_install(msm_fuel_gauge_configs,
			ARRAY_SIZE(msm_fuel_gauge_configs));

#if defined(CONFIG_MSM_PWM_VIBRATOR)
	msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
	msm_gpiomux_install(vibrator_pwm_config,
			ARRAY_SIZE(vibrator_pwm_config));

#endif
	bluetooth_msm_gpiomux_install();
}

Beispiel #7

0

Datei anzeigen

Datei: board-8226-gpiomux.c Projekt: SamsungMSM8226/android_kernel_samsung_ms013g-jb

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_MS01_CHN_CTC) \
    || defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
	msm_gpiomux_install(msm_hall_configs,
			ARRAY_SIZE(msm_hall_configs));
#endif

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_blsp_configs,
			ARRAY_SIZE(msm_qrd_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);

#if defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ) || defined(CONFIG_MACH_MS01_LTE) || defined(CONFIG_MACH_MS01_CHN_CTC) \
    || defined(CONFIG_MACH_MS01_LTE_KOR) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
		msm_gpiomux_install(msm8226_tx_gtr_configs,
					ARRAY_SIZE(msm8226_tx_gtr_configs));
		msm_gpiomux_install(muic_i2c_configs,
					ARRAY_SIZE(muic_i2c_configs));
#endif

	if (of_board_is_qrd())
		msm_gpiomux_install(msm_qrd_goodix_configs,
				ARRAY_SIZE(msm_qrd_goodix_configs));

	else
#if defined(CONFIG_TOUCHSCREEN_ZINITIX_BT531)
		msm_gpiomux_install(msm_zinitixs_configs,
			ARRAY_SIZE(msm_zinitixs_configs));
#elif defined(CONFIG_TOUCHSCREEN_ATMEL_MXTS)
		msm_gpiomux_install(msm_atmel_configs,
			ARRAY_SIZE(msm_atmel_configs));
#elif defined(CONFIG_TOUCHSCREEN_MMS144)
		msm_gpiomux_install(msm_melfas_configs,
			ARRAY_SIZE(msm_melfas_configs));
#else
		msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

#if defined(CONFIG_FB_MSM_MDSS_SHARP_HD_PANEL)\
	|| defined(CONFIG_MACH_MILLET3G_EUR)
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
#endif
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
/*
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));
*/
#if defined(CONFIG_MACH_MILLET3G_EUR)
	msm_gpiomux_install(msm_speaker_enable_gpio_configs, ARRAY_SIZE(msm_speaker_enable_gpio_configs));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

#else
	msm_gpiomux_install(msm_nc_configs,
	ARRAY_SIZE(msm_nc_configs));
#endif

#if defined(CONFIG_YAS_ACC_DRIVER_BMA250) || defined(CONFIG_INPUT_MPU6500) || \
defined(CONFIG_PROXIMITY_SENSOR) || defined (CONFIG_SENSORS_HSCDTD008A)
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));
#endif

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_sdc3_install();
	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_LEDS_AN30259A)
	msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
#endif

#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)||defined(CONFIG_MACH_MS01_EUR_3G) || defined(CONFIG_MACH_CRATERQ)
	msm_gpiomux_install(msm8226_nc_gpio_cfgs, ARRAY_SIZE(msm8226_nc_gpio_cfgs));
#endif

#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#if defined(CONFIG_MACH_MS01_EUR_3G)
	msm_gpiomux_install(ms01_nc_gpio_cfgs, ARRAY_SIZE(ms01_nc_gpio_cfgs));
#endif
#if defined(CONFIG_MACH_MS01_CHN_CTC) || defined(CONFIG_MACH_CRATERVE_CHN_CTC)
	if ( system_rev >= 4 ) {
		msm_gpiomux_install(ms01_ctc_nc_gpio_cfgs, ARRAY_SIZE(ms01_ctc_nc_gpio_cfgs));
	}
#elif defined(CONFIG_MACH_CRATERQ)
	msm_gpiomux_install(craterq_gpio_configs, ARRAY_SIZE(craterq_gpio_configs));
#endif
}

Beispiel #8

0

Datei anzeigen

Datei: board-8226-gpiomux.c Projekt: 1801648284/Xiaomi_Kernel_OpenSource

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	msm_gpiomux_install(hs_uart_sw_configs, ARRAY_SIZE(hs_uart_sw_configs));

	msm_gpiomux_sdc3_install();

	msm_gpiomux_extovp_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
}

Beispiel #9

0

Datei anzeigen

Datei: board-8974-lgps11-gpiomux.c Projekt: AbdulrahmanAmir/Dorimanx-LG-G2-D802-Kernel

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#ifndef CONFIG_MACH_LGE
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

#if defined(CONFIG_MACH_LGE)
	msm_gpiomux_install(slimport_configs_rev_b,
						ARRAY_SIZE(slimport_configs_rev_b));
	printk(KERN_INFO "slimport gpio configs for rev.B upper\n");

	msm_gpiomux_install(msm_display_configs, ARRAY_SIZE(msm_display_configs));
#endif
#if 0 /* disable sensor GPIO setting (enable ADSP)*/
	msm_gpiomux_install(sensor_configs, ARRAY_SIZE(sensor_configs));
#endif
#if defined(CONFIG_LGE_SM100) || defined(CONFIG_TSPDRV)
       msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif
#ifdef CONFIG_EARJACK_DEBUGGER
	msm_gpiomux_install(msm_earjack_debugger_configs,
			ARRAY_SIZE(msm_earjack_debugger_configs));
#endif

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));
}

Beispiel #10

0

Datei anzeigen

Datei: board-8926-x10-vzw-gpiomux.c Projekt: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#ifdef CONFIG_MACH_LGE

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via X5
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_0[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_0[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}
	
	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(gpio_func_sensor_configs, ARRAY_SIZE(gpio_func_sensor_configs));
	msm_gpiomux_install(msm_hall_ic_configs, ARRAY_SIZE(msm_hall_ic_configs));
	
	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(gpio_func_i2c_configs, ARRAY_SIZE(gpio_func_i2c_configs));
	
	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if(hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_synaptics_configs, ARRAY_SIZE(msm_synaptics_configs));
		printk(KERN_ERR "[Touch] synaptics msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
	} else {
		msm_gpiomux_install(msm_atmel_s540_configs, ARRAY_SIZE(msm_atmel_s540_configs));
		printk(KERN_ERR "[Touch] atmel msm_gpiomux_install HW_REV_A configs rev : %d\n", hw_rev);
	}

	// GPIO related function <<5.NFC>>
/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */

	// GPIO related function <<6.LCD>>
	msm_gpiomux_install(gpio_func_lcd_configs,
			ARRAY_SIZE(gpio_func_lcd_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs, ARRAY_SIZE(msm_lcd_configs));
	
	// GPIO related function <<7.CAMERA>>	
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));
	
	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_install(&sd_card_det, 1);

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(gpio_func_battery_configs, ARRAY_SIZE(gpio_func_battery_configs));	
	
	// GPIO related function <<13.BT>>
	msm_gpiomux_install(gpio_func_bt_configs, ARRAY_SIZE(gpio_func_bt_configs));
	
	// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(gpio_func_fm_configs, ARRAY_SIZE(gpio_func_fm_configs));
	
	// GPIO related function <<16.WLC>>
	msm_gpiomux_install(gpio_func_wlc_configs, ARRAY_SIZE(gpio_func_wlc_configs));
	
	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
	
	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
	
	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
	
	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
	
	// GPIO related function <<21.LOGIC>>
	msm_gpiomux_install(gpio_func_logic_configs, ARRAY_SIZE(gpio_func_logic_configs));
#endif

#ifndef CONFIG_MACH_LGE	
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));


	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif
/* LGE_CHANGE_S, [BT][[email protected]], 2013-05-13 */
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */
/* LGE_CHANGE_E, [BT][[email protected]], 2013-05-13 */
msm_gpiomux_install(msm_auxpcm_configs,
		ARRAY_SIZE(msm_auxpcm_configs));

#if 0//defined(CONFIG_TSPDRV)
	msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif

    msm_gpiomux_sdc3_install();
}

Beispiel #11

0

Datei anzeigen

Datei: board-hestia-gpiomux.c Projekt: Jackeagle/android_kernel_sm_g800h_kk

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

/* Battery charging and BMS GPIO */
	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));

	msm_gpiomux_install(msm_hrm_configs,
		ARRAY_SIZE(msm_hrm_configs));

	msm_gpiomux_install(msm_sensorhub_configs,
		ARRAY_SIZE(msm_sensorhub_configs));

	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));

		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

	/*
	 * gpio mux settings for the NC GPIOs
	 */
	msm_gpiomux_install(nc_gpio_cfgs,
			ARRAY_SIZE(nc_gpio_cfgs));

	msm_gpiomux_install(hw_chkbits_cfg, ARRAY_SIZE(hw_chkbits_cfg));
	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
		msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
}

Beispiel #12

0

Datei anzeigen

Datei: board-victor-gpiomux.c Projekt: Cosimo82/Fulgor_Kernel_Lollipop

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));
	else
		msm_gpiomux_install(msm_nfc_configs,
				ARRAY_SIZE(msm_nfc_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_sdc3_install();
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));

	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));
	msm_gpiomux_install(muic_gpio_config, ARRAY_SIZE(muic_gpio_config));

	msm_gpiomux_install(msm_codec_int_gpio_configs, ARRAY_SIZE(msm_codec_int_gpio_configs));
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif

	msm_gpiomux_install(chg_pm8226_configs, ARRAY_SIZE(chg_pm8226_configs));

	if(!poweroff_charging)
	msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));

        msm_gpiomux_install(msm_lcd_det_configs, ARRAY_SIZE(msm_lcd_det_configs));
	msm_gpiomux_install_nowrite(msm_lcd_configs,ARRAY_SIZE(msm_lcd_configs));
}

Beispiel #13

0

Datei anzeigen

Datei: board-8974-sec-fresco-gpiomux.c Projekt: adis1313/android_kernel_samsung_msm8974

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#ifdef CONFIG_MFD_MAX77888
#if 0 // MCU Pin
	msm_gpiomux_install(msm8974_muic_configs, ARRAY_SIZE(msm8974_muic_configs));
#endif
#endif

#ifdef CONFIG_W1_SLAVE_DS28EL15
	msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
#endif

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if 0//defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
#endif

	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));

#if 0//!defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(es325_config, ARRAY_SIZE(es325_config));
	msm_gpiomux_install(msm8974_audio_configs, ARRAY_SIZE(msm8974_audio_configs));
	msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));
#if 0 // MCU pin
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

#if defined(CONFIG_SENSORS)
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));
#endif
	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (system_rev > 5)
		msm_gpiomux_install(msm_hdmi_ddc_configs,
				ARRAY_SIZE(msm_hdmi_ddc_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	if(system_rev > 1)
		msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#if 0
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
#if defined(CONFIG_SEC_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif
	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#ifdef CONFIG_USB_SWITCH_FSA9485
	if (system_rev >= 10)
		msm_gpiomux_install(vienna_r10_muic_configs,
				ARRAY_SIZE(vienna_r10_muic_configs));
	else
		msm_gpiomux_install(vienna_muic_configs,
				ARRAY_SIZE(vienna_muic_configs));
#endif

	if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
	} else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

#if defined(CONFIG_LEDS_AN30259A)
	msm_gpiomux_install(an30259a_led_config,
			ARRAY_SIZE(an30259a_led_config));
#endif

#ifdef CONFIG_INPUT_WACOM_HL
	msm_gpiomux_install(msm8974_wacom_configs,
		ARRAY_SIZE(msm8974_wacom_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));
}

Beispiel #14

0

Datei anzeigen

Datei: board-8974-gpiomux.c Projekt: AICP/kernel_moto_shamu

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_debug("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
	if (of_board_is_liquid())
		msm_gpiomux_install(msm_touch_i2cmode_configs,
					ARRAY_SIZE(msm_touch_i2cmode_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	if (of_board_is_cdp())
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
	else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

	if ((socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_INTERPOSERV3)
		&& of_board_is_cdp())
		msm_gpiomux_install(apq8074_interposer_config,
			ARRAY_SIZE(apq8074_interposer_config));
}

Beispiel #15

0

Datei anzeigen

Datei: board-8926-f60s-jp-gpiomux.c Projekt: Rashed97/lge_d295

void __init msm8226_init_gpiomux(void)
{
	int rc;
	int gpio_index = 0;

	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via JAGUAR
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
				for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
					gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
					msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));	

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if (hw_rev == HW_REV_0) {
		msm_gpiomux_install(msm_atmel_configs, ARRAY_SIZE(msm_atmel_configs));
		printk(KERN_ERR "[Touch] HW_REV_0 configs \n");

	} else {
		msm_gpiomux_install(msm_synaptics_configs_rev_b, ARRAY_SIZE(msm_synaptics_configs_rev_b));
		printk(KERN_ERR "[Touch] HW_REV_A.. configs \n");
	}

	// GPIO related function <<5.NFC>>
/*                                                       */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*                                                       */

	// GPIO related function <<6.LCD>>
	if (hw_rev <= HW_REV_A)
		msm_gpiomux_install_nowrite(msm_lcd_configs_A,
				ARRAY_SIZE(msm_lcd_configs_A));
	else
		msm_gpiomux_install_nowrite(msm_lcd_configs_B,
				ARRAY_SIZE(msm_lcd_configs_B));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_sdc3_install();

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));
	
	// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /*                      */

	// GPIO related function <<14.WIFI>>
#if defined (CONFIG_BCMDHD) || defined (CONFIG_BCMDHD_MODULE)
#else
	if (hw_rev == HW_REV_0)
		msm_gpiomux_install(wcnss_5wire_interface_zero,
					ARRAY_SIZE(wcnss_5wire_interface_zero));
	else
		msm_gpiomux_install(wcnss_5wire_interface_A,
					ARRAY_SIZE(wcnss_5wire_interface_A));
#endif
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(msm_auxpcm_configs,	ARRAY_SIZE(msm_auxpcm_configs));

	// GPIO related function <<16.WLC>>
	
	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));
	
	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));
	
	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));
	
	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));
	
	// GPIO related function <<21.LOGIC>>
	logic_msm_gpiomux_install();

/*                                                           */
#if defined(CONFIG_LGE_BROADCAST_TDMB)
	msm_gpiomux_install(msm8926_tdmb_configs, ARRAY_SIZE(msm8926_tdmb_configs));
#endif
/*                                                           */

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#ifndef CONFIG_MACH_LGE
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif
}

Beispiel #16

0

Datei anzeigen

Datei: board-degas-gpiomux.c Projekt: LGaljo/android_kernel_samsung_s3ve3g

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
#if defined (CONFIG_MACH_MILLETLTE_VZW)
	msm_gpiomux_install(milletltevzw_gpio_10, ARRAY_SIZE(milletltevzw_gpio_10));
#endif
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));

		msm_gpiomux_install(msm_keyboad_cypress_configs,
				ARRAY_SIZE(msm_keyboad_cypress_configs));
#elif defined(CONFIG_SEC_MILLET_PROJECT)
msm_gpiomux_install(msm_melfas_configs,
				ARRAY_SIZE(msm_melfas_configs));
#else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

#if !defined (CONFIG_SEC_MILLET_PROJECT)
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));
#endif

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
	if ( system_rev >= 0 && system_rev < 3) {
		msm_gpiomux_install(light_prox_config, ARRAY_SIZE(light_prox_config));
		msm_gpiomux_install(irled_i2c_scl_config,
						ARRAY_SIZE(irled_i2c_scl_config));
	} else {
		msm_gpiomux_install(nc_light_prox_config, ARRAY_SIZE(nc_light_prox_config));
#if defined (CONFIG_MACH_MILLETLTE_VZW) || defined(CONFIG_SEC_MILLETWIFI_COMMON)
		msm_gpiomux_install(irled_i2c_scl_config,
						ARRAY_SIZE(irled_i2c_scl_config));
#endif
	}
#endif
	msm_gpiomux_sdc3_install();


	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
	msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
  #if defined (CONFIG_SEC_MILLETLTE_COMMON)
  if ( system_rev >= 3)
  {
    msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
  }
  #else
    msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
  #endif
#if defined (CONFIG_SEC_MILLETWIFI_COMMON)
	msm_gpiomux_install(milletwifi_nc_gpio_cfgs, ARRAY_SIZE(milletwifi_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_OPEN)
msm_gpiomux_install(millet_nc_gpio_cfgs, ARRAY_SIZE(millet_nc_gpio_cfgs));
if ( system_rev >= 3){
	msm_gpiomux_install(millet_nc3_gpio_cfgs, ARRAY_SIZE(millet_nc3_gpio_cfgs));
}
#endif
#if defined (CONFIG_MACH_MILLET3G_EUR)
if ( system_rev >= 2)
	msm_gpiomux_install(millet3g_nc_gpio_cfgs, ARRAY_SIZE(millet3g_nc_gpio_cfgs));
#endif
#if defined (CONFIG_MACH_MILLETLTE_VZW)
if ( system_rev >= 1)
	msm_gpiomux_install(milletltevzw_nc_gpio_cfgs, ARRAY_SIZE(milletltevzw_nc_gpio_cfgs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
	if(!poweroff_charging)
	msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
				if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR)
				if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
				if ( system_rev >= 0 && system_rev < 5)
#endif

		{
			msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
			msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
			msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
		}
#endif
}

Beispiel #17

0

Datei anzeigen

Datei: board-8226-jag3gss-global-com-gpiomux.c Projekt: TheNotOnly/android_kernel_lge_jagnm_kk

void __init msm8226_init_gpiomux(void)
{
	int rc;
#ifdef CONFIG_MACH_LGE
	int gpio_index;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();
#endif

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#ifdef CONFIG_MACH_LGE
	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via W7 Rev 0
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.SIM>>
	// GPIO related function <<17.SLIMBUS>>
	// GPIO related function <<18.RF>>
	// GPIO related function <<19.KEY PAD>>
	// GPIO related function <<20.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch (hw_rev) {
	case HW_REV_A:
		for (gpio_index = 0; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END; gpio_index++) {
			gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
			msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
		}
		break;
	case HW_REV_B:
	default:
		for (gpio_index = 0; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END; gpio_index++) {
			gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
			msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
		}
		break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(gpio_func_sensor_configs,
			ARRAY_SIZE(gpio_func_sensor_configs));

	msm_gpiomux_install(msm_hall_ic_configs,
			ARRAY_SIZE(msm_hall_ic_configs));

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(gpio_func_i2c_configs,
			ARRAY_SIZE(gpio_func_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs,
			ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	msm_gpiomux_install(msm_synaptics_configs,
			ARRAY_SIZE(msm_synaptics_configs));

	// GPIO related function <<5.NFC>>
	/*                                                      */
#ifdef CONFIG_LGE_NFC_PN547_C2
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
	/*                                                      */


	// GPIO related function <<6.LCD>>
	msm_gpiomux_install(gpio_func_lcd_configs,
			ARRAY_SIZE(gpio_func_lcd_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs,
			ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>
	msm_gpiomux_install(gpio_func_audio_configs,
			ARRAY_SIZE(gpio_func_audio_configs));

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_install(&sd_card_det, 1);

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(gpio_func_battery_configs,
			ARRAY_SIZE(gpio_func_battery_configs));

	// GPIO related function <<13.BT>>
	/*msm_gpiomux_install(gpio_func_bt_configs,
			ARRAY_SIZE(gpio_func_bt_configs)); */
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif  /*                      */

	// GPIO related function <<14.WIFI>>
#if defined ( CONFIG_BCMDHD ) || defined ( CONFIG_BCMDHD_MODULE )
#else
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	
	// GPIO related function <<15.FM>>
	msm_gpiomux_install(gpio_func_fm_configs,
			ARRAY_SIZE(gpio_func_fm_configs));

	// GPIO related function <<16.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs,
			ARRAY_SIZE(gpio_func_sim_configs));

	// GPIO related function <<17.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs,
			ARRAY_SIZE(gpio_func_slimbus_configs));

	// GPIO related function <<18.RF>>
	msm_gpiomux_install(gpio_func_rf_configs,
			ARRAY_SIZE(gpio_func_rf_configs));

	// GPIO related function <<19.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs,
				ARRAY_SIZE(msm_keypad_configs));

	// GPIO related function <<20.LOGIC>>
	msm_gpiomux_install(gpio_func_logic_configs,
			ARRAY_SIZE(gpio_func_logic_configs));
#endif

#ifndef CONFIG_MACH_LGE
#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

#if defined(CONFIG_TSPDRV)
	msm_gpiomux_install(vibrator_configs, ARRAY_SIZE(vibrator_configs));
#endif

    msm_gpiomux_sdc3_install();
#ifdef CONFIG_SND_BRCM_FM_RADIO
    msm_gpiomux_install(msm_pri_mi2s_configs, ARRAY_SIZE(msm_pri_mi2s_configs));
#endif
}

Beispiel #18

0

Datei anzeigen

Datei: board-8974-sec-lt03-gpiomux.c Projekt: Jackeagle/android_kernel_sm_g800h_kk

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#ifdef CONFIG_MFD_MAX77888
	msm_gpiomux_install(msm8974_muic_configs, ARRAY_SIZE(msm8974_muic_configs));
#endif
	msm_gpiomux_install(msm_battery_configs, ARRAY_SIZE(msm_battery_configs));
#if !defined(CONFIG_MACH_LT03_LTE)	
	msm_gpiomux_install(msm_batteryotg_configs, ARRAY_SIZE(msm_batteryotg_configs));
#endif	

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
	msm_gpiomux_btwake_install();
#endif

	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));
#if defined(CONFIG_MACH_LT03_VZW) || defined(CONFIG_MACH_LT03_EUR) || defined(CONFIG_MACH_LT03_TMO) \
|| defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) || defined(CONFIG_MACH_LT03LGT)
	msm_gpiomux_install(spk_ext_config, ARRAY_SIZE(spk_ext_config));
#endif

	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif

#if 0
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#ifdef CONFIG_USB_SWITCH_FSA9485
	if (system_rev >= 7)
		msm_gpiomux_install(lt03_r04_muic_configs,
				ARRAY_SIZE(lt03_r04_muic_configs));
	else
		msm_gpiomux_install(lt03_muic_configs,
				ARRAY_SIZE(lt03_muic_configs));
#endif

	if (of_board_is_cdp()) {
#if 0 /* Not used at Mondrian */
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
#endif
	} else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_FB_MSM_EDP_SAMSUNG
	msm_gpiomux_install(msm8974_lcd_config,
				ARRAY_SIZE(msm8974_lcd_config));
#endif
#ifdef CONFIG_INPUT_WACOM
	msm_gpiomux_install(msm8974_wacom_configs,
			ARRAY_SIZE(msm8974_wacom_configs));
#endif
	msm_gpiomux_install(msm_grip_configs, ARRAY_SIZE(msm_grip_configs));
	msm_gpiomux_install(msm_sensors_configs, ARRAY_SIZE(msm_sensors_configs));

#if defined(CONFIG_MACH_LT03_VZW) || defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) || defined(CONFIG_MACH_LT03LGT)
	msm_gpiomux_install(ext_buck_configs, ARRAY_SIZE(ext_buck_configs));
#endif

#if defined(CONFIG_MACH_LT03_LTE)
	msm_gpiomux_install(gpio_nc_configs,ARRAY_SIZE(gpio_nc_configs));
#endif

}

Beispiel #19

0

Datei anzeigen

Datei: board-8926-e2-mpcs-gpiomux.c Projekt: TeamRegular/android_kernel_lge_e2nxx-stock

void __init msm8226_init_gpiomux(void)
{
	int rc;
	int gpio_index = 0;
	hw_rev_type hw_rev;
	hw_rev = lge_get_board_revno();

	// Device Tree Initailize
	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}
	//--------------------------------------------
	// MSM8X26 GPIO Confiuration via JAGUAR
	//--------------------------------------------
	// GPIO related function <<0.Resreved Pin>>
	// GPIO related function <<1.SENSOR>>
	// GPIO related function <<2.I2C>>
	// GPIO related function <<3.UART>>
	// GPIO related function <<4.TOUCH>>
	// GPIO related function <<5.NFC>>
	// GPIO related function <<6.LCD>>
	// GPIO related function <<7.CAMERA>>
	// GPIO related function <<8.FLASH LED>>
	// GPIO related function <<9.IRRC>>
	// GPIO related function <<10.AUDIO>>
	// GPIO related function <<11.SD CARD>>
	// GPIO related function <<12.BATTERY>>
	// GPIO related function <<13.BT>>
	// GPIO related function <<14.WIFI>>
	// GPIO related function <<15.FM>>
	// GPIO related function <<16.WLC>>
	// GPIO related function <<17.SIM>>
	// GPIO related function <<18.SLIMBUS>>
	// GPIO related function <<19.RF>>
	// GPIO related function <<20.KEY PAD>>
	// GPIO related function <<21.LOGIC>>

	// GPIO related function <<0.Resreved Pin>>
	switch ( hw_rev ){
		case HW_REV_0 :
#if 0
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_zero[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_zero[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
#endif
			break;
		case HW_REV_A :
            for ( gpio_index = 0 ; gpio_reserved_pin_rev_A[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_A[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_B :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
		case HW_REV_C :
		case HW_REV_D :
		case HW_REV_E :
		case HW_REV_1_0 :
		case HW_REV_1_1 :
		default :
			for ( gpio_index = 0 ; gpio_reserved_pin_rev_B[gpio_index] < MSM8x26_GPIO_END ; gpio_index++ ){
				gpio_func_reserved_pin_config.gpio = gpio_reserved_pin_rev_B[gpio_index];
				msm_gpiomux_install(&gpio_func_reserved_pin_config, 1);
				}
			break;
	}

	// GPIO related function <<1.SENSOR>>
	msm_gpiomux_install(msm_sensor_ic_configs, ARRAY_SIZE(msm_sensor_ic_configs));

	// GPIO related function <<2.I2C>>
	msm_gpiomux_install(msm_i2c_configs, ARRAY_SIZE(msm_i2c_configs));

	// GPIO related function <<3.UART>>
	msm_gpiomux_install(gpio_func_uart_configs, ARRAY_SIZE(gpio_func_uart_configs));

	// GPIO related function <<4.TOUCH>>
	if (hw_rev >= HW_REV_A) {
		msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		printk(KERN_ERR "[Touch] HW_REV_A configs \n");
	}

	// GPIO related function <<5.NFC>>
/*  LGE_CHANGE_S, [NFC][[email protected]], NFC Bring up */
#ifdef CONFIG_LGE_NFC_PN544_C3
	msm_gpiomux_install(msm_nfc_configs, ARRAY_SIZE(msm_nfc_configs));
#endif
/*  LGE_CHANGE_E, [NFC][[email protected]], NFC Bring up */

	// GPIO related function <<6.LCD>>
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	// GPIO related function <<7.CAMERA>>
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	// GPIO related function <<8.FLASH LED>>
	msm_gpiomux_install(gpio_func_flash_led_configs, ARRAY_SIZE(gpio_func_flash_led_configs));

	// GPIO related function <<10.AUDIO>>

	// GPIO related function <<11.SD CARD>>
	msm_gpiomux_sdc3_install();

	// GPIO related function <<12.BATTERY>>
	msm_gpiomux_install(power_configs, ARRAY_SIZE(power_configs));

	// GPIO related function <<13.BT>>
#ifdef CONFIG_LGE_BLUETOOTH
    bluetooth_msm_gpiomux_install();
#endif /* CONFIG_LGE_BLUETOOTH */

	// GPIO related function <<14.WIFI>>
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	// GPIO related function <<15.FM>>
	msm_gpiomux_install(msm_auxpcm_configs,	ARRAY_SIZE(msm_auxpcm_configs));

	// GPIO related function <<16.WLC>>
	msm_gpiomux_install(&gpio_func_wlc_config, 1);

	// GPIO related function <<17.SIM>>
	msm_gpiomux_install(gpio_func_sim_configs, ARRAY_SIZE(gpio_func_sim_configs));

	// GPIO related function <<18.SLIMBUS>>
	msm_gpiomux_install(gpio_func_slimbus_configs, ARRAY_SIZE(gpio_func_slimbus_configs));

	// GPIO related function <<19.RF>>
	msm_gpiomux_install(gpio_func_rf_configs, ARRAY_SIZE(gpio_func_rf_configs));

	// GPIO related function <<20.KEY PAD>>
	msm_gpiomux_install(msm_keypad_configs, ARRAY_SIZE(msm_keypad_configs));

	// GPIO related function <<21.LOGIC>>
	msm_gpiomux_install(ext_ldo_en_configs, ARRAY_SIZE(ext_ldo_en_configs));

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#ifndef CONFIG_MACH_LGE
	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#endif

#ifdef CONFIG_SND_BRCM_FM_RADIO
	msm_gpiomux_install(msm_pri_mi2s_configs, ARRAY_SIZE(msm_pri_mi2s_configs));
#endif
}

Beispiel #20

0

Datei anzeigen

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
	socinfo_get_version());
	msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0x5);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs, ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif

#if defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
	if(system_rev < 5)
	{
		msm_gpiomux_install(msm8974_btwifi_ldo_en_configs, ARRAY_SIZE(msm8974_btwifi_ldo_en_configs));
	}
#endif

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

#if defined(CONFIG_MACH_LT03SKT) || defined(CONFIG_MACH_LT03KTT) ||defined(CONFIG_MACH_LT03LGT)
	msm_gpiomux_install(ext_buck_configs, ARRAY_SIZE(ext_buck_configs));
#endif
	msm_gpiomux_install(msm_grip_configs, ARRAY_SIZE(msm_grip_configs));
	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();
	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#if defined(CONFIG_PN547_NFC)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#ifdef CONFIG_VIDEO_MHL_V2
	msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));
#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	msm_gpiomux_install(msm8974_audio_configs, ARRAY_SIZE(msm8974_audio_configs));
#ifdef CONFIG_INPUT_WACOM
		msm_gpiomux_install(msm8974_wacom_configs,
			ARRAY_SIZE(msm8974_wacom_configs));
#endif

	msm_gpiomux_install(msm_sensors_configs,
			ARRAY_SIZE(msm_sensors_configs));
	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

#ifdef CONFIG_USB_SWITCH_FSA9485
	if (system_rev >= 7)
		msm_gpiomux_install(lt03_r04_muic_configs,
				ARRAY_SIZE(lt03_r04_muic_configs));
	else
		msm_gpiomux_install(lt03_muic_configs,
				ARRAY_SIZE(lt03_muic_configs));
#endif
	msm_gpiomux_install(gpio_nc_configs,ARRAY_SIZE(gpio_nc_configs));
#ifdef CONFIG_FB_MSM_EDP_SAMSUNG
	msm_gpiomux_install(msm8974_lcd_config,
			ARRAY_SIZE(msm8974_lcd_config));
#endif
}

Beispiel #21

0

Datei anzeigen

Datei: board-8226-gpiomux.c Projekt: Hashcode/android_kernel_samsung_hlte

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_synaptics_configs,
				ARRAY_SIZE(msm_synaptics_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
#if defined (CONFIG_SEC_MILLET_PROJECT) || defined(CONFIG_SEC_MATISSE_PROJECT) || defined(CONFIG_SEC_BERLUTI_PROJECT)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#endif
	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
#if defined(CONFIG_MACH_MILLETLTE_OPEN)
				if ( system_rev >= 0 && system_rev < 3)
#elif defined (CONFIG_MACH_MILLET3G_EUR) || defined(CONFIG_MACH_BERLUTI3G_EUR)
				if ( system_rev >= 2 && system_rev < 4)
#elif defined(CONFIG_MACH_MILLETWIFI_OPEN)
				if ( system_rev >= 0 && system_rev < 5)
#endif

		{
			msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
			msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
		}
#endif
}

Beispiel #22

0

Datei anzeigen

Datei: board-8974-sec-j-gpiomux.c Projekt: Hypercore/leanKernel-note3

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
	socinfo_get_version());
	msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0x5);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#if !defined(CONFIG_MACH_KS01SKT) && !defined(CONFIG_MACH_KS01KTT)\
	&& !defined(CONFIG_MACH_KS01LGT)
	msm_gpiomux_install(msm_blsp2_uart7_configs, ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif

#if defined(CONFIG_MACH_KS01SKT) || defined(CONFIG_MACH_KS01KTT)\
	|| defined(CONFIG_MACH_KS01LGT)	&& defined(CONFIG_BT_BCM4335)
	msm_gpiomux_btuart_install();
#endif

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
#if !defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

#ifdef CONFIG_MACH_KS01
	msm_gpiomux_install(&sd_card_det, 1);

	if(system_rev < 3)
		msm_gpiomux_install(wcnss_5wire_interface,
					ARRAY_SIZE(wcnss_5wire_interface));
	else
		msm_gpiomux_sdc3_install();
#else
	msm_gpiomux_sdc3_install();
#endif

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

#if !defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#if defined(CONFIG_BCM2079X_NFC_I2C)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) */

#if defined(CONFIG_LEDS_AN30259A)
#if defined(CONFIG_MACH_KS01SKT) || defined(CONFIG_MACH_KS01KTT)\
		|| defined(CONFIG_MACH_KS01LGT)

	if (system_rev < 7) {
		msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
	}
	else
	{
		msm_gpiomux_install(an30259a_led_config_rev7,
				ARRAY_SIZE(an30259a_led_config_rev7));
	}
#else
	msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
#endif
#endif

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_SENSORS_HALL
	msm_gpiomux_install(msm8974_hall_configs, ARRAY_SIZE(msm8974_hall_configs));
#endif

#ifdef CONFIG_KEYBOARD_CYPRESS_TOUCH
	msm_gpiomux_install(cypress_touch_configs, ARRAY_SIZE(cypress_touch_configs));
#endif

	msm_gpiomux_install(fpga_tflash, ARRAY_SIZE(fpga_tflash));

	msm_gpiomux_install(nc_configs,
			ARRAY_SIZE(nc_configs));
}

Beispiel #23

0

Datei anzeigen

Datei: board-8974-sec-ks01-gpiomux.c Projekt: adis1313/android_kernel_samsung_msm8974

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
		socinfo_get_version());
	if (socinfo_get_version() >= 0x20000)
		msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0xf);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if 0 //defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
#endif

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
#if !defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));


	msm_gpiomux_install(&sd_card_det, 1);
	msm_gpiomux_sdc3_install();

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(fuel_i2c_config, ARRAY_SIZE(fuel_i2c_config));
#if !defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#if defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
#endif
	msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#if defined(CONFIG_LEDS_AN30259A)
	if (system_rev < 7) {
		msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
	}
	else
	{
		msm_gpiomux_install(an30259a_led_config_rev7,
				ARRAY_SIZE(an30259a_led_config_rev7));
	}
#endif

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_SENSORS_HALL
	msm_gpiomux_install(msm8974_hall_configs, ARRAY_SIZE(msm8974_hall_configs));
#endif

#if defined(CONFIG_KEYBOARD_CYPRESS_TOUCHKEY_KS01)
	msm_gpiomux_install(cypress_touch_configs, ARRAY_SIZE(cypress_touch_configs));
#endif

	msm_gpiomux_install(fpga_tflash, ARRAY_SIZE(fpga_tflash));

#if defined(CONFIG_TDMB) || defined(CONFIG_TDMB_MODULE)
	msm_gpiomux_install(tdmb_int_config, ARRAY_SIZE(tdmb_int_config));
#endif

#if defined(CONFIG_MACH_KS01EUR)
	msm_gpiomux_install(batt_rem_alarm_configs,
			ARRAY_SIZE(batt_rem_alarm_configs));
#endif

	msm_gpiomux_install(nc_configs,
			ARRAY_SIZE(nc_configs));
#if defined(CONFIG_MACH_KS01EUR)
	msm_gpiomux_install(wireless_charge_configs, ARRAY_SIZE(wireless_charge_configs));
#endif
}

Beispiel #24

0

Datei anzeigen

Datei: board-8974-sec-f-gpiomux.c Projekt: Cosimo82/Fulgor_Kernel_Lollipop

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	pr_err("%s:%d socinfo_get_version %x\n", __func__, __LINE__,
	socinfo_get_version());
	msm_tlmm_misc_reg_write(TLMM_SPARE_REG, 0x5);

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	msm_gpiomux_install(msm_blsp2_uart7_configs, ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif

#if 0 //defined(CONFIG_BT_BCM4335) || defined(CONFIG_BT_BCM4339)
	msm_gpiomux_btuart_install();
#endif

	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(ext_buck_configs, ARRAY_SIZE(ext_buck_configs));
	msm_gpiomux_install(hw_rev_configs, ARRAY_SIZE(hw_rev_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));
#if !defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));
#endif

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

#ifdef CONFIG_MACH_KS01
	if(system_rev < 3)
		msm_gpiomux_install(wcnss_5wire_interface,
					ARRAY_SIZE(wcnss_5wire_interface));
	else
		msm_gpiomux_sdc3_install();
#else
	msm_gpiomux_sdc3_install();
#endif

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	msm_gpiomux_install(es325_config, ARRAY_SIZE(es325_config));
	msm_gpiomux_install(ear_send_end_config, ARRAY_SIZE(ear_send_end_config));

#if !defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#if defined(CONFIG_SENSORS_SSP)
	msm_gpiomux_install(ssp_configs,
				ARRAY_SIZE(ssp_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));

	if (system_rev > 6)
		msm_gpiomux_install(msm_hdmi_ddc_configs,
				ARRAY_SIZE(msm_hdmi_ddc_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	if(system_rev > 1)
		msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#if defined(CONFIG_BCM2079X_NFC_I2C) || defined(CONFIG_NFC_PN547)
	msm_gpiomux_install(msm_nfc_configs,
	ARRAY_SIZE(msm_nfc_configs));
	if(system_rev == 9 || system_rev == 10) { // over-write I2C config, rev09,10 has no external Pull-up register.
		msm_gpiomux_install(msm_nfc_i2c_configs_rev09,
		ARRAY_SIZE(msm_nfc_i2c_configs_rev09));
	}
#endif

#if defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE)
	msm_gpiomux_wlan_host_wakeup_install();
#endif /* defined(CONFIG_BCM4335) || defined(CONFIG_BCM4335_MODULE) || defined(CONFIG_BCM4339) || defined(CONFIG_BCM4339_MODULE) */

#if defined(CONFIG_LEDS_AN30259A)
#if defined(CONFIG_MACH_KS01SKT) || defined(CONFIG_MACH_KS01KTT)\
		|| defined(CONFIG_MACH_KS01LGT)

	if (system_rev < 7) {
		msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
	}
	else
	{
		msm_gpiomux_install(an30259a_led_config_rev7,
				ARRAY_SIZE(an30259a_led_config_rev7));
	}
#else
	msm_gpiomux_install(an30259a_led_config,
				ARRAY_SIZE(an30259a_led_config));
#endif
#endif

	msm_gpiomux_install(msm8974_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_auxpcm_configs));

#if !defined(CONFIG_BT_BCM4335) && !defined(CONFIG_BT_BCM4339)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

#if defined(CONFIG_GSM_MODEM_SPRD6500)
	msm_gpiomux_sc6500_spi_install();
#endif

#ifdef CONFIG_SENSORS_HALL
	msm_gpiomux_install(msm8974_hall_configs, ARRAY_SIZE(msm8974_hall_configs));
#endif

#ifdef CONFIG_W1_SLAVE_DS28EL15
	msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
#endif

#ifdef CONFIG_SENSORS_VFS61XX
	msm_gpiomux_install(msm8974_fingerprint_configs,
		ARRAY_SIZE(msm8974_fingerprint_configs));
	if (system_rev > 2)
		msm_gpiomux_install(msm8974_fingerprint_rev03_configs,
			ARRAY_SIZE(msm8974_fingerprint_rev03_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

#ifdef CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI
	printk(KERN_INFO "%s:[TSP] touch config.\n",__func__);
	msm_gpiomux_install(msm8974_touch_config,
			ARRAY_SIZE(msm8974_touch_config));
#endif

	msm_gpiomux_install(msm8974_te_configs, ARRAY_SIZE(msm8974_te_configs));
	msm_gpiomux_install(msm8974_oled_id_configs, ARRAY_SIZE(msm8974_oled_id_configs));
	msm_gpiomux_install(msm8974_uart_config, ARRAY_SIZE(msm8974_uart_config));
	msm_gpiomux_install(msm8974_fpga_config, ARRAY_SIZE(msm8974_fpga_config));
}

Beispiel #25

0

Datei anzeigen

Datei: board-8974-sec-kactive-gpiomux.c Projekt: Hashcode/android_kernel_samsung_hlte

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm_eth_configs, \
			ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
#if !defined(CONFIG_BT_BCM4354)
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
#endif
#if defined(CONFIG_BT_BCM4354)
	msm_gpiomux_btuart_install();
#endif
#if defined(CONFIG_WCNSS_CORE)
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
#endif
	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	if (system_rev >= 4)
		msm_gpiomux_install(es705_config, ARRAY_SIZE(es705_config));
	
	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(msm_sensor_configs_dragonboard, \
				ARRAY_SIZE(msm_sensor_configs_dragonboard));
	else
		msm_gpiomux_install(msm_sensor_configs, \
				ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

#if !defined(CONFIG_WCNSS_CORE)
	msm_gpiomux_sdc3_install();
#endif

	if (!(of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));
	if (system_rev < 4)
		msm_gpiomux_install(msm_es705_config, ARRAY_SIZE(msm_es705_config));
#if !defined(CONFIG_TDMB)
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));
#endif
#ifdef CONFIG_GPIO_MC5587
		msm_gpiomux_install(msm8974_gpioexpander_configs,
				ARRAY_SIZE(msm8974_gpioexpander_configs));
#endif

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
#ifdef CONFIG_VIDEO_MHL_V2
	msm_gpiomux_install(mhl_configs, ARRAY_SIZE(mhl_configs));
#endif
#ifdef CONFIG_FB_MSM_MDSS_HDMI_MHL_SII8334
	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));
#endif

	if (of_board_is_liquid() ||
	    (of_board_is_dragonboard() && machine_is_apq8074()))
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	if (of_board_is_cdp())
		msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));
	else if (of_board_is_liquid() || of_board_is_fluid() ||
						of_board_is_mtp())
		msm_gpiomux_install(msm_epm_configs,
				ARRAY_SIZE(msm_epm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

#if !defined(CONFIG_BT_BCM4354)
	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));
#endif

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));

	msm_gpiomux_install(fuel_i2c_config,
			ARRAY_SIZE(fuel_i2c_config));

#if defined(CONFIG_SENSORS_SSP)
		msm_gpiomux_install(ssp_configs, ARRAY_SIZE(ssp_configs));
#endif
#ifdef CONFIG_SENSORS_VFS61XX
	msm_gpiomux_install(msm8974_fingerprint_configs,
		ARRAY_SIZE(msm8974_fingerprint_configs));
#endif
#if defined(CONFIG_NFC_PN547) || defined(CONFIG_BCM2079X_NFC_I2C)
		msm_gpiomux_install(msm_nfc_configs,
			ARRAY_SIZE(msm_nfc_configs));
#endif

		msm_gpiomux_install(msm_cis_spi_configs,
			ARRAY_SIZE(msm_cis_spi_configs));
		msm_gpiomux_install(msm_af_configs,
			ARRAY_SIZE(msm_af_configs));
	msm_gpiomux_install(gpio_nc_configs, ARRAY_SIZE(gpio_nc_configs));

}

Beispiel #26

0

Datei anzeigen

Datei: board-8974-gpiomux.c Projekt: Cl3Kener/UBER-L

void __init msm_8974_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_blsp_configs, ARRAY_SIZE(msm_blsp_configs));
	msm_gpiomux_install(msm_blsp2_uart7_configs,
			 ARRAY_SIZE(msm_blsp2_uart7_configs));
	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));
	if (of_board_is_liquid())
		msm_gpiomux_install_nowrite(ath_gpio_configs,
					ARRAY_SIZE(ath_gpio_configs));
	msm_gpiomux_install(msm8974_slimbus_config,
			ARRAY_SIZE(msm8974_slimbus_config));

	msm_gpiomux_install(msm_touch_configs, ARRAY_SIZE(msm_touch_configs));
		msm_gpiomux_install(hap_lvl_shft_config,
				ARRAY_SIZE(hap_lvl_shft_config));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	msm_gpiomux_install(&sd_card_det, 1);

	if (machine_is_apq8074() && (of_board_is_liquid() || \
	    of_board_is_dragonboard()))
		msm_gpiomux_sdc3_install();

	msm_gpiomux_sdc4_install();

	msm_gpiomux_install(msm_taiko_config, ARRAY_SIZE(msm_taiko_config));

	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
	msm_gpiomux_install(msm_hsic_hub_configs,
				ARRAY_SIZE(msm_hsic_hub_configs));

	msm_gpiomux_install(msm_hdmi_configs, ARRAY_SIZE(msm_hdmi_configs));
	if (of_board_is_fluid())
		msm_gpiomux_install(msm_mhl_configs,
				    ARRAY_SIZE(msm_mhl_configs));

	if (of_board_is_liquid())
		msm_gpiomux_install(msm8974_pri_ter_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_ter_auxpcm_configs));
	else
		msm_gpiomux_install(msm8974_pri_pri_auxpcm_configs,
				 ARRAY_SIZE(msm8974_pri_pri_auxpcm_configs));

	msm_gpiomux_install(msm8974_sec_auxpcm_configs,
				 ARRAY_SIZE(msm8974_sec_auxpcm_configs));

	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	if (of_board_is_rumi())
		msm_gpiomux_install(msm_rumi_blsp_configs,
				    ARRAY_SIZE(msm_rumi_blsp_configs));

	if (socinfo_get_platform_subtype() == PLATFORM_SUBTYPE_MDM)
		msm_gpiomux_install(mdm_configs,
			ARRAY_SIZE(mdm_configs));

	if (of_board_is_dragonboard() && machine_is_apq8074())
		msm_gpiomux_install(apq8074_dragonboard_ts_config,
			ARRAY_SIZE(apq8074_dragonboard_ts_config));
}

Beispiel #27

0

Datei anzeigen

Datei: board-ms01-gpiomux.c Projekt: Illusion-MOD/SM-G710K_Illusion_kernel

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	/* Keypad */
	msm_gpiomux_install(msm_keypad_configs,
		ARRAY_SIZE(msm_keypad_configs));

	/* HallSensors */
	msm_gpiomux_install(msm_hall_configs,
		ARRAY_SIZE(msm_hall_configs));

	/* BLSP */
	msm_gpiomux_install(msm_blsp_configs,
		ARRAY_SIZE(msm_blsp_configs));
	/*HW */
	msm_gpiomux_install(hw_rev_configs,
	ARRAY_SIZE(hw_rev_configs));


	/* WCNSS */
	msm_gpiomux_install(wcnss_5wire_interface,
		ARRAY_SIZE(wcnss_5wire_interface));

	/*T_FLASH_DETECT */
	msm_gpiomux_install(&sd_card_det, 1);

	/* TX_GTR */
	msm_gpiomux_install(msm8226_tx_gtr_configs,
		ARRAY_SIZE(msm8226_tx_gtr_configs));

	/* LCD */
	msm_gpiomux_install_nowrite(msm_lcd_configs,
		ARRAY_SIZE(msm_lcd_configs));

	/* Camera */
	msm_gpiomux_install(msm_csensor_configs,
		ARRAY_SIZE(msm_csensor_configs));

	/* Touch */
	msm_gpiomux_install(msm_melfas_configs,
		ARRAY_SIZE(msm_melfas_configs));

#if !defined(CONFIG_MACH_MS01_KOR_LTE)
	/* Touch Key */
	msm_gpiomux_install(msm_keyboad_cypress_configs,
		ARRAY_SIZE(msm_keyboad_cypress_configs));
#endif
#ifdef CONFIG_SEC_NFC_I2C
	/* NFC */
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));
#endif

	/* Sensors */
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));

	/* SDCC3 */
	msm_gpiomux_sdc3_install();

	/* Codec */
	msm_gpiomux_install(msm_cdc_reset_config,
		ARRAY_SIZE(msm_cdc_reset_config));

	/* Earjack */
	msm_gpiomux_install(msm_earjack_gpio_configs,
		ARRAY_SIZE(msm_earjack_gpio_configs));

	/* MUIC */
	msm_gpiomux_install(muic_configs,
			ARRAY_SIZE(muic_configs));

	/* NC */
	msm_gpiomux_install(berluti3g_nc_gpio_cfgs, ARRAY_SIZE(berluti3g_nc_gpio_cfgs));
#if defined(CONFIG_MACH_MS01_EUR_LTE) || defined(CONFIG_MACH_MS01_KOR_LTE)
	msm_gpiomux_install(nc_configs, ARRAY_SIZE(nc_configs));
#endif
}

Beispiel #28

0

Datei anzeigen

Datei: board-atlantic-gpiomux.c Projekt: MI2S/android_kernel_samsung_ms013g

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

/* Battery charging and BMS GPIO */
	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));

#if defined (CONFIG_SEC_ATLANTICLTE_COMMON)
        msm_gpiomux_install(msm_lte_chg_configs, ARRAY_SIZE(msm_lte_chg_configs));
#endif

#if defined (CONFIG_SEC_ATLANTIC_PROJECT)
	msm_gpiomux_install(msm_chg_det_configs, ARRAY_SIZE(msm_chg_det_configs));
#endif

#if !defined (CONFIG_MACH_ATLANTIC3GEUR_OPEN)
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));
#endif

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif

#if defined(CONFIG_SEC_ATLANTICLTE_COMMON)
	msm_gpiomux_install(expander_configs,
			ARRAY_SIZE(expander_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
#if defined (CONFIG_MACH_BERLUTI3G_EUR)
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));

		msm_gpiomux_install(msm_keyboad_cypress_configs,
				ARRAY_SIZE(msm_keyboad_cypress_configs));
#else
		msm_gpiomux_install(msm_cypress_configs,
				ARRAY_SIZE(msm_cypress_configs));
#endif
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));

	if (system_rev >= 1)
		msm_gpiomux_install(msm8974_cover_id_config, ARRAY_SIZE(msm8974_cover_id_config));
	else
		msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

#ifdef CONFIG_SENSORS_VFS61XX
	msm_gpiomux_install(msm_fingerprint_configs, ARRAY_SIZE(msm_fingerprint_configs));
#endif

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));
/*
	msm_gpiomux_install(msm_auxpcm_configs,
			ARRAY_SIZE(msm_auxpcm_configs));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));
*/
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));

	msm_gpiomux_sdc3_install();

	/*
	 * HSIC STROBE gpio is also used by the ethernet. Install HSIC
	 * gpio mux config only when HSIC is enabled. HSIC config will
	 * be disabled when ethernet config is enabled.
	 */
#ifdef CONFIG_USB_EHCI_MSM_HSIC
	if (machine_is_msm8926()) {
		msm_hsic_configs[0].gpio = 119; /* STROBE */
		msm_hsic_configs[1].gpio = 120; /* DATA */
	}
	msm_gpiomux_install(msm_hsic_configs, ARRAY_SIZE(msm_hsic_configs));
#endif
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
#ifdef CONFIG_SND_SOC_ES325_ATLANTIC
	msm_gpiomux_install(msm_es325_config, ARRAY_SIZE(msm_es325_config));
#endif
#ifdef CONFIG_SND_SOC_MAX98504
	msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
#endif
#if defined (CONFIG_MACH_ATLANTIC3GEUR_OPEN)
	msm_gpiomux_install(nc_configs, ARRAY_SIZE(nc_configs));
#endif
	/* Install HW_REV GPIO configurations */
	msm_gpiomux_install(atlantic_hw_rev_cfgs, ARRAY_SIZE(atlantic_hw_rev_cfgs));
	/* Install NC GPIO configurations */
#if defined(CONFIG_MACH_ATLANTICLTE_ATT)
        msm_gpiomux_install(atlantic_att_nc_gpios, ARRAY_SIZE(atlantic_att_nc_gpios));
#endif
}

Beispiel #29

0

Datei anzeigen

Datei: board-degas-gpiomux.c Projekt: Illusion-MOD/SM-G710K_Illusion_kernel

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

#if defined(CONFIG_KS8851) || defined(CONFIG_KS8851_MODULE)
	msm_gpiomux_install(msm_eth_configs, ARRAY_SIZE(msm_eth_configs));
#endif
	msm_gpiomux_install(msm_keypad_configs,
			ARRAY_SIZE(msm_keypad_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_blsp_configs,
			ARRAY_SIZE(msm_skuf_blsp_configs));
	else
		msm_gpiomux_install(msm_blsp_configs,
			ARRAY_SIZE(msm_blsp_configs));

	msm_gpiomux_install(wcnss_5wire_interface,
				ARRAY_SIZE(wcnss_5wire_interface));

	msm_gpiomux_install(&sd_card_det, 1);
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_goodix_configs,
				ARRAY_SIZE(msm_skuf_goodix_configs));
	else
		msm_gpiomux_install(msm_melfas_configs,
				ARRAY_SIZE(msm_melfas_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
	if (of_board_is_skuf())
		msm_gpiomux_install(msm_skuf_nfc_configs,
				ARRAY_SIZE(msm_skuf_nfc_configs));
#endif
	msm_gpiomux_install_nowrite(msm_lcd_configs,
			ARRAY_SIZE(msm_lcd_configs));

	msm_gpiomux_install(msm_sensor_configs, ARRAY_SIZE(msm_sensor_configs));

	if (of_board_is_skuf())
		msm_gpiomux_install(msm_sensor_configs_skuf_plus,
			ARRAY_SIZE(msm_sensor_configs_skuf_plus));

	if (of_board_is_cdp() || of_board_is_mtp() || of_board_is_xpm())
		msm_gpiomux_install(usb_otg_sw_configs,
					ARRAY_SIZE(usb_otg_sw_configs));

#if defined (CONFIG_SEC_DEGASLTE_COMMON)
	msm_gpiomux_install(msm_nativesensors_configs,ARRAY_SIZE(msm_nativesensors_configs));
#if !defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(irled_i2c_scl_config, ARRAY_SIZE(irled_i2c_scl_config));
#endif
	msm_gpiomux_install(ovp_enable_configs, ARRAY_SIZE(ovp_enable_configs));
#endif
	msm_gpiomux_sdc3_install();


	msm_gpiomux_install(msm_ta_nchg_configs, ARRAY_SIZE(msm_ta_nchg_configs));
	msm_gpiomux_install(msm_ta_int_n_configs, ARRAY_SIZE(msm_ta_int_n_configs));
#if defined(CONFIG_SAMSUNG_JACK)
	msm_gpiomux_install(msm_earjack_gpio_configs, ARRAY_SIZE(msm_earjack_gpio_configs));
#endif
	if(!poweroff_charging)
		msm_gpiomux_install(wcdcodec_reset_cfg, ARRAY_SIZE(wcdcodec_reset_cfg));
#ifdef CONFIG_SND_SOC_MAX98504
	msm_gpiomux_install(msm8226_tertiary_mi2s_configs,ARRAY_SIZE(msm8226_tertiary_mi2s_configs));
	msm_gpiomux_install(msm8226_blsp_codec_configs,ARRAY_SIZE(msm8226_blsp_codec_configs));
	msm_gpiomux_install(msm8226_amp_int_configs,ARRAY_SIZE(msm8226_amp_int_configs));
#endif
#if defined (CONFIG_MACH_DEGASLTE_SPR) || defined(CONFIG_MACH_DEGASLTE_VZW) || defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(degaslte_spr_nc_gpios, ARRAY_SIZE(degaslte_spr_nc_gpios));
	msm_gpiomux_install(degasltespr_gpio_10, ARRAY_SIZE(degasltespr_gpio_10));
#endif

#if defined(CONFIG_MACH_DEGASLTE_SBM)
	msm_gpiomux_install(degaslte_sbm_gpios, ARRAY_SIZE(degaslte_sbm_gpios));
#endif
}

Beispiel #30

0

Datei anzeigen

Datei: board-berluti-gpiomux.c Projekt: Cosimo82/Fulgor_Kernel_Lollipop

void __init msm8226_init_gpiomux(void)
{
	int rc;

	rc = msm_gpiomux_init_dt();
	if (rc) {
		pr_err("%s failed %d\n", __func__, rc);
		return;
	}

	/* Keypad */
	msm_gpiomux_install(msm_keypad_configs,
		ARRAY_SIZE(msm_keypad_configs));

	/* HallSensors */
	msm_gpiomux_install(msm_hall_configs,
		ARRAY_SIZE(msm_hall_configs));

	/* BLSP */
	msm_gpiomux_install(msm_blsp_configs,
		ARRAY_SIZE(msm_blsp_configs));

	/* WCNSS */
	msm_gpiomux_install(wcnss_5wire_interface,
		ARRAY_SIZE(wcnss_5wire_interface));

	/* TX_GTR */
	msm_gpiomux_install(msm8226_tx_gtr_configs,
		ARRAY_SIZE(msm8226_tx_gtr_configs));

	/* LCD */
	msm_gpiomux_install_nowrite(msm_lcd_configs,
		ARRAY_SIZE(msm_lcd_configs));

	/* Camera */
	msm_gpiomux_install(msm_csensor_configs,
		ARRAY_SIZE(msm_csensor_configs));

	/* Touch */
	msm_gpiomux_install(msm_cypress_configs,
		ARRAY_SIZE(msm_cypress_configs));

	/* Touch Key */
	msm_gpiomux_install(msm_keyboad_cypress_configs,
		ARRAY_SIZE(msm_keyboad_cypress_configs));

	/* NFC */
	msm_gpiomux_install(msm_nfc_configs,
		ARRAY_SIZE(msm_nfc_configs));

	/* Sensors */
	msm_gpiomux_install(msm_sensors_configs,
		ARRAY_SIZE(msm_sensors_configs));

	/* Cover ID */
	msm_gpiomux_install(msm_cover_id_configs,
		ARRAY_SIZE(msm_cover_id_configs));

	/* SDCC3 */
	msm_gpiomux_sdc3_install();

	/* Earjack */
	msm_gpiomux_install(msm_earjack_gpio_configs,
		ARRAY_SIZE(msm_earjack_gpio_configs));

	/* MUIC */
	msm_gpiomux_install(muic_configs,
 		ARRAY_SIZE(muic_configs));

	/* HW_REV Pin */
	msm_gpiomux_install(hwrev_configs,
		ARRAY_SIZE(hwrev_configs));

	/* TOUCH_3P3_EN */
	msm_gpiomux_install(msm8226_touch_3p3_en_configs,
		ARRAY_SIZE(msm8226_touch_3p3_en_configs));

	/* NC */
	msm_gpiomux_install(berluti_nc_gpio_cfgs, ARRAY_SIZE(berluti_nc_gpio_cfgs));
}