/*
* Get MCLK and set clock rate, then enable it
*
* This interface is used for codecs who are using MCLK provided
* by saif.
*/
int mxs_saif_get_mclk(unsigned int saif_id, unsigned int mclk,
unsigned int rate)
{
struct mxs_saif *saif = mxs_saif[saif_id];
u32 stat;
int ret;
struct mxs_saif *master_saif;
if (!saif)
return -EINVAL;
/* Clear Reset */
__raw_writel(BM_SAIF_CTRL_SFTRST,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
/* FIXME: need clear clk gate for register r/w */
__raw_writel(BM_SAIF_CTRL_CLKGATE,
saif->base + SAIF_CTRL + MXS_CLR_ADDR);
master_saif = mxs_saif_get_master(saif);
if (saif != master_saif) {
dev_err(saif->dev, "can not get mclk from a non-master saif\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(saif->dev, "error: busy\n");
return -EBUSY;
}
saif->mclk_in_use = 1;
ret = mxs_saif_set_clk(saif, mclk, rate);
if (ret)
return ret;
ret = clk_prepare_enable(saif->clk);
if (ret)
return ret;
/* enable MCLK output */
__raw_writel(BM_SAIF_CTRL_RUN,
saif->base + SAIF_CTRL + MXS_SET_ADDR);
return 0;
}
/*
* Should only be called when port is inactive.
* although can be called multiple times by upper layers.
*/
static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
struct mxs_saif *master_saif;
u32 scr, stat;
int ret;
master_saif = mxs_saif_get_master(saif);
if (!master_saif)
return -EINVAL;
/* mclk should already be set */
if (!saif->mclk && saif->mclk_in_use) {
dev_err(cpu_dai->dev, "set mclk first\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (!saif->mclk_in_use && (stat & BM_SAIF_STAT_BUSY)) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
/*
* Set saif clk based on sample rate.
* If mclk is used, we also set mclk, if not, saif->mclk is
* default 0, means not used.
*/
ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params));
if (ret) {
dev_err(cpu_dai->dev, "unable to get proper clk\n");
return ret;
}
if (saif != master_saif) {
/*
* Set an initial clock rate for the saif internal logic to work
* properly. This is important when working in EXTMASTER mode
* that uses the other saif's BITCLK&LRCLK but it still needs a
* basic clock which should be fast enough for the internal
* logic.
*/
clk_enable(saif->clk);
ret = clk_set_rate(saif->clk, 24000000);
clk_disable(saif->clk);
if (ret)
return ret;
ret = clk_prepare(master_saif->clk);
if (ret)
return ret;
}
scr = __raw_readl(saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
break;
case SNDRV_PCM_FORMAT_S20_3LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
case SNDRV_PCM_FORMAT_S24_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
default:
return -EINVAL;
}
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* enable TX mode */
scr &= ~BM_SAIF_CTRL_READ_MODE;
} else {
/* enable RX mode */
scr |= BM_SAIF_CTRL_READ_MODE;
}
__raw_writel(scr, saif->base + SAIF_CTRL);
return 0;
}
/*
* Should only be called when port is inactive.
* although can be called multiple times by upper layers.
*/
static int mxs_saif_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct mxs_saif *saif = snd_soc_dai_get_drvdata(cpu_dai);
u32 scr, stat;
int ret;
/* mclk should already be set */
if (!saif->mclk && saif->mclk_in_use) {
dev_err(cpu_dai->dev, "set mclk first\n");
return -EINVAL;
}
stat = __raw_readl(saif->base + SAIF_STAT);
if (stat & BM_SAIF_STAT_BUSY) {
dev_err(cpu_dai->dev, "error: busy\n");
return -EBUSY;
}
/*
* Set saif clk based on sample rate.
* If mclk is used, we also set mclk, if not, saif->mclk is
* default 0, means not used.
*/
ret = mxs_saif_set_clk(saif, saif->mclk, params_rate(params));
if (ret) {
dev_err(cpu_dai->dev, "unable to get proper clk\n");
return ret;
}
scr = __raw_readl(saif->base + SAIF_CTRL);
scr &= ~BM_SAIF_CTRL_WORD_LENGTH;
scr &= ~BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(0);
break;
case SNDRV_PCM_FORMAT_S20_3LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(4);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
case SNDRV_PCM_FORMAT_S24_LE:
scr |= BF_SAIF_CTRL_WORD_LENGTH(8);
scr |= BM_SAIF_CTRL_BITCLK_48XFS_ENABLE;
break;
default:
return -EINVAL;
}
/* Tx/Rx config */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* enable TX mode */
scr &= ~BM_SAIF_CTRL_READ_MODE;
} else {
/* enable RX mode */
scr |= BM_SAIF_CTRL_READ_MODE;
}
__raw_writel(scr, saif->base + SAIF_CTRL);
return 0;
}
